diff options
91 files changed, 20008 insertions, 1 deletions
diff --git a/.gitignore b/.gitignore index c62842976bdb..32d6877c431b 100644 --- a/.gitignore +++ b/.gitignore @@ -82,6 +82,7 @@ modules.builtin # git files that we don't want to ignore even if they are dot-files # !.gitignore +!.gitupstream !.mailmap !.cocciconfig !.clang-format @@ -114,7 +115,6 @@ GTAGS # id-utils files ID -*.orig *~ \#*# diff --git a/.gitupstream b/.gitupstream new file mode 100644 index 000000000000..429ecb854840 --- /dev/null +++ b/.gitupstream @@ -0,0 +1 @@ +https://android.googlesource.com/kernel/msm diff --git a/arch/arm64/boot/dts/vendor/.gitupstream b/arch/arm64/boot/dts/vendor/.gitupstream new file mode 100644 index 000000000000..364ad58a8b5a --- /dev/null +++ b/arch/arm64/boot/dts/vendor/.gitupstream @@ -0,0 +1 @@ +https://android.googlesource.com/kernel/msm-extra/devicetree diff --git a/arch/arm64/boot/dts/vendor/bindings/display/qcom b/arch/arm64/boot/dts/vendor/bindings/display/qcom new file mode 120000 index 000000000000..2bff26e7eeaa --- /dev/null +++ b/arch/arm64/boot/dts/vendor/bindings/display/qcom @@ -0,0 +1 @@ +../../qcom/display/bindings
\ No newline at end of file diff --git a/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-cci.txt b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-cci.txt new file mode 100644 index 000000000000..59651a354157 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-cci.txt @@ -0,0 +1,817 @@ +* Qualcomm Technologies, Inc. MSM CCI + +CCI (Camera Control Interface) is module that is use for camera sensor module +I2C communication. + +======================= +Required Node Structure +======================= +The camera CCI node must be described in two levels of device nodes. The +first level describe the overall CCI node structure. Second level nodes +describe camera sensor submodule nodes which is using CCI for +i2c communication. + +====================================== +First Level Node - CCI device +====================================== + +- compatible + Usage: required + Value type: <string> + Definition: Should be "qcom,cci". + +- cell-index: cci hardware core index + Usage: required + Value type: <u32> + Definition: Should specify the Hardware index id. + +- reg + Usage: required + Value type: <u32> + Definition: offset and length of the register set + for the device for the cci operating in + compatible mode. + +- reg-names + Usage: required + Value type: <string> + Definition: Should specify relevant names to each + reg property defined. + +- interrupts + Usage: required + Value type: <u32> + Definition: Interrupt associated with CCI HW. + +- interrupt-names + Usage: required + Value type: <string> + Definition: Name of the interrupt. + +- gpios + Usage: required + Value type: <phandle> + Definition: should specify the gpios to be used for the CCI. + +- gpio-req-tbl-num + Usage: required + Value type: <u32> + Definition: should specify the gpio table index. + +- gpio-req-tbl-flags + Usage: required + Value type: <u32> + Definition: should specify the gpio functions. + +- gpio-req-tbl-label + Usage: required + Value type: <string> + Definition: should specify the gpio labels in + gpio-req-tbl-num property (in the same order) + +- clock-names + Usage: required + Value type: <string> + Definition: List of clock names required for CCI HW. + +- clock-rates + Usage: required + Value type: <u32> + Definition: List of clock rates in Hz for CCI HW. + +- clock-cntl-level + Usage: required + Value type: <string> + Definition: All different clock level node can support. + +- clocks + Usage: required + Value type: <phandle> + Definition: all clock phandle and source clocks. + +- src-clock-name + Usage: required + Value type: <string> + Definition: name for the source clock. + +- regulator-names + Usage: required + Value type: <string> + Definition: name of the voltage regulators required for the device. + +- gdscr-supply + Usage: required + Value type: <phandle> + Definition: should contain gdsr regulator used for cci clocks. + +- mmagic-supply + Usage: optional + Value type: <phandle> + Definition: should contain mmagic regulator used for mmagic clocks. + +========================= +CCI clock settings +========================= +- I2c speed settings (*) + Usage: required + Definition: List of i2c rates for CCI HW. + - i2c_freq_100Khz + Definition: qcom,i2c_standard_mode - node should contain clock settings for + 100Khz + - i2c_freq_400Khz + Definition: qcom,i2c_fast_mode - node should contain clock settings for + 400Khz + - i2c_freq_custom + Definition: qcom,i2c_custom_mode - node can contain clock settings for + frequencies other than 100Khz and 400Khz which is specific to usecase. + Currently it has settings for 375Khz. + - i2c_freq_1Mhz + Definition: qcom,i2c_fast_plus_mode - node should contain clock + settings for 1Mhz +* if speed settings is not defined the low level driver can use "i2c_freq_custom" +like default + + - hw-thigh + Definition: should contain high period of the SCL clock in terms of CCI clock cycle + - hw-tlow + Definition: should contain high period of the SCL clock in terms of CCI clock cycle + - hw-tsu-sto + Definition: should contain setup time for STOP condition + - hw-tsu-sta + Definition: should contain setup time for Repeated START condition + - hw-thd-dat + Definition: should contain hold time for the data + - hw-thd-sta + Definition: should contain hold time for START condition + - hw-tbuf + Definition: should contain free time between a STOP and a START condition + - hw-scl-stretch-en + Definition: should contain enable or disable clock stretching + - hw-trdhld + Definition: should contain internal hold time for SDA + - hw-tsp + Definition: should contain filtering of glitches + +Example: + + qcom,cci@0xfda0c000 { + cell-index = <0>; + compatible = "qcom,cci"; + reg = <0xfda0c000 0x300>; + reg-names = "cci"; + interrupts = <0 50 0>; + interrupt-names = "cci"; + clock-names = "camnoc_axi_clk", "soc_ahb_clk", + "slow_ahb_src_clk", "cpas_ahb_clk", + "cci_clk", "cci_clk_src"; + clock-rates = <0 0 80000000 0 0 37500000>; + clock-cntl-level = "turbo"; + gpios = <&tlmm 17 0>, + <&tlmm 18 0>, + <&tlmm 19 0>, + <&tlmm 20 0>; + gpio-tbl-num = <0 1 2 3>; + gpio-tbl-flags = <1 1 1 1>; + gpio-tbl-label = "CCI_I2C_DATA0", + "CCI_I2C_CLK0", + "CCI_I2C_DATA1", + "CCI_I2C_CLK1"; + i2c_freq_100Khz: qcom,i2c_standard_mode { + hw-thigh = <78>; + hw-tlow = <114>; + hw-tsu-sto = <28>; + hw-tsu-sta = <28>; + hw-thd-dat = <10>; + hw-thd-sta = <77>; + hw-tbuf = <118>; + hw-scl-stretch-en = <0>; + hw-trdhld = <6>; + hw-tsp = <1>; + status = "ok"; + }; + i2c_freq_400Khz: qcom,i2c_fast_mode { + hw-thigh = <20>; + hw-tlow = <28>; + hw-tsu-sto = <21>; + hw-tsu-sta = <21>; + hw-thd-dat = <13>; + hw-thd-sta = <18>; + hw-tbuf = <25>; + hw-scl-stretch-en = <0>; + hw-trdhld = <6>; + hw-tsp = <3>; + status = "ok"; + }; + i2c_freq_custom: qcom,i2c_custom_mode { + hw-thigh = <15>; + hw-tlow = <28>; + hw-tsu-sto = <21>; + hw-tsu-sta = <21>; + hw-thd-dat = <13>; + hw-thd-sta = <18>; + hw-tbuf = <25>; + hw-scl-stretch-en = <1>; + hw-trdhld = <6>; + hw-tsp = <3>; + status = "ok"; + }; + i2c_freq_1Mhz: qcom,i2c_fast_plus_mode { + hw-thigh = <16>; + hw-tlow = <22>; + hw-tsu-sto = <17>; + hw-tsu-sta = <18>; + hw-thd-dat = <16>; + hw-thd-sta = <15>; + hw-tbuf = <19>; + hw-scl-stretch-en = <1>; + hw-trdhld = <3>; + hw-tsp = <3>; + cci-clk-src = <37500000>; + status = "ok"; + }; + }; + +======================================= +Second Level Node - CAM SENSOR MODULES +======================================= + +======================================= +CAM SENSOR RESOURCE MANAGER +======================================= +Camera Sensor Resource manager node contains properties of shared camera +sensor resource. + +- compatible + Usage: required + Value type: <string> + Definition: Should be "qcom,cam-res-mgr". + +- shared-gpios + Usage: optional + Value type: <u32> + Definition: should contain the gpios which are used by two or more + cameras, and these cameras may be opened together. + +- pinctrl-names + Usage: optional + Value type: <string> + Definition: List of names to assign the shared pin state defined in pinctrl device node + +- pinctrl-<0..n> + Usage: optional + Value type: <phandle> + Definition: Lists phandles each pointing to the pin configuration node within a pin + controller. These pin configurations are installed in the pinctrl device node. + + +============================= +CAMERA IMAGE SENSOR MODULE +============================= +Image sensor node contains properties of camera image sensor + +- compatible + Usage: required + Value type: <string> + Definition: Should be "qcom,cam-sensor". + +- cell-index: cci hardware core index + Usage: required + Value type: <u32> + Definition: Should specify the Hardware index id. + +- reg + Usage: required + Value type: <u32> + Definition: offset and length of the register set + for the device for the cci operating in + compatible mode. + +- cci-device + Usage: required + Value type: <u32> + Definition: should contain i2c device id to be used for this camera + sensor + +- cci-master + Usage: required + Value type: <u32> + Definition: should contain i2c master id to be used for this camera + sensor + - 0 -> MASTER 0 + - 1 -> MASTER 1 + +- csiphy-sd-index + Usage: required + Value type: <u32> + Definition: should contain csiphy instance that will used to + receive sensor data (0, 1, 2, 3). + +- cam_vdig-supply + Usage: required + Value type: <phandle> + Definition: should contain regulator from which digital voltage is + supplied + +- cam_vana-supply + Usage: required + Value type: <phandle> + Definition: should contain regulator from which analog voltage is + supplied + +- cam_vio-supply + Usage: required + Value type: <phandle> + Definition: should contain regulator from which IO voltage is supplied + +- cam_bob-supply + Usage: optional + Value type: <phandle> + Definition: should contain regulator from which BoB voltage is supplied + +- regulator-names + Usage: required + Value type: <string> + Definition: should contain names of all regulators needed by this + sensor + +- rgltr-cntrl-support + Usage: required + Value type: <boolean> + Definition: This property is required if the sw control regulator parameters + e.g. rgltr-min-voltage + +- rgltr-min-voltage + Usage: required + Value type: <u32> + Definition: should contain minimum voltage level for regulators mentioned + in regulator-names property (in the same order) + +- rgltr-max-voltage + Usage: required + Value type: <u32> + Definition: should contain maximum voltage level for regulators mentioned + in regulator-names property (in the same order) + +- rgltr-load-current + Usage: required + Value type: <u32> + Definition: should contain optimum voltage level for regulators mentioned + in regulator-names property (in the same order) + +- sensor-position-roll + Usage: required + Value type: <u32> + Definition: should contain sensor rotational angle with respect to axis of + reference. i.e. 0, 90, 180, 360 + +- sensor-position-pitch + Usage: required + Value type: <u32> + Definition: should contain sensor rotational angle with respect to axis of + reference. i.e. 0, 90, 180, 360 + +- sensor-position-yaw + Usage: required + Value type: <u32> + Definition: should contain sensor rotational angle with respect to axis of + reference. i.e. 0, 90, 180, 360 + +- qcom,secure + Usage: optional + Value type: <u32> + Definition: should be enabled to operate the camera in secure mode + +- gpio-no-mux + Usage: optional + Value type: <u32> + Definition: should contain field to indicate whether gpio mux table is + available. i.e. 1 if gpio mux is not available, 0 otherwise + +- cam_vaf-supply + Usage: optional + Value type: <u32> + Definition: should contain regulator from which AF voltage is supplied + +- pwm-switch + Usage: optional + Value type: <boolean> + Definition: This property is required for regulator to switch into PWM mode. + +- gpios + Usage: required + Value type: <phandle> + Definition: should contain phandle to gpio controller node and array of + #gpio-cells specifying specific gpio (controller specific) + +- gpio-reset + Usage: required + Value type: <u32> + Definition: should contain index to gpio used by sensors reset_n + +- gpio-standby + Usage: optional + Value type: <u32> + Definition: should contain index to gpio used by sensors standby_n + +- gpio-vio + Usage: optional + Value type: <u32> + Definition: should contain index to gpio used by sensors io vreg enable + +- gpio-vana + Usage: optional + Value type: <u32> + Definition: should contain index to gpio used by sensors analog vreg enable + +- gpio-vdig + Usage: optional + Value type: <u32> + Definition: should contain index to gpio used by sensors digital vreg enable + +- gpio-vaf + Usage: optional + Value type: <u32> + Definition: should contain index to gpio used by sensors af vreg enable + +- gpio-af-pwdm + Usage: optional + Value type: <u32> + Definition: should contain index to gpio used by sensors af pwdm_n + +- gpio-req-tbl-num + Usage: optional + Value type: <u32> + Definition: should contain index to gpios specific to this sensor + +- gpio-req-tbl-flags + Usage: optional + Value type: <u32> + Definition: should contain direction of gpios present in + gpio-req-tbl-num property (in the same order) + +- gpio-req-tbl-label + Usage: optional + Value type: <u32> + Definition: should contain name of gpios present in + gpio-req-tbl-num property (in the same order) + +- gpio-set-tbl-num + Usage: optional + Value type: <u32> + Definition: should contain index of gpios that need to be + configured by msm + +- gpio-set-tbl-flags + Usage: optional + Value type: <u32> + Definition: should contain value to be configured for the gpios + present in gpio-set-tbl-num property (in the same order) + +- gpio-set-tbl-delay + Usage: optional + Value type: <u32> + Definition: should contain amount of delay after configuring + gpios as specified in gpio_set_tbl_flags property (in the same order) + +- actuator-src + Usage: optional + Value type: <phandle> + Definition: if auto focus is supported by this sensor, this + property should contain phandle of respective actuator node + +- led-flash-src + Usage: optional + Value type: <phandle> + Definition: if LED flash is supported by this sensor, this + property should contain phandle of respective LED flash node + +- qcom,vdd-cx-supply + Usage: optional + Value type: <phandle> + Definition: should contain regulator from which cx voltage is supplied + +- qcom,vdd-cx-name + Usage: optional + Value type: <string> + Definition: should contain names of cx regulator + +- eeprom-src + Usage: optional + Value type: <phandle> + Definition: if eeprom memory is supported by this sensor, this + property should contain phandle of respective eeprom nodes + +- ois-src + Usage: optional + Value type: <phandle> + Definition: if optical image stabilization is supported by this sensor, + this property should contain phandle of respective ois node + +- ir-led-src + Usage: optional + Value type: <phandle> + Definition: if ir led is supported by this sensor, this property + should contain phandle of respective ir-led node + +- qcom,ir-cut-src + Usage: optional + Value type: <phandle> + Definition: if ir cut is supported by this sensor, this property + should contain phandle of respective ir-cut node + +- qcom,special-support-sensors + Usage: required + Value type: <string> + Definition: if only some special sensors are supported + on this board, add sensor name in this property. + +- use-shared-clk + Usage: optional + Value type: <boolean> + Definition: It is booloean property. This property is required + if the clk is shared clk between different sensor and ois, if this + device need to be opened together. + +- clock-rates + Usage: required + Value type: <u32> + Definition: clock rate in Hz. + +- clock-cntl-level + Usage: required + Value type: <string> + Definition: All different clock level node can support. + +- clock-cntl-support + Usage: optional + Value type: <boolean> + Definition: Says whether clock control support is present or not + +- clocks + Usage: required + Value type: <phandle> + Definition: all clock phandle and source clocks. + +- clock-control + Usage: optional + Value type: <string> + Definition: The valid fields are "NO_SET_RATE", "INIT_RATE" and + "SET_RATE". "NO_SET_RATE" the corresponding clock is enabled without setting + the rate assuming some other driver has already set it to appropriate rate. + "INIT_RATE" clock rate is not queried assuming some other driver has set + the clock rate and ispif will set the the clock to this rate. + "SET_RATE" clock is enabled and the rate is set to the value specified + in the property clock-rates. + +============================= +ACTUATOR MODULE +============================= + +- compatible + Usage: required + Value type: <string> + Definition: Should be "qcom,actuator". + +- cell-index: cci hardware core index + Usage: required + Value type: <u32> + Definition: Should specify the Hardware index id. + +- reg + Usage: required + Value type: <u32> + Definition: offset and length of the register set + for the device for the cci operating in + compatible mode. + +- cci-device + Usage: required + Value type: <u32> + Definition: should contain i2c device id to be used for this camera + sensor + +- cci-master + Usage: required + Value type: <u32> + Definition: should contain i2c master id to be used for this camera + sensor + - 0 -> MASTER 0 + - 1 -> MASTER 1 + +- cam_vaf-supply + Usage: required + Value type: <phandle> + Definition: should contain regulator from which AF voltage is supplied + +- regulator-names + Usage: required + Value type: <string> + Definition: should contain names of all regulators needed by this + actuator. i.e. "cam_vaf" + +- rgltr-cntrl-support + Usage: optional + Value type: <boolean> + Definition: It is booloean property. This property is required + if the code and regulator control parameters e.g. rgltr-min-voltage + +- rgltr-min-voltage + Usage: optional + Value type: <u32> + Definition: should contain minimum voltage level in mcrovolts + for regulators mentioned in regulator-names property (in the same order) + +- rgltr-max-voltage + Usage: optional + Value type: <u32> + Definition: should contain maximum voltage level in mcrovolts + for regulators mentioned in regulator-names property (in the same order) + +- rgltr-load-current + Usage: optional + Value type: <u32> + Definition: should contain the maximum current in microamps + required from the regulators mentioned in the regulator-names property + (in the same order). + +============================= +OIS MODULE +============================= + +- compatible + Usage: required + Value type: <string> + Definition: Should be "qcom,ois". + +- cell-index: cci hardware core index + Usage: required + Value type: <u32> + Definition: Should specify the Hardware index id. + +- reg + Usage: required + Value type: <u32> + Definition: offset and length of the register set + for the device for the cci operating in + compatible mode. + +- cci-device + Usage: required + Value type: <u32> + Definition: should contain i2c device id to be used for this camera + sensor + +- cci-master + Usage: required + Value type: <u32> + Definition: should contain i2c master id to be used for this camera + sensor + - 0 -> MASTER 0 + - 1 -> MASTER 1 + +- cam_vaf-supply + Usage: required + Value type: <phandle> + Definition: should contain regulator from which AF voltage is supplied + +- regulator-names + Usage: required + Value type: <string> + Definition: should contain names of all regulators needed by this + actuator. i.e. "cam_vaf" + +- rgltr-cntrl-support + Usage: optional + Value type: <boolean> + Definition: It is booloean property. This property is required + if the code and regulator control parameters e.g. rgltr-min-voltage + +- rgltr-min-voltage + Usage: optional + Value type: <u32> + Definition: should contain minimum voltage level in mcrovolts + for regulators mentioned in regulator-names property (in the same order) + +- rgltr-max-voltage + Usage: optional + Value type: <u32> + Definition: should contain maximum voltage level in mcrovolts + for regulators mentioned in regulator-names property (in the same order) + +- rgltr-load-current + Usage: optional + Value type: <u32> + Definition: should contain the maximum current in microamps + required from the regulators mentioned in the regulator-names property + (in the same order). + +- use-shared-clk + Usage: optional + Value type: <boolean> + Definition: This property is required if the clk is shared clk between different + sensor and ois, if this device need to be opened together. + +Example: +&soc { + led_flash0: qcom,camera-flash@0 { + cell-index = <0>; + compatible = "qcom,camera-flash"; + flash-source = <&pmi8994_flash0 &pmi8994_flash1>; + torch-source = <&pmi8998_torch0 &pmi8998_torch1>; + switch-source = <&pmi8998_switch>; + status = "ok"; + }; +}; + +&cam_cci0 { + actuator0: qcom,actuator@0 { + cell-index = <0>; + reg = <0x0>; + compatible = "qcom,actuator"; + cci-device = <0>; + cci-master = <0>; + cam_vaf-supply = <&pmi8998_bob>; + regulator-names = "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <2800000>; + rgltr-max-voltage = <2800000>; + rgltr-load-current = <100000>; + }; + + ois0: qcom,ois@0 { + cell-index = <0>; + reg = <0x0>; + compatible = "qcom,ois"; + cci-device = <0>; + cci-master = <0>; + cam_vaf-supply = <&pmi8998_bob>; + regulator-names = "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <2800000>; + rgltr-max-voltage = <2800000>; + rgltr-load-current = <100000>; + }; + + qcom,cam-res-mgr { + compatible = "qcom,cam-res-mgr"; + status = "ok"; + shared-gpios = <18 19>; + pinctrl-names = "cam_res_mgr_default", "cam_res_mgr_suspend"; + pinctrl-0 = <&cam_shared_clk_active &cam_res_mgr_active>; + pinctrl-1 = <&cam_shared_clk_suspend &cam_res_mgr_suspend>; + }; + + qcom,cam-sensor@0 { + cell-index = <0>; + compatible = "qcom,camera"; + reg = <0x0>; + csiphy-sd-index = <0>; + sensor-position-roll = <90>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + secure = <1>; + led-flash-src = <&led_flash0>; + actuator-src = <&actuator0>; + ois-src = <&ois0>; + eeprom-src = <&eeprom0>; + cam_vdig-supply = <&pm8009_l2>; + cam_vio-supply = <&pm8009l_l1>; + cam_vana-supply = <&pm8009l_l5>; + cam_bob-supply = <&pm8150l_bob>; + cam_clk-supply = <&tital_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_bob"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <0 2800000 1200000 0 3008000>; + rgltr-max-voltage = <0 2800000 1200000 0 4000000>; + rgltr-load-current = <0 80000 1200000 0 2000000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active + &cam_sensor_rear_active>; + pinctrl-1 = <&cam_sensor_mclk0_suspend + &cam_sensor_rear_suspend>; + gpios = <&tlmm 13 0>, + <&tlmm 80 0>, + <&tlmm 79 0>; + gpio-reset = <1>; + gpio-standby = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <1 0 0>; + gpio-req-tbl-label = "CAMIF_MCLK0", + "CAM_RESET0", + "CAM_VANA"; + sensor-position = <0>; + sensor-mode = <0>; + cci-device = <0>; + cci-master = <0>; + status = "ok"; + use-shared-clk; + clocks = <&clock_mmss clk_mclk0_clk_src>, + <&clock_mmss clk_camss_mclk0_clk>; + clock-names = "cam_src_clk", "cam_clk"; + clock-cntl-leveli = "turbo"; + clock-rates = <24000000>; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-cdm.txt b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-cdm.txt new file mode 100644 index 000000000000..b376cad4a049 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-cdm.txt @@ -0,0 +1,155 @@ +* Qualcomm Technologies, Inc. MSM Camera CDM + +CDM (Camera Data Mover) is module intended to provide means for fast programming +camera registers and lookup tables. + +======================= +Required Node Structure +======================= +CDM Interface node takes care of the handling has HW nodes and provide interface +for camera clients. + +- compatible + Usage: required + Value type: <string> + Definition: Should be "qcom,cam-cdm-intf". + +- label + Usage: required + Value type: <string> + Definition: Should be "cam-cdm-intf". + +- num-hw-cdm + Usage: required + Value type: <u32> + Definition: Number of supported HW blocks. + +- cdm-client-names + Usage: required + Value type: <string> + Definition: List of Clients supported by CDM interface. + +Example: + qcom,cam-cdm-intf { + compatible = "qcom,cam-cdm-intf"; + label = "cam-cdm-intf"; + num-hw-cdm = <1>; + cdm-client-names = "vfe", + "jpeg-dma", + "jpeg", + "fd"; + }; + +======================= +Required Node Structure +======================= +CDM HW node provides interface for camera clients through +to CDM interface node. + +- cell-index + Usage: required + Value type: <u32> + Definition: Node instance number. + +- compatible + Usage: required + Value type: <string> + Definition: Should be "qcom,cam480-cpas-cdm0", "qcom,cam480-cpas-cdm1" + "qcom,cam170-cpas-cdm0" or "qcom,cam480-cpas-cdm2". + +- label + Usage: required + Value type: <string> + Definition: Should be "cpas-cdm". + +- reg-names + Usage: required + Value type: <string> + Definition: Name of the register resources. + +- reg + Usage: required + Value type: <u32> + Definition: Register values. + +- reg-cam-base + Usage: required + Value type: <u32> + Definition: Offset of the register space compared to + to Camera base register space. + +- interrupt-names + Usage: optional + Value type: <string> + Definition: Name of the interrupt. + +- interrupts + Usage: optional + Value type: <u32> + Definition: Interrupt associated with CDM HW. + +- regulator-names + Usage: required + Value type: <string> + Definition: Name of the regulator resources for CDM HW. + +- camss-supply + Usage: required + Value type: <phandle> + Definition: Regulator reference corresponding to the names listed + in "regulator-names". + +- clock-names + Usage: required + Value type: <string> + Definition: List of clock names required for CDM HW. + +- clocks + Usage: required + Value type: <phandle> + Definition: List of clocks used for CDM HW. + +- clock-rates + Usage: required + Value type: <u32> + Definition: List of clocks rates. + +- cdm-client-names + Usage: required + Value type: <string> + Definition: List of Clients supported by CDM HW node. + +- clock-cntl-level + Usage: required + Value type: <string> + Definition: List of strings corresponds clock-rates levels. + Supported strings: minsvs, lowsvs, svs, svs_l1, nominal, turbo. + +Example: + qcom,cpas-cdm0@ac48000 { + cell-index = <0>; + compatible = "qcom,cam480-cpas-cdm0"; + label = "cpas-cdm0"; + reg = <0xac48000 0x1000>; + reg-names = "cpas-cdm"; + interrupts = <0 461 0>; + interrupt-names = "cpas-cdm"; + regulator-names = "camss"; + camss-supply = <&titan_top_gdsc>; + clock-names = "soc_ahb_clk", + "titan_top_ahb_clk", + "cam_axi_clk", + "camcc_slow_ahb_clk_src", + "cpas_top_ahb_clk", + "camnoc_axi_clk"; + clocks = <&clock_camcc CAM_CC_SOC_AHB_CLK>, + <&clock_gcc GCC_CAMERA_AHB_CLK>, + <&clock_gcc GCC_CAMERA_AXI_CLK>, + <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&clock_camcc CAM_CC_CPAS_AHB_CLK>, + <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>; + qcom,clock-rates = <0 80000000 80000000 80000000 80000000 80000000>; + cdm-client-names = "ife"; + clock-cntl-level = "turbo"; + status = "ok"; + }; diff --git a/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-cpas.txt b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-cpas.txt new file mode 100644 index 000000000000..c18b74391c18 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-cpas.txt @@ -0,0 +1,406 @@ +* Qualcomm Technologies, Inc. MSM Camera CPAS + +The MSM camera CPAS device provides dependency definitions for +enabling Camera CPAS HW and provides the Client definitions +for all HW blocks that use CPAS driver for BW voting. These +definitions consist of various properties that define the list +of clients supported, AHB, AXI master-slave IDs used for BW +voting. + +======================= +Required Node Structure +======================= +The camera CPAS device must be described in five levels. The first level has +general description of cpas including compatibility, interrupts, power info +etc. +The second level deals with information related to CPAS clients and how +the BW should be calculated. For simplicity in BW vote consolidation, the +grouping of granular votes pertaining to CPAS clients is represented as nodes +at four CAMNOC levels. The nodes at a particular level have some common +properties such as traffic merge type which indicates whether the votes at a +node have to be summed up, sum divided by two or taken max of all. CAMNOC Level +zero node usually represents granular vote info for clients. CAMNOC Level one +represents nodes which are clubbed together by arbiter in CAMNOC diagram. CAMNOC +Level two represents consolidated read and write nodes for RT and NRT paths. +CAMNOC Level three provides axi port information and these have nodes where all +paths from clients eventually converge according to their properties. This +includes master-slave IDs, ab, ib values for mnoc, camnoc bus interface + +================================== +First Level Node - CAM CPAS device +================================== +- cell-index + Usage: required + Value type: <u32> + Definition: Node instance number. + +- compatible + Usage: required + Value type: <string> + Definition: Should be "qcom,cam-cpas". + +- label + Usage: required + Value type: <string> + Definition: Should be "cpas". + +- arch-compat + Usage: required + Value type: <string> + Definition: Should be "cpas_top" or "camss_top". + +- reg-names + Usage: required + Value type: <string> + Definition: Name of the register resources. + +- reg + Usage: required + Value type: <u32> + Definition: Register values. + +- reg-cam-base + Usage: required + Value type: <u32> + Definition: Offset of the register space compared to + to Camera base register space. + +- cam_hw_fuse + Usage: optional + Value type: <u32> + Definition: List of fuse based features and respective + fuse info. + +- interrupt-names + Usage: optional + Value type: <string> + Definition: Name of the interrupt. + +- interrupts + Usage: optional + Value type: <u32> + Definition: Interrupt associated with CAMNOC HW. + +- qcom,cpas-hw-ver + Usage: required + Value type: <u32> + Definition: CAM HW Version information. + +- camnoc-axi-min-ib-bw + Usage: optional + Value type: <u64> + Definition: Min camnoc axi bw for the given target. + +- regulator-names + Usage: required + Value type: <string> + Definition: Name of the regulator resources for CPAS HW. + +- camss-vdd-supply + Usage: required + Value type: <phandle> + Definition: Regulator reference corresponding to the names listed + in "regulator-names". + +- clock-names + Usage: required + Value type: <string> + Definition: List of clock names required for CPAS HW. + +- clocks + Usage: required + Value type: <phandle> + Definition: List of clocks used for CPAS HW. + +- src-clock-name + Usage: required + Value type: <string> + Definition: Source clock name. + +- clock-rates + Usage: required + Value type: <u32> + Definition: List of clocks rates. + +- clock-cntl-level + Usage: required + Value type: <string> + Definition: List of strings corresponds clock-rates levels. + Supported strings: minsvs, lowsvs, svs, svs_l1, nominal, turbo. + +- control-camnoc-axi-clk + Usage: optional + Value type: <empty> + Definition: Bool property specifying whether to control camnoc axi + clock from cpas driver. + +- camnoc-bus-width + Usage: required if control-camnoc-axi-clk is enabled + Value type: <u32> + Definition: camnoc bus width. + +- camnoc-axi-clk-bw-margin-perc + Usage: optional + Value type: <u32> + Definition: Percentage value to be added to camnoc bw while calculating + camnoc axi clock frequency. + +- qcom,msm-bus,name +- qcom,msm-bus,num-cases +- qcom,msm-bus,num-paths +- qcom,msm-bus,vectors-KBps + Please refer Documentation/devicetree/bindings/arm/msm/msm_bus.txt + for the properties above. + +- vdd-corners + Usage: required + Value type: <u32> + Definition: List of vdd corners to map for ahb level. + +- vdd-corner-ahb-mapping + Usage: required + Value type: <string> + Definition: List of ahb level strings corresponds to vdd-corners. + Supported strings: suspend, svs, nominal, turbo + +- client-id-based + Usage: required + Value type: <empty> + Definition: Bool property specifying whether CPAS clients are ID based. + +- client-names + Usage: required + Value type: <string> + Definition: List of Clients supported by CPAS. + +- client-bus-camnoc-based + Usage: optional + Value type: <empty> + Definition: Bool property specifying whether Clients are connected + through CAMNOC for AXI access. + +=================================================================== +Third Level Node - CAMNOC Level nodes +=================================================================== +- level-index + Usage: required + Value type: <u32> + Definition: Number representing level index for ndoes at current CAMNOC level + +- camnoc-max-needed + Usage: optional + Value type: <empty> + Definition: Bool property for all votes at current level to be taken maximum + for CAMNOC BW calculation. + +=================================================================== +Fourth Level Node - Generic CAMNOC node properties +=================================================================== +- cell-index + Usage: required + Value type: <u32> + Definition: Unique index of node to be used by CPAS driver. + +- node-name + Usage: required + Value type: <string> + Definition: Unique name representing this node. + +- path-data-type + Usage: required if a CAMNOC Level 0 Node + Value type: <u32> + Definition: Type of path data for a specific client. + Supported : CAM_CPAS_PATH_DATA_IFE_LINEAR, CAM_CPAS_PATH_DATA_ALL, etc. + Please refer dt-bindings/msm/msm-camera.h for all supported + definitions. + +- path-transaction-type + Usage: required if a CAMNOC Level 0 Node + Value type: <u32> + Definition: Type of path transaction for a specific client. + Supported : CAM_CPAS_TRANSACTION_READ, CAM_CPAS_TRANSACTION_WRITE + +- client-name + Usage: required if a CAMNOC Level 0 Node + Value type: <string> + Definition: Name of the client with above properties. + Supported : From "client-names" property in CPAS node + +- constituent-paths + Usage: optional, applicable only to CAMNOC Level 0 Nodes + Value type: <u32> + Definition: List of constituents of path data type of current node. + Supported : CAM_CPAS_PATH_DATA_IFE_VID, CAM_CPAS_PATH_DATA_IFE_DISP, etc. + Please refer dt-bindings/msm/msm-camera.h for all supported + definitions. + +- traffic-merge-type + Usage: required if NOT a CAMNOC Level 0 Node + Value type: <u32> + Definition: Type of traffic merge for that node. + Supported : CAM_CPAS_TRAFFIC_MERGE_SUM, CAM_CPAS_TRAFFIC_MERGE_SUM_INTERLEAVE. + +- parent-node + Usage: required for all except CAMNOC Level 3 Nodes + Value type: <phandle> + Definition: Parent node of this node. Parent node must be at least + one level above the current level. + +- bus-width-factor + Usage: optional + Value type: <u32> + Definition: For bus width factor consideration in CAMNOC BW calculation + +- qcom,axi-port-name + Usage: required at CAMNOC Level 3 + Value type: <string> + Definition: Name of the AXI Port. + +- ib-bw-voting-needed + Usage: optional + Value type: <empty> + Definition: Bool property indicating axi port requires instantaneous bandwidth + +=================================================================== +Fifth Level Node - CAM AXI Bus Properties +=================================================================== +- qcom,msm-bus,name +- qcom,msm-bus,num-cases +- qcom,msm-bus,num-paths +- qcom,msm-bus,vectors-KBps + Please refer Documentation/devicetree/bindings/arm/msm/msm_bus.txt + for the properties above. + +- qcom,msm-bus-vector-dyn-vote + Usage: optional + Value type: <empty> + Definition: Bool property specifying whether this bus client + is dynamic vote based. + +Example: + + qcom,cam-cpas@ac40000 { + cell-index = <0>; + compatible = "qcom,cam-cpas"; + label = "cpas"; + arch-compat = "cpas_top"; + status = "ok"; + reg-names = "cam_cpas_top", "cam_camnoc"; + reg = <0xac40000 0x1000>, + <0xac42000 0x5000>; + reg-cam-base = <0x40000 0x42000>; + cam_hw_fuse = <CAM_CPAS_QCFA_BINNING_ENABLE 0x00780210 29>, + <CAM_CPAS_SECURE_CAMERA_ENABLE 0x00780210 18>; + interrupt-names = "cpas_camnoc"; + interrupts = <0 459 0>; + qcom,cpas-hw-ver = <0x170100>; /* Titan v170 v1.0.0 */ + regulator-names = "camss-vdd"; + camss-vdd-supply = <&titan_top_gdsc>; + clock-names = "gcc_ahb_clk", + "gcc_axi_clk", + "soc_ahb_clk", + "cpas_ahb_clk", + "slow_ahb_clk_src", + "camnoc_axi_clk"; + clocks = <&clock_gcc GCC_CAMERA_AHB_CLK>, + <&clock_gcc GCC_CAMERA_AXI_CLK>, + <&clock_camcc CAM_CC_SOC_AHB_CLK>, + <&clock_camcc CAM_CC_CPAS_AHB_CLK>, + <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>; + src-clock-name = "slow_ahb_clk_src"; + clock-rates = <0 0 0 0 80000000 0>; + clock-cntl-level = "turbo"; + control-camnoc-axi-clk; + camnoc-bus-width = <32>; + camnoc-axi-clk-bw-margin-perc = <10>; + qcom,msm-bus,name = "cam_ahb"; + qcom,msm-bus,num-cases = <4>; + qcom,msm-bus,num-paths = <1>; + qcom,msm-bus,vectors-KBps = + <MSM_BUS_MASTER_AMPSS_M0 + MSM_BUS_SLAVE_CAMERA_CFG 0 0>, + <MSM_BUS_MASTER_AMPSS_M0 + MSM_BUS_SLAVE_CAMERA_CFG 0 300000>, + <MSM_BUS_MASTER_AMPSS_M0 + MSM_BUS_SLAVE_CAMERA_CFG 0 640000>, + <MSM_BUS_MASTER_AMPSS_M0 + MSM_BUS_SLAVE_CAMERA_CFG 0 640000>; + client-id-based; + client-names = + "csiphy0", "csiphy1", "csiphy2", "csiphy3", + "csiphy4", "csiphy5", "cci0", "cci1", + "csid0", "csid1", "csid2", "csid3", + "csid4", "csid5", "csid6", + "ife0", "ife1", "ife2", "ife3", "custom0", + "ipe0", "cam-cdm-intf0", "cpas-cdm0", "cpas-cdm1", + "cpas-cdm2", + "bps0", "icp0", "jpeg-dma0", "jpeg-enc0", + "fd0"; + + camera-bus-nodes { + level3-nodes { + level-index = <3>; + level3_rt0_rd_wr_sum: level3-rt0-rd-wr-sum { + cell-index = <0>; + node-name = "level3-rt0-rd-wr-sum"; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM>; + qcom,axi-port-name = "cam_hf_0"; + ib-bw-voting-needed; + qcom,axi-port-mnoc { + qcom,msm-bus,name = + "cam_hf_0_mnoc"; + qcom,msm-bus-vector-dyn-vote; + qcom,msm-bus,num-cases = <2>; + qcom,msm-bus,num-paths = <1>; + qcom,msm-bus,vectors-KBps = + <MSM_BUS_MASTER_CAMNOC_HF + MSM_BUS_SLAVE_EBI_CH0 0 0>, + <MSM_BUS_MASTER_CAMNOC_HF + MSM_BUS_SLAVE_EBI_CH0 0 0>; + }; + }; + }; + level2-nodes { + level-index = <2>; + camnoc-max-needed; + level2_rt0_wr: level2-rt0-wr { + cell-index = <3>; + node-name = "level2-rt0-wr"; + parent-node = <&level3_rt0_rd_wr_sum>; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM_INTERLEAVE>; + }; + }; + level1-nodes { + level-index = <1>; + camnoc-max-needed; + level1_rt0_wr0: level1-rt0-wr0 { + cell-index = <8>; + node-name = "level1-rt0-wr0"; + parent-node = <&level2_rt0_wr>; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM>; + }; + }; + level0-nodes { + level-index = <0>; + ife0_ubwc_stats_wr: ife0-ubwc-stats-wr { + cell-index = <16>; + node-name = "ife0-ubwc-stats-wr"; + client-name = "ife0"; + traffic-data = + <CAM_CPAS_PATH_DATA_IFE_UBWC_STATS>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_WRITE>; + constituent-paths = + <CAM_CPAS_PATH_DATA_IFE_VID + CAM_CPAS_PATH_DATA_IFE_DISP + CAM_CPAS_PATH_DATA_IFE_STATS>; + parent-node = <&level1_rt0_wr0>; + }; + }; + }; + }; + diff --git a/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-csiphy.txt b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-csiphy.txt new file mode 100644 index 000000000000..f67f4ef7986a --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-csiphy.txt @@ -0,0 +1,117 @@ +* Qualcomm Technologies, Inc. MSM CSI Phy + +======================= +Required Node Structure +======================= +The camera CSIPHY node must be described in First level of device nodes. The +first level describe the overall CSIPHY node structure. + +====================================== +First Level Node - CSIPHY device +====================================== + +- compatible + Usage: required + Value type: <string> + Definition: Should be "qcom,csiphy-v1.0", + "qcom,csiphy-v1.1", "qcom,csiphy-v1.2", "qcom,csiphy-v1.2.1", + "qcom,csiphy-v1.2.2", "qcom,csiphy-v2.0", "qcom,csiphy". + +- cell-index: csiphy hardware core index + Usage: required + Value type: <u32> + Definition: Should specify the Hardware index id. + +- reg + Usage: required + Value type: <u32> + Definition: offset and length of the register set + for the device for the csiphy operating in + compatible mode. + +- reg-names + Usage: required + Value type: <string> + Definition: Should specify relevant names to each + reg property defined. + +- reg-cam-base + Usage: required + Value type: <string> + Definition: offset of CSIPHY in camera hw block + +- interrupts + Usage: required + Value type: <u32> + Definition: Interrupt associated with CCI HW. + +- interrupt-names + Usage: required + Value type: <string> + Definition: Name of the interrupt. + +- clock-names + Usage: required + Value type: <string> + Definition: List of clock names required for CSIPHY HW. + +- clock-rates + Usage: required + Value type: <u32> + Definition: List of clock rates in Hz for CSIPHY HW. + +- clock-cntl-level + Usage: required + Value type: <string> + Definition: All different clock level node can support. + +- clocks + Usage: required + Value type: <phandle> + Definition: all clock phandle and source clocks. + +- regulator-names + Usage: required + Value type: <string> + Definition: name of the voltage regulators required for the device. + +- gdscr-supply + Usage: required + Value type: <phandle> + Definition: should contain gdsr regulator used for CSIPHY clocks. + +- mipi-csi-vdd-supply + Usage: required + Value type: <phandle> + Definition: should contain phandle for mipi-csi-vdd regulator used for + CSIPHY device. + +- csi-vdd-voltage + Usage: required + Value type: <u32> + Definition: should contain required voltage for csi-vdd supply for CSIPHY. + +Example: + +qcom,csiphy@ac65000 { + cell-index = <0>; + compatible = "qcom,csiphy-v1.0", "qcom,csiphy"; + reg = <0xac65000 0x200>; + reg-cam-base = <0x65000>; + reg-names = "csiphy"; + interrupts = <0 477 0>; + interrupt-names = "csiphy"; + regulator-names = "gdscr", "refgen"; + mipi-csi-vdd-supply = <&pm8998_l1>; + csi-vdd-voltage = <1200000>; + gdscr-supply = <&titan_top_gdsc>; + clocks = <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY0_CLK>, + <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>; + clock-names = "cphy_rx_clk_src", "csiphy0_clk", + "csi0phytimer_clk_src", "csi0phytimer_clk"; + clock-rates = <400000000 0 300000000 0>; + clock-cntl-level = "turbo"; + status = "ok"; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-custom-hw.txt b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-custom-hw.txt new file mode 100644 index 000000000000..61125d0c8087 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-custom-hw.txt @@ -0,0 +1,28 @@ +* Qualcomm Technologies, Inc. MSM Camera Custom HW + +Camera Custom device provides the definitions for enabling +the custom hardware. It also provides the functions for the client +to control the Custom hardware. + +======================= +Required Node Structure +======================= +The Custom device is described in one level of the device node. + +====================================== +First Level Node - CAM Custom device +====================================== +Required properties: +- compatible + Usage: required + Value type: <string> + Definition: Should specify the compatibility string for matching the + driver. e.g. "qcom,cam_custom_hw_sub_mod". + +Example: + + qcom,cam-custom-hw { + compatible = "qcom,cam_custom_hw_sub_mod"; + arch-compat = "custom"; + status = "ok"; + }; diff --git a/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-custom.txt b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-custom.txt new file mode 100644 index 000000000000..8c5cc6148c5b --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-custom.txt @@ -0,0 +1,31 @@ +* Qualcomm Technologies, Inc. MSM Camera Custom + +The MSM camera Custom driver provides the definitions for enabling +the Camera custom hadware. It provides the functions for the Client to +control the custom hardware. + +======================= +Required Node Structure +======================= +The camera Custom device is described in one level of device node. + +================================== +First Level Node - CAM CUSTOM device +================================== +- compatible + Usage: required + Value type: <string> + Definition: Should be "qcom,cam-custom". + +- arch-compat + Usage: required + Value type: <string> + Definition: Should be "custom". + +Example: + + qcom,cam-custom { + compatible = "qcom,cam-custom"; + arch-compat = "custom"; + status = "ok"; + }; diff --git a/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-eeprom.txt b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-eeprom.txt new file mode 100644 index 000000000000..d77f337a9e3c --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-eeprom.txt @@ -0,0 +1,503 @@ +* Qualcomm Technologies, Inc. MSM EEPROM + +EEPROM is a one time programmed(OTP) device that stores the calibration data +use for camera sensor. It may either be integrated in the sensor module or in +the sensor itself. As a result, the power, clock and GPIOs may be the same as +the camera sensor. The following describes the page block map, power supply, +clock, GPIO and power on sequence properties of the EEPROM device. + +======================================================= +Required Node Structure if probe happens from userspace +======================================================= +The EEPROM device is described in one level of the device node. + +====================================== +First Level Node - CAM EEPROM device +====================================== +- compatible + Usage: required + Value type: <string> + Definition: Should be "qcom,eeprom". + +- cell-index + Usage: required + Value type: <u32> + Definition: Should specify the hardware index id. + +- reg + Usage: required + Value type: <u32> + Definition: Register values. + +- regulator-names + Usage: required + Value type: <string> + Definition: Name of the regulator resources for EEPROM HW. + +- xxxx-supply + Usage: required + Value type: <phandle> + Definition: Regulator reference corresponding to the names listed in + "regulator-names". + +- rgltr-cntrl-support + Usage: required + Value type: <bool> + Definition: This property specifies if the regulator control is supported + e.g. rgltr-min-voltage. + +- rgltr-min-voltage + Usage: required + Value type: <u32> + Definition: should contain minimum voltage level for regulators + mentioned in regulator-names property. + +- rgltr-max-voltage + Usage: required + Value type: <u32> + Definition: should contain maximum voltage level for regulators + mentioned in regulator-names property. + +- rgltr-load-current + Usage: required + Value type: <u32> + Definition: should contain the maximum current in microamps required for + the regulators mentioned in regulator-names property. + +- gpio-no-mux + Usage: required + Value type: <u32> + Definition: should specify the gpio mux type. + +- gpios + Usage: required + Value type: <phandle> + Definition: should specify the gpios to be used for the eeprom. + +- gpio-reset + Usage: required + Value type: <u32> + Definition: should specify the reset gpio index. + +- gpio-standby + Usage: required + Value type: <u32> + Definition: should specify the standby gpio index. + +- gpio-req-tbl-num + Usage: required + Value type: <u32> + Definition: should specify the gpio table index. + +- gpio-req-tbl-flags + Usage: required + Value type: <u32> + Definition: should specify the gpio functions. + +- gpio-req-tbl-label + Usage: required + Value type: <string> + Definition: should specify the gpio labels. + +- sensor-position + Usage: required + Value type: <u32> + Definition: should contain the mount angle of the camera sensor. + +- cci-device + Usage: required + Value type: <u32> + Definition: should contain i2c device id to be used for this camera + sensor + +- cci-master + Usage: required + Value type: <u32> + Definition: should contain i2c master id to be used for this camera + sensor. + +- sensor-mode + Usage: required + Value type: <u32> + Definition: should contain sensor mode supported. + +- clock-names + Usage: required + Value type: <string> + Definition: List of clock names required for EEPROM HW. + +- clocks + Usage: required + Value type: <phandle> + Definition: List of clocks used for EEPROM HW. + +- clock-cntl-level + Usage: required + Value type: <string> + Definition: says what all different clock levels eeprom node has. + +- clock-rates + Usage: required + Value type: <u32> + Definition: List of clocks rates. + +Example: + + eeprom0: qcom,eeprom@0 { + cell-index = <0>; + reg = <0x0>; + compatible = "qcom,eeprom"; + cam_vdig-supply = <&pm8998_l5>; + cam_vio-supply = <&pm8998_lvs1>; + regulator-names = "cam_vdig", "cam_vio"; + rgltr-cntrl-support; + rgltr-min-voltage = <1200000 0>; + rgltr-max-voltage = <1200000 0>; + rgltr-load-current = <0 80000 105000 0>; + gpio-no-mux = <0>; + gpios = <&msmgpio 26 0>, + <&msmgpio 37 0>, + <&msmgpio 36 0>; + gpio-reset = <1>; + gpio-standby = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <1 0 0>; + gpio-req-tbl-label = "CAMIF_MCLK", + "CAM_RESET1", + "CAM_STANDBY"; + sensor-position = <0>; + sensor-mode = <0>; + cci-device = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + +======================================================= +Required Node Structure if probe happens from kernel +======================================================= +The EEPROM device is described in one level of the device node. + +====================================== +First Level Node - CAM EEPROM device +====================================== +- compatible + Usage: required + Value type: <string> + Definition: Should be "qcom,eeprom". + +- cell-index + Usage: required + Value type: <u32> + Definition: Should specify the hardware index id. + +- reg + Usage: required + Value type: <u32> + Definition: Register values. + +- qcom,eeprom-name + Usage: required + Value type: <string> + Definition: Name of the EEPROM HW. + +- qcom,slave-addr + Usage: required + Value type: <u32> + Definition: Slave address of the EEPROM HW. + +- qcom,num-blocks + Usage: required + Value type: <u32> + Definition: Total block number that eeprom contains. + +- qcom,pageX + Usage: required + Value type: <u32> + Definition: List of values specifying page size, start address, + address type, data, data type, delay in ms. + size 0 stand for non-paged. + +- qcom,pollX + Usage: required + Value type: <u32> + Definition: List of values specifying poll size, poll reg address, + address type, data, data type, delay in ms. + size 0 stand for not used. + +- qcom,memX + Usage: required + Value type: <u32> + Definition: List of values specifying memory size, start address, + address type, data, data type, delay in ms. + size 0 stand for not used. + +- qcom,saddrX + Usage: required + Value type: <u32> + Definition: property should specify the slave address for block (%d). + +- regulator-names + Usage: required + Value type: <string> + Definition: Name of the regulator resources for EEPROM HW. + +- qcom,cmm-data-support + Usage: required + Value type: <u32> + Definition: Camera MultiModule data capability flag.. + +- qcom,cmm-data-compressed + Usage: required + Value type: <u32> + Definition: Camera MultiModule data compression flag. + +- qcom,cmm-data-offset + Usage: required + Value type: <u32> + Definition: Camera MultiModule data start offset. + +- qcom,cmm-data-size + Usage: required + Value type: <u32> + Definition: Camera MultiModule data size. + +- qcom,cam-power-seq-type + Usage: required + Value type: <string> + Definition: should specify the power on sequence types. + +- qcom,cam-power-seq-val + Usage: required + Value type: <string> + Definition: should specify the power on sequence values. + +- qcom,cam-power-seq-cfg-val + Usage: required + Value type: <u32> + Definition: should specify the power on sequence config values. + +- qcom,cam-power-seq-delay + Usage: required + Value type: <u32> + Definition: should specify the power on sequence delay time in ms. + +- spiop-read + Usage: required + Value type: <u32> + Definition: this array provides SPI read operation related data. + +- spiop-readseq + Usage: required + Value type: <u32> + Definition: this array provides SPI read sequence operation realted data. + +- spiop-queryid + Usage: required + Value type: <u32> + Definition: this array provides SPI query eeprom id operation related data. + +- spiop-pprog: + Usage: required + Value type: <u32> + Definition: this array provides SPI page program operation related data. + +- spiop-wenable + Usage: required + Value type: <u32> + Definition: this array provides SPI write enable operation related data. + +- spiop-readst + Usage: required + Value type: <u32> + Definition: this array provides SPI read destination operation related data. + +- spiop-erase + Usage: required + Value type: <u32> + Definition: this array provides SPI erase operation related data. + +- eeprom-idx + Usage: required + Value type: <u32> + Definition: this array provides eeprom id realted data. + +- xxxx-supply + Usage: required + Value type: <phandle> + Definition: Regulator reference corresponding to the names listed in + "regulator-names". + +- rgltr-cntrl-support + Usage: required + Value type: <bool> + Definition: This property specifies if the regulator control is supported + e.g. rgltr-min-voltage. + +- rgltr-min-voltage + Usage: required + Value type: <u32> + Definition: should contain minimum voltage level for regulators + mentioned in regulator-names property. + +- rgltr-max-voltage + Usage: required + Value type: <u32> + Definition: should contain maximum voltage level for regulators + mentioned in regulator-names property. + +- rgltr-load-current + Usage: required + Value type: <u32> + Definition: should contain the maximum current in microamps required for + the regulators mentioned in regulator-names property. + +- gpio-no-mux + Usage: required + Value type: <u32> + Definition: should specify the gpio mux type. + +- gpios + Usage: required + Value type: <phandle> + Definition: should specify the gpios to be used for the eeprom. + +- gpio-reset + Usage: required + Value type: <u32> + Definition: should specify the reset gpio index. + +- gpio-standby + Usage: required + Value type: <u32> + Definition: should specify the standby gpio index. + +- gpio-req-tbl-num + Usage: required + Value type: <u32> + Definition: should specify the gpio table index. + +- gpio-req-tbl-flags + Usage: required + Value type: <u32> + Definition: should specify the gpio functions. + +- gpio-req-tbl-label + Usage: required + Value type: <string> + Definition: should specify the gpio labels. + +- sensor-position + Usage: required + Value type: <u32> + Definition: should contain the mount angle of the camera sensor. + +- cci-device + Usage: required + Value type: <u32> + Definition: should contain i2c device id to be used for this camera + sensor + +- cci-master + Usage: required + Value type: <u32> + Definition: should contain i2c master id to be used for this camera + sensor. + +- sensor-mode + Usage: required + Value type: <u32> + Definition: should contain sensor mode supported. + +- clock-cntl-level + Usage: required + Value type: <string> + Definition: says what all different clock levels eeprom node has. + +- clock-names + Usage: required + Value type: <string> + Definition: List of clock names required for EEPROM HW. + +- clocks + Usage: required + Value type: <phandle> + Definition: List of clocks used for EEPROM HW. + +- clock-rates + Usage: required + Value type: <u32> + Definition: List of clocks rates. + +Example: + + eeprom0: qcom,eeprom@0 { + cell-index = <0>; + reg = <0x0>; + qcom,eeprom-name = "msm_eeprom"; + eeprom-id0 = <0xF8 0x15>; + eeprom-id1 = <0xEF 0x15>; + eeprom-id2 = <0xC2 0x36>; + eeprom-id3 = <0xC8 0x15>; + compatible = "qcom,eeprom"; + qcom,slave-addr = <0x60>; + qcom,num-blocks = <2>; + qcom,page0 = <1 0x100 2 0x01 1 1>; + qcom,poll0 = <0 0x0 2 0 1 1>; + qcom,mem0 = <0 0x0 2 0 1 0>; + qcom,page1 = <1 0x0200 2 0x8 1 1>; + qcom,pageen1 = <1 0x0202 2 0x01 1 10>; + qcom,poll1 = <0 0x0 2 0 1 1>; + qcom,mem1 = <32 0x3000 2 0 1 0>; + qcom,saddr1 = <0x62>; + qcom,cmm-data-support; + qcom,cmm-data-compressed; + qcom,cmm-data-offset = <0>; + qcom,cmm-data-size = <0>; + spiop-read = <0x03 3 0 0 0>; + spiop-readseq = <0x03 3 0 0 0>; + spiop-queryid = <0x90 3 0 0 0>; + spiop-pprog = <0x02 3 0 3 100>; + spiop-wenable = <0x06 0 0 0 0>; + spiop-readst = <0x05 0 0 0 0>; + spiop-erase = <0x20 3 0 10 100>; + qcom,cam-power-seq-type = "sensor_vreg", + "sensor_vreg", "sensor_clk", + "sensor_gpio", "sensor_gpio"; + qcom,cam-power-seq-val = "cam_vdig", + "cam_vio", "sensor_cam_mclk", + "sensor_gpio_reset", + "sensor_gpio_standby"; + qcom,cam-power-seq-cfg-val = <1 1 24000000 1 1>; + qcom,cam-power-seq-delay = <1 1 5 5 10>; + cam_vdig-supply = <&pm8998_l5>; + cam_vio-supply = <&pm8998_lvs1>; + regulator-names = "cam_vdig", "cam_vio"; + rgltr-cntrl-support; + rgltr-min-voltage = <1200000 0>; + rgltr-max-voltage = <1200000 0>; + rgltr-load-current = <0 80000 105000 0>; + qcom,gpio-no-mux = <0>; + gpios = <&msmgpio 26 0>, + <&msmgpio 37 0>, + <&msmgpio 36 0>; + gpio-reset = <1>; + gpio-standby = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <1 0 0>; + gpio-req-tbl-label = "CAMIF_MCLK", + "CAM_RESET1", + "CAM_STANDBY"; + sensor-position = <0>; + sensor-mode = <0>; + cci-device = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; + clock-cntl-level = "turbo"; + clock-names = "cam_clk"; + clock-rates = <24000000>; + }; diff --git a/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-fd.txt b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-fd.txt new file mode 100644 index 000000000000..51b0babaa709 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-fd.txt @@ -0,0 +1,154 @@ +* Qualcomm Technologies, Inc. MSM Camera FD + +The MSM camera Face Detection device provides dependency definitions +for enabling Camera FD HW. MSM camera FD is implemented in multiple +device nodes. The root FD device node has properties defined to hint +the driver about the FD HW nodes available during the probe sequence. +Each node has multiple properties defined for interrupts, clocks and +regulators. + +======================= +Required Node Structure +======================= +FD root interface node takes care of the handling Face Detection high level +driver handling and controls underlying FD hardware present. + +- compatible + Usage: required + Value type: <string> + Definition: Should be "qcom,cam-fd". + +- compat-hw-name + Usage: required + Value type: <string> + Definition: Should be "qcom,fd". + +- num-fd + Usage: required + Value type: <u32> + Definition: Number of supported FD HW blocks. + +Example: + qcom,cam-fd { + compatible = "qcom,cam-fd"; + compat-hw-name = "qcom,fd"; + num-fd = <1>; + }; + +======================= +Required Node Structure +======================= +FD Node provides interface for Face Detection hardware driver +about the device register map, interrupt map, clocks, regulators. + +- cell-index + Usage: required + Value type: <u32> + Definition: Node instance number. + +- compatible + Usage: required + Value type: <string> + Definition: Should be one of "qcom,fd41", "qcom,fd501", + "qcom,fd600". + +- reg-names + Usage: optional + Value type: <string> + Definition: Name of the register resources. + +- reg + Usage: optional + Value type: <u32> + Definition: Register values. + +- reg-cam-base + Usage: optional + Value type: <u32> + Definition: Offset of the register space compared to + to Camera base register space. + +- interrupt-names + Usage: optional + Value type: <string> + Definition: Name of the interrupt. + +- interrupts + Usage: optional + Value type: <u32> + Definition: Interrupt line associated with FD HW. + +- regulator-names + Usage: required + Value type: <string> + Definition: Name of the regulator resources for FD HW. + +- camss-vdd-supply + Usage: required + Value type: <phandle> + Definition: Regulator reference corresponding to the names listed + in "regulator-names". + +- clock-names + Usage: required + Value type: <string> + Definition: List of clock names required for FD HW. + +- clocks + Usage: required + Value type: <phandle> + Definition: List of clocks required for FD HW. + +- clock-rates + Usage: required + Value type: <u32> + Definition: List of clocks rates. + +- src-clock-name + Usage: required + Value type: <string> + Definition: Source clock name. + +- clock-control-debugfs + Usage: optional + Value type: <string> + Definition: Enable/Disable clk rate control. + +- clock-cntl-level + Usage: required + Value type: <string> + Definition: List of strings corresponds clock-rates levels. + Supported strings: minsvs, lowsvs, svs, svs_l1, nominal, turbo. + +Examples: + cam_fd: qcom,fd@ac5a000 { + cell-index = <0>; + compatible = "qcom,fd600"; + reg-names = "fd_core", "fd_wrapper"; + reg = <0xac5a000 0x1000>, + <0xac5b000 0x400>; + reg-cam-base = <0x5a000 0x5b000>; + interrupt-names = "fd"; + interrupts = <0 462 0>; + regulator-names = "camss-vdd"; + camss-vdd-supply = <&titan_top_gdsc>; + clock-names = "gcc_ahb_clk", + "gcc_axi_clk", + "soc_ahb_clk", + "cpas_ahb_clk", + "camnoc_axi_clk", + "fd_core_clk_src", + "fd_core_clk", + "fd_core_uar_clk"; + clocks = <&clock_gcc GCC_CAMERA_AHB_CLK>, + <&clock_gcc GCC_CAMERA_AXI_CLK>, + <&clock_camcc CAM_CC_SOC_AHB_CLK>, + <&clock_camcc CAM_CC_CPAS_AHB_CLK>, + <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, + <&clock_camcc CAM_CC_FD_CORE_CLK_SRC>, + <&clock_camcc CAM_CC_FD_CORE_CLK>, + <&clock_camcc CAM_CC_FD_CORE_UAR_CLK>; + src-clock-name = "fd_core_clk_src"; + clock-cntl-level = "svs"; + clock-rates = <0 0 0 0 0 400000000 0 0>; + }; diff --git a/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-icp.txt b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-icp.txt new file mode 100644 index 000000000000..e22e1f99f670 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-icp.txt @@ -0,0 +1,287 @@ +* Qualcomm Technologies, Inc. MSM Camera ICP + +The MSM camera ICP devices are implemented multiple device nodes. +The root icp device node has properties defined to hint the driver +about the number of A5,IPE and BPS nodes available during the +probe sequence. Each node has multiple properties defined +for interrupts, clocks and regulators. + +======================= +Required Node Structure +======================= +ICP root interface node takes care of the handling account for number +of A5, IPE and BPS devices present on the hardware. + +- compatible + Usage: required + Value type: <string> + Definition: Should be "qcom,cam-icp". + +- compat-hw-name + Usage: required + Value type: <string> + Definition: Should be "qcom,a5" or "qcom,ipe0" or "qcom,ipe1" or "qcom,bps". + +- num-a5 + Usage: required + Value type: <u32> + Definition: Number of supported A5 processors. + +- num-ipe + Usage: required + Value type: <u32> + Definition: Number of supported IPE HW blocks. + +- num-bps + Usage: required + Value type: <u32> + Definition: Number of supported BPS HW blocks. + +Example: + qcom,cam-icp { + compatible = "qcom,cam-icp"; + compat-hw-name = "qcom,a5", "qcom,ipe0", "qcom,ipe1", "qcom,bps"; + num-a5 = <1>; + num-ipe = <2>; + num-bps = <1>; + status = "ok"; + }; + +======================= +Required Node Structure +======================= +A5/IPE/BPS Node's provides interface for Image Control Processor driver +about the A5 register map, interrupt map, clocks, regulators +and name of firmware image. + +- cell-index + Usage: required + Value type: <u32> + Definition: Node instance number. + +- compatible + Usage: required + Value type: <string> + Definition: Should be "qcom,cam-a5" or "qcom,cam-ipe" or "qcom,cam-bps". + +- reg-names + Usage: optional + Value type: <string> + Definition: Name of the register resources. + +- reg + Usage: optional + Value type: <u32> + Definition: Register values. + +- reg-cam-base + Usage: optional + Value type: <u32> + Definition: Register values. + +- interrupt-names + Usage: optional + Value type: <string> + Definition: Name of the interrupt. + +- interrupts + Usage: optional + Value type: <u32> + Definition: Interrupt associated with CDM HW. + +- regulator-names + Usage: required + Value type: <string> + Definition: Name of the regulator resources for CDM HW. + +- camss-supply + Usage: required + Value type: <phandle> + Definition: Regulator reference corresponding to the names listed + in "regulator-names". + +- clock-names + Usage: required + Value type: <string> + Definition: List of clock names required for CDM HW. + +- src-clock-name + Usage: required + Value type: <string> + Definition: Source clock name. + +- clock-control-debugfs + Usage: optional + Value type: <string> + Definition: Enable/Disable clk rate control. + +- clocks + Usage: required + Value type: <phandle> + Definition: List of clocks used for CDM HW. + +- clock-cntl-level + Usage: required + Value type: <string> + Definition: List of strings corresponds clock-rates levels. + Supported strings: lowsvs, svs, svs_l1, nominal, turbo. + +- clock-rates + Usage: required + Value type: <u32> + Definition: List of clocks rates. + +- fw_name + Usage: optional + Value type: <string> + Definition: Name of firmware image. + +- ubwc-ipe-fetch-cfg + Usage: required + Value type: <u32> + Definition: UBWC IPE fetch configuration based on DDR device type. + +- ubwc-ipe-write-cfg + Usage: required + Value type: <u32> + Definition: UBWC IPE write configuration based on DDR device type. + +- ubwc-bps-fetch-cfg + Usage: required + Value type: <u32> + Definition: UBWC BPS fetch configuration based on DDR device type. + +- ubwc-bps-write-cfg + Usage: required + Value type: <u32> + Definition: UBWC BPS write configuration based on DDR device type. + +- ubwc-cfg + Usage: optional + Value type: <u32> + Definition: UBWC configuration, this is mandatory if above + ipe/bps ubwc properties are not used. + +Examples: +a5: qcom,a5@ac00000 { + cell-index = <0>; + compatible = "qcom,cam-a5"; + reg = <0xac00000 0x6000>, + <0xac10000 0x8000>, + <0xac18000 0x3000>; + reg-names = "a5_qgic", "a5_sierra", "a5_csr"; + interrupts = <0 463 0>; + interrupt-names = "a5"; + regulator-names = "camss-vdd"; + camss-vdd-supply = <&titan_top_gdsc>; + clock-names = "gcc_cam_ahb_clk", + "gcc_cam_axi_clk", + "soc_ahb_clk", + "cpas_ahb_clk", + "camnoc_axi_clk", + "icp_apb_clk", + "icp_atb_clk", + "icp_clk", + "icp_clk_src", + "icp_cti_clk", + "icp_ts_clk"; + clocks = <&clock_gcc GCC_CAMERA_AHB_CLK>, + <&clock_gcc GCC_CAMERA_AXI_CLK>, + <&clock_camcc CAM_CC_SOC_AHB_CLK>, + <&clock_camcc CAM_CC_CPAS_AHB_CLK>, + <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, + <&clock_camcc CAM_CC_ICP_APB_CLK>, + <&clock_camcc CAM_CC_ICP_ATB_CLK>, + <&clock_camcc CAM_CC_ICP_CLK>, + <&clock_camcc CAM_CC_ICP_CLK_SRC>, + <&clock_camcc CAM_CC_ICP_CTI_CLK>, + <&clock_camcc CAM_CC_ICP_TS_CLK>; + + clock-rates = <0 0 0 80000000 0 0 0 0 600000000 0 0>; + clock-cntl-level = "turbo"; + fw_name = "CAMERA_ICP.elf"; + /* "ubwc-cfg" is not used, even if defined the new property + tags will be priortized. If the new properties are not used + please specify "ubwc-cfg" in that case */ + ubwc-ipe-fetch-cfg = <0x707b 0x7083>; + ubwc-ipe-write-cfg = <0x161ef 0x1620f>; + ubwc-bps-fetch-cfg = <0x707b 0x7083> + ubwc-bps-write-cfg = <0x161ef 0x1620f>; + +qcom,ipe0 { + cell-index = <0>; + compatible = "qcom,cam-ipe"; + regulator-names = "ipe0-vdd"; + ipe0-vdd-supply = <&ipe_0_gdsc>; + clock-names = "ipe_0_ahb_clk", + "ipe_0_areg_clk", + "ipe_0_axi_clk", + "ipe_0_clk", + "ipe_0_clk_src"; + src-clock-name = "ipe_0_clk_src"; + clocks = <&clock_camcc CAM_CC_IPE_0_AHB_CLK>, + <&clock_camcc CAM_CC_IPE_0_AREG_CLK>, + <&clock_camcc CAM_CC_IPE_0_AXI_CLK>, + <&clock_camcc CAM_CC_IPE_0_CLK>, + <&clock_camcc CAM_CC_IPE_0_CLK_SRC>; + + clock-rates = <0 0 0 0 240000000>, + <0 0 0 0 404000000>, + <0 0 0 0 480000000>, + <0 0 0 0 538000000>, + <0 0 0 0 600000000>; + clock-cntl-level = "lowsvs", "svs", + "svs_l1", "nominal", "turbo"; +}; + +qcom,ipe1 { + cell-index = <1>; + compatible = "qcom,cam-ipe"; + regulator-names = "ipe1-vdd"; + ipe1-vdd-supply = <&ipe_1_gdsc>; + clock-names = "ipe_1_ahb_clk", + "ipe_1_areg_clk", + "ipe_1_axi_clk", + "ipe_1_clk", + "ipe_1_clk_src"; + src-clock-name = "ipe_1_clk_src"; + clocks = <&clock_camcc CAM_CC_IPE_1_AHB_CLK>, + <&clock_camcc CAM_CC_IPE_1_AREG_CLK>, + <&clock_camcc CAM_CC_IPE_1_AXI_CLK>, + <&clock_camcc CAM_CC_IPE_1_CLK>, + <&clock_camcc CAM_CC_IPE_1_CLK_SRC>; + + clock-rates = <0 0 0 0 240000000>, + <0 0 0 0 404000000>, + <0 0 0 0 480000000>, + <0 0 0 0 538000000>, + <0 0 0 0 600000000>; + clock-cntl-level = "lowsvs", "svs", + "svs_l1", "nominal", "turbo"; +}; + +bps: qcom,bps { + cell-index = <0>; + compatible = "qcom,cam-bps"; + regulator-names = "bps-vdd"; + bps-vdd-supply = <&bps_gdsc>; + clock-names = "bps_ahb_clk", + "bps_areg_clk", + "bps_axi_clk", + "bps_clk", + "bps_clk_src"; + src-clock-name = "bps_clk_src"; + clocks = <&clock_camcc CAM_CC_BPS_AHB_CLK>, + <&clock_camcc CAM_CC_BPS_AREG_CLK>, + <&clock_camcc CAM_CC_BPS_AXI_CLK>, + <&clock_camcc CAM_CC_BPS_CLK>, + <&clock_camcc CAM_CC_BPS_CLK_SRC>; + + clock-rates = <0 0 0 0 200000000>, + <0 0 0 0 404000000>, + <0 0 0 0 480000000>, + <0 0 0 0 600000000>, + <0 0 0 0 600000000>; + clock-cntl-level = "lowsvs", "svs", + "svs_l1", "nominal", "turbo"; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-ife-csid.txt b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-ife-csid.txt new file mode 100644 index 000000000000..ecff78ee1b27 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-ife-csid.txt @@ -0,0 +1,121 @@ +* Qualcomm Technologies, Inc. MSM Camera IFE CSID + +Camera IFE CSID device provides the definitions for enabling +the IFE CSID hardware. It also provides the functions for the client +to control the IFE CSID hardware. + +======================= +Required Node Structure +======================= +The IFE CSID device is described in one level of the device node. + +====================================== +First Level Node - CAM IFE CSID device +====================================== +- compatible + Usage: required + Value type: <string> + Definition: Should be "qcom,csid170", "qcom,csid175", "qcom,csid175_200", + "qcom,csid480", "qcom,csid-lite170", "qcom,csid-lite175", + "qcom,csid-lite480" or "qcom,csid-custom480". + +- cell-index + Usage: required + Value type: <u32> + Definition: Should specify the hardware index id. + +- reg-names + Usage: required + Value type: <string> + Definition: Should be "csid". + +- reg + Usage: required + Value type: <u32> + Definition: Register values. + +- interrupt-names + Usage: Required + Value type: <string> + Definition: Name of the interrupt. + +- interrupts + Usage: Required + Value type: <u32> + Definition: Interrupt associated with IFE CSID HW. + +- regulator-names + Usage: required + Value type: <string> + Definition: Name of the regulator resources for IFE CSID HW. + +- xxxx-supply + Usage: required + Value type: <phandle> + Definition: Regulator reference corresponding to the names listed in + "regulator-names". + +- clock-names + Usage: required + Value type: <string> + Definition: List of clock names required for IFE CSID HW. + +- clocks + Usage: required + Value type: <phandle> + Definition: List of clocks used for IFE CSID HW. + +- clock-rates + Usage: required + Value type: <u32> + Definition: List of clocks rates. + +- clock-cntl-level + Usage: required + Value type: <string> + Definition: All different clock level node can support. + +- src-clock-name + Usage: required + Value type: <string> + Definition: Source clock name. + +- clock-control-debugfs + Usage: optional + Value type: <string> + Definition: Enable/Disable clk rate control. + +Example: + + qcom,csid0@acb3000 { + cell-index = <0>; + compatible = "qcom,csid480"; + reg = <0xacb3000 0x1000>; + reg-names = "csid"; + interrupts = <0 464 0>; + interrupt-names = "csid"; + vdd-names = "camss", "ife0"; + camss-supply = <&titan_top_gdsc>; + ife0-supply = <&ife_0_gdsc>; + clock-names = "soc_ahb_clk", + "cpas_ahb_clk", + "slow_ahb_clk_src", + "ife_clk", + "ife_clk_src", + "ife_csid_clk", + "ife_csid_clk_src", + "ife_cphy_rx_clk", + "cphy_rx_clk_src"; + clocks = <&clock_camcc CAM_CC_SOC_AHB_CLK>, + <&clock_camcc CAM_CC_CPAS_AHB_CLK>, + <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_0_CLK>, + <&clock_camcc CAM_CC_IFE_0_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_0_CSID_CLK>, + <&clock_camcc CAM_CC_IFE_0_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>; + clock-rates = <0 0 80000000 0 320000000 0 384000000 0 384000000>; + src-clock-name = "ife_csid_clk_src"; + status = "ok"; + }; diff --git a/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-isp.txt b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-isp.txt new file mode 100644 index 000000000000..896eb9f4d12b --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-isp.txt @@ -0,0 +1,36 @@ +* Qualcomm Technologies, Inc. MSM Camera ISP + +The MSM camera ISP driver provides the definitions for enabling +the Camera ISP hadware. It provides the functions for the Client to +control the ISP hardware. + +======================= +Required Node Structure +======================= +The camera ISP device is described in one level of device node. + +================================== +First Level Node - CAM ISP device +================================== +- compatible + Usage: required + Value type: <string> + Definition: Should be "qcom,cam-isp". + +- arch-compat + Usage: required + Value type: <string> + Definition: Should be "vfe" or "ife". + +- ubwc-static-cfg + Usage: optional + Value type: <u32> + Definition: IFE UBWC static configuration based on DDR device type. + +Example: + + qcom,cam-isp { + compatible = "qcom,cam-isp"; + arch-compat = "ife"; + status = "ok"; + }; diff --git a/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-jpeg.txt b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-jpeg.txt new file mode 100644 index 000000000000..73e99b25cd8f --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-jpeg.txt @@ -0,0 +1,186 @@ +* Qualcomm Technologies, Inc. MSM Camera JPEG + +The MSM camera JPEG devices are implemented multiple device nodes. +The root JPEG device node has properties defined to hint the driver +about the number of Encoder and DMA nodes available during the +probe sequence. Each node has multiple properties defined +for interrupts, clocks and regulators. + +======================= +Required Node Structure +======================= +JPEG root interface node takes care of the handling account for number +of Encoder and DMA devices present on the hardware. + +- compatible + Usage: required + Value type: <string> + Definition: Should be "qcom,cam-jpeg". + +- compat-hw-name + Usage: required + Value type: <string> + Definition: Should be "qcom,jpegenc" or "qcom,jpegdma". + +- num-jpeg-enc + Usage: required + Value type: <u32> + Definition: Number of supported Encoder HW blocks. + +- num-jpeg-dma + Usage: required + Value type: <u32> + Definition: Number of supported DMA HW blocks. + +Example: + qcom,cam-jpeg { + compatible = "qcom,cam-jpeg"; + compat-hw-name = "qcom,jpegenc", + "qcom,jpegdma"; + num-jpeg-enc = <1>; + num-jpeg-dma = <1>; + status = "ok"; + }; + + +======================= +Required Node Structure +======================= +Encoder/DMA Nodes provide interface for JPEG driver about +the device register map, interrupt map, clocks and regulators. + +- cell-index + Usage: required + Value type: <u32> + Definition: Node instance number. + +- compatible + Usage: required + Value type: <string> + Definition: Should be "qcom,cam_jpeg_enc". + +- reg-names + Usage: optional + Value type: <string> + Definition: Name of the register resources. + +- reg + Usage: optional + Value type: <u32> + Definition: Register values. + +- reg-cam-base + Usage: optional + Value type: <u32> + Definition: Offset of the register space compared to + to Camera base register space. + +- interrupt-names + Usage: optional + Value type: <string> + Definition: Name of the interrupt. + +- interrupts + Usage: optional + Value type: <u32> + Definition: Interrupt associated with JPEG HW. + +- regulator-names + Usage: required + Value type: <string> + Definition: Name of the regulator resources for JPEG HW. + +- camss-vdd-supply + Usage: required + Value type: <phandle> + Definition: Regulator reference corresponding to the names listed + in "regulator-names". + +- clock-names + Usage: required + Value type: <string> + Definition: List of clock names required for JPEG HW. + +- clocks + Usage: required + Value type: <phandle> + Definition: List of clocks used for JPEG HW. + +- clock-rates + Usage: required + Value type: <u32> + Definition: List of clocks rates. + +- src-clock-name + Usage: required + Value type: <string> + Definition: Source clock name. + +- clock-cntl-level + Usage: required + Value type: <string> + Definition: List of strings corresponds clock-rates levels. + Supported strings: minsvs, lowsvs, svs, svs_l1, nominal, turbo. + +Examples: + cam_jpeg_enc: qcom,jpegenc@ac4e000 { + cell-index = <0>; + compatible = "qcom,cam_jpeg_enc"; + reg-names = "jpege_hw"; + reg = <0xac4e000 0x4000>; + reg-cam-base = <0x4e000>; + interrupt-names = "jpeg"; + interrupts = <0 474 0>; + regulator-names = "camss-vdd"; + camss-vdd-supply = <&titan_top_gdsc>; + clock-names = "camera_ahb", + "camera_axi", + "soc_ahb_clk", + "cpas_ahb_clk", + "camnoc_axi_clk", + "jpegenc_clk_src", + "jpegenc_clk"; + clocks = <&clock_gcc GCC_CAMERA_AHB_CLK>, + <&clock_gcc GCC_CAMERA_AXI_CLK>, + <&clock_camcc CAM_CC_SOC_AHB_CLK>, + <&clock_camcc CAM_CC_CPAS_AHB_CLK>, + <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, + <&clock_camcc CAM_CC_JPEG_CLK_SRC>, + <&clock_camcc CAM_CC_JPEG_CLK>; + + clock-rates = <0 0 0 0 0 600000000 0>; + src-clock-name = "jpegenc_clk_src"; + clock-cntl-level = "nominal"; + status = "ok"; + }; + + cam_jpeg_dma: qcom,jpegdma@0xac52000{ + cell-index = <0>; + compatible = "qcom,cam_jpeg_dma"; + reg-names = "jpegdma_hw"; + reg = <0xac52000 0x4000>; + reg-cam-base = <0x52000>; + interrupt-names = "jpegdma"; + interrupts = <0 475 0>; + regulator-names = "camss-vdd"; + camss-vdd-supply = <&titan_top_gdsc>; + clock-names = "camera_ahb", + "camera_axi", + "soc_ahb_clk", + "cpas_ahb_clk", + "camnoc_axi_clk", + "jpegdma_clk_src", + "jpegdma_clk"; + clocks = <&clock_gcc GCC_CAMERA_AHB_CLK>, + <&clock_gcc GCC_CAMERA_AXI_CLK>, + <&clock_camcc CAM_CC_SOC_AHB_CLK>, + <&clock_camcc CAM_CC_CPAS_AHB_CLK>, + <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, + <&clock_camcc CAM_CC_JPEG_CLK_SRC>, + <&clock_camcc CAM_CC_JPEG_CLK>; + + clock-rates = <0 0 0 0 0 600000000 0>; + src-clock-name = "jpegdma_clk_src"; + clock-cntl-level = "nominal"; + status = "ok"; + }; diff --git a/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-lrme.txt b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-lrme.txt new file mode 100644 index 000000000000..409be3f08de4 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-lrme.txt @@ -0,0 +1,148 @@ +* Qualcomm Technologies, Inc. MSM Camera LRME + +The MSM camera Low Resolution Motion Estimation device provides dependency +definitions for enabling Camera LRME HW. MSM camera LRME is implemented in +multiple device nodes. The root LRME device node has properties defined to +hint the driver about the LRME HW nodes available during the probe sequence. +Each node has multiple properties defined for interrupts, clocks and +regulators. + +======================= +Required Node Structure +======================= +LRME root interface node takes care of the handling LRME high level +driver handling and controls underlying LRME hardware present. + +- compatible + Usage: required + Value type: <string> + Definition: Should be "qcom,cam-lrme" + +- compat-hw-name + Usage: required + Value type: <string> + Definition: Should be "qcom,lrme" + +- num-lrme + Usage: required + Value type: <u32> + Definition: Number of supported LRME HW blocks + +Example: + qcom,cam-lrme { + compatible = "qcom,cam-lrme"; + compat-hw-name = "qcom,lrme"; + num-lrme = <1>; + }; + +======================= +Required Node Structure +======================= +LRME Node provides interface for Low Resolution Motion Estimation hardware +driver about the device register map, interrupt map, clocks, regulators. + +- cell-index + Usage: required + Value type: <u32> + Definition: Node instance number + +- compatible + Usage: required + Value type: <string> + Definition: Should be "qcom,lrme" + +- reg-names + Usage: optional + Value type: <string> + Definition: Name of the register resources + +- reg + Usage: optional + Value type: <u32> + Definition: Register values + +- reg-cam-base + Usage: optional + Value type: <u32> + Definition: Offset of the register space compared to + to Camera base register space + +- interrupt-names + Usage: optional + Value type: <string> + Definition: Name of the interrupt + +- interrupts + Usage: optional + Value type: <u32> + Definition: Interrupt line associated with LRME HW + +- regulator-names + Usage: required + Value type: <string> + Definition: Name of the regulator resources for LRME HW + +- camss-supply + Usage: required + Value type: <phandle> + Definition: Regulator reference corresponding to the names listed + in "regulator-names" + +- clock-names + Usage: required + Value type: <string> + Definition: List of clock names required for LRME HW + +- clocks + Usage: required + Value type: <phandle> + Definition: List of clocks required for LRME HW + +- clock-rates + Usage: required + Value type: <u32> + Definition: List of clocks rates + +- clock-cntl-level + Usage: required + Value type: <string> + Definition: List of strings corresponds clock-rates levels + Supported strings: minsvs, lowsvs, svs, svs_l1, nominal, turbo + +- src-clock-name + Usage: required + Value type: <string> + Definition: Source clock name + +Examples: + cam_lrme: qcom,lrme@ac6b000 { + cell-index = <0>; + compatible = "qcom,lrme"; + reg-names = "lrme"; + reg = <0xac6b000 0xa00>; + reg-cam-base = <0x6b000>; + interrupt-names = "lrme"; + interrupts = <0 476 0>; + regulator-names = "camss"; + camss-supply = <&titan_top_gdsc>; + clock-names = "camera_ahb", + "camera_axi", + "soc_ahb_clk", + "cpas_ahb_clk", + "camnoc_axi_clk", + "lrme_clk_src", + "lrme_clk"; + clocks = <&clock_gcc GCC_CAMERA_AHB_CLK>, + <&clock_gcc GCC_CAMERA_AXI_CLK>, + <&clock_camcc CAM_CC_SOC_AHB_CLK>, + <&clock_camcc CAM_CC_CPAS_AHB_CLK>, + <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, + <&clock_camcc CAM_CC_LRME_CLK_SRC>, + <&clock_camcc CAM_CC_LRME_CLK>; + clock-rates = <0 0 0 0 0 0 0>, + <0 0 0 0 0 19200000 19200000>, + <0 0 0 0 0 19200000 19200000>, + <0 0 0 0 0 19200000 19200000>; + clock-cntl-level = "lowsvs", "svs", "svs_l1", "turbo"; + src-clock-name = "lrme_core_clk_src"; + }; diff --git a/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-smmu.txt b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-smmu.txt new file mode 100644 index 000000000000..eca2bd82ec79 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-smmu.txt @@ -0,0 +1,142 @@ +* Qualcomm Technologies, Inc. MSM Camera SMMU + +The MSM camera SMMU device provides SMMU context bank definitions +for all HW blocks that need to map IOVA to physical memory. These +definitions consist of various properties that define how the +IOVA address space is laid out for each HW block in the camera +subsystem. + +======================= +Required Node Structure +======================= +The camera SMMU device must be described in three levels of device nodes. The +first level describes the overall SMMU device. Within it, second level nodes +describe individual context banks that map different stream ids. There can +also be second level nodes describing firmware device nodes. Each HW block +such as IFE, ICP maps into these second level device nodes. All context bank +specific properties that define how the IOVA is laid out is contained within +third level device nodes within the second level device nodes. + +During the kernel initialization all the devices are probed recursively and +a device pointer is created for each context bank keeping track of the IOVA +mapping information. + +Duplicate regions of the same type are not allowed within the same +context bank. All context banks must contain an IO region at the very least. + +================================== +First Level Node - CAM SMMU device +================================== +- compatible + Usage: required + Value type: <string> + Definition: Should be "qcom,msm-cam-smmu". + +=================================================================== +Second Level Node - CAM SMMU context bank device or firmware device +=================================================================== +- compatible + Usage: required + Value type: <string> + Definition: Should be "qcom,msm-cam-smmu-cb" or "qcom,msm-cam-smmu-fw-dev". + +- memory-region + Usage: optional + Value type: <phandle> + Definition: Should specify the phandle of the memory region for firmware. + allocation + +- iommus + Usage: required + Value type: <phandle u32 u32> + Definition: first cell is phandle of the iommu, second cell is stream id + and third cell is SMR mask. + +- label + Usage: required + Value type: <string> + Definition: Should specify a string label to identify the context bank. + +- qcom,secure-cb + Usage: optional + Value type: boolean + Definition: Specifies if the context bank is a secure context bank. + +============================================= +Third Level Node - CAM SMMU memory map device +============================================= +- iova-region-name + Usage: required + Value type: <string> + Definition: Should specify a string label to identify the IOVA region. + +- iova-region-start + Usage: required + Value type: <u32> + Definition: Should specify start IOVA for region. + +- iova-region-len + Usage: required + Value type: <u32> + Definition: Should specify length for IOVA region. + +- iova-region-id + Usage: required + Value type: <u32> + Definition: Should specify the numerical identifier for IOVA region. + Allowed values are: 0x00 to 0x03 + - Firmware region: 0x00 + - Shared region: 0x01 + - Scratch region: 0x02 + - IO region: 0x03 + +- iova-granularity + Usage: optional + Value type: <u32> + Definition: Should specify IOVA granularity for shared memory region. + +Example: + qcom,cam_smmu@0 { + compatible = "qcom,msm-cam-smmu"; + + msm_cam_smmu_icp { + compatible = "qcom,msm-cam-smmu-cb"; + iommus = <&apps_smmu 0x1078>, + <&apps_smmu 0x1020>, + <&apps_smmu 0x1028>, + <&apps_smmu 0x1040>, + <&apps_smmu 0x1048>, + <&apps_smmu 0x1030>, + <&apps_smmu 0x1050>; + label = "icp"; + icp_iova_mem_map: iova-mem-map { + iova-mem-region-firmware { + /* Firmware region is 5MB */ + iova-region-name = "firmware"; + iova-region-start = <0x0>; + iova-region-len = <0x500000>; + iova-region-id = <0x0>; + status = "ok"; + }; + + iova-mem-region-shared { + /* Shared region is 100MB long */ + iova-region-name = "shared"; + iova-region-start = <0x7400000>; + iova-region-len = <0x6400000>; + iova-region-id = <0x1>; + iova-granularity = <0x15>; + status = "ok"; + }; + + iova-mem-region-io { + /* IO region is approximately 3.5 GB */ + iova-region-name = "io"; + iova-region-start = <0xd800000>; + iova-region-len = <0xd2800000>; + iova-region-id = <0x3>; + status = "ok"; + }; + }; + }; + }; diff --git a/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-vfe.txt b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-vfe.txt new file mode 100644 index 000000000000..2866d67cf5e2 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-cam-vfe.txt @@ -0,0 +1,154 @@ +* Qualcomm Technologies, Inc. MSM Camera VFE + +Camera VFE device provides the definitions for enabling +the VFE hardware. It also provides the functions for the client +to control the VFE hardware. + +======================= +Required Node Structure +======================= +The VFE device is described in one level of the device node. + +====================================== +First Level Node - CAM VFE device +====================================== +Required properties: +- compatible + Usage: required + Value type: <string> + Definition: Should specify the compatibility string for matching the + driver. e.g. "qcom,vfe480", "qcom,vfe175", "qcom,vfe170", "qcom,vfe175_130", + "qcom,vfe-lite480", "qcom,vfe-lite175", "qcom,vfe-lite175_130", "qcom,vfe-lite170". + +- cell-index + Usage: required + Value type: <u32> + Definition: Should specify the hardware index id. + +- reg-names + Usage: required + Value type: <string> + Definition: Should specify the name of the register block. + +- reg + Usage: required + Value type: <u32> + Definition: Register values. + +- interrupt-names + Usage: Required + Value type: <string> + Definition: Name of the interrupt. + +- interrupts + Usage: Required + Value type: <u32> + Definition: Interrupt associated with VFE HW. + +- regulator-names + Usage: required + Value type: <string> + Definition: Name of the regulator resources for VFE HW. + +- xxxx-supply + Usage: required + Value type: <phandle> + Definition: Regulator reference corresponding to the names listed in + "regulator-names". + +- clock-names + Usage: required + Value type: <string> + Definition: List of clock names required for VFE HW. + +- clocks + Usage: required + Value type: <phandle> + Definition: List of clocks used for VFE HW. + +- clock-rates + Usage: required + Value type: <u32> + Definition: List of clocks rates. + +- src-clock-name + Usage: required + Value type: <string> + Definition: Source clock name. + +Optional properties: +- clock-names-option + Usage: optional + Value type: <string> + Definition: Optional clock names. + +- clocks-option + Usage: required if clock-names-option defined + Value type: <phandle> + Definition: List of optinal clocks used for VFE HW. + +- clock-rates-option + Usage: required if clock-names-option defined + Value type: <u32> + Definition: List of clocks rates for optional clocks. + +- clock-control-debugfs + Usage: optional + Value type: <string> + Definition: Enable/Disable clk rate control. + +- qcom,cam-cx-ipeak: + Usage: optional + Value type: <phandle bit> + phandle - phandle of CX Ipeak device node + bit - Every bit corresponds to a client of CX Ipeak + Definition: CX Ipeak is a mitigation scheme which throttles camera frequency + if all the clients are running at their respective threshold + frequencies to limit CX peak current. + driver in the relevant register. + +- scl-clk-names: + Usage: optional + Value type: <string> + Definition: Scalable clock names to identify which clocks needs to update + along with source clock. + +Example: + qcom,vfe0@acaf000 { + cell-index = <0>; + compatible = "qcom,vfe480"; + reg-names = "ife"; + reg = <0xacaf000 0x4000>; + interrupts = <0 465 0>; + interrupt-names = "ife"; + vdd-names = "camss-vdd", "ife0-vdd"; + camss-vdd-supply = <&titan_top_gdsc>; + ife0-vdd-supply = <&ife_0_gdsc>; + clock-names = "soc_ahb_clk", + "cpas_ahb_clk", + "slow_ahb_clk_src", + "ife_clk", + "ife_clk_src", + "ife_csid_clk", + "ife_csid_clk_src", + "camnoc_axi_clk", + "ife_axi_clk", + clocks = <&clock_camcc CAM_CC_SOC_AHB_CLK>, + <&clock_camcc CAM_CC_CPAS_AHB_CLK>, + <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_0_CLK>, + <&clock_camcc CAM_CC_IFE_0_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_0_CSID_CLK>, + <&clock_camcc CAM_CC_IFE_0_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, + <&clock_camcc CAM_CC_IFE_0_AXI_CLK>, + clock-rates = <0 0 80000000 0 320000000 0 384000000 0 0 0>; + src-clock-name = "ife_clk_src"; + clock-names-option = "ife_dsp_clk"; + clocks-option = <&clock_camcc CAM_CC_IFE_0_DSP_CLK>; + clock-rates-option = <600000000>; + scl-clk-en; + scl-clk-names = "ife_axi_clk"; + qcom,cam-cx-ipeak = <&cx_ipeak_lm 2>; + status = "ok"; + }; diff --git a/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-camera-flash.txt b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-camera-flash.txt new file mode 100644 index 000000000000..ab81329df08e --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-camera-flash.txt @@ -0,0 +1,132 @@ +* Qualcomm Technologies, Inc. MSM FLASH + +The MSM camera Flash driver provides the definitions for +enabling and disabling LED Torch/Flash by requesting it to +PMIC/I2C/GPIO based hardware. It provides the functions for +the Client to control the Flash hardware. + +======================================================= +Required Node Structure +======================================================= +The Flash device is described in one level of the device node. + +====================================== +First Level Node - CAM FLASH device +====================================== +- compatible + Usage: required + Value type: <string> + Definition: Should be "qcom,camera-flash". + +- cell-index + Usage: required + Value type: <u32> + Definition: Should specify the hardware index id. + +- reg + Usage: required + Value type: <u32> + Definition: Register values. + +- flash-source + Usage: required + Value type: <phandle> + Definition: Should contain array of phandles to Flash source nodes. + +- torch-source + Usage: required + Value type: <phandle> + Definition: Should contain array of phandles to torch source nodes. + +- switch-source + Usage: Optional + Value type: <phandle> + Definition: Should contain phandle to switch source nodes. + +- slave-id + Usage: optional + Value type: <u32> + Definition: should contain i2c slave address, device id address + and expected id read value. + +- cci-master + Usage: optional + Value type: <u32> + Definition: should contain i2c master id to be used for this camera + flash. + +- max-current + Usage: optional + Value type: <u32> + Definition: Max current in mA supported by flash + +- max-duration + Usage: optional + Value type: <u32> + Definition: Max duration in ms flash can glow. + +- wled-flash-support + Usage: optional + Value type: <boolean> + Definition: To identity wled flash hardware support. + +- gpios + Usage: optional + Value type: <u32> + Definition: should specify the gpios to be used for the flash. + +- gpio-req-tbl-num + Usage: optional + Value type: <u32> + Definition: should specify the gpio table index. + +- gpio-req-tbl-flags + Usage: optional + Value type: <u32> + Definition: should specify the gpio functions. + +- gpio-req-tbl-label + Usage: optional + Value type: <u32> + Definition: should specify the gpio labels. + +- gpio-flash-reset + Usage: optional + Value type: <u32> + Definition: should contain index to gpio used by flash's "flash reset" pin. + +- gpio-flash-en + Usage: optional + Value type: <u32> + Definition: should contain index to gpio used by flash's "flash enable" pin. + +- gpio-flash-now + Usage: optional + Value type: <u32> + Definition: should contain index to gpio used by flash's "flash now" pin. + +Example: + +led_flash_rear: qcom,camera-flash@0 { + reg = <0x00 0x00>; + cell-index = <0>; + compatible = "qcom,camera-flash"; + flash-source = <&pmi8998_flash0 &pmi8998_flash1>; + torch-source = <&pmi8998_torch0 &pmi8998_torch1>; + switch-source = <&pmi8998_switch0>; + wled-flash-support; + qcom,slave-id = <0x00 0x00 0x0011>; + qcom,cci-master = <0>; + gpios = <&msmgpio 23 0>, + <&msmgpio 24 0>; + <&msmgpio 25 0>; + qcom,gpio-flash-reset = <0>; + qcom,gpio-flash-en = <0>; + qcom,gpio-flash-now = <1>; + qcom,gpio-req-tbl-num = <0 1>; + qcom,gpio-req-tbl-flags = <0 0>; + qcom,gpio-req-tbl-label = "FLASH_EN", + "FLASH_NOW"; + qcom,max-current = <1500>; + qcom,max-duration = <1200>; + }; diff --git a/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-camera.txt b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-camera.txt new file mode 100644 index 000000000000..04548caa330b --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/camera/bindings/msm-camera.txt @@ -0,0 +1,13 @@ +* Qualcomm Technologies, Inc. MSM Camera + +Required properties: +- compatible : + - "qcom,cam-req-mgr" +- qcom,sensor-manual-probe : specify if sensor probes at kernel boot time or user driven + +Example: + + qcom,cam-req-mgr { + compatible = "qcom,cam-req-mgr"; + qcom,sensor-manual-probe; + }; diff --git a/arch/arm64/boot/dts/vendor/qcom/camera/kona-camera-sensor-cdp.dtsi b/arch/arm64/boot/dts/vendor/qcom/camera/kona-camera-sensor-cdp.dtsi new file mode 100644 index 000000000000..dee387a5e04c --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/camera/kona-camera-sensor-cdp.dtsi @@ -0,0 +1,674 @@ +#include <dt-bindings/clock/qcom,camcc-kona.h> + +&soc { + led_flash_rear: qcom,camera-flash0 { + cell-index = <0>; + compatible = "qcom,camera-flash"; + flash-source = <&pm8150l_flash0 &pm8150l_flash1>; + torch-source = <&pm8150l_torch0 &pm8150l_torch1>; + switch-source = <&pm8150l_switch2>; + status = "ok"; + }; + + led_flash_rear_aux: qcom,camera-flash1 { + cell-index = <1>; + compatible = "qcom,camera-flash"; + flash-source = <&pm8150l_flash0 &pm8150l_flash1>; + torch-source = <&pm8150l_torch0 &pm8150l_torch1>; + switch-source = <&pm8150l_switch2>; + status = "ok"; + }; + + led_flash_triple_rear: qcom,camera-flash@4 { + cell-index = <4>; + compatible = "qcom,camera-flash"; + flash-source = <&pm8150l_flash0 &pm8150l_flash1>; + torch-source = <&pm8150l_torch0 &pm8150l_torch1>; + switch-source = <&pm8150l_switch2>; + status = "ok"; + }; + + led_flash_triple_rear_aux: qcom,camera-flash@5 { + cell-index = <5>; + compatible = "qcom,camera-flash"; + flash-source = <&pm8150l_flash0 &pm8150l_flash1>; + torch-source = <&pm8150l_torch0 &pm8150l_torch1>; + switch-source = <&pm8150l_switch2>; + status = "ok"; + }; + + led_flash_triple_rear_aux2: qcom,camera-flash@6 { + cell-index = <6>; + compatible = "qcom,camera-flash"; + flash-source = <&pm8150l_flash0 &pm8150l_flash1>; + torch-source = <&pm8150l_torch0 &pm8150l_torch1>; + switch-source = <&pm8150l_switch2>; + status = "ok"; + }; + + qcom,cam-res-mgr { + compatible = "qcom,cam-res-mgr"; + status = "ok"; + }; +}; + +&cam_cci0 { + actuator_rear: qcom,actuator0 { + cell-index = <0>; + compatible = "qcom,actuator"; + cci-master = <0>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <2856000>; + rgltr-max-voltage = <3104000>; + rgltr-load-current = <100000>; + }; + + actuator_rear_aux: qcom,actuator1 { + cell-index = <1>; + compatible = "qcom,actuator"; + cci-master = <0>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <2856000>; + rgltr-max-voltage = <3104000>; + rgltr-load-current = <100000>; + }; + + actuator_triple_wide: qcom,actuator4 { + cell-index = <4>; + compatible = "qcom,actuator"; + cci-master = <0>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <2856000>; + rgltr-max-voltage = <3104000>; + rgltr-load-current = <100000>; + }; + + actuator_triple_tele: qcom,actuator5 { + cell-index = <5>; + compatible = "qcom,actuator"; + cci-master = <0>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <2856000>; + rgltr-max-voltage = <3104000>; + rgltr-load-current = <100000>; + }; + + actuator_triple_uw: qcom,actuator6 { + cell-index = <6>; + compatible = "qcom,actuator"; + cci-master = <1>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <2856000>; + rgltr-max-voltage = <3104000>; + rgltr-load-current = <100000>; + }; + + eeprom_rear: qcom,eeprom0 { + cell-index = <0>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&pm8009_l7>; + cam_vana-supply = <&pm8009_l5>; + cam_vdig-supply = <&pm8009_l1>; + cam_clk-supply = <&titan_top_gdsc>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2800000 1104000 0 2856000>; + rgltr-max-voltage = <1800000 3000000 1104000 0 3104000>; + rgltr-load-current = <120000 80000 1200000 0 100000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active + &cam_sensor_active_rear>; + pinctrl-1 = <&cam_sensor_mclk0_suspend + &cam_sensor_suspend_rear>; + gpios = <&tlmm 94 0>, + <&tlmm 93 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK0", + "CAM_RESET0"; + sensor-position = <0>; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + eeprom_rear_aux: qcom,eeprom1 { + cell-index = <1>; + compatible = "qcom,eeprom"; + cam_vdig-supply = <&pm8009_l2>; + cam_vio-supply = <&pm8009_l7>; + cam_vana-supply = <&pm8009_l6>; + cam_clk-supply = <&titan_top_gdsc>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2800000 1200000 0 2856000>; + rgltr-max-voltage = <1800000 3000000 1200000 0 3104000>; + rgltr-load-current = <120000 80000 1200000 0 100000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk1_active + &cam_sensor_active_rear_aux>; + pinctrl-1 = <&cam_sensor_mclk1_suspend + &cam_sensor_suspend_rear_aux>; + gpios = <&tlmm 95 0>, + <&tlmm 92 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK1", + "CAM_RESET1"; + sensor-position = <0>; + sensor-mode = <0>; + cci-master = <1>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + eeprom_triple_wide: qcom,eeprom4 { + cell-index = <4>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&pm8009_l7>; + cam_vana-supply = <&pm8009_l5>; + cam_vdig-supply = <&pm8009_l1>; + cam_clk-supply = <&titan_top_gdsc>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2800000 1104000 0 2856000>; + rgltr-max-voltage = <1800000 3000000 1104000 0 3104000>; + rgltr-load-current = <120000 80000 1200000 0 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active + &cam_sensor_active_rear>; + pinctrl-1 = <&cam_sensor_mclk0_suspend + &cam_sensor_suspend_rear>; + gpios = <&tlmm 94 0>, + <&tlmm 93 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK0", + "CAM_RESET0"; + sensor-position = <0>; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + eeprom_triple_tele: qcom,eeprom5 { + cell-index = <5>; + compatible = "qcom,eeprom"; + cam_vdig-supply = <&pm8009_l2>; + cam_vio-supply = <&pm8009_l7>; + cam_vana-supply = <&pm8009_l6>; + cam_clk-supply = <&titan_top_gdsc>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2800000 1200000 0 2856000>; + rgltr-max-voltage = <1800000 3000000 1200000 0 3104000>; + rgltr-load-current = <120000 80000 1200000 0 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk1_active + &cam_sensor_active_rear_aux>; + pinctrl-1 = <&cam_sensor_mclk1_suspend + &cam_sensor_suspend_rear_aux>; + gpios = <&tlmm 95 0>, + <&tlmm 92 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK1", + "CAM_RESET1"; + sensor-position = <0>; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + eeprom_triple_uw: qcom,eeprom6 { + cell-index = <6>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&pm8009_l7>; + cam_vana-supply = <&pm8009_l6>; + cam_vdig-supply = <&pm8009_l3>; + cam_clk-supply = <&titan_top_gdsc>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2800000 1056000 0 2856000>; + rgltr-max-voltage = <1800000 3000000 1056000 0 3104000>; + rgltr-load-current = <120000 80000 1200000 0 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk2_active + &cam_sensor_active_rst2>; + pinctrl-1 = <&cam_sensor_mclk2_suspend + &cam_sensor_suspend_rst2>; + gpios = <&tlmm 96 0>, + <&tlmm 78 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK2", + "CAM_RESET2"; + sensor-position = <1>; + sensor-mode = <0>; + cci-master = <1>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor0 { + cell-index = <0>; + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <0>; + sensor-position-roll = <90>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + actuator-src = <&actuator_rear>; + led-flash-src = <&led_flash_rear>; + eeprom-src = <&eeprom_rear>; + cam_vio-supply = <&pm8009_l7>; + cam_bob-supply = <&pm8150a_bob>; + cam_vana-supply = <&pm8009_l5>; + cam_vdig-supply = <&pm8009_l1>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_bob"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1104000 0 3008000>; + rgltr-max-voltage = <1800000 3000000 1104000 0 3960000>; + rgltr-load-current = <120000 80000 1200000 0 2000000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active + &cam_sensor_active_rear>; + pinctrl-1 = <&cam_sensor_mclk0_suspend + &cam_sensor_suspend_rear>; + gpios = <&tlmm 94 0>, + <&tlmm 93 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK0", + "CAM_RESET0"; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor1 { + cell-index = <1>; + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <1>; + sensor-position-roll = <90>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + eeprom-src = <&eeprom_rear_aux>; + led-flash-src = <&led_flash_rear_aux>; + cam_bob-supply = <&pm8150a_bob>; + cam_vdig-supply = <&pm8009_l2>; + cam_vio-supply = <&pm8009_l7>; + cam_vana-supply = <&pm8009_l6>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_bob"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>; + rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>; + rgltr-load-current = <120000 80000 1200000 0 2000000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk1_active + &cam_sensor_active_rear_aux>; + pinctrl-1 = <&cam_sensor_mclk1_suspend + &cam_sensor_suspend_rear_aux>; + gpios = <&tlmm 95 0>, + <&tlmm 92 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK1", + "CAM_RESET1"; + sensor-mode = <0>; + cci-master = <1>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK1_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor4 { + cell-index = <4>; + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <0>; + sensor-position-roll = <90>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + actuator-src = <&actuator_triple_wide>; + led-flash-src = <&led_flash_triple_rear>; + eeprom-src = <&eeprom_triple_wide>; + cam_vio-supply = <&pm8009_l7>; + cam_bob-supply = <&pm8150a_bob>; + cam_vana-supply = <&pm8009_l5>; + cam_vdig-supply = <&pm8009_l1>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_bob"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1104000 0 3008000>; + rgltr-max-voltage = <1800000 3000000 1104000 0 3960000>; + rgltr-load-current = <120000 80000 1200000 0 2000000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active + &cam_sensor_active_rear>; + pinctrl-1 = <&cam_sensor_mclk0_suspend + &cam_sensor_suspend_rear>; + gpios = <&tlmm 94 0>, + <&tlmm 93 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK0", + "CAM_RESET0"; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor5 { + cell-index = <5>; + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <1>; + sensor-position-roll = <90>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + eeprom-src = <&eeprom_triple_tele>; + actuator-src = <&actuator_triple_tele>; + led-flash-src = <&led_flash_triple_rear_aux>; + cam_bob-supply = <&pm8150a_bob>; + cam_vdig-supply = <&pm8009_l2>; + cam_vio-supply = <&pm8009_l7>; + cam_vana-supply = <&pm8009_l6>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_bob"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>; + rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>; + rgltr-load-current = <120000 80000 1200000 0 2000000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk1_active + &cam_sensor_active_rear_aux>; + pinctrl-1 = <&cam_sensor_mclk1_suspend + &cam_sensor_suspend_rear_aux>; + gpios = <&tlmm 95 0>, + <&tlmm 92 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK1", + "CAM_RESET1"; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK1_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor6 { + cell-index = <6>; + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <2>; + sensor-position-roll = <270>; + sensor-position-pitch = <0>; + sensor-position-yaw = <0>; + eeprom-src = <&eeprom_triple_uw>; + actuator-src = <&actuator_triple_uw>; + led-flash-src = <&led_flash_triple_rear_aux2>; + cam_vio-supply = <&pm8009_l7>; + cam_bob-supply = <&pm8150a_bob>; + cam_vana-supply = <&pm8009_l6>; + cam_vdig-supply = <&pm8009_l3>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_bob"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1056000 0 3008000>; + rgltr-max-voltage = <1800000 3000000 1056000 0 3960000>; + rgltr-load-current = <120000 80000 1200000 0 2000000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk2_active + &cam_sensor_active_rst2>; + pinctrl-1 = <&cam_sensor_mclk2_suspend + &cam_sensor_suspend_rst2>; + gpios = <&tlmm 96 0>, + <&tlmm 78 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK2", + "CAM_RESET2"; + sensor-mode = <0>; + cci-master = <1>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; +}; + +&cam_cci1 { + eeprom_front: qcom,eeprom2 { + cell-index = <2>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&pm8009_l7>; + cam_vana-supply = <&pm8009_l6>; + cam_vdig-supply = <&pm8009_l3>; + cam_clk-supply = <&titan_top_gdsc>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <0 2800000 1056000 0 2856000>; + rgltr-max-voltage = <0 3000000 1056000 0 3104000>; + rgltr-load-current = <0 80000 1200000 0 100000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk2_active + &cam_sensor_active_rst2>; + pinctrl-1 = <&cam_sensor_mclk2_suspend + &cam_sensor_suspend_rst2>; + gpios = <&tlmm 96 0>, + <&tlmm 78 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK2", + "CAM_RESET2"; + sensor-position = <1>; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + eeprom_tof: qcom,eeprom3 { + cell-index = <3>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&pm8009_l7>; + cam_vdig-supply = <&vreg_tof>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vdig", + "cam_clk"; + rgltr-cntrl-support; + rgltr-min-voltage = <0 3600000 0>; + rgltr-max-voltage = <0 3600000 0>; + rgltr-load-current = <180000 120000 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk3_active + &cam_sensor_active_3>; + pinctrl-1 = <&cam_sensor_mclk3_suspend + &cam_sensor_suspend_3>; + gpios = <&tlmm 97 0>, + <&tlmm 109 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK3", + "CAM_RESET3"; + sensor-position = <1>; + sensor-mode = <0>; + cci-master = <1>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK3_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor2 { + cell-index = <2>; + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <2>; + sensor-position-roll = <270>; + sensor-position-pitch = <0>; + sensor-position-yaw = <0>; + eeprom-src = <&eeprom_front>; + cam_vio-supply = <&pm8009_l7>; + cam_bob-supply = <&pm8150a_bob>; + cam_vana-supply = <&pm8009_l6>; + cam_vdig-supply = <&pm8009_l3>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_bob"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1056000 0 3008000>; + rgltr-max-voltage = <1800000 3000000 1056000 0 3960000>; + rgltr-load-current = <120000 80000 1200000 0 2000000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk2_active + &cam_sensor_active_rst2>; + pinctrl-1 = <&cam_sensor_mclk2_suspend + &cam_sensor_suspend_rst2>; + gpios = <&tlmm 96 0>, + <&tlmm 78 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK2", + "CAM_RESET2"; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor3 { + cell-index = <3>; + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <3>; + eeprom-src = <&eeprom_tof>; + sensor-position-roll = <270>; + sensor-position-pitch = <0>; + sensor-position-yaw = <0>; + cam_vio-supply = <&pm8009_l7>; + cam_vdig-supply = <&vreg_tof>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vdig", + "cam_clk"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 3600000 0>; + rgltr-max-voltage = <1800000 3600000 0>; + rgltr-load-current = <180000 120000 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk3_active + &cam_sensor_active_3>; + pinctrl-1 = <&cam_sensor_mclk3_suspend + &cam_sensor_suspend_3>; + gpios = <&tlmm 97 0>, + <&tlmm 109 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK3", + "CAM_RESET3"; + sensor-mode = <0>; + cci-master = <1>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK3_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/camera/kona-camera-sensor-mtp.dtsi b/arch/arm64/boot/dts/vendor/qcom/camera/kona-camera-sensor-mtp.dtsi new file mode 100644 index 000000000000..a1dab4718adf --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/camera/kona-camera-sensor-mtp.dtsi @@ -0,0 +1,676 @@ +#include <dt-bindings/clock/qcom,camcc-kona.h> + +&soc { + led_flash_rear: qcom,camera-flash0 { + cell-index = <0>; + compatible = "qcom,camera-flash"; + flash-source = <&pm8150l_flash0 &pm8150l_flash1>; + torch-source = <&pm8150l_torch0 &pm8150l_torch1>; + switch-source = <&pm8150l_switch2>; + status = "ok"; + }; + + led_flash_rear_aux: qcom,camera-flash1 { + cell-index = <1>; + compatible = "qcom,camera-flash"; + flash-source = <&pm8150l_flash0 &pm8150l_flash1>; + torch-source = <&pm8150l_torch0 &pm8150l_torch1>; + switch-source = <&pm8150l_switch2>; + status = "ok"; + }; + + led_flash_triple_rear: qcom,camera-flash@4 { + cell-index = <4>; + compatible = "qcom,camera-flash"; + flash-source = <&pm8150l_flash0 &pm8150l_flash1>; + torch-source = <&pm8150l_torch0 &pm8150l_torch1>; + switch-source = <&pm8150l_switch2>; + status = "ok"; + }; + + led_flash_triple_rear_aux: qcom,camera-flash@5 { + cell-index = <5>; + compatible = "qcom,camera-flash"; + flash-source = <&pm8150l_flash0 &pm8150l_flash1>; + torch-source = <&pm8150l_torch0 &pm8150l_torch1>; + switch-source = <&pm8150l_switch2>; + status = "ok"; + }; + + led_flash_triple_rear_aux2: qcom,camera-flash@6 { + cell-index = <6>; + compatible = "qcom,camera-flash"; + flash-source = <&pm8150l_flash0 &pm8150l_flash1>; + torch-source = <&pm8150l_torch0 &pm8150l_torch1>; + switch-source = <&pm8150l_switch2>; + status = "ok"; + }; + + qcom,cam-res-mgr { + compatible = "qcom,cam-res-mgr"; + status = "ok"; + }; +}; + +&cam_cci0 { + actuator_rear: qcom,actuator0 { + cell-index = <0>; + compatible = "qcom,actuator"; + cci-master = <0>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <2856000>; + rgltr-max-voltage = <3104000>; + rgltr-load-current = <100000>; + }; + + actuator_rear_aux: qcom,actuator1 { + cell-index = <1>; + compatible = "qcom,actuator"; + cci-master = <1>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <2856000>; + rgltr-max-voltage = <3104000>; + rgltr-load-current = <100000>; + }; + + actuator_triple_wide: qcom,actuator4 { + cell-index = <4>; + compatible = "qcom,actuator"; + cci-master = <0>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <2856000>; + rgltr-max-voltage = <3104000>; + rgltr-load-current = <100000>; + }; + + actuator_triple_tele: qcom,actuator5 { + cell-index = <5>; + compatible = "qcom,actuator"; + cci-master = <1>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <2856000>; + rgltr-max-voltage = <3104000>; + rgltr-load-current = <100000>; + }; + + eeprom_rear: qcom,eeprom0 { + cell-index = <0>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&pm8009_l7>; + cam_vana-supply = <&pm8009_l5>; + cam_vdig-supply = <&pm8009_l1>; + cam_clk-supply = <&titan_top_gdsc>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2800000 1104000 0 2856000>; + rgltr-max-voltage = <1800000 3000000 1104000 0 3104000>; + rgltr-load-current = <120000 80000 1200000 0 100000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active + &cam_sensor_active_rear>; + pinctrl-1 = <&cam_sensor_mclk0_suspend + &cam_sensor_suspend_rear>; + gpios = <&tlmm 94 0>, + <&tlmm 93 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK0", + "CAM_RESET0"; + sensor-position = <0>; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + eeprom_rear_aux: qcom,eeprom1 { + cell-index = <1>; + compatible = "qcom,eeprom"; + cam_vdig-supply = <&pm8009_l2>; + cam_vio-supply = <&pm8009_l7>; + cam_vana-supply = <&pm8009_l6>; + cam_clk-supply = <&titan_top_gdsc>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2800000 1200000 0 2856000>; + rgltr-max-voltage = <1800000 3000000 1200000 0 3104000>; + rgltr-load-current = <120000 80000 1200000 0 100000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk1_active + &cam_sensor_active_rear_aux>; + pinctrl-1 = <&cam_sensor_mclk1_suspend + &cam_sensor_suspend_rear_aux>; + gpios = <&tlmm 95 0>, + <&tlmm 92 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK1", + "CAM_RESET1"; + sensor-position = <0>; + sensor-mode = <0>; + cci-master = <1>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + eeprom_triple_wide: qcom,eeprom4 { + cell-index = <4>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&pm8009_l7>; + cam_vana-supply = <&pm8009_l5>; + cam_vdig-supply = <&pm8009_l1>; + cam_clk-supply = <&titan_top_gdsc>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2800000 1104000 0 2856000>; + rgltr-max-voltage = <1800000 3000000 1104000 0 3104000>; + rgltr-load-current = <120000 80000 1200000 0 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active + &cam_sensor_active_rear>; + pinctrl-1 = <&cam_sensor_mclk0_suspend + &cam_sensor_suspend_rear>; + gpios = <&tlmm 94 0>, + <&tlmm 93 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK0", + "CAM_RESET0"; + sensor-position = <0>; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + eeprom_triple_tele: qcom,eeprom5 { + cell-index = <5>; + compatible = "qcom,eeprom"; + cam_vdig-supply = <&pm8009_l2>; + cam_vio-supply = <&pm8009_l7>; + cam_vana-supply = <&pm8009_l6>; + cam_clk-supply = <&titan_top_gdsc>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2800000 1200000 0 2856000>; + rgltr-max-voltage = <1800000 3000000 1200000 0 3104000>; + rgltr-load-current = <120000 80000 1200000 0 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk1_active + &cam_sensor_active_rear_aux>; + pinctrl-1 = <&cam_sensor_mclk1_suspend + &cam_sensor_suspend_rear_aux>; + gpios = <&tlmm 95 0>, + <&tlmm 92 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK1", + "CAM_RESET1"; + sensor-position = <0>; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor0 { + cell-index = <0>; + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <0>; + sensor-position-roll = <90>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + actuator-src = <&actuator_rear>; + led-flash-src = <&led_flash_rear>; + eeprom-src = <&eeprom_rear>; + cam_vio-supply = <&pm8009_l7>; + cam_bob-supply = <&pm8150a_bob>; + cam_vana-supply = <&pm8009_l5>; + cam_vdig-supply = <&pm8009_l1>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_bob"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1104000 0 3008000>; + rgltr-max-voltage = <1800000 3000000 1104000 0 3960000>; + rgltr-load-current = <120000 80000 1200000 0 2000000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active + &cam_sensor_active_rear>; + pinctrl-1 = <&cam_sensor_mclk0_suspend + &cam_sensor_suspend_rear>; + gpios = <&tlmm 94 0>, + <&tlmm 93 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK0", + "CAM_RESET0"; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor1 { + cell-index = <1>; + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <1>; + sensor-position-roll = <90>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + eeprom-src = <&eeprom_rear_aux>; + led-flash-src = <&led_flash_rear_aux>; + actuator-src = <&actuator_rear_aux>; + cam_bob-supply = <&pm8150a_bob>; + cam_vdig-supply = <&pm8009_l2>; + cam_vio-supply = <&pm8009_l7>; + cam_vana-supply = <&pm8009_l6>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_bob"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>; + rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>; + rgltr-load-current = <120000 80000 1200000 0 2000000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk1_active + &cam_sensor_active_rear_aux>; + pinctrl-1 = <&cam_sensor_mclk1_suspend + &cam_sensor_suspend_rear_aux>; + gpios = <&tlmm 95 0>, + <&tlmm 92 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK1", + "CAM_RESET1"; + sensor-mode = <0>; + cci-master = <1>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK1_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor4 { + cell-index = <4>; + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <0>; + sensor-position-roll = <90>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + actuator-src = <&actuator_triple_wide>; + led-flash-src = <&led_flash_triple_rear>; + eeprom-src = <&eeprom_triple_wide>; + cam_vio-supply = <&pm8009_l7>; + cam_bob-supply = <&pm8150a_bob>; + cam_vana-supply = <&pm8009_l5>; + cam_vdig-supply = <&pm8009_l1>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_bob"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1104000 0 3008000>; + rgltr-max-voltage = <1800000 3000000 1104000 0 3960000>; + rgltr-load-current = <120000 80000 1200000 0 2000000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active + &cam_sensor_active_rear>; + pinctrl-1 = <&cam_sensor_mclk0_suspend + &cam_sensor_suspend_rear>; + gpios = <&tlmm 94 0>, + <&tlmm 93 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK0", + "CAM_RESET0"; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor5 { + cell-index = <5>; + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <1>; + sensor-position-roll = <90>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + eeprom-src = <&eeprom_triple_tele>; + actuator-src = <&actuator_triple_tele>; + led-flash-src = <&led_flash_triple_rear_aux>; + cam_bob-supply = <&pm8150a_bob>; + cam_vdig-supply = <&pm8009_l2>; + cam_vio-supply = <&pm8009_l7>; + cam_vana-supply = <&pm8009_l6>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_bob"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>; + rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>; + rgltr-load-current = <120000 80000 1200000 0 2000000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk1_active + &cam_sensor_active_rear_aux>; + pinctrl-1 = <&cam_sensor_mclk1_suspend + &cam_sensor_suspend_rear_aux>; + gpios = <&tlmm 95 0>, + <&tlmm 92 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK1", + "CAM_RESET1"; + sensor-mode = <0>; + cci-master = <1>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK1_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; +}; + +&cam_cci1 { + actuator_triple_uw: qcom,actuator6 { + cell-index = <6>; + compatible = "qcom,actuator"; + cci-master = <0>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <2856000>; + rgltr-max-voltage = <3104000>; + rgltr-load-current = <100000>; + }; + + eeprom_front: qcom,eeprom2 { + cell-index = <2>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&pm8009_l7>; + cam_vana-supply = <&pm8009_l6>; + cam_vdig-supply = <&pm8009_l3>; + cam_clk-supply = <&titan_top_gdsc>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2800000 1056000 0 2856000>; + rgltr-max-voltage = <1800000 3000000 1056000 0 3104000>; + rgltr-load-current = <120000 80000 1200000 0 100000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk2_active + &cam_sensor_active_rst2>; + pinctrl-1 = <&cam_sensor_mclk2_suspend + &cam_sensor_suspend_rst2>; + gpios = <&tlmm 96 0>, + <&tlmm 78 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK2", + "CAM_RESET2"; + sensor-position = <1>; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + eeprom_triple_uw: qcom,eeprom6 { + cell-index = <6>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&pm8009_l7>; + cam_vana-supply = <&pm8009_l6>; + cam_vdig-supply = <&pm8009_l3>; + cam_clk-supply = <&titan_top_gdsc>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2800000 1056000 0 2856000>; + rgltr-max-voltage = <1800000 3000000 1056000 0 3104000>; + rgltr-load-current = <120000 80000 1200000 0 100000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk2_active + &cam_sensor_active_rst2>; + pinctrl-1 = <&cam_sensor_mclk2_suspend + &cam_sensor_suspend_rst2>; + gpios = <&tlmm 96 0>, + <&tlmm 78 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK2", + "CAM_RESET2"; + sensor-position = <1>; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + eeprom_tof: qcom,eeprom3 { + cell-index = <3>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&pm8009_l7>; + cam_vdig-supply = <&vreg_tof>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vdig", + "cam_clk"; + rgltr-cntrl-support; + rgltr-min-voltage = <0 3600000 0>; + rgltr-max-voltage = <0 3600000 0>; + rgltr-load-current = <180000 120000 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk3_active + &cam_sensor_active_3>; + pinctrl-1 = <&cam_sensor_mclk3_suspend + &cam_sensor_suspend_3>; + gpios = <&tlmm 97 0>, + <&tlmm 109 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK3", + "CAM_RESET3"; + sensor-position = <1>; + sensor-mode = <0>; + cci-master = <1>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK3_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor2 { + cell-index = <2>; + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <2>; + sensor-position-roll = <270>; + sensor-position-pitch = <0>; + sensor-position-yaw = <0>; + eeprom-src = <&eeprom_front>; + cam_vio-supply = <&pm8009_l7>; + cam_bob-supply = <&pm8150a_bob>; + cam_vana-supply = <&pm8009_l6>; + cam_vdig-supply = <&pm8009_l3>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_bob"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1056000 0 3008000>; + rgltr-max-voltage = <1800000 3000000 1056000 0 3960000>; + rgltr-load-current = <120000 80000 1200000 0 2000000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk2_active + &cam_sensor_active_rst2>; + pinctrl-1 = <&cam_sensor_mclk2_suspend + &cam_sensor_suspend_rst2>; + gpios = <&tlmm 96 0>, + <&tlmm 78 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK2", + "CAM_RESET2"; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor3 { + cell-index = <3>; + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <3>; + eeprom-src = <&eeprom_tof>; + sensor-position-roll = <270>; + sensor-position-pitch = <0>; + sensor-position-yaw = <0>; + cam_vio-supply = <&pm8009_l7>; + cam_vdig-supply = <&vreg_tof>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vdig", + "cam_clk"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 3600000 0>; + rgltr-max-voltage = <1800000 3600000 0>; + rgltr-load-current = <180000 120000 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk3_active + &cam_sensor_active_3>; + pinctrl-1 = <&cam_sensor_mclk3_suspend + &cam_sensor_suspend_3>; + gpios = <&tlmm 97 0>, + <&tlmm 109 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK3", + "CAM_RESET3"; + sensor-mode = <0>; + cci-master = <1>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK3_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor6 { + cell-index = <6>; + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <2>; + sensor-position-roll = <90>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + eeprom-src = <&eeprom_triple_uw>; + actuator-src = <&actuator_triple_uw>; + led-flash-src = <&led_flash_triple_rear_aux2>; + cam_vio-supply = <&pm8009_l7>; + cam_bob-supply = <&pm8150a_bob>; + cam_vana-supply = <&pm8009_l6>; + cam_vdig-supply = <&pm8009_l3>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_bob"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1056000 0 3008000>; + rgltr-max-voltage = <1800000 3000000 1056000 0 3960000>; + rgltr-load-current = <120000 80000 1200000 0 2000000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk2_active + &cam_sensor_active_rst2>; + pinctrl-1 = <&cam_sensor_mclk2_suspend + &cam_sensor_suspend_rst2>; + gpios = <&tlmm 96 0>, + <&tlmm 78 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK2", + "CAM_RESET2"; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; +}; + diff --git a/arch/arm64/boot/dts/vendor/qcom/camera/kona-camera-sensor-qrd.dtsi b/arch/arm64/boot/dts/vendor/qcom/camera/kona-camera-sensor-qrd.dtsi new file mode 100644 index 000000000000..9e69a98cf38d --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/camera/kona-camera-sensor-qrd.dtsi @@ -0,0 +1,674 @@ +&soc { + led_flash_rear: qcom,camera-flash0 { + cell-index = <0>; + compatible = "qcom,camera-flash"; + flash-source = <&pm8150l_flash0 &pm8150l_flash1>; + torch-source = <&pm8150l_torch0 &pm8150l_torch1>; + switch-source = <&pm8150l_switch2>; + status = "ok"; + }; + + led_flash_rear_aux: qcom,camera-flash1 { + cell-index = <1>; + compatible = "qcom,camera-flash"; + flash-source = <&pm8150l_flash0 &pm8150l_flash1>; + torch-source = <&pm8150l_torch0 &pm8150l_torch1>; + switch-source = <&pm8150l_switch2>; + status = "ok"; + }; + + led_flash_triple_rear: qcom,camera-flash@4 { + cell-index = <4>; + compatible = "qcom,camera-flash"; + flash-source = <&pm8150l_flash0 &pm8150l_flash1>; + torch-source = <&pm8150l_torch0 &pm8150l_torch1>; + switch-source = <&pm8150l_switch2>; + status = "ok"; + }; + + led_flash_triple_rear_aux: qcom,camera-flash@5 { + cell-index = <5>; + compatible = "qcom,camera-flash"; + flash-source = <&pm8150l_flash0 &pm8150l_flash1>; + torch-source = <&pm8150l_torch0 &pm8150l_torch1>; + switch-source = <&pm8150l_switch2>; + status = "ok"; + }; + + led_flash_triple_rear_aux2: qcom,camera-flash@6 { + cell-index = <6>; + compatible = "qcom,camera-flash"; + flash-source = <&pm8150l_flash0 &pm8150l_flash1>; + torch-source = <&pm8150l_torch0 &pm8150l_torch1>; + switch-source = <&pm8150l_switch2>; + status = "ok"; + }; + + qcom,cam-res-mgr { + compatible = "qcom,cam-res-mgr"; + status = "ok"; + }; +}; + +&cam_cci0 { + actuator_rear: qcom,actuator0 { + cell-index = <0>; + compatible = "qcom,actuator"; + cci-master = <0>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <2856000>; + rgltr-max-voltage = <3104000>; + rgltr-load-current = <100000>; + }; + + actuator_rear_aux: qcom,actuator1 { + cell-index = <1>; + compatible = "qcom,actuator"; + cci-master = <1>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <2856000>; + rgltr-max-voltage = <3104000>; + rgltr-load-current = <100000>; + }; + + actuator_triple_wide: qcom,actuator4 { + cell-index = <4>; + compatible = "qcom,actuator"; + cci-master = <0>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <2856000>; + rgltr-max-voltage = <3104000>; + rgltr-load-current = <100000>; + }; + + actuator_triple_tele: qcom,actuator5 { + cell-index = <5>; + compatible = "qcom,actuator"; + cci-master = <0>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <2856000>; + rgltr-max-voltage = <3104000>; + rgltr-load-current = <100000>; + }; + + actuator_triple_uw: qcom,actuator6 { + cell-index = <6>; + compatible = "qcom,actuator"; + cci-master = <1>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <2856000>; + rgltr-max-voltage = <3104000>; + rgltr-load-current = <100000>; + }; + + eeprom_rear: qcom,eeprom0 { + cell-index = <0>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&pm8009_l7>; + cam_vana-supply = <&pm8009_l5>; + cam_vdig-supply = <&pm8009_l1>; + cam_clk-supply = <&titan_top_gdsc>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2800000 1104000 0 2856000>; + rgltr-max-voltage = <1800000 3000000 1104000 0 3104000>; + rgltr-load-current = <120000 80000 1200000 0 100000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active + &cam_sensor_active_rear>; + pinctrl-1 = <&cam_sensor_mclk0_suspend + &cam_sensor_suspend_rear>; + gpios = <&tlmm 94 0>, + <&tlmm 93 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK0", + "CAM_RESET0"; + sensor-position = <0>; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + eeprom_rear_aux: qcom,eeprom1 { + cell-index = <1>; + compatible = "qcom,eeprom"; + cam_vdig-supply = <&pm8009_l2>; + cam_vio-supply = <&pm8009_l7>; + cam_vana-supply = <&pm8009_l6>; + cam_clk-supply = <&titan_top_gdsc>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2800000 1200000 0 2856000>; + rgltr-max-voltage = <1800000 3000000 1200000 0 3104000>; + rgltr-load-current = <120000 80000 1200000 0 100000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk1_active + &cam_sensor_active_rear_aux>; + pinctrl-1 = <&cam_sensor_mclk1_suspend + &cam_sensor_suspend_rear_aux>; + gpios = <&tlmm 95 0>, + <&tlmm 92 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK1", + "CAM_RESET1"; + sensor-position = <0>; + sensor-mode = <0>; + cci-master = <1>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + eeprom_triple_wide: qcom,eeprom4 { + cell-index = <4>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&pm8009_l7>; + cam_vana-supply = <&pm8009_l5>; + cam_vdig-supply = <&pm8009_l1>; + cam_clk-supply = <&titan_top_gdsc>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2800000 1104000 0 2856000>; + rgltr-max-voltage = <1800000 3000000 1104000 0 3104000>; + rgltr-load-current = <120000 80000 1200000 0 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active + &cam_sensor_active_rear>; + pinctrl-1 = <&cam_sensor_mclk0_suspend + &cam_sensor_suspend_rear>; + gpios = <&tlmm 94 0>, + <&tlmm 93 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK0", + "CAM_RESET0"; + sensor-position = <0>; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + eeprom_triple_tele: qcom,eeprom5 { + cell-index = <5>; + compatible = "qcom,eeprom"; + cam_vdig-supply = <&pm8009_l2>; + cam_vio-supply = <&pm8009_l7>; + cam_vana-supply = <&pm8009_l6>; + cam_clk-supply = <&titan_top_gdsc>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2800000 1200000 0 2856000>; + rgltr-max-voltage = <1800000 3000000 1200000 0 3104000>; + rgltr-load-current = <120000 80000 1200000 0 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk1_active + &cam_sensor_active_rear_aux>; + pinctrl-1 = <&cam_sensor_mclk1_suspend + &cam_sensor_suspend_rear_aux>; + gpios = <&tlmm 95 0>, + <&tlmm 92 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK1", + "CAM_RESET1"; + sensor-position = <0>; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + eeprom_triple_uw: qcom,eeprom6 { + cell-index = <6>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&pm8009_l7>; + cam_vana-supply = <&pm8009_l6>; + cam_vdig-supply = <&pm8009_l3>; + cam_clk-supply = <&titan_top_gdsc>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2800000 1056000 0 2856000>; + rgltr-max-voltage = <1800000 3000000 1056000 0 3104000>; + rgltr-load-current = <120000 80000 1200000 0 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk2_active + &cam_sensor_active_rst2>; + pinctrl-1 = <&cam_sensor_mclk2_suspend + &cam_sensor_suspend_rst2>; + gpios = <&tlmm 96 0>, + <&tlmm 78 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK2", + "CAM_RESET2"; + sensor-position = <1>; + sensor-mode = <0>; + cci-master = <1>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor0 { + cell-index = <0>; + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <0>; + sensor-position-roll = <90>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + actuator-src = <&actuator_rear>; + led-flash-src = <&led_flash_rear>; + eeprom-src = <&eeprom_rear>; + cam_vio-supply = <&pm8009_l7>; + cam_bob-supply = <&pm8150a_bob>; + cam_vana-supply = <&pm8009_l5>; + cam_vdig-supply = <&pm8009_l1>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_bob"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1104000 0 3008000>; + rgltr-max-voltage = <1800000 3000000 1104000 0 3960000>; + rgltr-load-current = <120000 80000 1200000 0 2000000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active + &cam_sensor_active_rear>; + pinctrl-1 = <&cam_sensor_mclk0_suspend + &cam_sensor_suspend_rear>; + gpios = <&tlmm 94 0>, + <&tlmm 93 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK0", + "CAM_RESET0"; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor1 { + cell-index = <1>; + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <1>; + sensor-position-roll = <90>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + eeprom-src = <&eeprom_rear_aux>; + led-flash-src = <&led_flash_rear_aux>; + actuator-src = <&actuator_rear_aux>; + cam_bob-supply = <&pm8150a_bob>; + cam_vdig-supply = <&pm8009_l2>; + cam_vio-supply = <&pm8009_l7>; + cam_vana-supply = <&pm8009_l6>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_bob"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>; + rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>; + rgltr-load-current = <120000 80000 1200000 0 2000000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk1_active + &cam_sensor_active_rear_aux>; + pinctrl-1 = <&cam_sensor_mclk1_suspend + &cam_sensor_suspend_rear_aux>; + gpios = <&tlmm 95 0>, + <&tlmm 92 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK1", + "CAM_RESET1"; + sensor-mode = <0>; + cci-master = <1>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK1_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor4 { + cell-index = <4>; + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <0>; + sensor-position-roll = <90>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + actuator-src = <&actuator_triple_wide>; + led-flash-src = <&led_flash_triple_rear>; + eeprom-src = <&eeprom_triple_wide>; + cam_vio-supply = <&pm8009_l7>; + cam_bob-supply = <&pm8150a_bob>; + cam_vana-supply = <&pm8009_l5>; + cam_vdig-supply = <&pm8009_l1>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_bob"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1104000 0 3008000>; + rgltr-max-voltage = <1800000 3000000 1104000 0 3960000>; + rgltr-load-current = <120000 80000 1200000 0 2000000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active + &cam_sensor_active_rear>; + pinctrl-1 = <&cam_sensor_mclk0_suspend + &cam_sensor_suspend_rear>; + gpios = <&tlmm 94 0>, + <&tlmm 93 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK0", + "CAM_RESET0"; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor5 { + cell-index = <5>; + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <1>; + sensor-position-roll = <90>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + eeprom-src = <&eeprom_triple_tele>; + actuator-src = <&actuator_triple_tele>; + led-flash-src = <&led_flash_triple_rear_aux>; + cam_bob-supply = <&pm8150a_bob>; + cam_vdig-supply = <&pm8009_l2>; + cam_vio-supply = <&pm8009_l7>; + cam_vana-supply = <&pm8009_l6>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_bob"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>; + rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>; + rgltr-load-current = <120000 80000 1200000 0 2000000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk1_active + &cam_sensor_active_rear_aux>; + pinctrl-1 = <&cam_sensor_mclk1_suspend + &cam_sensor_suspend_rear_aux>; + gpios = <&tlmm 95 0>, + <&tlmm 92 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK1", + "CAM_RESET1"; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK1_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor6 { + cell-index = <6>; + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <2>; + sensor-position-roll = <270>; + sensor-position-pitch = <0>; + sensor-position-yaw = <0>; + eeprom-src = <&eeprom_triple_uw>; + actuator-src = <&actuator_triple_uw>; + led-flash-src = <&led_flash_triple_rear_aux2>; + cam_vio-supply = <&pm8009_l7>; + cam_bob-supply = <&pm8150a_bob>; + cam_vana-supply = <&pm8009_l6>; + cam_vdig-supply = <&pm8009_l3>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_bob"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1056000 0 3008000>; + rgltr-max-voltage = <1800000 3000000 1056000 0 3960000>; + rgltr-load-current = <120000 80000 1200000 0 2000000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk2_active + &cam_sensor_active_rst2>; + pinctrl-1 = <&cam_sensor_mclk2_suspend + &cam_sensor_suspend_rst2>; + gpios = <&tlmm 96 0>, + <&tlmm 78 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK2", + "CAM_RESET2"; + sensor-mode = <0>; + cci-master = <1>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; +}; + +&cam_cci1 { + eeprom_front: qcom,eeprom2 { + cell-index = <2>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&pm8009_l7>; + cam_vana-supply = <&pm8009_l6>; + cam_vdig-supply = <&pm8009_l3>; + cam_clk-supply = <&titan_top_gdsc>; + cam_vaf-supply = <&pm8150a_l7>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2800000 1056000 0 2856000>; + rgltr-max-voltage = <1800000 3000000 1056000 0 3104000>; + rgltr-load-current = <120000 80000 1200000 0 100000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk2_active + &cam_sensor_active_rst2>; + pinctrl-1 = <&cam_sensor_mclk2_suspend + &cam_sensor_suspend_rst2>; + gpios = <&tlmm 96 0>, + <&tlmm 78 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK2", + "CAM_RESET2"; + sensor-position = <1>; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + eeprom_tof: qcom,eeprom3 { + cell-index = <3>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&pm8009_l7>; + cam_vdig-supply = <&vreg_tof>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vdig", + "cam_clk"; + rgltr-cntrl-support; + rgltr-min-voltage = <0 3600000 0>; + rgltr-max-voltage = <0 3600000 0>; + rgltr-load-current = <180000 120000 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk3_active + &cam_sensor_active_3>; + pinctrl-1 = <&cam_sensor_mclk3_suspend + &cam_sensor_suspend_3>; + gpios = <&tlmm 97 0>, + <&tlmm 109 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK3", + "CAM_RESET3"; + sensor-position = <1>; + sensor-mode = <0>; + cci-master = <1>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK3_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor2 { + cell-index = <2>; + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <2>; + sensor-position-roll = <270>; + sensor-position-pitch = <0>; + sensor-position-yaw = <0>; + eeprom-src = <&eeprom_front>; + cam_vio-supply = <&pm8009_l7>; + cam_bob-supply = <&pm8150a_bob>; + cam_vana-supply = <&pm8009_l6>; + cam_vdig-supply = <&pm8009_l3>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_bob"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1056000 0 3008000>; + rgltr-max-voltage = <1800000 3000000 1056000 0 3960000>; + rgltr-load-current = <120000 80000 1200000 0 2000000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk2_active + &cam_sensor_active_rst2>; + pinctrl-1 = <&cam_sensor_mclk2_suspend + &cam_sensor_suspend_rst2>; + gpios = <&tlmm 96 0>, + <&tlmm 78 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK2", + "CAM_RESET2"; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor3 { + cell-index = <3>; + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <3>; + eeprom-src = <&eeprom_tof>; + sensor-position-roll = <270>; + sensor-position-pitch = <0>; + sensor-position-yaw = <0>; + cam_vio-supply = <&pm8009_l7>; + cam_vdig-supply = <&vreg_tof>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vdig", + "cam_clk"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 3600000 0>; + rgltr-max-voltage = <1800000 3600000 0>; + rgltr-load-current = <180000 120000 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk3_active + &cam_sensor_active_3>; + pinctrl-1 = <&cam_sensor_mclk3_suspend + &cam_sensor_suspend_3>; + gpios = <&tlmm 97 0>, + <&tlmm 109 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK3", + "CAM_RESET3"; + sensor-mode = <0>; + cci-master = <1>; + status = "ok"; + clocks = <&clock_camcc CAM_CC_MCLK3_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; +}; + diff --git a/arch/arm64/boot/dts/vendor/qcom/camera/kona-camera.dtsi b/arch/arm64/boot/dts/vendor/qcom/camera/kona-camera.dtsi new file mode 100644 index 000000000000..464dfdf35b9b --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/camera/kona-camera.dtsi @@ -0,0 +1,1706 @@ +#include <dt-bindings/msm/msm-camera.h> + +&soc { + qcom,cam-req-mgr { + compatible = "qcom,cam-req-mgr"; + status = "ok"; + }; + + cam_csiphy0: qcom,csiphy@ac6a000 { + cell-index = <0>; + compatible = "qcom,csiphy-v1.2.1", "qcom,csiphy"; + reg = <0x0ac6a000 0x2000>; + reg-names = "csiphy"; + reg-cam-base = <0x6a000>; + interrupts = <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "csiphy"; + gdscr-supply = <&titan_top_gdsc>; + refgen-supply = <&refgen>; + regulator-names = "gdscr", "refgen"; + csi-vdd-voltage = <1200000>; + mipi-csi-vdd-supply = <&pm8150_l9>; + clocks = <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY0_CLK>, + <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>; + clock-names = "cphy_rx_clk_src", + "csiphy0_clk", + "csi0phytimer_clk_src", + "csi0phytimer_clk"; + src-clock-name = "csi0phytimer_clk_src"; + clock-cntl-level = "turbo"; + clock-rates = + <400000000 0 300000000 0>; + status = "ok"; + }; + + cam_csiphy1: qcom,csiphy@ac6c000 { + cell-index = <1>; + compatible = "qcom,csiphy-v1.2.1", "qcom,csiphy"; + reg = <0xac6c000 0x2000>; + reg-names = "csiphy"; + reg-cam-base = <0x6c000>; + interrupts = <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "csiphy"; + gdscr-supply = <&titan_top_gdsc>; + refgen-supply = <&refgen>; + regulator-names = "gdscr", "refgen"; + csi-vdd-voltage = <1200000>; + mipi-csi-vdd-supply = <&pm8150_l9>; + clocks = <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY1_CLK>, + <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>; + clock-names = "cphy_rx_clk_src", + "csiphy1_clk", + "csi1phytimer_clk_src", + "csi1phytimer_clk"; + src-clock-name = "csi1phytimer_clk_src"; + clock-cntl-level = "turbo"; + clock-rates = + <400000000 0 300000000 0>; + + status = "ok"; + }; + + cam_csiphy2: qcom,csiphy@ac6e000 { + cell-index = <2>; + compatible = "qcom,csiphy-v1.2.1", "qcom,csiphy"; + reg = <0xac6e000 0x2000>; + reg-names = "csiphy"; + reg-cam-base = <0x6e000>; + interrupts = <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "csiphy"; + gdscr-supply = <&titan_top_gdsc>; + refgen-supply = <&refgen>; + regulator-names = "gdscr", "refgen"; + csi-vdd-voltage = <1200000>; + mipi-csi-vdd-supply = <&pm8150_l9>; + clocks = <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY2_CLK>, + <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>; + clock-names = "cphy_rx_clk_src", + "csiphy2_clk", + "csi2phytimer_clk_src", + "csi2phytimer_clk"; + src-clock-name = "csi2phytimer_clk_src"; + clock-cntl-level = "turbo"; + clock-rates = + <400000000 0 300000000 0>; + status = "ok"; + }; + + cam_csiphy3: qcom,csiphy@ac70000 { + cell-index = <3>; + compatible = "qcom,csiphy-v1.2.1", "qcom,csiphy"; + reg = <0xac70000 0x2000>; + reg-names = "csiphy"; + reg-cam-base = <0x70000>; + interrupts = <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "csiphy"; + gdscr-supply = <&titan_top_gdsc>; + refgen-supply = <&refgen>; + regulator-names = "gdscr", "refgen"; + csi-vdd-voltage = <1200000>; + mipi-csi-vdd-supply = <&pm8150_l9>; + clocks = <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY3_CLK>, + <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>; + clock-names = "cphy_rx_clk_src", + "csiphy3_clk", + "csi3phytimer_clk_src", + "csi3phytimer_clk"; + src-clock-name = "csi3phytimer_clk_src"; + clock-cntl-level = "turbo"; + clock-rates = + <400000000 0 300000000 0>; + status = "ok"; + }; + + cam_csiphy4: qcom,csiphy@ac72000 { + cell-index = <4>; + compatible = "qcom,csiphy-v1.2.1", "qcom,csiphy"; + reg = <0xac72000 0x2000>; + reg-names = "csiphy"; + reg-cam-base = <0x72000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "csiphy"; + gdscr-supply = <&titan_top_gdsc>; + refgen-supply = <&refgen>; + regulator-names = "gdscr", "refgen"; + csi-vdd-voltage = <1200000>; + mipi-csi-vdd-supply = <&pm8150_l9>; + clocks = <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY4_CLK>, + <&clock_camcc CAM_CC_CSI4PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSI4PHYTIMER_CLK>; + clock-names = "cphy_rx_clk_src", + "csiphy4_clk", + "csi4phytimer_clk_src", + "csi4phytimer_clk"; + src-clock-name = "csi4phytimer_clk_src"; + clock-cntl-level = "turbo"; + clock-rates = + <400000000 0 300000000 0>; + status = "ok"; + }; + + cam_csiphy5: qcom,csiphy@ac74000 { + cell-index = <5>; + compatible = "qcom,csiphy-v1.2.1", "qcom,csiphy"; + reg = <0xac74000 0x2000>; + reg-names = "csiphy"; + reg-cam-base = <0x74000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "csiphy"; + gdscr-supply = <&titan_top_gdsc>; + refgen-supply = <&refgen>; + regulator-names = "gdscr", "refgen"; + csi-vdd-voltage = <1200000>; + mipi-csi-vdd-supply = <&pm8150_l9>; + clocks = <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY5_CLK>, + <&clock_camcc CAM_CC_CSI5PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSI5PHYTIMER_CLK>; + clock-names = "cphy_rx_clk_src", + "csiphy5_clk", + "csi5phytimer_clk_src", + "csi5phytimer_clk"; + src-clock-name = "csi5phytimer_clk_src"; + clock-cntl-level = "turbo"; + clock-rates = + <400000000 0 300000000 0>; + status = "ok"; + }; + + cam_cci0: qcom,cci@ac4f000 { + cell-index = <0>; + compatible = "qcom,cci"; + reg = <0xac4f000 0x1000>; + reg-names = "cci"; + reg-cam-base = <0x4f000>; + interrupt-names = "cci"; + interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>; + status = "ok"; + gdscr-supply = <&titan_top_gdsc>; + regulator-names = "gdscr"; + clocks = <&clock_camcc CAM_CC_CCI_0_CLK_SRC>, + <&clock_camcc CAM_CC_CCI_0_CLK>; + clock-names = "cci_0_clk_src", + "cci_0_clk"; + src-clock-name = "cci_0_clk_src"; + clock-cntl-level = "lowsvs"; + clock-rates = <37500000 0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cci0_active &cci1_active>; + pinctrl-1 = <&cci0_suspend &cci1_suspend>; + gpios = <&tlmm 101 0>, + <&tlmm 102 0>, + <&tlmm 103 0>, + <&tlmm 104 0>; + gpio-req-tbl-num = <0 1 2 3>; + gpio-req-tbl-flags = <1 1 1 1>; + gpio-req-tbl-label = "CCI_I2C_DATA0", + "CCI_I2C_CLK0", + "CCI_I2C_DATA1", + "CCI_I2C_CLK1"; + + i2c_freq_100Khz_cci0: qcom,i2c_standard_mode { + hw-thigh = <201>; + hw-tlow = <174>; + hw-tsu-sto = <204>; + hw-tsu-sta = <231>; + hw-thd-dat = <22>; + hw-thd-sta = <162>; + hw-tbuf = <227>; + hw-scl-stretch-en = <0>; + hw-trdhld = <6>; + hw-tsp = <3>; + cci-clk-src = <37500000>; + status = "ok"; + }; + + i2c_freq_400Khz_cci0: qcom,i2c_fast_mode { + hw-thigh = <38>; + hw-tlow = <56>; + hw-tsu-sto = <40>; + hw-tsu-sta = <40>; + hw-thd-dat = <22>; + hw-thd-sta = <35>; + hw-tbuf = <62>; + hw-scl-stretch-en = <0>; + hw-trdhld = <6>; + hw-tsp = <3>; + cci-clk-src = <37500000>; + status = "ok"; + }; + + i2c_freq_custom_cci0: qcom,i2c_custom_mode { + hw-thigh = <38>; + hw-tlow = <56>; + hw-tsu-sto = <40>; + hw-tsu-sta = <40>; + hw-thd-dat = <22>; + hw-thd-sta = <35>; + hw-tbuf = <62>; + hw-scl-stretch-en = <1>; + hw-trdhld = <6>; + hw-tsp = <3>; + cci-clk-src = <37500000>; + status = "ok"; + }; + + i2c_freq_1Mhz_cci0: qcom,i2c_fast_plus_mode { + hw-thigh = <16>; + hw-tlow = <22>; + hw-tsu-sto = <17>; + hw-tsu-sta = <18>; + hw-thd-dat = <16>; + hw-thd-sta = <15>; + hw-tbuf = <24>; + hw-scl-stretch-en = <0>; + hw-trdhld = <3>; + hw-tsp = <3>; + cci-clk-src = <37500000>; + status = "ok"; + }; + }; + + cam_cci1: qcom,cci@ac50000 { + cell-index = <1>; + compatible = "qcom,cci"; + reg = <0xac50000 0x1000>; + reg-names = "cci"; + reg-cam-base = <0x50000>; + interrupt-names = "cci"; + interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>; + status = "ok"; + gdscr-supply = <&titan_top_gdsc>; + regulator-names = "gdscr"; + clocks = <&clock_camcc CAM_CC_CCI_1_CLK_SRC>, + <&clock_camcc CAM_CC_CCI_1_CLK>; + clock-names = "cci_1_clk_src", + "cci_1_clk"; + src-clock-name = "cci_1_clk_src"; + clock-cntl-level = "lowsvs"; + clock-rates = <37500000 0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cci2_active &cci3_active>; + pinctrl-1 = <&cci2_suspend &cci3_suspend>; + gpios = <&tlmm 105 0>, + <&tlmm 106 0>, + <&tlmm 107 0>, + <&tlmm 108 0>; + gpio-req-tbl-num = <0 1 2 3>; + gpio-req-tbl-flags = <1 1 1 1>; + gpio-req-tbl-label = "CCI_I2C_DATA2", + "CCI_I2C_CLK2", + "CCI_I2C_DATA3", + "CCI_I2C_CLK3"; + + i2c_freq_100Khz_cci1: qcom,i2c_standard_mode { + hw-thigh = <201>; + hw-tlow = <174>; + hw-tsu-sto = <204>; + hw-tsu-sta = <231>; + hw-thd-dat = <22>; + hw-thd-sta = <162>; + hw-tbuf = <227>; + hw-scl-stretch-en = <0>; + hw-trdhld = <6>; + hw-tsp = <3>; + cci-clk-src = <37500000>; + status = "ok"; + }; + + i2c_freq_400Khz_cci1: qcom,i2c_fast_mode { + hw-thigh = <38>; + hw-tlow = <56>; + hw-tsu-sto = <40>; + hw-tsu-sta = <40>; + hw-thd-dat = <22>; + hw-thd-sta = <35>; + hw-tbuf = <62>; + hw-scl-stretch-en = <0>; + hw-trdhld = <6>; + hw-tsp = <3>; + cci-clk-src = <37500000>; + status = "ok"; + }; + + i2c_freq_custom_cci1: qcom,i2c_custom_mode { + hw-thigh = <38>; + hw-tlow = <56>; + hw-tsu-sto = <40>; + hw-tsu-sta = <40>; + hw-thd-dat = <22>; + hw-thd-sta = <35>; + hw-tbuf = <62>; + hw-scl-stretch-en = <1>; + hw-trdhld = <6>; + hw-tsp = <3>; + cci-clk-src = <37500000>; + status = "ok"; + }; + + i2c_freq_1Mhz_cci1: qcom,i2c_fast_plus_mode { + hw-thigh = <16>; + hw-tlow = <22>; + hw-tsu-sto = <17>; + hw-tsu-sta = <18>; + hw-thd-dat = <16>; + hw-thd-sta = <15>; + hw-tbuf = <24>; + hw-scl-stretch-en = <0>; + hw-trdhld = <3>; + hw-tsp = <3>; + cci-clk-src = <37500000>; + status = "ok"; + }; + }; + + qcom,cam_smmu { + compatible = "qcom,msm-cam-smmu"; + status = "ok"; + + msm_cam_smmu_ife { + compatible = "qcom,msm-cam-smmu-cb"; + iommus = <&apps_smmu 0x800 0x400>, + <&apps_smmu 0x801 0x400>, + <&apps_smmu 0x840 0x400>, + <&apps_smmu 0x841 0x400>, + <&apps_smmu 0xC00 0x400>, + <&apps_smmu 0xC01 0x400>, + <&apps_smmu 0xC40 0x400>, + <&apps_smmu 0xC41 0x400>; + qcom,iommu-dma-addr-pool = <0x7400000 0xd8c00000>; + label = "ife"; + ife_iova_mem_map: iova-mem-map { + /* IO region is approximately 3.4 GB */ + iova-mem-region-io { + iova-region-name = "io"; + iova-region-start = <0x7400000>; + iova-region-len = <0xd8c00000>; + iova-region-id = <0x3>; + status = "ok"; + }; + }; + }; + + msm_cam_smmu_jpeg { + compatible = "qcom,msm-cam-smmu-cb"; + iommus = <&apps_smmu 0x2040 0x400>, + <&apps_smmu 0x2440 0x400>; + label = "jpeg"; + qcom,iommu-dma-addr-pool = <0x7400000 0xd8c00000>; + jpeg_iova_mem_map: iova-mem-map { + /* IO region is approximately 3.4 GB */ + iova-mem-region-io { + iova-region-name = "io"; + iova-region-start = <0x7400000>; + iova-region-len = <0xd8c00000>; + iova-region-id = <0x3>; + status = "ok"; + }; + }; + }; + + msm_cam_icp_fw { + compatible = "qcom,msm-cam-smmu-fw-dev"; + label="icp"; + memory-region = <&pil_camera_mem>; + }; + + msm_cam_smmu_icp { + compatible = "qcom,msm-cam-smmu-cb"; + iommus = <&apps_smmu 0x20E2 0x400>, + <&apps_smmu 0x24E2 0x400>, + <&apps_smmu 0x2000 0x400>, + <&apps_smmu 0x2001 0x400>, + <&apps_smmu 0x2400 0x400>, + <&apps_smmu 0x2401 0x400>, + <&apps_smmu 0x2060 0x400>, + <&apps_smmu 0x2061 0x400>, + <&apps_smmu 0x2460 0x400>, + <&apps_smmu 0x2461 0x400>, + <&apps_smmu 0x2020 0x400>, + <&apps_smmu 0x2021 0x400>, + <&apps_smmu 0x2420 0x400>, + <&apps_smmu 0x2421 0x400>; + label = "icp"; + qcom,iommu-dma-addr-pool = <0x10c00000 0xcf300000>; + icp_iova_mem_map: iova-mem-map { + iova-mem-region-firmware { + /* Firmware region is 5MB */ + iova-region-name = "firmware"; + iova-region-start = <0x0>; + iova-region-len = <0x500000>; + iova-region-id = <0x0>; + status = "ok"; + }; + + iova-mem-region-shared { + /* Shared region is 150MB long */ + iova-region-name = "shared"; + iova-region-start = <0x7400000>; + iova-region-len = <0x9600000>; + iova-region-id = <0x1>; + status = "ok"; + }; + + iova-mem-region-secondary-heap { + /* Secondary heap region is 1MB long */ + iova-region-name = "secheap"; + iova-region-start = <0x10a00000>; + iova-region-len = <0x100000>; + iova-region-id = <0x4>; + status = "ok"; + }; + + iova-mem-region-io { + /* IO region is approximately 3.3 GB */ + iova-region-name = "io"; + iova-region-start = <0x10c00000>; + iova-region-len = <0xcf300000>; + iova-region-id = <0x3>; + status = "ok"; + }; + + iova-mem-qdss-region { + /* QDSS region is appropriate 1MB */ + iova-region-name = "qdss"; + iova-region-start = <0x10b00000>; + iova-region-len = <0x100000>; + iova-region-id = <0x5>; + qdss-phy-addr = <0x16790000>; + status = "ok"; + }; + }; + }; + + msm_cam_smmu_cpas_cdm { + compatible = "qcom,msm-cam-smmu-cb"; + iommus = <&apps_smmu 0x20C0 0x400>, + <&apps_smmu 0x24C0 0x400>; + label = "cpas-cdm0"; + qcom,iommu-dma-addr-pool = <0x7400000 0xd8c00000>; + cpas_cdm_iova_mem_map: iova-mem-map { + iova-mem-region-io { + /* IO region is approximately 3.4 GB */ + iova-region-name = "io"; + iova-region-start = <0x7400000>; + iova-region-len = <0xd8c00000>; + iova-region-id = <0x3>; + status = "ok"; + }; + }; + }; + + msm_cam_smmu_secure { + compatible = "qcom,msm-cam-smmu-cb"; + label = "cam-secure"; + qcom,secure-cb; + }; + + msm_cam_smmu_fd { + compatible = "qcom,msm-cam-smmu-cb"; + iommus = <&apps_smmu 0x2080 0x400>, + <&apps_smmu 0x2480 0x400>; + qcom,iommu-dma-addr-pool = <0x7400000 0xd8c00000>; + label = "fd"; + fd_iova_mem_map: iova-mem-map { + iova-mem-region-io { + /* IO region is approximately 3.4 GB */ + iova-region-name = "io"; + iova-region-start = <0x7400000>; + iova-region-len = <0xd8c00000>; + iova-region-id = <0x3>; + status = "ok"; + }; + }; + }; + }; + + qcom,cam-cpas@ac40000 { + cell-index = <0>; + compatible = "qcom,cam-cpas"; + label = "cpas"; + arch-compat = "cpas_top"; + status = "ok"; + reg-names = "cam_cpas_top", "cam_camnoc"; + reg = <0xac40000 0x1000>, + <0xac42000 0x8000>; + reg-cam-base = <0x40000 0x42000>; + interrupt-names = "cpas_camnoc"; + interrupts = <GIC_SPI 459 IRQ_TYPE_EDGE_RISING>; + camnoc-axi-min-ib-bw = <3000000000>; + regulator-names = "camss-vdd"; + camss-vdd-supply = <&titan_top_gdsc>; + clock-names = + "gcc_ahb_clk", + "gcc_axi_hf_clk", + "gcc_axi_sf_clk", + "slow_ahb_clk_src", + "cpas_ahb_clk", + "cpas_core_ahb_clk", + "camnoc_axi_clk_src", + "camnoc_axi_clk"; + clocks = + <&clock_gcc GCC_CAMERA_AHB_CLK>, + <&clock_gcc GCC_CAMERA_HF_AXI_CLK>, + <&clock_gcc GCC_CAMERA_SF_AXI_CLK>, + <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&clock_camcc CAM_CC_CPAS_AHB_CLK>, + <&clock_camcc CAM_CC_CORE_AHB_CLK>, + <&clock_camcc CAM_CC_CAMNOC_AXI_CLK_SRC>, + <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>; + src-clock-name = "camnoc_axi_clk_src"; + clock-rates = + <0 0 0 0 0 0 0 0>, + <0 0 0 19200000 0 0 19200000 0>, + <0 0 0 80000000 0 0 300000000 0>, + <0 0 0 80000000 0 0 400000000 0>, + <0 0 0 80000000 0 0 400000000 0>, + <0 0 0 80000000 0 0 400000000 0>, + <0 0 0 80000000 0 0 400000000 0>, + <0 0 0 80000000 0 0 480000000 0>; + clock-cntl-level = "suspend", "minsvs", "lowsvs", "svs", + "svs_l1", "nominal", "nominal_l1", "turbo"; + control-camnoc-axi-clk; + camnoc-bus-width = <32>; + camnoc-axi-clk-bw-margin-perc = <20>; + qcom,msm-bus,name = "cam_ahb"; + qcom,msm-bus,num-cases = <8>; + qcom,msm-bus,num-paths = <1>; + qcom,msm-bus,vectors-KBps = + <MSM_BUS_MASTER_AMPSS_M0 + MSM_BUS_SLAVE_CAMERA_CFG 0 0>, + <MSM_BUS_MASTER_AMPSS_M0 + MSM_BUS_SLAVE_CAMERA_CFG 0 76800>, + <MSM_BUS_MASTER_AMPSS_M0 + MSM_BUS_SLAVE_CAMERA_CFG 0 76800>, + <MSM_BUS_MASTER_AMPSS_M0 + MSM_BUS_SLAVE_CAMERA_CFG 0 150000>, + <MSM_BUS_MASTER_AMPSS_M0 + MSM_BUS_SLAVE_CAMERA_CFG 0 150000>, + <MSM_BUS_MASTER_AMPSS_M0 + MSM_BUS_SLAVE_CAMERA_CFG 0 300000>, + <MSM_BUS_MASTER_AMPSS_M0 + MSM_BUS_SLAVE_CAMERA_CFG 0 300000>, + <MSM_BUS_MASTER_AMPSS_M0 + MSM_BUS_SLAVE_CAMERA_CFG 0 300000>; + vdd-corners = <RPMH_REGULATOR_LEVEL_RETENTION + RPMH_REGULATOR_LEVEL_MIN_SVS + RPMH_REGULATOR_LEVEL_LOW_SVS + RPMH_REGULATOR_LEVEL_SVS + RPMH_REGULATOR_LEVEL_SVS_L1 + RPMH_REGULATOR_LEVEL_NOM + RPMH_REGULATOR_LEVEL_NOM_L1 + RPMH_REGULATOR_LEVEL_NOM_L2 + RPMH_REGULATOR_LEVEL_TURBO + RPMH_REGULATOR_LEVEL_TURBO_L1>; + vdd-corner-ahb-mapping = "suspend", "minsvs", + "lowsvs", "svs", "svs_l1", + "nominal", "nominal", "nominal", + "turbo", "turbo"; + client-id-based; + client-names = + "csiphy0", "csiphy1", "csiphy2", "csiphy3", + "csiphy4", "csiphy5", "cci0", "cci1", + "csid0", "csid1", "csid2", "csid3", + "csid4", "csid5", "csid6", "ife0", + "ife1", "ife2", "ife3", "custom0", + "ipe0", "cam-cdm-intf0", "cpas-cdm0", + "bps0", "icp0", "jpeg-dma0", "jpeg-enc0", + "fd0"; + + camera-bus-nodes { + level3-nodes { + level-index = <3>; + level3_rt0_rd_wr_sum: level3-rt0-rd-wr-sum { + cell-index = <0>; + node-name = "level3-rt0-rd-wr-sum"; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM>; + qcom,axi-port-name = "cam_hf_0"; + ib-bw-voting-needed; + qcom,axi-port-mnoc { + qcom,msm-bus,name = + "cam_hf_0_mnoc"; + qcom,msm-bus-vector-dyn-vote; + qcom,msm-bus,num-cases = <2>; + qcom,msm-bus,num-paths = <1>; + qcom,msm-bus,vectors-KBps = + <MSM_BUS_MASTER_CAMNOC_HF + MSM_BUS_SLAVE_EBI_CH0 0 0>, + <MSM_BUS_MASTER_CAMNOC_HF + MSM_BUS_SLAVE_EBI_CH0 0 0>; + }; + }; + + level3_nrt0_rd_wr_sum: level3-nrt0-rd-wr-sum { + cell-index = <1>; + node-name = "level3-nrt0-rd-wr-sum"; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM>; + qcom,axi-port-name = "cam_sf_0"; + qcom,axi-port-mnoc { + qcom,msm-bus,name = + "cam_sf_0_mnoc"; + qcom,msm-bus-vector-dyn-vote; + qcom,msm-bus,num-cases = <2>; + qcom,msm-bus,num-paths = <1>; + qcom,msm-bus,vectors-KBps = + <MSM_BUS_MASTER_CAMNOC_SF + MSM_BUS_SLAVE_EBI_CH0 0 0>, + <MSM_BUS_MASTER_CAMNOC_SF + MSM_BUS_SLAVE_EBI_CH0 0 0>; + }; + }; + + level3_nrt1_rd_wr_sum: level3-nrt1-rd-wr-sum { + cell-index = <2>; + node-name = "level3-nrt1-rd-wr-sum"; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM>; + qcom,axi-port-name = "cam_sf_icp"; + qcom,axi-port-mnoc { + qcom,msm-bus,name = + "cam_sf_icp_mnoc"; + qcom,msm-bus-vector-dyn-vote; + qcom,msm-bus,num-cases = <2>; + qcom,msm-bus,num-paths = <1>; + qcom,msm-bus,vectors-KBps = + <MSM_BUS_MASTER_CAMNOC_ICP + MSM_BUS_SLAVE_EBI_CH0 0 0>, + <MSM_BUS_MASTER_CAMNOC_ICP + MSM_BUS_SLAVE_EBI_CH0 0 0>; + }; + }; + }; + + level2-nodes { + level-index = <2>; + camnoc-max-needed; + level2_rt0_wr: level2-rt0-wr { + cell-index = <3>; + node-name = "level2-rt0-wr"; + parent-node = <&level3_rt0_rd_wr_sum>; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM_INTERLEAVE>; + }; + + level2_rt0_rd: level2-rt0-rd { + cell-index = <4>; + node-name = "level2-rt0-rd"; + parent-node = <&level3_rt0_rd_wr_sum>; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM_INTERLEAVE>; + }; + + level2_nrt0_wr: level2-nrt0-wr { + cell-index = <5>; + node-name = "level2-nrt0-wr"; + parent-node = <&level3_nrt0_rd_wr_sum>; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM_INTERLEAVE>; + }; + + level2_nrt0_rd: level2-nrt0-rd { + cell-index = <6>; + node-name = "level2-nrt0-rd"; + parent-node = <&level3_nrt0_rd_wr_sum>; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM_INTERLEAVE>; + }; + + level2_nrt1_rd: level2-nrt1-rd { + cell-index = <7>; + node-name = "level2-nrt1-rd"; + parent-node = <&level3_nrt1_rd_wr_sum>; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM>; + bus-width-factor = <4>; + }; + }; + + level1-nodes { + level-index = <1>; + camnoc-max-needed; + level1_rt0_wr0: level1-rt0-wr0 { + cell-index = <8>; + node-name = "level1-rt0-wr0"; + parent-node = <&level2_rt0_wr>; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM>; + }; + + level1_rt0_wr1: level1-rt0-wr1 { + cell-index = <9>; + node-name = "level1-rt0-wr1"; + parent-node = <&level2_rt0_wr>; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM>; + }; + + level1_rt0_rd0: level1-rt0-rd0 { + cell-index = <10>; + node-name = "level1-rt0-rd0"; + parent-node = <&level2_rt0_rd>; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM>; + }; + + level1_rt0_wr2: level1-rt0-wr2 { + cell-index = <11>; + node-name = "level1-rt0-wr2"; + parent-node = <&level2_rt0_wr>; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM>; + }; + + level1_nrt0_wr0: level1-nrt0-wr0 { + cell-index = <12>; + node-name = "level1-nrt0-wr0"; + parent-node = <&level2_nrt0_wr>; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM>; + }; + + level1_nrt0_rd0: level1-nrt0-rd0 { + cell-index = <13>; + node-name = "level1-nrt0-rd0"; + parent-node = <&level2_nrt0_rd>; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM>; + }; + + level1_nrt0_wr1: level1-nrt0-wr1 { + cell-index = <14>; + node-name = "level1-nrt0-wr1"; + parent-node = <&level2_nrt0_wr>; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM>; + }; + + level1_nrt0_rd2: level1-nrt0-rd2 { + cell-index = <15>; + node-name = "level1-nrt0-rd2"; + parent-node = <&level2_nrt0_rd>; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM>; + }; + }; + + level0-nodes { + level-index = <0>; + ife0_ubwc_stats_wr: ife0-ubwc-stats-wr { + cell-index = <16>; + node-name = "ife0-ubwc-stats-wr"; + client-name = "ife0"; + traffic-data = + <CAM_CPAS_PATH_DATA_IFE_UBWC_STATS>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_WRITE>; + constituent-paths = + <CAM_CPAS_PATH_DATA_IFE_VID + CAM_CPAS_PATH_DATA_IFE_DISP + CAM_CPAS_PATH_DATA_IFE_STATS>; + parent-node = <&level1_rt0_wr0>; + }; + + ife1_ubwc_stats_wr: ife1-ubwc-stats-wr { + cell-index = <17>; + node-name = "ife1-ubwc-stats-wr"; + client-name = "ife1"; + traffic-data = + <CAM_CPAS_PATH_DATA_IFE_UBWC_STATS>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_WRITE>; + constituent-paths = + <CAM_CPAS_PATH_DATA_IFE_VID + CAM_CPAS_PATH_DATA_IFE_DISP + CAM_CPAS_PATH_DATA_IFE_STATS>; + parent-node = <&level1_rt0_wr0>; + }; + + ife0_linear_pdaf_wr: ife0-linear-pdaf-wr { + cell-index = <18>; + node-name = "ife0-linear-pdaf-wr"; + client-name = "ife0"; + traffic-data = + <CAM_CPAS_PATH_DATA_IFE_LINEAR_PDAF>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_WRITE>; + constituent-paths = + <CAM_CPAS_PATH_DATA_IFE_LINEAR + CAM_CPAS_PATH_DATA_IFE_PDAF>; + parent-node = <&level1_rt0_wr1>; + }; + + ife1_linear_pdaf_wr: ife1-linear-pdaf-wr { + cell-index = <19>; + node-name = "ife1-linear-pdaf-wr"; + client-name = "ife1"; + traffic-data = + <CAM_CPAS_PATH_DATA_IFE_LINEAR_PDAF>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_WRITE>; + constituent-paths = + <CAM_CPAS_PATH_DATA_IFE_LINEAR + CAM_CPAS_PATH_DATA_IFE_PDAF>; + parent-node = <&level1_rt0_wr1>; + }; + + ife2_rdi_all_wr: ife2-rdi-all-wr { + cell-index = <20>; + node-name = "ife2-rdi-all-wr"; + client-name = "ife2"; + traffic-data = + <CAM_CPAS_PATH_DATA_IFE_RDI_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_WRITE>; + constituent-paths = + <CAM_CPAS_PATH_DATA_IFE_RDI0 + CAM_CPAS_PATH_DATA_IFE_RDI1 + CAM_CPAS_PATH_DATA_IFE_RDI2 + CAM_CPAS_PATH_DATA_IFE_RDI3>; + parent-node = <&level1_rt0_wr1>; + }; + + ife3_rdi_all_wr: ife3-rdi-all-wr { + cell-index = <21>; + node-name = "ife3-rdi-all-wr"; + client-name = "ife3"; + traffic-data = + <CAM_CPAS_PATH_DATA_IFE_RDI_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_WRITE>; + constituent-paths = + <CAM_CPAS_PATH_DATA_IFE_RDI0 + CAM_CPAS_PATH_DATA_IFE_RDI1 + CAM_CPAS_PATH_DATA_IFE_RDI2 + CAM_CPAS_PATH_DATA_IFE_RDI3>; + parent-node = <&level1_rt0_wr1>; + }; + + ife0_rdi_all_rd: ife0-rdi-all-rd { + cell-index = <22>; + node-name = "ife0-rdi-all-rd"; + client-name = "ife0"; + traffic-data = + <CAM_CPAS_PATH_DATA_IFE_RDI_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_READ>; + constituent-paths = + <CAM_CPAS_PATH_DATA_IFE_RDI0 + CAM_CPAS_PATH_DATA_IFE_RDI1 + CAM_CPAS_PATH_DATA_IFE_RDI2 + CAM_CPAS_PATH_DATA_IFE_RDI3>; + parent-node = <&level1_rt0_rd0>; + }; + + ife1_rdi_all_rd: ife1-rdi-all-rd { + cell-index = <23>; + node-name = "ife1-rdi-all-rd"; + client-name = "ife1"; + traffic-data = + <CAM_CPAS_PATH_DATA_IFE_RDI_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_READ>; + constituent-paths = + <CAM_CPAS_PATH_DATA_IFE_RDI0 + CAM_CPAS_PATH_DATA_IFE_RDI1 + CAM_CPAS_PATH_DATA_IFE_RDI2 + CAM_CPAS_PATH_DATA_IFE_RDI3>; + parent-node = <&level1_rt0_rd0>; + }; + + custom0_all_rd: custom0-all-rd { + cell-index = <24>; + node-name = "custom0-all-rd"; + client-name = "custom0"; + traffic-data = + <CAM_CPAS_PATH_DATA_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_READ>; + parent-node = <&level1_rt0_rd0>; + }; + + ife0_rdi_pixel_raw_wr: ife0-rdi-pixel-raw-wr { + cell-index = <25>; + node-name = "ife0-rdi-pixel-raw-wr"; + client-name = "ife0"; + traffic-data = + <CAM_CPAS_PATH_DATA_IFE_RDI_PIXEL_RAW>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_WRITE>; + constituent-paths = + <CAM_CPAS_PATH_DATA_IFE_RDI0 + CAM_CPAS_PATH_DATA_IFE_RDI1 + CAM_CPAS_PATH_DATA_IFE_RDI2 + CAM_CPAS_PATH_DATA_IFE_PIXEL_RAW>; + parent-node = <&level1_rt0_wr2>; + }; + + ife1_rdi_pixel_raw_wr: ife1-rdi-pixel-raw-wr { + cell-index = <26>; + node-name = "ife1-rdi-pixel-raw-wr"; + client-name = "ife1"; + traffic-data = + <CAM_CPAS_PATH_DATA_IFE_RDI_PIXEL_RAW>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_WRITE>; + constituent-paths = + <CAM_CPAS_PATH_DATA_IFE_RDI0 + CAM_CPAS_PATH_DATA_IFE_RDI1 + CAM_CPAS_PATH_DATA_IFE_RDI2 + CAM_CPAS_PATH_DATA_IFE_PIXEL_RAW>; + parent-node = <&level1_rt0_wr2>; + }; + + custom0_all_wr: custom0-all-wr { + cell-index = <27>; + node-name = "custom0-all-wr"; + client-name = "custom0"; + traffic-data = <CAM_CPAS_PATH_DATA_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_WRITE>; + parent-node = <&level1_rt0_wr2>; + }; + + ipe0_all_wr: ipe0-all-wr { + cell-index = <28>; + node-name = "ipe0-all-wr"; + client-name = "ipe0"; + traffic-data = <CAM_CPAS_PATH_DATA_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_WRITE>; + constituent-paths = + <CAM_CPAS_PATH_DATA_IPE_WR_VID + CAM_CPAS_PATH_DATA_IPE_WR_DISP + CAM_CPAS_PATH_DATA_IPE_WR_REF>; + parent-node = <&level1_nrt0_wr0>; + }; + + bps0_all_wr: bps0-all-wr { + cell-index = <29>; + node-name = "bps0-all-wr"; + client-name = "bps0"; + traffic-data = <CAM_CPAS_PATH_DATA_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_WRITE>; + parent-node = <&level1_nrt0_wr0>; + }; + + ipe0_ref_rd: ipe0-ref-rd { + cell-index = <30>; + node-name = "ipe0-ref-rd"; + client-name = "ipe0"; + traffic-data = + <CAM_CPAS_PATH_DATA_IPE_RD_REF>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_READ>; + parent-node = <&level1_nrt0_rd0>; + }; + + bps0_all_rd: bps0-all-rd { + cell-index = <31>; + node-name = "bps0-all-rd"; + client-name = "bps0"; + traffic-data = <CAM_CPAS_PATH_DATA_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_READ>; + parent-node = <&level1_nrt0_rd0>; + }; + + ipe0_in_rd: ipe0-in-rd { + cell-index = <32>; + node-name = "ipe0-in-rd"; + client-name = "ipe0"; + traffic-data = + <CAM_CPAS_PATH_DATA_IPE_RD_IN>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_READ>; + parent-node = <&level2_nrt0_rd>; + }; + + jpeg_enc0_all_wr: jpeg-enc0-all-wr { + cell-index = <33>; + node-name = "jpeg-enc0-all-wr"; + client-name = "jpeg-enc0"; + traffic-data = <CAM_CPAS_PATH_DATA_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_WRITE>; + parent-node = <&level1_nrt0_wr1>; + }; + + jpeg_dma0_all_wr: jpeg-dma0-all-wr { + cell-index = <34>; + node-name = "jpeg-dma0-all-wr"; + client-name = "jpeg-dma0"; + traffic-data = <CAM_CPAS_PATH_DATA_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_WRITE>; + parent-node = <&level1_nrt0_wr1>; + }; + + jpeg_enc0_all_rd: jpeg-enc0-all-rd { + cell-index = <35>; + node-name = "jpeg-enc0-all-rd"; + client-name = "jpeg-enc0"; + traffic-data = <CAM_CPAS_PATH_DATA_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_READ>; + parent-node = <&level1_nrt0_rd2>; + }; + + jpeg_dma0_all_rd: jpeg-dma0-all-rd { + cell-index = <36>; + node-name = "jpeg-dma0-all-rd"; + client-name = "jpeg-dma0"; + traffic-data = <CAM_CPAS_PATH_DATA_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_READ>; + parent-node = <&level1_nrt0_rd2>; + }; + + fd0_all_wr: fd0-all-wr { + cell-index = <37>; + node-name = "fd0-all-wr"; + client-name = "fd0"; + traffic-data = <CAM_CPAS_PATH_DATA_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_WRITE>; + parent-node = <&level2_nrt0_wr>; + }; + + fd0_all_rd: fd0-all-rd { + cell-index = <38>; + node-name = "fd0-all-rd"; + client-name = "fd0"; + traffic-data = <CAM_CPAS_PATH_DATA_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_READ>; + parent-node = <&level2_nrt0_rd>; + }; + + cpas_cdm0_all_rd: cpas-cdm0-all-rd { + cell-index = <39>; + node-name = "cpas-cdm0-all-rd"; + client-name = "cpas-cdm0"; + traffic-data = <CAM_CPAS_PATH_DATA_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_READ>; + parent-node = <&level2_nrt0_rd>; + }; + + icp0_all_rd: icp0-all-rd { + cell-index = <40>; + node-name = "icp0-all-rd"; + client-name = "icp0"; + traffic-data = <CAM_CPAS_PATH_DATA_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_READ>; + parent-node = <&level2_nrt1_rd>; + }; + }; + }; + }; + + qcom,cam-cdm-intf { + compatible = "qcom,cam-cdm-intf"; + cell-index = <0>; + label = "cam-cdm-intf"; + num-hw-cdm = <3>; + cdm-client-names = "vfe", + "jpegdma", + "jpegenc", + "fd"; + status = "ok"; + }; + + qcom,cpas-cdm0@ac4d000 { + cell-index = <0>; + compatible = "qcom,cam170-cpas-cdm0"; + label = "cpas-cdm"; + reg = <0xac4d000 0x1000>; + reg-names = "cpas-cdm"; + reg-cam-base = <0x4d000>; + interrupts = <GIC_SPI 461 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "cpas-cdm"; + regulator-names = "camss"; + camss-supply = <&titan_top_gdsc>; + clock-names = "cam_cc_cpas_slow_ahb_clk", + "cam_cc_cpas_ahb_clk"; + clocks = <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&clock_camcc CAM_CC_CPAS_AHB_CLK>; + clock-rates = <0 0>; + clock-cntl-level = "svs"; + cdm-client-names = "ife"; + status = "ok"; + }; + + qcom,cpas-cdm1@acb4200 { + cell-index = <1>; + compatible = "qcom,cam480-cpas-cdm1"; + label = "cpas-cdm"; + reg = <0xacb4200 0x1000>; + reg-names = "cpas-cdm"; + reg-cam-base = <0xb4200>; + interrupts = <GIC_SPI 456 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "cpas-cdm"; + regulator-names = "camss"; + camss-supply = <&titan_top_gdsc>; + clock-names = "cam_cc_cpas_slow_ahb_clk", + "cam_cc_cpas_ahb_clk"; + clocks = <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&clock_camcc CAM_CC_CPAS_AHB_CLK>; + clock-rates = <0 0>; + clock-cntl-level = "svs"; + cdm-client-names = "ife0"; + status = "disabled"; + }; + + qcom,cpas-cdm2@acc3200 { + cell-index = <2>; + compatible = "qcom,cam480-cpas-cdm2"; + label = "cpas-cdm"; + reg = <0xacc3200 0x1000>; + reg-names = "cpas-cdm"; + reg-cam-base = <0xc3200>; + interrupts = <GIC_SPI 287 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "cpas-cdm"; + regulator-names = "camss"; + camss-supply = <&titan_top_gdsc>; + clock-names = "cam_cc_cpas_slow_ahb_clk", + "cam_cc_cpas_ahb_clk"; + clocks = <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&clock_camcc CAM_CC_CPAS_AHB_CLK>; + clock-rates = <0 0>; + clock-cntl-level = "svs"; + cdm-client-names = "ife1"; + status = "disabled"; + }; + + qcom,cam-isp { + compatible = "qcom,cam-isp"; + arch-compat = "ife"; + status = "ok"; + }; + + cam_csid0: qcom,csid0@acb5200 { + cell-index = <0>; + compatible = "qcom,csid480"; + reg-names = "csid"; + reg = <0xacb5200 0x1000>; + reg-cam-base = <0xb5200>; + interrupt-names = "csid"; + interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>; + regulator-names = "camss", "ife0"; + camss-supply = <&titan_top_gdsc>; + ife0-supply = <&ife_0_gdsc>; + clock-names = + "ife_csid_clk_src", + "ife_csid_clk", + "cphy_rx_clk_src", + "ife_cphy_rx_clk", + "ife_clk_src", + "ife_clk", + "ife_0_areg", + "ife_0_ahb", + "ife_axi_clk"; + clocks = + <&clock_camcc CAM_CC_IFE_0_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_0_CSID_CLK>, + <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_0_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_0_CLK>, + <&clock_camcc CAM_CC_IFE_0_AREG_CLK>, + <&clock_camcc CAM_CC_IFE_0_AHB_CLK>, + <&clock_camcc CAM_CC_IFE_0_AXI_CLK>; + clock-rates = + <400000000 0 400000000 0 350000000 0 100000000 0 0>, + <400000000 0 400000000 0 475000000 0 200000000 0 0>, + <400000000 0 400000000 0 576000000 0 300000000 0 0>, + <400000000 0 400000000 0 720000000 0 400000000 0 0>; + clock-cntl-level = "lowsvs", "svs", "svs_l1", "turbo"; + src-clock-name = "ife_csid_clk_src"; + clock-control-debugfs = "true"; + status = "ok"; + }; + + cam_vfe0: qcom,ife0@acb4000 { + cell-index = <0>; + compatible = "qcom,vfe480"; + reg-names = "ife", "cam_camnoc"; + reg = <0xacb4000 0xd000>, + <0xac42000 0x8000>; + reg-cam-base = <0xb4000 0x42000>; + interrupt-names = "ife"; + interrupts = <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>; + regulator-names = "camss", "ife0"; + camss-supply = <&titan_top_gdsc>; + ife0-supply = <&ife_0_gdsc>; + clock-names = + "ife_0_ahb", + "ife_0_areg", + "ife_clk_src", + "ife_clk", + "ife_axi_clk"; + clocks = + <&clock_camcc CAM_CC_IFE_0_AHB_CLK>, + <&clock_camcc CAM_CC_IFE_0_AREG_CLK>, + <&clock_camcc CAM_CC_IFE_0_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_0_CLK>, + <&clock_camcc CAM_CC_IFE_0_AXI_CLK>; + clock-rates = + <0 100000000 350000000 0 0>, + <0 200000000 475000000 0 0>, + <0 300000000 576000000 0 0>, + <0 400000000 720000000 0 0>; + clock-cntl-level = "lowsvs", "svs", "svs_l1", "turbo"; + src-clock-name = "ife_clk_src"; + scl-clk-names = "ife_0_areg"; + clock-control-debugfs = "true"; + clock-names-option = "ife_dsp_clk"; + clocks-option = <&clock_camcc CAM_CC_IFE_0_DSP_CLK>; + clock-rates-option = <720000000>; + ubwc-static-cfg = <0x1026 0x1036>; + status = "ok"; + }; + + cam_csid1: qcom,csid1@acc4200 { + cell-index = <1>; + compatible = "qcom,csid480"; + reg-names = "csid"; + reg = <0xacc4200 0x1000>; + reg-cam-base = <0xc4200>; + interrupt-names = "csid"; + interrupts = <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>; + regulator-names = "camss", "ife1"; + camss-supply = <&titan_top_gdsc>; + ife1-supply = <&ife_1_gdsc>; + clock-names = + "ife_csid_clk_src", + "ife_csid_clk", + "cphy_rx_clk_src", + "ife_cphy_rx_clk", + "ife_clk_src", + "ife_clk", + "ife_1_areg", + "ife_1_ahb", + "ife_axi_clk"; + clocks = + <&clock_camcc CAM_CC_IFE_1_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_1_CSID_CLK>, + <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_1_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_1_CLK>, + <&clock_camcc CAM_CC_IFE_1_AREG_CLK>, + <&clock_camcc CAM_CC_IFE_1_AHB_CLK>, + <&clock_camcc CAM_CC_IFE_1_AXI_CLK>; + clock-rates = + <400000000 0 400000000 0 350000000 0 100000000 0 0>, + <400000000 0 400000000 0 475000000 0 200000000 0 0>, + <400000000 0 400000000 0 576000000 0 300000000 0 0>, + <400000000 0 400000000 0 720000000 0 400000000 0 0>; + clock-cntl-level = "lowsvs", "svs", "svs_l1", "turbo"; + src-clock-name = "ife_csid_clk_src"; + clock-control-debugfs = "true"; + status = "ok"; + }; + + cam_vfe1: qcom,ife1@acc3000 { + cell-index = <1>; + compatible = "qcom,vfe480"; + reg-names = "ife", "cam_camnoc"; + reg = <0xacc3000 0xd000>, + <0xac42000 0x8000>; + reg-cam-base = <0xc3000 0x42000>; + interrupt-names = "ife"; + interrupts = <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>; + regulator-names = "camss", "ife1"; + camss-supply = <&titan_top_gdsc>; + ife1-supply = <&ife_1_gdsc>; + clock-names = + "ife_1_ahb", + "ife_1_areg", + "ife_clk_src", + "ife_clk", + "ife_axi_clk"; + clocks = + <&clock_camcc CAM_CC_IFE_1_AHB_CLK>, + <&clock_camcc CAM_CC_IFE_1_AREG_CLK>, + <&clock_camcc CAM_CC_IFE_1_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_1_CLK>, + <&clock_camcc CAM_CC_IFE_1_AXI_CLK>; + clock-rates = + <0 100000000 350000000 0 0>, + <0 200000000 475000000 0 0>, + <0 300000000 576000000 0 0>, + <0 400000000 720000000 0 0>; + clock-cntl-level = "lowsvs", "svs", "svs_l1", "turbo"; + src-clock-name = "ife_clk_src"; + scl-clk-names = "ife_1_areg"; + clock-control-debugfs = "true"; + clock-names-option = "ife_dsp_clk"; + clocks-option = <&clock_camcc CAM_CC_IFE_1_DSP_CLK>; + clock-rates-option = <720000000>; + ubwc-static-cfg = <0x1026 0x1036>; + status = "ok"; + }; + + cam_csid_lite0: qcom,csid-lite0@acd9200 { + cell-index = <2>; + compatible = "qcom,csid-lite480"; + reg-names = "csid-lite"; + reg = <0xacd9200 0x1000>; + reg-cam-base = <0xd9200>; + interrupt-names = "csid-lite"; + interrupts = <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>; + regulator-names = "camss"; + camss-supply = <&titan_top_gdsc>; + clock-names = + "ife_csid_clk_src", + "ife_csid_clk", + "cphy_rx_clk_src", + "ife_cphy_rx_clk", + "ife_clk_src", + "ife_lite_ahb", + "ife_clk"; + clocks = + <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>, + <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_LITE_AHB_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CLK>; + clock-rates = + <400000000 0 0 0 400000000 0 0>, + <400000000 0 0 0 480000000 0 0>, + <400000000 0 0 0 480000000 0 0>, + <400000000 0 0 0 480000000 0 0>; + clock-cntl-level = "lowsvs", "svs", "svs_l1", "turbo"; + src-clock-name = "ife_csid_clk_src"; + clock-control-debugfs = "true"; + status = "ok"; + }; + + cam_vfe_lite0: qcom,ife-lite0@acd9000 { + cell-index = <2>; + compatible = "qcom,vfe-lite480"; + reg-names = "ife-lite"; + reg = <0xacd9000 0x2200>; + reg-cam-base = <0xd9000>; + interrupt-names = "ife-lite"; + interrupts = <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>; + regulator-names = "camss"; + camss-supply = <&titan_top_gdsc>; + clock-names = + "ife_lite_ahb", + "ife_lite_axi", + "ife_clk_src", + "ife_clk"; + clocks = + <&clock_camcc CAM_CC_IFE_LITE_AHB_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_AXI_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_LITE_CLK>; + clock-rates = + <0 0 400000000 0>, + <0 0 480000000 0>, + <0 0 480000000 0>, + <0 0 480000000 0>; + clock-cntl-level = "lowsvs", "svs", "svs_l1", "turbo"; + src-clock-name = "ife_clk_src"; + clock-control-debugfs = "true"; + status = "ok"; + }; + + cam_csid_lite1: qcom,csid-lite1@acdb400 { + cell-index = <3>; + compatible = "qcom,csid-lite480"; + reg-names = "csid-lite"; + reg = <0xacdb400 0x1000>; + reg-cam-base = <0xdb400>; + interrupt-names = "csid-lite"; + interrupts = <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>; + regulator-names = "camss"; + camss-supply = <&titan_top_gdsc>; + clock-names = + "ife_csid_clk_src", + "ife_lite_ahb", + "ife_csid_clk", + "cphy_rx_clk_src", + "ife_cphy_rx_clk", + "ife_clk_src", + "ife_clk"; + clocks = + <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>, + <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_LITE_AHB_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CLK>; + clock-rates = + <400000000 0 0 0 400000000 0 0>, + <400000000 0 0 0 480000000 0 0>, + <400000000 0 0 0 480000000 0 0>, + <400000000 0 0 0 480000000 0 0>; + clock-cntl-level = "lowsvs", "svs", "svs_l1", "turbo"; + src-clock-name = "ife_csid_clk_src"; + clock-control-debugfs = "true"; + status = "ok"; + }; + + cam_vfe_lite1: qcom,ife-lite1@acdb200 { + cell-index = <3>; + compatible = "qcom,vfe-lite480"; + reg-names = "ife-lite"; + reg = <0xacdb200 0x2200>; + reg-cam-base = <0xdb200>; + interrupt-names = "ife-lite"; + interrupts = <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>; + regulator-names = "camss"; + camss-supply = <&titan_top_gdsc>; + clock-names = + "ife_lite_ahb", + "ife_lite_axi", + "ife_clk_src", + "ife_clk"; + clocks = + <&clock_camcc CAM_CC_IFE_LITE_AHB_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_AXI_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_LITE_CLK>; + clock-rates = + <0 0 400000000 0>, + <0 0 480000000 0>, + <0 0 480000000 0>, + <0 0 480000000 0>; + clock-cntl-level = "lowsvs", "svs", "svs_l1", "turbo"; + src-clock-name = "ife_clk_src"; + clock-control-debugfs = "true"; + status = "ok"; + }; + + qcom,cam-icp { + compatible = "qcom,cam-icp"; + compat-hw-name = "qcom,a5", + "qcom,ipe0", + "qcom,bps"; + num-a5 = <1>; + num-ipe = <1>; + num-bps = <1>; + status = "ok"; + icp_pc_en; + ipe_bps_pc_en; + }; + + cam_a5: qcom,a5@ac00000 { + cell-index = <0>; + compatible = "qcom,cam-a5"; + reg = <0xac00000 0x6000>, + <0xac10000 0x8000>, + <0xac18000 0x3000>; + reg-names = "a5_qgic", "a5_sierra", "a5_csr"; + reg-cam-base = <0x00000 0x10000 0x18000>; + interrupts = <GIC_SPI 463 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "a5"; + regulator-names = "camss-vdd"; + camss-vdd-supply = <&titan_top_gdsc>; + clock-names = + "soc_fast_ahb", + "icp_ahb_clk", + "icp_clk_src", + "icp_clk"; + src-clock-name = "icp_clk_src"; + clocks = + <&clock_camcc CAM_CC_FAST_AHB_CLK_SRC>, + <&clock_camcc CAM_CC_ICP_AHB_CLK>, + <&clock_camcc CAM_CC_ICP_CLK_SRC>, + <&clock_camcc CAM_CC_ICP_CLK>; + + clock-rates = + <100000000 0 400000000 0>, + <200000000 0 480000000 0>, + <300000000 0 600000000 0>, + <400000000 0 600000000 0>, + <400000000 0 600000000 0>; + clock-cntl-level = "lowsvs", "svs", "svs_l1", + "nominal", "turbo"; + fw_name = "CAMERA_ICP.elf"; + ubwc-ipe-fetch-cfg = <0x707b 0x7083>; + ubwc-ipe-write-cfg = <0x161ef 0x1620f>; + ubwc-bps-fetch-cfg = <0x707b 0x7083>; + ubwc-bps-write-cfg = <0x161ef 0x1620f>; + status = "ok"; + }; + + cam_ipe0: qcom,ipe0 { + cell-index = <0>; + compatible = "qcom,cam-ipe"; + reg = <0xac9a000 0xc000>; + reg-names = "ipe0_top"; + reg-cam-base = <0x9a000>; + regulator-names = "ipe0-vdd"; + ipe0-vdd-supply = <&ipe_0_gdsc>; + clock-names = + "ipe_0_ahb_clk", + "ipe_0_areg_clk", + "ipe_0_axi_clk", + "ipe_0_clk_src", + "ipe_0_clk"; + src-clock-name = "ipe_0_clk_src"; + clock-control-debugfs = "true"; + clocks = + <&clock_camcc CAM_CC_IPE_0_AHB_CLK>, + <&clock_camcc CAM_CC_IPE_0_AREG_CLK>, + <&clock_camcc CAM_CC_IPE_0_AXI_CLK>, + <&clock_camcc CAM_CC_IPE_0_CLK_SRC>, + <&clock_camcc CAM_CC_IPE_0_CLK>; + + clock-rates = + <0 0 0 300000000 0>, + <0 0 0 475000000 0>, + <0 0 0 525000000 0>, + <0 0 0 700000000 0>, + <0 0 0 700000000 0>; + clock-cntl-level = "lowsvs", "svs", "svs_l1", + "nominal", "turbo"; + status = "ok"; + }; + + cam_bps: qcom,bps { + cell-index = <0>; + compatible = "qcom,cam-bps"; + reg = <0xac7a000 0x8000>; + reg-names = "bps_top"; + reg-cam-base = <0x7a000>; + regulator-names = "bps-vdd"; + bps-vdd-supply = <&bps_gdsc>; + clock-names = + "bps_ahb_clk", + "bps_areg_clk", + "bps_axi_clk", + "bps_clk_src", + "bps_clk"; + src-clock-name = "bps_clk_src"; + clock-control-debugfs = "true"; + clocks = + <&clock_camcc CAM_CC_BPS_AHB_CLK>, + <&clock_camcc CAM_CC_BPS_AREG_CLK>, + <&clock_camcc CAM_CC_BPS_AXI_CLK>, + <&clock_camcc CAM_CC_BPS_CLK_SRC>, + <&clock_camcc CAM_CC_BPS_CLK>; + + clock-rates = + <0 0 0 200000000 0>, + <0 0 0 400000000 0>, + <0 0 0 480000000 0>, + <0 0 0 600000000 0>, + <0 0 0 600000000 0>; + clock-cntl-level = "lowsvs", "svs", "svs_l1", + "nominal", "turbo"; + status = "ok"; + }; + + qcom,cam-jpeg { + compatible = "qcom,cam-jpeg"; + compat-hw-name = "qcom,jpegenc", + "qcom,jpegdma"; + num-jpeg-enc = <1>; + num-jpeg-dma = <1>; + status = "ok"; + }; + + cam_jpeg_enc: qcom,jpegenc@ac53000 { + cell-index = <0>; + compatible = "qcom,cam_jpeg_enc"; + reg-names = "jpege_hw"; + reg = <0xac53000 0x4000>; + reg-cam-base = <0x53000>; + interrupt-names = "jpeg"; + interrupts = <GIC_SPI 474 IRQ_TYPE_EDGE_RISING>; + regulator-names = "camss-vdd"; + camss-vdd-supply = <&titan_top_gdsc>; + clock-names = + "jpegenc_clk_src", + "jpegenc_clk"; + clocks = + <&clock_camcc CAM_CC_JPEG_CLK_SRC>, + <&clock_camcc CAM_CC_JPEG_CLK>; + + clock-rates = <600000000 0>; + src-clock-name = "jpegenc_clk_src"; + clock-cntl-level = "nominal"; + status = "ok"; + }; + + cam_jpeg_dma: qcom,jpegdma@ac57000 { + cell-index = <0>; + compatible = "qcom,cam_jpeg_dma"; + reg-names = "jpegdma_hw"; + reg = <0xac57000 0x4000>; + reg-cam-base = <0x57000>; + interrupt-names = "jpegdma"; + interrupts = <GIC_SPI 475 IRQ_TYPE_EDGE_RISING>; + regulator-names = "camss-vdd"; + camss-vdd-supply = <&titan_top_gdsc>; + clock-names = + "jpegdma_clk_src", + "jpegdma_clk"; + clocks = + <&clock_camcc CAM_CC_JPEG_CLK_SRC>, + <&clock_camcc CAM_CC_JPEG_CLK>; + + clock-rates = <600000000 0>; + src-clock-name = "jpegdma_clk_src"; + clock-cntl-level = "nominal"; + status = "ok"; + }; + + qcom,cam-fd { + compatible = "qcom,cam-fd"; + compat-hw-name = "qcom,fd"; + num-fd = <1>; + status = "ok"; + }; + + cam_fd: qcom,fd@ac5f000 { + cell-index = <0>; + compatible = "qcom,fd600"; + reg-names = "fd_core", "fd_wrapper"; + reg = <0xac5f000 0x1000>, + <0xac60000 0x400>; + reg-cam-base = <0x5f000 0x60000>; + interrupt-names = "fd"; + interrupts = <GIC_SPI 462 IRQ_TYPE_EDGE_RISING>; + regulator-names = "camss-vdd"; + camss-vdd-supply = <&titan_top_gdsc>; + clock-names = + "fd_core_clk_src", + "fd_core_clk", + "fd_core_uar_clk"; + clocks = + <&clock_camcc CAM_CC_FD_CORE_CLK_SRC>, + <&clock_camcc CAM_CC_FD_CORE_CLK>, + <&clock_camcc CAM_CC_FD_CORE_UAR_CLK>; + src-clock-name = "fd_core_clk_src"; + clock-control-debugfs = "true"; + clock-cntl-level = "svs", "svs_l1", "turbo"; + clock-rates = + <400000000 0 0>, + <480000000 0 0>, + <600000000 0 0>; + status = "ok"; + qcom,msm-bus,name = "fd_core"; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/camera/lito-camera-sensor-cdp.dtsi b/arch/arm64/boot/dts/vendor/qcom/camera/lito-camera-sensor-cdp.dtsi new file mode 100644 index 000000000000..c3467e225a08 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/camera/lito-camera-sensor-cdp.dtsi @@ -0,0 +1,293 @@ +#include <dt-bindings/clock/qcom,camcc-lito.h> + +&soc { + led_flash_rear: qcom,camera-flash@0 { + cell-index = <0>; + reg = <0x00 0x00>; + compatible = "qcom,camera-flash"; + flash-source = <&pm8150l_flash0 &pm8150l_flash1>; + torch-source = <&pm8150l_torch0 &pm8150l_torch1>; + switch-source = <&pm8150l_switch2>; + }; + + led_flash_rear_aux: qcom,camera-flash@1 { + cell-index = <1>; + reg = <0x01 0x00>; + compatible = "qcom,camera-flash"; + flash-source = <&pm8150l_flash0 &pm8150l_flash1>; + torch-source = <&pm8150l_torch0 &pm8150l_torch1>; + switch-source = <&pm8150l_switch2>; + }; + + qcom,cam-res-mgr { + compatible = "qcom,cam-res-mgr"; + status = "ok"; + }; +}; + +&cam_cci0 { + actuator_rear: qcom,actuator@0 { + cell-index = <0>; + reg = <0x0>; + compatible = "qcom,actuator"; + cci-master = <0>; + cam_vaf-supply = <&L5P>; + regulator-names = "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <2800000>; + rgltr-max-voltage = <2800000>; + rgltr-load-current = <100000>; + status = "ok"; + }; + + eeprom_rear: qcom,eeprom@0 { + cell-index = <0>; + reg = <0>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L4P>; + cam_vdig-supply = <&L2P>; + cam_clk-supply = <&titan_top_gdsc>; + cam_vaf-supply = <&L5P>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2800000 1104000 0 2800000>; + rgltr-max-voltage = <1800000 2800000 1104000 0 2800000>; + rgltr-load-current = <0 80000 105000 0 100000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active + &cam_sensor_active_rear>; + pinctrl-1 = <&cam_sensor_mclk0_suspend + &cam_sensor_suspend_rear>; + gpios = <&tlmm 13 0>, + <&tlmm 30 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK0", + "CAM_RESET0"; + sensor-position = <0>; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&camcc CAM_CC_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + eeprom_rear_aux: qcom,eeprom@1 { + cell-index = <1>; + reg = <0x1>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L3P>; + cam_vdig-supply = <&S8C>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2800000 1350000 0>; + rgltr-max-voltage = <1800000 2800000 1350000 0>; + rgltr-load-current = <0 80000 1200000 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk1_active + &cam_sensor_active_rear_aux>; + pinctrl-1 = <&cam_sensor_mclk1_suspend + &cam_sensor_suspend_rear_aux>; + gpios = <&tlmm 14 0>, + <&tlmm 29 0>, + <&tlmm 71 0>; + gpio-reset = <1>; + gpio-vdig = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <1 0 0>; + gpio-req-tbl-label = "CAMIF_MCLK1", + "CAM_RESET1", + "CAM_VDIG1"; + sensor-position = <0>; + sensor-mode = <0>; + cci-master = <1>; + clocks = <&camcc CAM_CC_MCLK1_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + status="ok"; + }; + + qcom,cam-sensor@0 { + cell-index = <0>; + compatible = "qcom,cam-sensor"; + reg = <0x0>; + csiphy-sd-index = <0>; + sensor-position-roll = <90>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + actuator-src = <&actuator_rear>; + led-flash-src = <&led_flash_rear>; + eeprom-src = <&eeprom_rear>; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L4P>; + cam_vdig-supply = <&L2P>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1104000 0>; + rgltr-max-voltage = <1800000 2800000 1104000 0>; + rgltr-load-current = <0 80000 105000 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active + &cam_sensor_active_rear>; + pinctrl-1 = <&cam_sensor_mclk0_suspend + &cam_sensor_suspend_rear>; + gpios = <&tlmm 13 0>, + <&tlmm 30 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK0", + "CAM_RESET0"; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&camcc CAM_CC_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor@1 { + cell-index = <1>; + compatible = "qcom,cam-sensor"; + reg = <0x1>; + csiphy-sd-index = <1>; + sensor-position-roll = <90>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + led-flash-src = <&led_flash_rear_aux>; + eeprom-src = <&eeprom_rear_aux>; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L3P>; + cam_vdig-supply = <&S8C>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1350000 0>; + rgltr-max-voltage = <1800000 2800000 1350000 0>; + rgltr-load-current = <0 80000 1200000 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk1_active + &cam_sensor_active_rear_aux>; + pinctrl-1 = <&cam_sensor_mclk1_suspend + &cam_sensor_suspend_rear_aux>; + gpios = <&tlmm 14 0>, + <&tlmm 29 0>, + <&tlmm 71 0>; + gpio-reset = <1>; + gpio-vdig = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <1 0 0>; + gpio-req-tbl-label = "CAMIF_MCLK1", + "CAM_RESET1", + "CAM_VDIG1"; + sensor-mode = <0>; + cci-master = <1>; + clocks = <&camcc CAM_CC_MCLK1_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + status = "ok"; + clock-rates = <24000000>; + }; +}; + +&cam_cci1 { + eeprom_front: qcom,eeprom@2 { + cell-index = <2>; + reg = <0x2>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L3P>; + cam_vdig-supply = <&L1P>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2800000 1056000 0>; + rgltr-max-voltage = <1800000 2800000 1056000 0>; + rgltr-load-current = <0 80000 105000 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk2_active + &cam_sensor_active_front>; + pinctrl-1 = <&cam_sensor_mclk2_suspend + &cam_sensor_suspend_front>; + gpios = <&tlmm 15 0>, + <&tlmm 32 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK2", + "CAM_RESET2"; + sensor-position = <1>; + sensor-mode = <0>; + cci-device = <1>; + cci-master = <0>; + status = "ok"; + clocks = <&camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor@2 { + cell-index = <2>; + compatible = "qcom,cam-sensor"; + reg = <0x02>; + csiphy-sd-index = <2>; + sensor-position-roll = <270>; + sensor-position-pitch = <0>; + sensor-position-yaw = <0>; + eeprom-src = <&eeprom_front>; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L3P>; + cam_vdig-supply = <&L1P>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1056000 0>; + rgltr-max-voltage = <1800000 2800000 1056000 0>; + rgltr-load-current = <0 80000 105000 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk2_active + &cam_sensor_active_front>; + pinctrl-1 = <&cam_sensor_mclk2_suspend + &cam_sensor_suspend_front>; + gpios = <&tlmm 15 0>, + <&tlmm 32 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK2", + "CAM_RESET2"; + sensor-mode = <0>; + cci-device = <1>; + cci-master = <0>; + status = "ok"; + clocks = <&camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/camera/lito-camera-sensor-mtp.dtsi b/arch/arm64/boot/dts/vendor/qcom/camera/lito-camera-sensor-mtp.dtsi new file mode 100644 index 000000000000..c3467e225a08 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/camera/lito-camera-sensor-mtp.dtsi @@ -0,0 +1,293 @@ +#include <dt-bindings/clock/qcom,camcc-lito.h> + +&soc { + led_flash_rear: qcom,camera-flash@0 { + cell-index = <0>; + reg = <0x00 0x00>; + compatible = "qcom,camera-flash"; + flash-source = <&pm8150l_flash0 &pm8150l_flash1>; + torch-source = <&pm8150l_torch0 &pm8150l_torch1>; + switch-source = <&pm8150l_switch2>; + }; + + led_flash_rear_aux: qcom,camera-flash@1 { + cell-index = <1>; + reg = <0x01 0x00>; + compatible = "qcom,camera-flash"; + flash-source = <&pm8150l_flash0 &pm8150l_flash1>; + torch-source = <&pm8150l_torch0 &pm8150l_torch1>; + switch-source = <&pm8150l_switch2>; + }; + + qcom,cam-res-mgr { + compatible = "qcom,cam-res-mgr"; + status = "ok"; + }; +}; + +&cam_cci0 { + actuator_rear: qcom,actuator@0 { + cell-index = <0>; + reg = <0x0>; + compatible = "qcom,actuator"; + cci-master = <0>; + cam_vaf-supply = <&L5P>; + regulator-names = "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <2800000>; + rgltr-max-voltage = <2800000>; + rgltr-load-current = <100000>; + status = "ok"; + }; + + eeprom_rear: qcom,eeprom@0 { + cell-index = <0>; + reg = <0>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L4P>; + cam_vdig-supply = <&L2P>; + cam_clk-supply = <&titan_top_gdsc>; + cam_vaf-supply = <&L5P>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2800000 1104000 0 2800000>; + rgltr-max-voltage = <1800000 2800000 1104000 0 2800000>; + rgltr-load-current = <0 80000 105000 0 100000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active + &cam_sensor_active_rear>; + pinctrl-1 = <&cam_sensor_mclk0_suspend + &cam_sensor_suspend_rear>; + gpios = <&tlmm 13 0>, + <&tlmm 30 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK0", + "CAM_RESET0"; + sensor-position = <0>; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&camcc CAM_CC_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + eeprom_rear_aux: qcom,eeprom@1 { + cell-index = <1>; + reg = <0x1>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L3P>; + cam_vdig-supply = <&S8C>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2800000 1350000 0>; + rgltr-max-voltage = <1800000 2800000 1350000 0>; + rgltr-load-current = <0 80000 1200000 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk1_active + &cam_sensor_active_rear_aux>; + pinctrl-1 = <&cam_sensor_mclk1_suspend + &cam_sensor_suspend_rear_aux>; + gpios = <&tlmm 14 0>, + <&tlmm 29 0>, + <&tlmm 71 0>; + gpio-reset = <1>; + gpio-vdig = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <1 0 0>; + gpio-req-tbl-label = "CAMIF_MCLK1", + "CAM_RESET1", + "CAM_VDIG1"; + sensor-position = <0>; + sensor-mode = <0>; + cci-master = <1>; + clocks = <&camcc CAM_CC_MCLK1_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + status="ok"; + }; + + qcom,cam-sensor@0 { + cell-index = <0>; + compatible = "qcom,cam-sensor"; + reg = <0x0>; + csiphy-sd-index = <0>; + sensor-position-roll = <90>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + actuator-src = <&actuator_rear>; + led-flash-src = <&led_flash_rear>; + eeprom-src = <&eeprom_rear>; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L4P>; + cam_vdig-supply = <&L2P>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1104000 0>; + rgltr-max-voltage = <1800000 2800000 1104000 0>; + rgltr-load-current = <0 80000 105000 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active + &cam_sensor_active_rear>; + pinctrl-1 = <&cam_sensor_mclk0_suspend + &cam_sensor_suspend_rear>; + gpios = <&tlmm 13 0>, + <&tlmm 30 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK0", + "CAM_RESET0"; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&camcc CAM_CC_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor@1 { + cell-index = <1>; + compatible = "qcom,cam-sensor"; + reg = <0x1>; + csiphy-sd-index = <1>; + sensor-position-roll = <90>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + led-flash-src = <&led_flash_rear_aux>; + eeprom-src = <&eeprom_rear_aux>; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L3P>; + cam_vdig-supply = <&S8C>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1350000 0>; + rgltr-max-voltage = <1800000 2800000 1350000 0>; + rgltr-load-current = <0 80000 1200000 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk1_active + &cam_sensor_active_rear_aux>; + pinctrl-1 = <&cam_sensor_mclk1_suspend + &cam_sensor_suspend_rear_aux>; + gpios = <&tlmm 14 0>, + <&tlmm 29 0>, + <&tlmm 71 0>; + gpio-reset = <1>; + gpio-vdig = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <1 0 0>; + gpio-req-tbl-label = "CAMIF_MCLK1", + "CAM_RESET1", + "CAM_VDIG1"; + sensor-mode = <0>; + cci-master = <1>; + clocks = <&camcc CAM_CC_MCLK1_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + status = "ok"; + clock-rates = <24000000>; + }; +}; + +&cam_cci1 { + eeprom_front: qcom,eeprom@2 { + cell-index = <2>; + reg = <0x2>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L3P>; + cam_vdig-supply = <&L1P>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2800000 1056000 0>; + rgltr-max-voltage = <1800000 2800000 1056000 0>; + rgltr-load-current = <0 80000 105000 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk2_active + &cam_sensor_active_front>; + pinctrl-1 = <&cam_sensor_mclk2_suspend + &cam_sensor_suspend_front>; + gpios = <&tlmm 15 0>, + <&tlmm 32 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK2", + "CAM_RESET2"; + sensor-position = <1>; + sensor-mode = <0>; + cci-device = <1>; + cci-master = <0>; + status = "ok"; + clocks = <&camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor@2 { + cell-index = <2>; + compatible = "qcom,cam-sensor"; + reg = <0x02>; + csiphy-sd-index = <2>; + sensor-position-roll = <270>; + sensor-position-pitch = <0>; + sensor-position-yaw = <0>; + eeprom-src = <&eeprom_front>; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L3P>; + cam_vdig-supply = <&L1P>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1056000 0>; + rgltr-max-voltage = <1800000 2800000 1056000 0>; + rgltr-load-current = <0 80000 105000 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk2_active + &cam_sensor_active_front>; + pinctrl-1 = <&cam_sensor_mclk2_suspend + &cam_sensor_suspend_front>; + gpios = <&tlmm 15 0>, + <&tlmm 32 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK2", + "CAM_RESET2"; + sensor-mode = <0>; + cci-device = <1>; + cci-master = <0>; + status = "ok"; + clocks = <&camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/camera/lito-camera-sensor-qrd.dtsi b/arch/arm64/boot/dts/vendor/qcom/camera/lito-camera-sensor-qrd.dtsi new file mode 100644 index 000000000000..08cdafb240a1 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/camera/lito-camera-sensor-qrd.dtsi @@ -0,0 +1,672 @@ +#include <dt-bindings/clock/qcom,camcc-lito.h> + +&soc { + led_flash_rear: qcom,camera-flash@0 { + cell-index = <0>; + reg = <0x00 0x00>; + compatible = "qcom,camera-flash"; + flash-source = <&pm8150l_flash0 &pm8150l_flash1>; + torch-source = <&pm8150l_torch0 &pm8150l_torch1>; + switch-source = <&pm8150l_switch2>; + }; + + led_flash_rear_aux: qcom,camera-flash@1 { + cell-index = <1>; + reg = <0x01 0x00>; + compatible = "qcom,camera-flash"; + flash-source = <&pm8150l_flash0 &pm8150l_flash1>; + torch-source = <&pm8150l_torch0 &pm8150l_torch1>; + switch-source = <&pm8150l_switch2>; + }; + + led_flash_triple_rear: qcom,camera-flash@4 { + cell-index = <4>; + reg = <0x04 0x00>; + compatible = "qcom,camera-flash"; + flash-source = <&pm8150l_flash0 &pm8150l_flash1>; + torch-source = <&pm8150l_torch0 &pm8150l_torch1>; + switch-source = <&pm8150l_switch2>; + }; + + led_flash_triple_rear_aux: qcom,camera-flash@5 { + cell-index = <5>; + reg = <0x05 0x00>; + compatible = "qcom,camera-flash"; + flash-source = <&pm8150l_flash0 &pm8150l_flash1>; + torch-source = <&pm8150l_torch0 &pm8150l_torch1>; + switch-source = <&pm8150l_switch2>; + }; + + led_flash_triple_rear_aux2: qcom,camera-flash@6 { + cell-index = <6>; + reg = <0x06 0x00>; + compatible = "qcom,camera-flash"; + flash-source = <&pm8150l_flash0 &pm8150l_flash1>; + torch-source = <&pm8150l_torch0 &pm8150l_torch1>; + switch-source = <&pm8150l_switch2>; + }; + + vreg_tof: regulator-dbb1 { + compatible = "regulator-fixed"; + regulator-name = "vdd_tof"; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + gpio = <&pm8150l_gpios 2 GPIO_ACTIVE_HIGH>; + startup-delay-us = <1000>; + enable-active-high; + }; + + qcom,cam-res-mgr { + compatible = "qcom,cam-res-mgr"; + status = "ok"; + }; +}; + +&cam_cci0 { + actuator_rear: qcom,actuator@0 { + cell-index = <0>; + reg = <0x0>; + compatible = "qcom,actuator"; + cci-master = <0>; + cam_vaf-supply = <&L5P>; + regulator-names = "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <2800000>; + rgltr-max-voltage = <2800000>; + rgltr-load-current = <100000>; + status = "ok"; + }; + + actuator_triple_rear: qcom,actuator@4 { + cell-index = <4>; + reg = <0x4>; + compatible = "qcom,actuator"; + cci-device = <0>; + cci-master = <0>; + cam_vaf-supply = <&L5P>; + regulator-names = "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <2800000>; + rgltr-max-voltage = <2800000>; + rgltr-load-current = <100000>; + status = "ok"; + }; + + actuator_triple_rear_aux2: qcom,actuator@6 { + cell-index = <6>; + reg = <0x6>; + compatible = "qcom,actuator"; + cci-device = <0>; + cci-master = <1>; + cam_vaf-supply = <&L5P>; + regulator-names = "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <2800000>; + rgltr-max-voltage = <2800000>; + rgltr-load-current = <100000>; + status = "ok"; + }; + + eeprom_rear: qcom,eeprom@0 { + cell-index = <0>; + reg = <0>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L4P>; + cam_vdig-supply = <&L2P>; + cam_clk-supply = <&titan_top_gdsc>; + cam_vaf-supply = <&L5P>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2800000 1104000 0 2800000>; + rgltr-max-voltage = <1800000 2800000 1104000 0 2800000>; + rgltr-load-current = <0 80000 105000 0 100000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active + &cam_sensor_active_rear>; + pinctrl-1 = <&cam_sensor_mclk0_suspend + &cam_sensor_suspend_rear>; + gpios = <&tlmm 13 0>, + <&tlmm 30 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK0", + "CAM_RESET0"; + sensor-position = <0>; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&camcc CAM_CC_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + eeprom_rear_aux: qcom,eeprom@1 { + cell-index = <1>; + reg = <0x1>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L3P>; + cam_vdig-supply = <&S8C>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2800000 1350000 0>; + rgltr-max-voltage = <1800000 2800000 1350000 0>; + rgltr-load-current = <0 80000 1200000 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk1_active + &cam_sensor_active_rear_aux>; + pinctrl-1 = <&cam_sensor_mclk1_suspend + &cam_sensor_suspend_rear_aux>; + gpios = <&tlmm 14 0>, + <&tlmm 29 0>, + <&tlmm 71 0>; + gpio-reset = <1>; + gpio-vdig = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <1 0 0>; + gpio-req-tbl-label = "CAMIF_MCLK1", + "CAM_RESET1", + "CAM_VDIG1"; + sensor-position = <0>; + sensor-mode = <0>; + cci-master = <1>; + clocks = <&camcc CAM_CC_MCLK1_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + status="ok"; + }; + + eeprom_triple_rear: qcom,eeprom@4 { + cell-index = <4>; + reg = <4>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L4P>; + cam_vdig-supply = <&L2P>; + cam_clk-supply = <&titan_top_gdsc>; + cam_vaf-supply = <&L5P>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2800000 1104000 0 2800000>; + rgltr-max-voltage = <1800000 2800000 1104000 0 2800000>; + rgltr-load-current = <0 80000 105000 0 100000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active + &cam_sensor_active_rear>; + pinctrl-1 = <&cam_sensor_mclk0_suspend + &cam_sensor_suspend_rear>; + gpios = <&tlmm 13 0>, + <&tlmm 30 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK4", + "CAM_RESET4"; + sensor-mode = <0>; + cci-device = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&camcc CAM_CC_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + eeprom_triple_rear_aux2: qcom,eeprom@6 { + cell-index = <6>; + reg = <6>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L3P>; + cam_vdig-supply = <&L1P>; + cam_clk-supply = <&titan_top_gdsc>; + cam_vaf-supply = <&L5P>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2800000 1056000 0 2800000>; + rgltr-max-voltage = <1800000 2800000 1056000 0 2800000>; + rgltr-load-current = <0 80000 105000 0 100000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk4_active + &cam_sensor_active_rear_aux2>; + pinctrl-1 = <&cam_sensor_mclk4_suspend + &cam_sensor_suspend_rear_aux2>; + gpios = <&tlmm 25 0>, + <&tlmm 21 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK6", + "CAM_RESET6"; + sensor-mode = <0>; + cci-device = <0>; + cci-master = <1>; + status = "ok"; + clocks = <&camcc CAM_CC_MCLK4_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor@0 { + cell-index = <0>; + compatible = "qcom,cam-sensor"; + reg = <0x0>; + csiphy-sd-index = <0>; + sensor-position-roll = <90>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + actuator-src = <&actuator_rear>; + led-flash-src = <&led_flash_rear>; + eeprom-src = <&eeprom_rear>; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L4P>; + cam_vdig-supply = <&L2P>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1104000 0>; + rgltr-max-voltage = <1800000 2800000 1104000 0>; + rgltr-load-current = <0 80000 105000 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active + &cam_sensor_active_rear>; + pinctrl-1 = <&cam_sensor_mclk0_suspend + &cam_sensor_suspend_rear>; + gpios = <&tlmm 13 0>, + <&tlmm 30 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK0", + "CAM_RESET0"; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&camcc CAM_CC_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor@1 { + cell-index = <1>; + compatible = "qcom,cam-sensor"; + reg = <0x1>; + csiphy-sd-index = <1>; + sensor-position-roll = <90>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + led-flash-src = <&led_flash_rear_aux>; + eeprom-src = <&eeprom_rear_aux>; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L3P>; + cam_vdig-supply = <&S8C>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1350000 0>; + rgltr-max-voltage = <1800000 2800000 1350000 0>; + rgltr-load-current = <0 80000 1200000 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk1_active + &cam_sensor_active_rear_aux>; + pinctrl-1 = <&cam_sensor_mclk1_suspend + &cam_sensor_suspend_rear_aux>; + gpios = <&tlmm 14 0>, + <&tlmm 29 0>, + <&tlmm 71 0>; + gpio-reset = <1>; + gpio-vdig = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <1 0 0>; + gpio-req-tbl-label = "CAMIF_MCLK1", + "CAM_RESET1", + "CAM_VDIG1"; + sensor-mode = <0>; + cci-master = <1>; + clocks = <&camcc CAM_CC_MCLK1_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + status = "ok"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor@4 { + cell-index = <4>; + compatible = "qcom,cam-sensor"; + reg = <0x4>; + csiphy-sd-index = <0>; + sensor-position-roll = <90>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + led-flash-src = <&led_flash_triple_rear>; + actuator-src = <&actuator_triple_rear>; + eeprom-src = <&eeprom_triple_rear>; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L4P>; + cam_vdig-supply = <&L2P>; + cam_clk-supply = <&titan_top_gdsc>; + cam_v_custom1-supply = <&L6P>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_v_custom1"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1104000 0 1800000>; + rgltr-max-voltage = <1800000 2800000 1104000 0 1800000>; + rgltr-load-current = <0 80000 105000 0 80000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active + &cam_sensor_active_rear>; + pinctrl-1 = <&cam_sensor_mclk0_suspend + &cam_sensor_suspend_rear>; + gpios = <&tlmm 13 0>, + <&tlmm 30 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK4", + "CAM_RESET4"; + sensor-mode = <0>; + cci-device = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&camcc CAM_CC_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor@6 { + cell-index = <6>; + compatible = "qcom,cam-sensor"; + reg = <0x06>; + csiphy-sd-index = <2>; + sensor-position-roll = <90>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + led-flash-src = <&led_flash_triple_rear_aux2>; + actuator-src = <&actuator_triple_rear_aux2>; + eeprom-src = <&eeprom_triple_rear_aux2>; + cam_vdig-supply = <&L1P>; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L3P>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1056000 0>; + rgltr-max-voltage = <1800000 2800000 1056000 0>; + rgltr-load-current = <0 80000 105000 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk4_active + &cam_sensor_active_rear_aux2>; + pinctrl-1 = <&cam_sensor_mclk4_suspend + &cam_sensor_suspend_rear_aux2>; + gpios = <&tlmm 25 0>, + <&tlmm 21 0>, + <&tlmm 51 0>; + gpio-reset = <1>; + gpio-vana = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <1 0 0>; + gpio-req-tbl-label = "CAMIF_MCLK6", + "CAM_RESET6", + "CAM_VANA6"; + sensor-mode = <0>; + cci-device = <0>; + cci-master = <1>; + status = "ok"; + clocks = <&camcc CAM_CC_MCLK4_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; +}; + +&cam_cci1 { + actuator_triple_rear_aux: qcom,actuator@5 { + cell-index = <5>; + reg = <0x5>; + compatible = "qcom,actuator"; + cci-device = <1>; + cci-master = <0>; + cam_vaf-supply = <&L5P>; + regulator-names = "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <2800000>; + rgltr-max-voltage = <2800000>; + rgltr-load-current = <100000>; + status = "ok"; + }; + + eeprom_front: qcom,eeprom@2 { + cell-index = <2>; + reg = <0x2>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L3P>; + cam_vdig-supply = <&L1P>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 2800000 1056000 0>; + rgltr-max-voltage = <1800000 2800000 1056000 0>; + rgltr-load-current = <0 80000 105000 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk2_active + &cam_sensor_active_front>; + pinctrl-1 = <&cam_sensor_mclk2_suspend + &cam_sensor_suspend_front>; + gpios = <&tlmm 15 0>, + <&tlmm 32 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK2", + "CAM_RESET2"; + sensor-position = <1>; + sensor-mode = <0>; + cci-device = <1>; + cci-master = <0>; + status = "ok"; + clocks = <&camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + eeprom_triple_rear_aux: qcom,eeprom@5 { + cell-index = <5>; + reg = <5>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&BOB>; + cam_vdig-supply = <&L1P>; + cam_clk-supply = <&titan_top_gdsc>; + cam_vaf-supply = <&L5P>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 3008000 1056000 0 2800000>; + rgltr-max-voltage = <1800000 4000000 1056000 0 2800000>; + rgltr-load-current = <0 2000000 105000 0 100000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk1_active + &cam_sensor_active_triple_rear_aux>; + pinctrl-1 = <&cam_sensor_mclk1_suspend + &cam_sensor_suspend_triple_rear_aux>; + gpios = <&tlmm 14 0>, + <&tlmm 29 0>, + <&tlmm 70 0>; + gpio-reset = <1>; + gpio-vana = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <1 0 0>; + gpio-req-tbl-label = "CAMIF_MCLK5", + "CAM_RESET5", + "CAM_VANA5"; + sensor-mode = <0>; + cci-device = <1>; + cci-master = <0>; + status = "ok"; + clocks = <&camcc CAM_CC_MCLK1_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor@2 { + cell-index = <2>; + compatible = "qcom,cam-sensor"; + reg = <0x02>; + csiphy-sd-index = <2>; + sensor-position-roll = <270>; + sensor-position-pitch = <0>; + sensor-position-yaw = <0>; + eeprom-src = <&eeprom_front>; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L3P>; + cam_vdig-supply = <&L1P>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1056000 0>; + rgltr-max-voltage = <1800000 2800000 1056000 0>; + rgltr-load-current = <0 80000 105000 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk2_active + &cam_sensor_active_front>; + pinctrl-1 = <&cam_sensor_mclk2_suspend + &cam_sensor_suspend_front>; + gpios = <&tlmm 15 0>, + <&tlmm 32 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK2", + "CAM_RESET2"; + sensor-mode = <0>; + cci-device = <1>; + cci-master = <0>; + status = "ok"; + clocks = <&camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor@3 { + cell-index = <3>; + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <3>; + sensor-position-roll = <270>; + sensor-position-pitch = <0>; + sensor-position-yaw = <0>; + cam_vio-supply = <&L7P>; + cam_vdig-supply = <&vreg_tof>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vdig", + "cam_clk"; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000 3600000 0>; + rgltr-max-voltage = <1800000 3600000 0>; + rgltr-load-current = <0 120000 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk3_active + &cam_sensor_active_3>; + pinctrl-1 = <&cam_sensor_mclk3_suspend + &cam_sensor_suspend_3>; + gpios = <&tlmm 16 0>, + <&tlmm 23 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK3", + "CAM_RESET3"; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&camcc CAM_CC_MCLK3_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + qcom,cam-sensor@5 { + cell-index = <5>; + compatible = "qcom,cam-sensor"; + reg = <0x5>; + csiphy-sd-index = <1>; + sensor-position-roll = <90>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + led-flash-src = <&led_flash_triple_rear_aux>; + actuator-src = <&actuator_triple_rear_aux>; + eeprom-src = <&eeprom_triple_rear_aux>; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&BOB>; + cam_vdig-supply = <&L1P>; + cam_clk-supply = <&titan_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 3008000 1056000 0>; + rgltr-max-voltage = <1800000 4000000 1056000 0>; + rgltr-load-current = <0 2000000 105000 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk1_active + &cam_sensor_active_triple_rear_aux>; + pinctrl-1 = <&cam_sensor_mclk1_suspend + &cam_sensor_suspend_triple_rear_aux>; + gpios = <&tlmm 14 0>, + <&tlmm 29 0>, + <&tlmm 70 0>; + gpio-reset = <1>; + gpio-vana = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <1 0 0>; + gpio-req-tbl-label = "CAMIF_MCLK5", + "CAM_RESET5", + "CAM_VANA5"; + sensor-mode = <0>; + cci-device = <1>; + cci-master = <0>; + status = "ok"; + clocks = <&camcc CAM_CC_MCLK1_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/camera/lito-camera.dtsi b/arch/arm64/boot/dts/vendor/qcom/camera/lito-camera.dtsi new file mode 100644 index 000000000000..ebeb59660947 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/camera/lito-camera.dtsi @@ -0,0 +1,1617 @@ +#include <dt-bindings/msm/msm-camera.h> + +&soc { + qcom,cam-req-mgr { + compatible = "qcom,cam-req-mgr"; + status = "ok"; + }; + + cam_csiphy0: qcom,csiphy0 { + cell-index = <0>; + compatible = "qcom,csiphy-v1.2.2", "qcom,csiphy"; + reg = <0x0ace0000 0x2000>; + reg-names = "csiphy"; + reg-cam-base = <0xe0000>; + interrupts = <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "csiphy"; + regulator-names = "gdscr", "refgen"; + gdscr-supply = <&titan_top_gdsc>; + refgen-supply = <&refgen>; + csi-vdd-voltage = <880000>; + mipi-csi-vdd-supply = <&L5A>; + clocks = <&camcc CAM_CC_CPHY_RX_CLK_SRC>, + <&camcc CAM_CC_CSIPHY0_CLK>, + <&camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>, + <&camcc CAM_CC_CSI0PHYTIMER_CLK>; + clock-names = "cphy_rx_clk_src", + "csiphy0_clk", + "csi0phytimer_clk_src", + "csi0phytimer_clk"; + src-clock-name = "csi0phytimer_clk_src"; + clock-cntl-level = "lowsvs", "svs", "svs_l1"; + clock-rates = + <300000000 0 300000000 0>, + <384000000 0 300000000 0>, + <400000000 0 300000000 0>; + status = "ok"; + }; + + cam_csiphy1: qcom,csiphy1 { + cell-index = <1>; + compatible = "qcom,csiphy-v1.2.2", "qcom,csiphy"; + reg = <0xace2000 0x2000>; + reg-names = "csiphy"; + reg-cam-base = <0xe2000>; + interrupts = <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "csiphy"; + regulator-names = "gdscr", "refgen"; + gdscr-supply = <&titan_top_gdsc>; + refgen-supply = <&refgen>; + csi-vdd-voltage = <880000>; + mipi-csi-vdd-supply = <&L5A>; + clocks = <&camcc CAM_CC_CPHY_RX_CLK_SRC>, + <&camcc CAM_CC_CSIPHY1_CLK>, + <&camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>, + <&camcc CAM_CC_CSI1PHYTIMER_CLK>; + clock-names = "cphy_rx_clk_src", + "csiphy1_clk", + "csi1phytimer_clk_src", + "csi1phytimer_clk"; + src-clock-name = "csi1phytimer_clk_src"; + clock-cntl-level = "lowsvs", "svs", "svs_l1"; + clock-rates = + <300000000 0 300000000 0>, + <384000000 0 300000000 0>, + <400000000 0 300000000 0>; + + status = "ok"; + }; + + cam_csiphy2: qcom,csiphy2 { + cell-index = <2>; + compatible = "qcom,csiphy-v1.2.2", "qcom,csiphy"; + reg = <0xace4000 0x2000>; + reg-names = "csiphy"; + reg-cam-base = <0xe4000>; + interrupts = <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "csiphy"; + regulator-names = "gdscr", "refgen"; + gdscr-supply = <&titan_top_gdsc>; + refgen-supply = <&refgen>; + csi-vdd-voltage = <880000>; + mipi-csi-vdd-supply = <&L5A>; + clocks = <&camcc CAM_CC_CPHY_RX_CLK_SRC>, + <&camcc CAM_CC_CSIPHY2_CLK>, + <&camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>, + <&camcc CAM_CC_CSI2PHYTIMER_CLK>; + clock-names = "cphy_rx_clk_src", + "csiphy2_clk", + "csi2phytimer_clk_src", + "csi2phytimer_clk"; + src-clock-name = "csi2phytimer_clk_src"; + clock-cntl-level = "lowsvs", "svs", "svs_l1"; + clock-rates = + <300000000 0 300000000 0>, + <384000000 0 300000000 0>, + <400000000 0 300000000 0>; + status = "ok"; + }; + + cam_csiphy3: qcom,csiphy3 { + cell-index = <3>; + compatible = "qcom,csiphy-v1.2.2", "qcom,csiphy"; + reg = <0xace6000 0x2000>; + reg-names = "csiphy"; + reg-cam-base = <0xe6000>; + interrupts = <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "csiphy"; + regulator-names = "gdscr", "refgen"; + gdscr-supply = <&titan_top_gdsc>; + refgen-supply = <&refgen>; + csi-vdd-voltage = <880000>; + mipi-csi-vdd-supply = <&L5A>; + clocks = <&camcc CAM_CC_CPHY_RX_CLK_SRC>, + <&camcc CAM_CC_CSIPHY0_CLK>, + <&camcc CAM_CC_CSIPHY3_CLK>, + <&camcc CAM_CC_CSI3PHYTIMER_CLK_SRC>, + <&camcc CAM_CC_CSI3PHYTIMER_CLK>; + clock-names = "cphy_rx_clk_src", + "csiphy3_clk", + "csi3phytimer_clk_src", + "csi3phytimer_clk"; + src-clock-name = "csi3phytimer_clk_src"; + clock-cntl-level = "lowsvs", "svs", "svs_l1"; + clock-rates = + <300000000 0 300000000 0>, + <384000000 0 300000000 0>, + <400000000 0 300000000 0>; + status = "ok"; + }; + + cam_cci0: qcom,cci0 { + cell-index = <0>; + compatible = "qcom,cci"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xac4a000 0x1000>; + reg-names = "cci"; + reg-cam-base = <0x4a000>; + interrupt-names = "cci"; + interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>; + status = "ok"; + gdscr-supply = <&titan_top_gdsc>; + regulator-names = "gdscr"; + clocks = <&camcc CAM_CC_CCI_0_CLK>, + <&camcc CAM_CC_CCI_0_CLK_SRC>; + clock-names = "cci_0_clk", + "cci_0_clk_src"; + src-clock-name = "cci_0_clk_src"; + clock-cntl-level = "lowsvs"; + clock-rates = <0 37500000>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cci0_active &cci1_active>; + pinctrl-1 = <&cci0_suspend &cci1_suspend>; + gpios = <&tlmm 17 0>, + <&tlmm 18 0>, + <&tlmm 19 0>, + <&tlmm 20 0>; + gpio-req-tbl-num = <0 1 2 3>; + gpio-req-tbl-flags = <1 1 1 1>; + gpio-req-tbl-label = "CCI_I2C_DATA0", + "CCI_I2C_CLK0", + "CCI_I2C_DATA1", + "CCI_I2C_CLK1"; + + i2c_freq_100Khz_cci0: qcom,i2c_standard_mode { + hw-thigh = <201>; + hw-tlow = <174>; + hw-tsu-sto = <204>; + hw-tsu-sta = <231>; + hw-thd-dat = <22>; + hw-thd-sta = <162>; + hw-tbuf = <227>; + hw-scl-stretch-en = <0>; + hw-trdhld = <6>; + hw-tsp = <3>; + cci-clk-src = <37500000>; + status = "ok"; + }; + + i2c_freq_400Khz_cci0: qcom,i2c_fast_mode { + hw-thigh = <38>; + hw-tlow = <56>; + hw-tsu-sto = <40>; + hw-tsu-sta = <40>; + hw-thd-dat = <22>; + hw-thd-sta = <35>; + hw-tbuf = <62>; + hw-scl-stretch-en = <0>; + hw-trdhld = <6>; + hw-tsp = <3>; + cci-clk-src = <37500000>; + status = "ok"; + }; + + i2c_freq_custom_cci0: qcom,i2c_custom_mode { + hw-thigh = <38>; + hw-tlow = <56>; + hw-tsu-sto = <40>; + hw-tsu-sta = <40>; + hw-thd-dat = <22>; + hw-thd-sta = <35>; + hw-tbuf = <62>; + hw-scl-stretch-en = <1>; + hw-trdhld = <6>; + hw-tsp = <3>; + cci-clk-src = <37500000>; + status = "ok"; + }; + + i2c_freq_1Mhz_cci0: qcom,i2c_fast_plus_mode { + hw-thigh = <16>; + hw-tlow = <22>; + hw-tsu-sto = <17>; + hw-tsu-sta = <18>; + hw-thd-dat = <16>; + hw-thd-sta = <15>; + hw-tbuf = <24>; + hw-scl-stretch-en = <0>; + hw-trdhld = <3>; + hw-tsp = <3>; + cci-clk-src = <37500000>; + status = "ok"; + }; + }; + + cam_cci1: qcom,cci1 { + cell-index = <1>; + compatible = "qcom,cci"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xac4b000 0x1000>; + reg-names = "cci"; + reg-cam-base = <0x4b000>; + interrupt-names = "cci"; + interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>; + status = "ok"; + gdscr-supply = <&titan_top_gdsc>; + regulator-names = "gdscr"; + clocks = <&camcc CAM_CC_CCI_1_CLK>, + <&camcc CAM_CC_CCI_1_CLK_SRC>; + clock-names = "cci_clk", + "cci_1_clk_src"; + src-clock-name = "cci_1_clk_src"; + clock-cntl-level = "lowsvs"; + clock-rates = <0 37500000>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cci2_active>; + pinctrl-1 = <&cci2_suspend>; + gpios = <&tlmm 27 0>, + <&tlmm 28 0>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 1>; + gpio-req-tbl-label = "CCI_I2C_DATA2", + "CCI_I2C_CLK2"; + + i2c_freq_100Khz_cci1: qcom,i2c_standard_mode { + hw-thigh = <201>; + hw-tlow = <174>; + hw-tsu-sto = <204>; + hw-tsu-sta = <231>; + hw-thd-dat = <22>; + hw-thd-sta = <162>; + hw-tbuf = <227>; + hw-scl-stretch-en = <0>; + hw-trdhld = <6>; + hw-tsp = <3>; + cci-clk-src = <37500000>; + status = "ok"; + }; + + i2c_freq_400Khz_cci1: qcom,i2c_fast_mode { + hw-thigh = <38>; + hw-tlow = <56>; + hw-tsu-sto = <40>; + hw-tsu-sta = <40>; + hw-thd-dat = <22>; + hw-thd-sta = <35>; + hw-tbuf = <62>; + hw-scl-stretch-en = <0>; + hw-trdhld = <6>; + hw-tsp = <3>; + cci-clk-src = <37500000>; + status = "ok"; + }; + + i2c_freq_custom_cci1: qcom,i2c_custom_mode { + hw-thigh = <38>; + hw-tlow = <56>; + hw-tsu-sto = <40>; + hw-tsu-sta = <40>; + hw-thd-dat = <22>; + hw-thd-sta = <35>; + hw-tbuf = <62>; + hw-scl-stretch-en = <1>; + hw-trdhld = <6>; + hw-tsp = <3>; + cci-clk-src = <37500000>; + status = "ok"; + }; + + i2c_freq_1Mhz_cci1: qcom,i2c_fast_plus_mode { + hw-thigh = <16>; + hw-tlow = <22>; + hw-tsu-sto = <17>; + hw-tsu-sta = <18>; + hw-thd-dat = <16>; + hw-thd-sta = <15>; + hw-tbuf = <24>; + hw-scl-stretch-en = <0>; + hw-trdhld = <3>; + hw-tsp = <3>; + cci-clk-src = <37500000>; + status = "ok"; + }; + }; + + qcom,cam_smmu { + compatible = "qcom,msm-cam-smmu"; + status = "ok"; + + msm_cam_smmu_ife { + compatible = "qcom,msm-cam-smmu-cb"; + iommus = <&apps_smmu 0x900 0x5E0>, + <&apps_smmu 0x880 0x5E0>, + <&apps_smmu 0x820 0x5E0>, + <&apps_smmu 0x920 0x5E0>, + <&apps_smmu 0x8A0 0x5E0>, + <&apps_smmu 0x940 0x5E0>, + <&apps_smmu 0x8C0 0x5E0>, + <&apps_smmu 0xD00 0x5E0>, + <&apps_smmu 0xC80 0x5E0>, + <&apps_smmu 0xC20 0x5E0>, + <&apps_smmu 0xD20 0x5E0>, + <&apps_smmu 0xCA0 0x5E0>, + <&apps_smmu 0xD40 0x5E0>, + <&apps_smmu 0xCC0 0x5E0>; + qcom,iommu-faults = "non-fatal"; + qcom,iommu-dma-addr-pool = <0x7400000 0xd8c00000>; + label = "ife"; + ife_iova_mem_map: iova-mem-map { + /* IO region is approximately 3.4 GB */ + iova-mem-region-io { + iova-region-name = "io"; + iova-region-start = <0x7400000>; + iova-region-len = <0xd8c00000>; + iova-region-id = <0x3>; + status = "ok"; + }; + }; + }; + + msm_cam_smmu_jpeg { + compatible = "qcom,msm-cam-smmu-cb"; + iommus = <&apps_smmu 0x1280 0x20>, + <&apps_smmu 0x12A0 0x20>; + label = "jpeg"; + qcom,iommu-faults = "non-fatal"; + qcom,iommu-dma-addr-pool = <0x7400000 0xd8c00000>; + jpeg_iova_mem_map: iova-mem-map { + /* IO region is approximately 3.4 GB */ + iova-mem-region-io { + iova-region-name = "io"; + iova-region-start = <0x7400000>; + iova-region-len = <0xd8c00000>; + iova-region-id = <0x3>; + status = "ok"; + }; + }; + }; + + msm_cam_icp_fw { + compatible = "qcom,msm-cam-smmu-fw-dev"; + label="icp"; + memory-region = <&pil_camera_mem>; + }; + + msm_cam_smmu_icp { + compatible = "qcom,msm-cam-smmu-cb"; + iommus = <&apps_smmu 0x1042 0x0>, + <&apps_smmu 0x11A0 0x0>, + <&apps_smmu 0x1220 0x0>, + <&apps_smmu 0x1300 0x20>, + <&apps_smmu 0x1320 0x20>, + <&apps_smmu 0x1180 0x0>, + <&apps_smmu 0x1200 0x0>, + <&apps_smmu 0x11E0 0x0>, + <&apps_smmu 0x1260 0x0>; + label = "icp"; + qcom,iommu-faults = "non-fatal"; + qcom,iommu-dma-addr-pool = <0xda00000 0xace00000>; + icp_iova_mem_map: iova-mem-map { + iova-mem-region-firmware { + /* Firmware region is 5MB */ + iova-region-name = "firmware"; + iova-region-start = <0x0>; + iova-region-len = <0x500000>; + iova-region-id = <0x0>; + status = "ok"; + }; + + iova-mem-region-shared { + /* Shared region is 150MB long */ + iova-region-name = "shared"; + iova-region-start = <0x7400000>; + iova-region-len = <0x9600000>; + iova-region-id = <0x1>; + status = "ok"; + }; + + iova-mem-region-secondary-heap { + /* Secondary heap region is 1MB long */ + iova-region-name = "secheap"; + iova-region-start = <0x10a00000>; + iova-region-len = <0x100000>; + iova-region-id = <0x4>; + status = "ok"; + }; + + iova-mem-region-io { + /* IO region is approximately 3.3 GB */ + iova-region-name = "io"; + iova-region-start = <0x10c00000>; + iova-region-len = <0xcf300000>; + iova-region-id = <0x3>; + status = "ok"; + }; + + iova-mem-qdss-region { + /* QDSS region is appropriate 1MB */ + iova-region-name = "qdss"; + iova-region-start = <0x10b00000>; + iova-region-len = <0x100000>; + iova-region-id = <0x5>; + qdss-phy-addr = <0x16790000>; + status = "ok"; + }; + }; + }; + + msm_cam_smmu_cpas_cdm { + compatible = "qcom,msm-cam-smmu-cb"; + iommus = <&apps_smmu 0x1000 0x0>; + label = "cpas-cdm0"; + qcom,iommu-faults = "non-fatal"; + qcom,iommu-dma-addr-pool = <0x7400000 0xd8c00000>; + cpas_cdm_iova_mem_map: iova-mem-map { + iova-mem-region-io { + /* IO region is approximately 3.4 GB */ + iova-region-name = "io"; + iova-region-start = <0x7400000>; + iova-region-len = <0xd8c00000>; + iova-region-id = <0x3>; + status = "ok"; + }; + }; + }; + + msm_cam_smmu_secure { + compatible = "qcom,msm-cam-smmu-cb"; + label = "cam-secure"; + qcom,secure-cb; + }; + + msm_cam_smmu_fd { + compatible = "qcom,msm-cam-smmu-cb"; + iommus = <&apps_smmu 0x12C0 0x20>, + <&apps_smmu 0x12E0 0x20>; + qcom,iommu-faults = "non-fatal"; + qcom,iommu-dma-addr-pool = <0x7400000 0xd8c00000>; + label = "fd"; + fd_iova_mem_map: iova-mem-map { + iova-mem-region-io { + /* IO region is approximately 3.4 GB */ + iova-region-name = "io"; + iova-region-start = <0x7400000>; + iova-region-len = <0xd8c00000>; + iova-region-id = <0x3>; + status = "ok"; + }; + }; + }; + + msm_cam_smmu_lrme { + compatible = "qcom,msm-cam-smmu-cb"; + iommus = <&apps_smmu 0x11C0 0x0>, + <&apps_smmu 0x1240 0x0>; + label = "lrme"; + qcom,iommu-faults = "non-fatal"; + qcom,iommu-dma-addr-pool = <0x7400000 0xd8c00000>; + lrme_iova_mem_map: iova-mem-map { + iova-mem-region-shared { + /* Shared region is 100MB long */ + iova-region-name = "shared"; + iova-region-start = <0x7400000>; + iova-region-len = <0x6400000>; + iova-region-id = <0x1>; + status = "ok"; + }; + /* IO region is approximately 3.3 GB */ + iova-mem-region-io { + iova-region-name = "io"; + iova-region-start = <0xd800000>; + iova-region-len = <0xd2800000>; + iova-region-id = <0x3>; + status = "ok"; + }; + }; + }; + }; + + qcom,cam-cdm-intf { + compatible = "qcom,cam-cdm-intf"; + cell-index = <0>; + label = "cam-cdm-intf"; + num-hw-cdm = <1>; + cdm-client-names = "vfe", + "jpegdma", + "jpegenc", + "fd", + "lrmecdm"; + status = "ok"; + }; + + qcom,cpas-cdm0 { + cell-index = <0>; + compatible = "qcom,cam170-cpas-cdm0"; + label = "cpas-cdm"; + reg = <0xac48000 0x1000>; + reg-names = "cpas-cdm"; + reg-cam-base = <0x48000>; + interrupts = <GIC_SPI 461 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "cpas-cdm"; + regulator-names = "camss"; + camss-supply = <&titan_top_gdsc>; + clock-names = "cam_cc_cpas_slow_ahb_clk", + "cam_cc_cpas_ahb_clk"; + clocks = <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_CPAS_AHB_CLK>; + clock-rates = <0 0>; + clock-cntl-level = "svs"; + cdm-client-names = "ife"; + status = "ok"; + }; + + qcom,cam-isp { + compatible = "qcom,cam-isp"; + arch-compat = "ife"; + status = "ok"; + }; + + cam_csid0: qcom,csid0 { + cell-index = <0>; + compatible = "qcom,csid175_200"; + reg-names = "csid"; + reg = <0xacb3000 0x1000>; + reg-cam-base = <0xb3000>; + interrupt-names = "csid"; + interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>; + regulator-names = "camss", "ife0"; + camss-supply = <&titan_top_gdsc>; + ife0-supply = <&ife_0_gdsc>; + clock-names = + "ife_csid_clk_src", + "ife_csid_clk", + "cphy_rx_clk_src", + "ife_cphy_rx_clk", + "ife_clk_src", + "ife_clk", + "ife_axi_clk"; + clocks = + <&camcc CAM_CC_IFE_0_CSID_CLK_SRC>, + <&camcc CAM_CC_IFE_0_CSID_CLK>, + <&camcc CAM_CC_CPHY_RX_CLK_SRC>, + <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_0_CLK_SRC>, + <&camcc CAM_CC_IFE_0_CLK>, + <&camcc CAM_CC_IFE_0_AXI_CLK>; + clock-rates = + <300000000 0 0 0 380000000 0 0>, + <384000000 0 0 0 510000000 0 0>, + <400000000 0 0 0 637000000 0 0>, + <400000000 0 0 0 760000000 0 0>; + clock-cntl-level = "lowsvs", "svs", "svs_l1", "turbo"; + src-clock-name = "ife_csid_clk_src"; + clock-control-debugfs = "true"; + status = "ok"; + }; + + cam_vfe0: qcom,vfe0 { + cell-index = <0>; + compatible = "qcom,vfe175_130"; + reg-names = "ife"; + reg = <0xacaf000 0x5200>; + reg-cam-base = <0xaf000>; + interrupt-names = "ife"; + interrupts = <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>; + regulator-names = "camss", "ife0"; + camss-supply = <&titan_top_gdsc>; + ife0-supply = <&ife_0_gdsc>; + clock-names = + "ife_clk_src", + "ife_clk", + "ife_axi_clk"; + clocks = + <&camcc CAM_CC_IFE_0_CLK_SRC>, + <&camcc CAM_CC_IFE_0_CLK>, + <&camcc CAM_CC_IFE_0_AXI_CLK>; + clock-rates = + <380000000 0 0>, + <510000000 0 0>, + <637000000 0 0>, + <760000000 0 0>; + clock-cntl-level = "lowsvs", "svs", "svs_l1", "turbo"; + src-clock-name = "ife_clk_src"; + clock-control-debugfs = "true"; + clock-names-option = "ife_dsp_clk"; + clocks-option = <&camcc CAM_CC_IFE_0_DSP_CLK>; + clock-rates-option = <760000000>; + status = "ok"; + }; + + cam_csid1: qcom,csid1 { + cell-index = <1>; + compatible = "qcom,csid175_200"; + reg-names = "csid"; + reg = <0xacba000 0x1000>; + reg-cam-base = <0xba000>; + interrupt-names = "csid"; + interrupts = <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>; + regulator-names = "camss", "ife1"; + camss-supply = <&titan_top_gdsc>; + ife1-supply = <&ife_1_gdsc>; + clock-names = + "ife_csid_clk_src", + "ife_csid_clk", + "cphy_rx_clk_src", + "ife_cphy_rx_clk", + "ife_clk_src", + "ife_clk", + "ife_axi_clk"; + clocks = + <&camcc CAM_CC_IFE_1_CSID_CLK_SRC>, + <&camcc CAM_CC_IFE_1_CSID_CLK>, + <&camcc CAM_CC_CPHY_RX_CLK_SRC>, + <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_1_CLK_SRC>, + <&camcc CAM_CC_IFE_1_CLK>, + <&camcc CAM_CC_IFE_1_AXI_CLK>; + clock-rates = + <300000000 0 0 0 380000000 0 0>, + <384000000 0 0 0 510000000 0 0>, + <400000000 0 0 0 637000000 0 0>, + <400000000 0 0 0 760000000 0 0>; + clock-cntl-level = "lowsvs", "svs", "svs_l1", "turbo"; + src-clock-name = "ife_csid_clk_src"; + clock-control-debugfs = "true"; + status = "ok"; + }; + + cam_vfe1: qcom,vfe1 { + cell-index = <1>; + compatible = "qcom,vfe175_130"; + reg-names = "ife"; + reg = <0xacb6000 0x5200>; + reg-cam-base = <0xb6000>; + interrupt-names = "ife"; + interrupts = <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>; + regulator-names = "camss", "ife1"; + camss-supply = <&titan_top_gdsc>; + ife1-supply = <&ife_1_gdsc>; + clock-names = + "ife_clk_src", + "ife_clk", + "ife_axi_clk"; + clocks = + <&camcc CAM_CC_IFE_1_CLK_SRC>, + <&camcc CAM_CC_IFE_1_CLK>, + <&camcc CAM_CC_IFE_1_AXI_CLK>; + clock-rates = + <380000000 0 0>, + <510000000 0 0>, + <637000000 0 0>, + <760000000 0 0>; + clock-cntl-level = "lowsvs", "svs", "svs_l1", "turbo"; + src-clock-name = "ife_clk_src"; + clock-control-debugfs = "true"; + clock-names-option = "ife_dsp_clk"; + clocks-option = <&camcc CAM_CC_IFE_1_DSP_CLK>; + clock-rates-option = <760000000>; + status = "ok"; + }; + + cam_csid_lite0: qcom,csid-lite0 { + cell-index = <2>; + compatible = "qcom,csid-lite175"; + reg-names = "csid-lite"; + reg = <0xacc8000 0x1000>; + reg-cam-base = <0xc8000>; + interrupt-names = "csid-lite"; + interrupts = <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>; + regulator-names = "camss"; + camss-supply = <&titan_top_gdsc>; + clock-names = + "ife_csid_clk_src", + "ife_csid_clk", + "cphy_rx_clk_src", + "ife_cphy_rx_clk", + "ife_clk_src", + "ife_clk"; + clocks = + <&camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>, + <&camcc CAM_CC_IFE_LITE_CSID_CLK>, + <&camcc CAM_CC_CPHY_RX_CLK_SRC>, + <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_LITE_CLK_SRC>, + <&camcc CAM_CC_IFE_LITE_CLK>; + clock-rates = + <300000000 0 0 0 320000000 0>, + <384000000 0 0 0 400000000 0>, + <400000000 0 0 0 480000000 0>, + <400000000 0 0 0 600000000 0>; + clock-cntl-level = "lowsvs", "svs", "svs_l1", "turbo"; + src-clock-name = "ife_csid_clk_src"; + clock-control-debugfs = "true"; + status = "ok"; + }; + + cam_vfe_lite0: qcom,vfe-lite0 { + cell-index = <2>; + compatible = "qcom,vfe-lite175"; + reg-names = "ife-lite"; + reg = <0xacc4000 0x4000>; + reg-cam-base = <0xc4000>; + interrupt-names = "ife-lite"; + interrupts = <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>; + regulator-names = "camss"; + camss-supply = <&titan_top_gdsc>; + clock-names = + "ife_clk_src", + "ife_clk"; + clocks = + <&camcc CAM_CC_IFE_LITE_CLK_SRC>, + <&camcc CAM_CC_IFE_LITE_CLK>; + clock-rates = + <320000000 0>, + <400000000 0>, + <480000000 0>, + <600000000 0>; + clock-cntl-level = "lowsvs", "svs", "svs_l1", "turbo"; + src-clock-name = "ife_clk_src"; + clock-control-debugfs = "true"; + status = "ok"; + }; + + qcom,cam-icp { + compatible = "qcom,cam-icp"; + compat-hw-name = "qcom,a5", + "qcom,ipe0", + "qcom,ipe1", + "qcom,bps"; + num-a5 = <1>; + num-ipe = <2>; + num-bps = <1>; + icp_pc_en; + status = "ok"; + }; + + cam_a5: qcom,a5 { + cell-index = <0>; + compatible = "qcom,cam-a5"; + reg = <0xac00000 0x6000>, + <0xac10000 0x8000>, + <0xac18000 0x3000>; + reg-names = "a5_qgic", "a5_sierra", "a5_csr"; + reg-cam-base = <0x00000 0x10000 0x18000>; + interrupts = <GIC_SPI 463 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "a5"; + regulator-names = "camss-vdd"; + camss-vdd-supply = <&titan_top_gdsc>; + clock-names = + "soc_fast_ahb", + "icp_ahb_clk", + "icp_clk_src", + "icp_clk"; + src-clock-name = "icp_clk_src"; + clocks = + <&camcc CAM_CC_FAST_AHB_CLK_SRC>, + <&camcc CAM_CC_ICP_AHB_CLK>, + <&camcc CAM_CC_ICP_CLK_SRC>, + <&camcc CAM_CC_ICP_CLK>; + + clock-rates = + <100000000 0 400000000 0>, + <200000000 0 480000000 0>, + <300000000 0 600000000 0>, + <400000000 0 600000000 0>, + <400000000 0 600000000 0>; + clock-cntl-level = "lowsvs", "svs", "svs_l1", + "nominal", "turbo"; + fw_name = "CAMERA_ICP.elf"; + ubwc-cfg = <0x1073 0x101CF>; + qos-val = <0x00000A0A>; + status = "ok"; + }; + + cam_ipe0: qcom,ipe0 { + cell-index = <0>; + compatible = "qcom,cam-ipe"; + reg = <0xac87000 0x3000>; + reg-names = "ipe0_top"; + reg-cam-base = <0x87000>; + regulator-names = "ipe0-vdd"; + ipe0-vdd-supply = <&ipe_0_gdsc>; + clock-names = + "ipe_0_ahb_clk", + "ipe_0_areg_clk", + "ipe_0_axi_clk", + "ipe_0_clk_src", + "ipe_0_clk"; + src-clock-name = "ipe_0_clk_src"; + clock-control-debugfs = "true"; + clocks = + <&camcc CAM_CC_IPE_0_AHB_CLK>, + <&camcc CAM_CC_IPE_0_AREG_CLK>, + <&camcc CAM_CC_IPE_0_AXI_CLK>, + <&camcc CAM_CC_IPE_0_CLK_SRC>, + <&camcc CAM_CC_IPE_0_CLK>; + + clock-rates = + <0 0 0 300000000 0>, + <0 0 0 430000000 0>, + <0 0 0 520000000 0>, + <0 0 0 600000000 0>, + <0 0 0 600000000 0>; + clock-cntl-level = "lowsvs", "svs", "svs_l1", + "nominal", "turbo"; + status = "ok"; + }; + + cam_ipe1: qcom,ipe1 { + cell-index = <1>; + compatible = "qcom,cam-ipe"; + reg = <0xac91000 0x3000>; + reg-names = "ipe1_top"; + reg-cam-base = <0x91000>; + regulator-names = "ipe1-vdd"; + ipe1-vdd-supply = <&ipe_1_gdsc>; + clock-names = + "ipe_1_ahb_clk", + "ipe_1_areg_clk", + "ipe_1_axi_clk", + "ipe_1_clk_src", + "ipe_1_clk"; + src-clock-name = "ipe_1_clk_src"; + clock-control-debugfs = "true"; + clocks = + <&camcc CAM_CC_IPE_1_AHB_CLK>, + <&camcc CAM_CC_IPE_1_AREG_CLK>, + <&camcc CAM_CC_IPE_1_AXI_CLK>, + <&camcc CAM_CC_IPE_0_CLK_SRC>, + <&camcc CAM_CC_IPE_1_CLK>; + + clock-rates = + <0 0 0 300000000 0>, + <0 0 0 430000000 0>, + <0 0 0 520000000 0>, + <0 0 0 600000000 0>, + <0 0 0 600000000 0>; + clock-cntl-level = "lowsvs", "svs", "svs_l1", + "nominal", "turbo"; + status = "ok"; + }; + + cam_bps: qcom,bps { + cell-index = <0>; + compatible = "qcom,cam-bps"; + reg = <0xac6f000 0x3000>; + reg-names = "bps_top"; + reg-cam-base = <0x6f000>; + regulator-names = "bps-vdd"; + bps-vdd-supply = <&bps_gdsc>; + clock-names = + "bps_ahb_clk", + "bps_areg_clk", + "bps_axi_clk", + "bps_clk_src", + "bps_clk"; + src-clock-name = "bps_clk_src"; + clock-control-debugfs = "true"; + clocks = + <&camcc CAM_CC_BPS_AHB_CLK>, + <&camcc CAM_CC_BPS_AREG_CLK>, + <&camcc CAM_CC_BPS_AXI_CLK>, + <&camcc CAM_CC_BPS_CLK_SRC>, + <&camcc CAM_CC_BPS_CLK>; + + clock-rates = + <0 0 0 200000000 0>, + <0 0 0 400000000 0>, + <0 0 0 480000000 0>, + <0 0 0 600000000 0>, + <0 0 0 600000000 0>; + clock-cntl-level = "lowsvs", "svs", "svs_l1", + "nominal", "turbo"; + status = "ok"; + }; + + qcom,cam-jpeg { + compatible = "qcom,cam-jpeg"; + compat-hw-name = "qcom,jpegenc", + "qcom,jpegdma"; + num-jpeg-enc = <1>; + num-jpeg-dma = <1>; + status = "ok"; + }; + + cam_jpeg_enc: qcom,jpegenc { + cell-index = <0>; + compatible = "qcom,cam_jpeg_enc"; + reg-names = "jpege_hw"; + reg = <0xac4e000 0x4000>; + reg-cam-base = <0x4e000>; + interrupt-names = "jpeg"; + interrupts = <GIC_SPI 474 IRQ_TYPE_EDGE_RISING>; + regulator-names = "camss-vdd"; + camss-vdd-supply = <&titan_top_gdsc>; + clock-names = + "jpegenc_clk_src", + "jpegenc_clk"; + clocks = + <&camcc CAM_CC_JPEG_CLK_SRC>, + <&camcc CAM_CC_JPEG_CLK>; + + clock-rates = <600000000 0>; + src-clock-name = "jpegenc_clk_src"; + clock-cntl-level = "nominal"; + status = "ok"; + }; + + cam_jpeg_dma: qcom,jpegdma { + cell-index = <0>; + compatible = "qcom,cam_jpeg_dma"; + reg-names = "jpegdma_hw"; + reg = <0xac52000 0x4000>; + reg-cam-base = <0x52000>; + interrupt-names = "jpegdma"; + interrupts = <GIC_SPI 475 IRQ_TYPE_EDGE_RISING>; + regulator-names = "camss-vdd"; + camss-vdd-supply = <&titan_top_gdsc>; + clock-names = + "jpegdma_clk_src", + "jpegdma_clk"; + clocks = + <&camcc CAM_CC_JPEG_CLK_SRC>, + <&camcc CAM_CC_JPEG_CLK>; + + clock-rates = <600000000 0>; + src-clock-name = "jpegdma_clk_src"; + clock-cntl-level = "nominal"; + status = "ok"; + }; + + qcom,cam-fd { + compatible = "qcom,cam-fd"; + compat-hw-name = "qcom,fd"; + num-fd = <1>; + status = "ok"; + }; + + cam_fd: qcom,fd { + cell-index = <0>; + compatible = "qcom,fd501"; + reg-names = "fd_core", "fd_wrapper"; + reg = <0xac5a000 0x1000>, + <0xac5b000 0x400>; + reg-cam-base = <0x5a000 0x5b000>; + interrupt-names = "fd"; + interrupts = <GIC_SPI 462 IRQ_TYPE_EDGE_RISING>; + regulator-names = "camss-vdd"; + camss-vdd-supply = <&titan_top_gdsc>; + clock-names = + "fd_core_clk_src", + "fd_core_clk", + "fd_core_uar_clk"; + clocks = + <&camcc CAM_CC_FD_CORE_CLK_SRC>, + <&camcc CAM_CC_FD_CORE_CLK>, + <&camcc CAM_CC_FD_CORE_UAR_CLK>; + src-clock-name = "fd_core_clk_src"; + clock-control-debugfs = "true"; + clock-cntl-level = "lowsvs", "svs", "svs_l1", "nominal"; + clock-rates = + <380000000 0 0>, + <384000000 0 0>, + <480000000 0 0>, + <600000000 0 0>; + status = "ok"; + qcom,msm-bus,name = "fd_core"; + }; + + qcom,cam-lrme { + compatible = "qcom,cam-lrme"; + arch-compat = "lrme"; + status = "ok"; + }; + + cam_lrme: qcom,lrme { + cell-index = <0>; + compatible = "qcom,lrme"; + reg-names = "lrme"; + reg = <0xac6b000 0xa00>; + reg-cam-base = <0x6b000>; + interrupt-names = "lrme"; + interrupts = <GIC_SPI 476 IRQ_TYPE_EDGE_RISING>; + regulator-names = "camss"; + camss-supply = <&titan_top_gdsc>; + clock-names = "lrme_clk_src", + "lrme_clk"; + clocks = <&camcc CAM_CC_LRME_CLK_SRC>, + <&camcc CAM_CC_LRME_CLK>; + clock-rates = <240000000 240000000>, + <300000000 300000000>, + <320000000 320000000>, + <400000000 400000000>, + <400000000 400000000>; + clock-cntl-level = "lowsvs", "svs", "svs_l1", "nominal", + "turbo"; + src-clock-name = "lrme_clk_src"; + status = "ok"; + }; + + qcom,cam-cpas { + cell-index = <0>; + compatible = "qcom,cam-cpas"; + label = "cpas"; + arch-compat = "cpas_top"; + status = "ok"; + reg-names = "cam_cpas_top", "cam_camnoc"; + reg = <0xac40000 0x1000>, + <0xac42000 0x6000>; + reg-cam-base = <0x40000 0x42000>; + cam_hw_fuse = <CAM_CPAS_QCFA_BINNING_ENABLE 0x00780210 29>, + <CAM_CPAS_SECURE_CAMERA_ENABLE 0x00780210 18>; + interrupt-names = "cpas_camnoc"; + interrupts = <GIC_SPI 459 IRQ_TYPE_EDGE_RISING>; + camnoc-axi-min-ib-bw = <3000000000>; + regulator-names = "camss-vdd"; + camss-vdd-supply = <&titan_top_gdsc>; + clock-names = + "gcc_ahb_clk", + "gcc_axi_hf_clk", + "gcc_axi_sf_clk", + "slow_ahb_clk_src", + "cpas_ahb_clk", + "camnoc_axi_clk_src", + "camnoc_axi_clk"; + clocks = + <&gcc GCC_CAMERA_AHB_CLK>, + <&gcc GCC_CAMERA_HF_AXI_CLK>, + <&gcc GCC_CAMERA_SF_AXI_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CAMNOC_AXI_CLK_SRC>, + <&camcc CAM_CC_CAMNOC_AXI_CLK>; + src-clock-name = "camnoc_axi_clk_src"; + clock-rates = + <0 0 0 0 0 0 0>, + <0 0 0 80000000 0 150000000 0>, + <0 0 0 80000000 0 240000000 0>, + <0 0 0 80000000 0 320000000 0>, + <0 0 0 80000000 0 400000000 0>, + <0 0 0 80000000 0 400000000 0>, + <0 0 0 80000000 0 480000000 0>; + clock-cntl-level = "suspend", "lowsvs", "svs", + "svs_l1", "nominal", "nominal_l1", "turbo"; + control-camnoc-axi-clk; + camnoc-bus-width = <32>; + camnoc-axi-clk-bw-margin-perc = <20>; + qcom,msm-bus,name = "cam_ahb"; + qcom,msm-bus,num-cases = <8>; + qcom,msm-bus,num-paths = <1>; + qcom,msm-bus,vectors-KBps = + <MSM_BUS_MASTER_AMPSS_M0 + MSM_BUS_SLAVE_CAMERA_CFG 0 0>, + <MSM_BUS_MASTER_AMPSS_M0 + MSM_BUS_SLAVE_CAMERA_CFG 0 65000>, + <MSM_BUS_MASTER_AMPSS_M0 + MSM_BUS_SLAVE_CAMERA_CFG 0 125000>, + <MSM_BUS_MASTER_AMPSS_M0 + MSM_BUS_SLAVE_CAMERA_CFG 0 125000>, + <MSM_BUS_MASTER_AMPSS_M0 + MSM_BUS_SLAVE_CAMERA_CFG 0 250000>, + <MSM_BUS_MASTER_AMPSS_M0 + MSM_BUS_SLAVE_CAMERA_CFG 0 250000>, + <MSM_BUS_MASTER_AMPSS_M0 + MSM_BUS_SLAVE_CAMERA_CFG 0 250000>, + <MSM_BUS_MASTER_AMPSS_M0 + MSM_BUS_SLAVE_CAMERA_CFG 0 250000>; + vdd-corners = <RPMH_REGULATOR_LEVEL_RETENTION + RPMH_REGULATOR_LEVEL_MIN_SVS + RPMH_REGULATOR_LEVEL_LOW_SVS + RPMH_REGULATOR_LEVEL_SVS + RPMH_REGULATOR_LEVEL_SVS_L1 + RPMH_REGULATOR_LEVEL_NOM + RPMH_REGULATOR_LEVEL_NOM_L1 + RPMH_REGULATOR_LEVEL_NOM_L2 + RPMH_REGULATOR_LEVEL_TURBO + RPMH_REGULATOR_LEVEL_TURBO_L1>; + vdd-corner-ahb-mapping = "suspend", + "minsvs", "lowsvs", "svs", "svs_l1", + "nominal", "nominal", "nominal", + "turbo", "turbo"; + client-id-based; + client-names = + "csiphy0", "csiphy1", "csiphy2", "csiphy3", + "cci0", "cci1", + "csid0", "csid1", "csid2", + "ife0", "ife1", "ife2", + "ipe0", "ipe1", "cam-cdm-intf0", "cpas-cdm0", + "bps0", "icp0", "jpeg-dma0", "jpeg-enc0", + "fd0", "lrmecpas0"; + camera-bus-nodes { + level3-nodes { + level-index = <3>; + level3_rt0_wr_sum: level3-rt0-wr-sum { + cell-index = <0>; + node-name = "level3-rt0-wr-sum"; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM>; + qcom,axi-port-name = "cam_hf_3"; + ib-bw-voting-needed; + qcom,axi-port-mnoc { + qcom,msm-bus,name = + "cam_hf_3_mnoc"; + qcom,msm-bus-vector-dyn-vote; + qcom,msm-bus,num-cases = <2>; + qcom,msm-bus,num-paths = <1>; + qcom,msm-bus,vectors-KBps = + <MSM_BUS_MASTER_CAMNOC_HF1 + MSM_BUS_SLAVE_EBI_CH0 0 0>, + <MSM_BUS_MASTER_CAMNOC_HF1 + MSM_BUS_SLAVE_EBI_CH0 0 0>; + }; + }; + + level3_rt1_rd_wr_sum: level3-rt1-rd-wr-sum { + cell-index = <1>; + node-name = "level3-rt1-rd-wr-sum"; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM>; + qcom,axi-port-name = "cam_hf_1"; + ib-bw-voting-needed; + qcom,axi-port-mnoc { + qcom,msm-bus,name = + "cam_hf_1_mnoc"; + qcom,msm-bus-vector-dyn-vote; + qcom,msm-bus,num-cases = <2>; + qcom,msm-bus,num-paths = <1>; + qcom,msm-bus,vectors-KBps = + <MSM_BUS_MASTER_CAMNOC_HF0 + MSM_BUS_SLAVE_EBI_CH0 0 0>, + <MSM_BUS_MASTER_CAMNOC_HF0 + MSM_BUS_SLAVE_EBI_CH0 0 0>; + }; + }; + + level3_nrt0_rd_wr_sum: level3-nrt0-rd-wr-sum { + cell-index = <2>; + node-name = "level3-nrt0-rd-wr-sum"; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM>; + qcom,axi-port-name = "cam_sf_0"; + qcom,axi-port-mnoc { + qcom,msm-bus,name = + "cam_sf_0_mnoc"; + qcom,msm-bus-vector-dyn-vote; + qcom,msm-bus,num-cases = <2>; + qcom,msm-bus,num-paths = <1>; + qcom,msm-bus,vectors-KBps = + <MSM_BUS_MASTER_CAMNOC_SF + MSM_BUS_SLAVE_EBI_CH0 0 0>, + <MSM_BUS_MASTER_CAMNOC_SF + MSM_BUS_SLAVE_EBI_CH0 0 0>; + }; + }; + + level3_nrt1_rd_sum: level3-nrt1-rd-sum { + cell-index = <3>; + node-name = "level3-nrt1-rd-sum"; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM>; + qcom,axi-port-name = "cam_sf_icp"; + qcom,axi-port-mnoc { + qcom,msm-bus,name = + "cam_hf_4_mnoc"; + qcom,msm-bus-vector-dyn-vote; + qcom,msm-bus,num-cases = <2>; + qcom,msm-bus,num-paths = <1>; + qcom,msm-bus,vectors-KBps = + <MSM_BUS_MASTER_CAMNOC_ICP + MSM_BUS_SLAVE_EBI_CH0 0 0>, + <MSM_BUS_MASTER_CAMNOC_ICP + MSM_BUS_SLAVE_EBI_CH0 0 0>; + }; + }; + }; + + level2-nodes { + level-index = <2>; + camnoc-max-needed; + level2_rt0_write0: level2-rt0-write0 { + cell-index = <4>; + node-name = "level2-rt0-write0"; + parent-node = <&level3_rt0_wr_sum>; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM>; + }; + + level2_rt1_read0: level2-rt1-read0 { + cell-index = <5>; + node-name = "level2-rt1-read0"; + parent-node = <&level3_rt1_rd_wr_sum>; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM_INTERLEAVE>; + }; + + level2_rt1_write0: level2-rt1-write0 { + cell-index = <6>; + node-name = "level2-rt1-write0"; + parent-node = <&level3_rt1_rd_wr_sum>; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM_INTERLEAVE>; + }; + + level2_nrt0_write0: level2-nrt0-write0 { + cell-index = <7>; + node-name = "level2-nrt0-write0"; + parent-node = <&level3_nrt0_rd_wr_sum>; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM>; + }; + + level2_nrt0_read0: level2-nrt0-read0 { + cell-index = <8>; + node-name = "level2-nrt0-read0"; + parent-node = <&level3_nrt0_rd_wr_sum>; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM>; + }; + + level2_nrt1_read0: level2-nrt1-read0 { + cell-index = <9>; + node-name = "level2-nrt1-read0"; + parent-node = <&level3_nrt1_rd_sum>; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM>; + bus-width-factor = <4>; + }; + }; + + level1-nodes { + level-index = <1>; + camnoc-max-needed; + level1_rt0_write0: level1-rt0-write0 { + cell-index = <10>; + node-name = "level1-rt0-write0"; + parent-node = <&level2_rt0_write0>; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM>; + }; + + level1_rt1_write0: level1-rt1-write0 { + cell-index = <11>; + node-name = "level1-rt1-write0"; + parent-node = <&level2_rt1_write0>; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM>; + }; + + level1_rt1_read0: level1-rt1-read0 { + cell-index = <12>; + node-name = "level1-rt1-read0"; + parent-node = <&level2_rt1_read0>; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM>; + }; + + level1_rt1_write1: level1-rt1-write1 { + cell-index = <13>; + node-name = "level1-rt1-write1"; + parent-node = <&level2_rt1_write0>; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM>; + }; + + level1_nrt0_write0: level1-nrt0-write0 { + cell-index = <14>; + node-name = "level1-nrt0-write0"; + parent-node = <&level2_nrt0_write0>; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM>; + }; + + level1_nrt0_write1: level1-nrt0-write1 { + cell-index = <15>; + node-name = "level1-nrt0-write1"; + parent-node = <&level2_nrt0_write0>; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM>; + }; + + level1_nrt0_read0: level1-nrt0-read0 { + cell-index = <16>; + node-name = "level1-nrt0-read0"; + parent-node = <&level2_nrt0_read0>; + traffic-merge-type = + <CAM_CPAS_TRAFFIC_MERGE_SUM>; + }; + }; + + level0-nodes { + level-index = <0>; + cpas_cdm0_all_rd: cpas-cdm0-all-rd { + cell-index = <17>; + node-name = "cpas-cdm0-all-rd"; + client-name = "cpas-cdm0"; + traffic-data = <CAM_CPAS_PATH_DATA_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_READ>; + parent-node = <&level2_nrt0_read0>; + }; + + fd0_all_wr: fd0-all-wr { + cell-index = <18>; + node-name = "fd0-all-wr"; + client-name = "fd0"; + traffic-data = <CAM_CPAS_PATH_DATA_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_WRITE>; + parent-node = <&level2_nrt0_write0>; + }; + + fd0_all_rd: fd0-all-rd { + cell-index = <19>; + node-name = "fd0-all-rd"; + client-name = "fd0"; + traffic-data = <CAM_CPAS_PATH_DATA_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_READ>; + parent-node = <&level2_nrt0_read0>; + }; + + ife0_pixelall_wr: ife0-pixelall-wr { + cell-index = <20>; + node-name = "ife0-pixelall-wr"; + client-name = "ife0"; + traffic-data = + <CAM_CPAS_PATH_DATA_IFE_PIXEL_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_WRITE>; + constituent-paths = + <CAM_CPAS_PATH_DATA_IFE_LINEAR + CAM_CPAS_PATH_DATA_IFE_PDAF + CAM_CPAS_PATH_DATA_IFE_VID + CAM_CPAS_PATH_DATA_IFE_DISP + CAM_CPAS_PATH_DATA_IFE_STATS + CAM_CPAS_PATH_DATA_IFE_PIXEL_RAW>; + parent-node = <&level1_rt1_write0>; + }; + + ife1_rdi_wr: ife1-rdi-wr { + cell-index = <21>; + node-name = "ife1-rdi-wr"; + client-name = "ife1"; + traffic-data = + <CAM_CPAS_PATH_DATA_IFE_RDI_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_WRITE>; + constituent-paths = + <CAM_CPAS_PATH_DATA_IFE_RDI0 + CAM_CPAS_PATH_DATA_IFE_RDI1 + CAM_CPAS_PATH_DATA_IFE_RDI2 + CAM_CPAS_PATH_DATA_IFE_RDI3>; + parent-node = <&level1_rt0_write0>; + }; + + ife0_rdi_wr: ife0-rdi-wr { + cell-index = <22>; + node-name = "ife0-rdi-wr"; + client-name = "ife0"; + traffic-data = + <CAM_CPAS_PATH_DATA_IFE_RDI_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_WRITE>; + constituent-paths = + <CAM_CPAS_PATH_DATA_IFE_RDI0 + CAM_CPAS_PATH_DATA_IFE_RDI1 + CAM_CPAS_PATH_DATA_IFE_RDI2 + CAM_CPAS_PATH_DATA_IFE_RDI3>; + parent-node = <&level1_rt0_write0>; + }; + + ife2_rdi_wr: ife2-rdi-wr { + cell-index = <23>; + node-name = "ife2-rdi-wr"; + client-name = "ife2"; + traffic-data = + <CAM_CPAS_PATH_DATA_IFE_RDI_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_WRITE>; + constituent-paths = + <CAM_CPAS_PATH_DATA_IFE_RDI0 + CAM_CPAS_PATH_DATA_IFE_RDI1 + CAM_CPAS_PATH_DATA_IFE_RDI2 + CAM_CPAS_PATH_DATA_IFE_RDI3>; + parent-node = <&level1_rt0_write0>; + }; + + ife1_rdi_rd: ife1-rdi-rd { + cell-index = <24>; + node-name = "ife1-rdi-rd"; + client-name = "ife1"; + traffic-data = + <CAM_CPAS_PATH_DATA_IFE_RDI_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_READ>; + constituent-paths = + <CAM_CPAS_PATH_DATA_IFE_RDI0 + CAM_CPAS_PATH_DATA_IFE_RDI1 + CAM_CPAS_PATH_DATA_IFE_RDI2 + CAM_CPAS_PATH_DATA_IFE_RDI3>; + parent-node = <&level1_rt1_read0>; + }; + + ife0_rdi_rd: ife0-rdi-rd { + cell-index = <25>; + node-name = "ife0-rdi-rd"; + client-name = "ife0"; + traffic-data = + <CAM_CPAS_PATH_DATA_IFE_RDI_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_READ>; + constituent-paths = + <CAM_CPAS_PATH_DATA_IFE_RDI0 + CAM_CPAS_PATH_DATA_IFE_RDI1 + CAM_CPAS_PATH_DATA_IFE_RDI2 + CAM_CPAS_PATH_DATA_IFE_RDI3>; + parent-node = <&level1_rt1_read0>; + }; + + ife1_pixelall_wr: ife1-pixelall-wr { + cell-index = <26>; + node-name = "ife1-pixelall-wr"; + client-name = "ife1"; + traffic-data = + <CAM_CPAS_PATH_DATA_IFE_PIXEL_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_WRITE>; + constituent-paths = + <CAM_CPAS_PATH_DATA_IFE_LINEAR + CAM_CPAS_PATH_DATA_IFE_PDAF + CAM_CPAS_PATH_DATA_IFE_VID + CAM_CPAS_PATH_DATA_IFE_DISP + CAM_CPAS_PATH_DATA_IFE_STATS + CAM_CPAS_PATH_DATA_IFE_PIXEL_RAW>; + parent-node = <&level1_rt1_write1>; + }; + + bps0_all_rd: bps0-all-rd { + cell-index = <27>; + node-name = "bps0-all-rd"; + client-name = "bps0"; + traffic-data = <CAM_CPAS_PATH_DATA_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_READ>; + parent-node = <&level1_nrt0_read0>; + }; + + ipe0_all_rd: ipe0-all-rd { + cell-index = <28>; + node-name = "ipe0-all-rd"; + client-name = "ipe0"; + traffic-data = <CAM_CPAS_PATH_DATA_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_READ>; + constituent-paths = + <CAM_CPAS_PATH_DATA_IPE_RD_IN + CAM_CPAS_PATH_DATA_IPE_RD_REF>; + parent-node = <&level1_nrt0_read0>; + }; + + ipe1_all_rd: ipe1-all-rd { + cell-index = <29>; + node-name = "ipe1-all-rd"; + client-name = "ipe1"; + traffic-data = <CAM_CPAS_PATH_DATA_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_READ>; + constituent-paths = + <CAM_CPAS_PATH_DATA_IPE_RD_IN + CAM_CPAS_PATH_DATA_IPE_RD_REF>; + parent-node = <&level1_nrt0_read0>; + }; + + lrme0_all_rd: lrme0-all-rd { + cell-index = <30>; + node-name = "lrme0-all-rd"; + client-name = "lrmecpas0"; + traffic-data = <CAM_CPAS_PATH_DATA_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_READ>; + parent-node = <&level1_nrt0_read0>; + }; + + bps0_all_wr: bps0-all-wr { + cell-index = <31>; + node-name = "bps0-all-wr"; + client-name = "bps0"; + traffic-data = <CAM_CPAS_PATH_DATA_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_WRITE>; + parent-node = <&level1_nrt0_write0>; + }; + + ipe0_ref_wr: ipe0-ref-wr { + cell-index = <32>; + node-name = "ipe0-ref-wr"; + client-name = "ipe0"; + traffic-data = + <CAM_CPAS_PATH_DATA_IPE_WR_REF>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_WRITE>; + parent-node = <&level1_nrt0_write0>; + }; + + ipe1_ref_wr: ipe1-ref-wr { + cell-index = <33>; + node-name = "ipe1-ref-wr"; + client-name = "ipe1"; + traffic-data = + <CAM_CPAS_PATH_DATA_IPE_WR_REF>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_WRITE>; + parent-node = <&level1_nrt0_write0>; + }; + + lrme0_all_wr: lrme0-all-wr { + cell-index = <34>; + node-name = "lrme0-all-wr"; + client-name = "lrmecpas0"; + traffic-data = <CAM_CPAS_PATH_DATA_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_WRITE>; + parent-node = <&level1_nrt0_write0>; + }; + + ipe1_viddisp_wr: ipe1-viddisp-wr { + cell-index = <35>; + node-name = "ipe1-viddisp-wr"; + client-name = "ipe1"; + traffic-data = + <CAM_CPAS_PATH_DATA_IPE_WR_VID_DISP>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_WRITE>; + constituent-paths = + <CAM_CPAS_PATH_DATA_IPE_WR_VID + CAM_CPAS_PATH_DATA_IPE_WR_DISP>; + parent-node = <&level1_nrt0_write1>; + }; + + ipe0_viddisp_wr: ipe0-viddisp-wr { + cell-index = <36>; + node-name = "ipe0-viddisp-wr"; + client-name = "ipe0"; + traffic-data = + <CAM_CPAS_PATH_DATA_IPE_WR_VID_DISP>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_WRITE>; + constituent-paths = + <CAM_CPAS_PATH_DATA_IPE_WR_VID + CAM_CPAS_PATH_DATA_IPE_WR_DISP>; + parent-node = <&level1_nrt0_write1>; + }; + + jpeg0_all_wr: jpeg0-all-wr { + cell-index = <37>; + node-name = "jpeg0-all-wr"; + client-name = "jpeg-enc0"; + traffic-data = <CAM_CPAS_PATH_DATA_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_WRITE>; + parent-node = <&level2_nrt0_write0>; + }; + + jpeg0_all_rd: jpeg0-all-rd { + cell-index = <38>; + node-name = "jpeg0-all-rd"; + client-name = "jpeg-enc0"; + traffic-data = <CAM_CPAS_PATH_DATA_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_READ>; + parent-node = <&level2_nrt0_read0>; + }; + + icp0_all_rd: icp0-all-rd { + cell-index = <39>; + node-name = "icp0-all-rd"; + client-name = "icp0"; + traffic-data = <CAM_CPAS_PATH_DATA_ALL>; + traffic-transaction-type = + <CAM_CPAS_TRANSACTION_READ>; + parent-node = <&level2_nrt1_read0>; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/bindings/dpu.txt b/arch/arm64/boot/dts/vendor/qcom/display/bindings/dpu.txt new file mode 100644 index 000000000000..ad2e8830324e --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/bindings/dpu.txt @@ -0,0 +1,131 @@ +Qualcomm Technologies, Inc. DPU KMS + +Description: + +Device tree bindings for MSM Mobile Display Subsytem(MDSS) that encapsulates +sub-blocks like DPU display controller, DSI and DP interfaces etc. +The DPU display controller is found in SDM845 SoC. + +MDSS: +Required properties: +- compatible: "qcom,sdm845-mdss" +- reg: physical base address and length of contoller's registers. +- reg-names: register region names. The following region is required: + * "mdss" +- power-domains: a power domain consumer specifier according to + Documentation/devicetree/bindings/power/power_domain.txt +- clocks: list of clock specifiers for clocks needed by the device. +- clock-names: device clock names, must be in same order as clocks property. + The following clocks are required: + * "iface" + * "bus" + * "core" +- interrupts: interrupt signal from MDSS. +- interrupt-controller: identifies the node as an interrupt controller. +- #interrupt-cells: specifies the number of cells needed to encode an interrupt + source, should be 1. +- iommus: phandle of iommu device node. +- #address-cells: number of address cells for the MDSS children. Should be 1. +- #size-cells: Should be 1. +- ranges: parent bus address space is the same as the child bus address space. + +Optional properties: +- assigned-clocks: list of clock specifiers for clocks needing rate assignment +- assigned-clock-rates: list of clock frequencies sorted in the same order as + the assigned-clocks property. + +MDP: +Required properties: +- compatible: "qcom,sdm845-dpu" +- reg: physical base address and length of controller's registers. +- reg-names : register region names. The following region is required: + * "mdp" + * "vbif" +- clocks: list of clock specifiers for clocks needed by the device. +- clock-names: device clock names, must be in same order as clocks property. + The following clocks are required. + * "bus" + * "iface" + * "core" + * "vsync" +- interrupts: interrupt line from DPU to MDSS. +- ports: contains the list of output ports from DPU device. These ports connect + to interfaces that are external to the DPU hardware, such as DSI, DP etc. + + Each output port contains an endpoint that describes how it is connected to an + external interface. These are described by the standard properties documented + here: + Documentation/devicetree/bindings/graph.txt + Documentation/devicetree/bindings/media/video-interfaces.txt + + Port 0 -> DPU_INTF1 (DSI1) + Port 1 -> DPU_INTF2 (DSI2) + +Optional properties: +- assigned-clocks: list of clock specifiers for clocks needing rate assignment +- assigned-clock-rates: list of clock frequencies sorted in the same order as + the assigned-clocks property. + +Example: + + mdss: mdss@ae00000 { + compatible = "qcom,sdm845-mdss"; + reg = <0xae00000 0x1000>; + reg-names = "mdss"; + + power-domains = <&clock_dispcc 0>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, <&gcc GCC_DISP_AXI_CLK>, + <&clock_dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "core"; + + assigned-clocks = <&clock_dispcc DISP_CC_MDSS_MDP_CLK>; + assigned-clock-rates = <300000000>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_iommu 0>; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0xae00000 0xb2008>; + + mdss_mdp: mdp@ae01000 { + compatible = "qcom,sdm845-dpu"; + reg = <0 0x1000 0x8f000>, <0 0xb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&clock_dispcc DISP_CC_MDSS_AHB_CLK>, + <&clock_dispcc DISP_CC_MDSS_AXI_CLK>, + <&clock_dispcc DISP_CC_MDSS_MDP_CLK>, + <&clock_dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "core", "vsync"; + + assigned-clocks = <&clock_dispcc DISP_CC_MDSS_MDP_CLK>, + <&clock_dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <0 0 300000000 19200000>; + + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + }; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/bindings/dsi.txt b/arch/arm64/boot/dts/vendor/qcom/display/bindings/dsi.txt new file mode 100644 index 000000000000..577b3cede370 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/bindings/dsi.txt @@ -0,0 +1,247 @@ +Qualcomm Technologies Inc. adreno/snapdragon DSI output + +DSI Controller: +Required properties: +- compatible: + * "qcom,mdss-dsi-ctrl" +- reg: Physical base address and length of the registers of controller +- reg-names: The names of register regions. The following regions are required: + * "dsi_ctrl" +- interrupts: The interrupt signal from the DSI block. +- power-domains: Should be <&mmcc MDSS_GDSC>. +- clocks: Phandles to device clocks. +- clock-names: the following clocks are required: + * "mdp_core" + * "iface" + * "bus" + * "core_mmss" + * "byte" + * "pixel" + * "core" + For DSIv2, we need an additional clock: + * "src" + For DSI6G v2.0 onwards, we need also need the clock: + * "byte_intf" +- assigned-clocks: Parents of "byte" and "pixel" for the given platform. +- assigned-clock-parents: The Byte clock and Pixel clock PLL outputs provided + by a DSI PHY block. See [1] for details on clock bindings. +- vdd-supply: phandle to vdd regulator device node +- vddio-supply: phandle to vdd-io regulator device node +- vdda-supply: phandle to vdda regulator device node +- phys: phandle to DSI PHY device node +- phy-names: the name of the corresponding PHY device +- syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2) +- ports: Contains 2 DSI controller ports as child nodes. Each port contains + an endpoint subnode as defined in [2] and [3]. + +Optional properties: +- panel@0: Node of panel connected to this DSI controller. + See files in [4] for each supported panel. +- qcom,dual-dsi-mode: Boolean value indicating if the DSI controller is + driving a panel which needs 2 DSI links. +- qcom,master-dsi: Boolean value indicating if the DSI controller is driving + the master link of the 2-DSI panel. +- qcom,sync-dual-dsi: Boolean value indicating if the DSI controller is + driving a 2-DSI panel whose 2 links need receive command simultaneously. +- pinctrl-names: the pin control state names; should contain "default" +- pinctrl-0: the default pinctrl state (active) +- pinctrl-n: the "sleep" pinctrl state +- ports: contains DSI controller input and output ports as children, each + containing one endpoint subnode. + + DSI Endpoint properties: + - remote-endpoint: For port@0, set to phandle of the connected panel/bridge's + input endpoint. For port@1, set to the MDP interface output. See [2] for + device graph info. + + - data-lanes: this describes how the physical DSI data lanes are mapped + to the logical lanes on the given platform. The value contained in + index n describes what physical lane is mapped to the logical lane n + (DATAn, where n lies between 0 and 3). The clock lane position is fixed + and can't be changed. Hence, they aren't a part of the DT bindings. See + [3] for more info on the data-lanes property. + + For example: + + data-lanes = <3 0 1 2>; + + The above mapping describes that the logical data lane DATA0 is mapped to + the physical data lane DATA3, logical DATA1 to physical DATA0, logic DATA2 + to phys DATA1 and logic DATA3 to phys DATA2. + + There are only a limited number of physical to logical mappings possible: + <0 1 2 3> + <1 2 3 0> + <2 3 0 1> + <3 0 1 2> + <0 3 2 1> + <1 0 3 2> + <2 1 0 3> + <3 2 1 0> + +DSI PHY: +Required properties: +- compatible: Could be the following + * "qcom,dsi-phy-28nm-hpm" + * "qcom,dsi-phy-28nm-lp" + * "qcom,dsi-phy-20nm" + * "qcom,dsi-phy-28nm-8960" + * "qcom,dsi-phy-14nm" + * "qcom,dsi-phy-10nm" +- reg: Physical base address and length of the registers of PLL, PHY. Some + revisions require the PHY regulator base address, whereas others require the + PHY lane base address. See below for each PHY revision. +- reg-names: The names of register regions. The following regions are required: + For DSI 28nm HPM/LP/8960 PHYs and 20nm PHY: + * "dsi_pll" + * "dsi_phy" + * "dsi_phy_regulator" + For DSI 14nm and 10nm PHYs: + * "dsi_pll" + * "dsi_phy" + * "dsi_phy_lane" +- clock-cells: Must be 1. The DSI PHY block acts as a clock provider, creating + 2 clocks: A byte clock (index 0), and a pixel clock (index 1). +- power-domains: Should be <&mmcc MDSS_GDSC>. +- clocks: Phandles to device clocks. See [1] for details on clock bindings. +- clock-names: the following clocks are required: + * "iface" + For 28nm HPM/LP, 28nm 8960 PHYs: +- vddio-supply: phandle to vdd-io regulator device node + For 20nm PHY: +- vddio-supply: phandle to vdd-io regulator device node +- vcca-supply: phandle to vcca regulator device node + For 14nm PHY: +- vcca-supply: phandle to vcca regulator device node + For 10nm PHY: +- vdds-supply: phandle to vdds regulator device node + +Optional properties: +- qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY + regulator is wanted. +- qcom,mdss-mdp-transfer-time-us: Specifies the dsi transfer time for command mode + panels in microseconds. Driver uses this number to adjust + the clock rate according to the expected transfer time. + Increasing this value would slow down the mdp processing + and can result in slower performance. + Decreasing this value can speed up the mdp processing, + but this can also impact power consumption. + As a rule this time should not be higher than the time + that would be expected with the processing at the + dsi link rate since anyways this would be the maximum + transfer time that could be achieved. + If ping pong split is enabled, this time should not be higher + than two times the dsi link rate time. + If the property is not specified, then the default value is 14000 us. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/graph.txt +[3] Documentation/devicetree/bindings/media/video-interfaces.txt +[4] Documentation/devicetree/bindings/display/panel/ + +Example: + dsi0: dsi@fd922800 { + compatible = "qcom,mdss-dsi-ctrl"; + qcom,dsi-host-index = <0>; + interrupt-parent = <&mdp>; + interrupts = <4 0>; + reg-names = "dsi_ctrl"; + reg = <0xfd922800 0x200>; + power-domains = <&mmcc MDSS_GDSC>; + clock-names = + "bus", + "byte", + "core", + "core_mmss", + "iface", + "mdp_core", + "pixel"; + clocks = + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_ESC0_CLK>, + <&mmcc MMSS_MISC_AHB_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_PCLK0_CLK>; + + assigned-clocks = + <&mmcc BYTE0_CLK_SRC>, + <&mmcc PCLK0_CLK_SRC>; + assigned-clock-parents = + <&dsi_phy0 0>, + <&dsi_phy0 1>; + + vdda-supply = <&pma8084_l2>; + vdd-supply = <&pma8084_l22>; + vddio-supply = <&pma8084_l12>; + + phys = <&dsi_phy0>; + phy-names ="dsi-phy"; + + qcom,dual-dsi-mode; + qcom,master-dsi; + qcom,sync-dual-dsi; + + qcom,mdss-mdp-transfer-time-us = <12000>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dsi_active>; + pinctrl-1 = <&dsi_suspend>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&mdp_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; + + panel: panel@0 { + compatible = "sharp,lq101r1sx01"; + reg = <0>; + link2 = <&secondary>; + + power-supply = <...>; + backlight = <...>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + + dsi_phy0: dsi-phy@fd922a00 { + compatible = "qcom,dsi-phy-28nm-hpm"; + qcom,dsi-phy-index = <0>; + reg-names = + "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + reg = <0xfd922a00 0xd4>, + <0xfd922b00 0x2b0>, + <0xfd922d80 0x7b>; + clock-names = "iface"; + clocks = <&mmcc MDSS_AHB_CLK>; + #clock-cells = <1>; + vddio-supply = <&pma8084_l12>; + + qcom,dsi-phy-regulator-ldo-mode; + qcom,panel-allow-phy-poweroff; + qcom,dsi-phy-regulator-min-datarate-bps = <1200000000>; + qcom,panel-force-clock-lane-hs; + }; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/bindings/edp.txt b/arch/arm64/boot/dts/vendor/qcom/display/bindings/edp.txt new file mode 100644 index 000000000000..186ee231a1a1 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/bindings/edp.txt @@ -0,0 +1,56 @@ +Qualcomm Technologies Inc. snapdragon eDP output + +Required properties: +- compatible: + * "qcom,mdss-edp" +- reg: Physical base address and length of the registers of controller and PLL +- reg-names: The names of register regions. The following regions are required: + * "edp" + * "pll_base" +- interrupts: The interrupt signal from the eDP block. +- power-domains: Should be <&mmcc MDSS_GDSC>. +- clocks: device clocks + See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. +- clock-names: the following clocks are required: + * "core" + * "iface" + * "mdp_core" + * "pixel" + * "link" +- #clock-cells: The value should be 1. +- vdda-supply: phandle to vdda regulator device node +- lvl-vdd-supply: phandle to regulator device node which is used to supply power + to HPD receiving chip +- panel-en-gpios: GPIO pin to supply power to panel. +- panel-hpd-gpios: GPIO pin used for eDP hpd. + + +Example: + mdss_edp: qcom,mdss_edp@fd923400 { + compatible = "qcom,mdss-edp"; + reg-names = + "edp", + "pll_base"; + reg = <0xfd923400 0x700>, + <0xfd923a00 0xd4>; + interrupt-parent = <&mdss_mdp>; + interrupts = <12 0>; + power-domains = <&mmcc MDSS_GDSC>; + clock-names = + "core", + "pixel", + "iface", + "link", + "mdp_core"; + clocks = + <&mmcc MDSS_EDPAUX_CLK>, + <&mmcc MDSS_EDPPIXEL_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_EDPLINK_CLK>, + <&mmcc MDSS_MDP_CLK>; + #clock-cells = <1>; + vdda-supply = <&pma8084_l12>; + lvl-vdd-supply = <&lvl_vreg>; + panel-en-gpios = <&tlmm 137 0>; + panel-hpd-gpios = <&tlmm 103 0>; + }; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/bindings/hdmi.txt b/arch/arm64/boot/dts/vendor/qcom/display/bindings/hdmi.txt new file mode 100644 index 000000000000..66a123b221b8 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/bindings/hdmi.txt @@ -0,0 +1,99 @@ +Qualcomm Technologies, Inc. adreno/snapdragon hdmi output + +Required properties: +- compatible: one of the following + * "qcom,hdmi-tx-8996" + * "qcom,hdmi-tx-8994" + * "qcom,hdmi-tx-8084" + * "qcom,hdmi-tx-8974" + * "qcom,hdmi-tx-8660" + * "qcom,hdmi-tx-8960" +- reg: Physical base address and length of the controller's registers +- reg-names: "core_physical" +- interrupts: The interrupt signal from the hdmi block. +- power-domains: Should be <&mmcc MDSS_GDSC>. +- clocks: device clocks + See ../clocks/clock-bindings.txt for details. +- core-vdda-supply: phandle to supply regulator +- hdmi-mux-supply: phandle to mux regulator +- phys: the phandle for the HDMI PHY device +- phy-names: the name of the corresponding PHY device + +Optional properties: +- hpd-gpios: hpd pin +- qcom,hdmi-tx-mux-en-gpios: hdmi mux enable pin +- qcom,hdmi-tx-mux-sel-gpios: hdmi mux select pin +- qcom,hdmi-tx-mux-lpm-gpios: hdmi mux lpm pin +- power-domains: reference to the power domain(s), if available. +- pinctrl-names: the pin control state names; should contain "default" +- pinctrl-0: the default pinctrl state (active) +- pinctrl-1: the "sleep" pinctrl state + +HDMI PHY: +Required properties: +- compatible: Could be the following + * "qcom,hdmi-phy-8660" + * "qcom,hdmi-phy-8960" + * "qcom,hdmi-phy-8974" + * "qcom,hdmi-phy-8084" + * "qcom,hdmi-phy-8996" +- #phy-cells: Number of cells in a PHY specifier; Should be 0. +- reg: Physical base address and length of the registers of the PHY sub blocks. +- reg-names: The names of register regions. The following regions are required: + * "hdmi_phy" + * "hdmi_pll" + For HDMI PHY on msm8996, these additional register regions are required: + * "hdmi_tx_l0" + * "hdmi_tx_l1" + * "hdmi_tx_l3" + * "hdmi_tx_l4" +- power-domains: Should be <&mmcc MDSS_GDSC>. +- clocks: device clocks + See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. +- core-vdda-supply: phandle to vdda regulator device node + +Example: + +/ { + ... + + hdmi: hdmi@4a00000 { + compatible = "qcom,hdmi-tx-8960"; + reg-names = "core_physical"; + reg = <0x04a00000 0x2f0>; + interrupts = <GIC_SPI 79 0>; + power-domains = <&mmcc MDSS_GDSC>; + clock-names = + "core", + "master_iface", + "slave_iface"; + clocks = + <&mmcc HDMI_APP_CLK>, + <&mmcc HDMI_M_AHB_CLK>, + <&mmcc HDMI_S_AHB_CLK>; + qcom,hdmi-tx-ddc-clk = <&msmgpio 70 GPIO_ACTIVE_HIGH>; + qcom,hdmi-tx-ddc-data = <&msmgpio 71 GPIO_ACTIVE_HIGH>; + qcom,hdmi-tx-hpd = <&msmgpio 72 GPIO_ACTIVE_HIGH>; + core-vdda-supply = <&pm8921_hdmi_mvs>; + hdmi-mux-supply = <&ext_3p3v>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&hpd_active &ddc_active &cec_active>; + pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>; + + phys = <&hdmi_phy>; + phy-names = "hdmi_phy"; + }; + + hdmi_phy: phy@4a00400 { + compatible = "qcom,hdmi-phy-8960"; + reg-names = "hdmi_phy", + "hdmi_pll"; + reg = <0x4a00400 0x60>, + <0x4a00500 0x100>; + #phy-cells = <0>; + power-domains = <&mmcc MDSS_GDSC>; + clock-names = "slave_iface"; + clocks = <&mmcc HDMI_S_AHB_CLK>; + core-vdda-supply = <&pm8921_hdmi_mvs>; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/bindings/mdp4.txt b/arch/arm64/boot/dts/vendor/qcom/display/bindings/mdp4.txt new file mode 100644 index 000000000000..1d9cf3579dc6 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/bindings/mdp4.txt @@ -0,0 +1,112 @@ +Qualcomm Technologies, Inc. adreno/snapdragon MDP4 display controller + +Description: + +This is the bindings documentation for the MDP4 display controller found in +SoCs like MSM8960, APQ8064 and MSM8660. + +Required properties: +- compatible: + * "qcom,mdp4" - mdp4 +- reg: Physical base address and length of the controller's registers. +- interrupts: The interrupt signal from the display controller. +- clocks: device clocks + See ../clocks/clock-bindings.txt for details. +- clock-names: the following clocks are required. + * "core_clk" + * "iface_clk" + * "bus_clk" + * "lut_clk" + * "hdmi_clk" + * "tv_clk" +- ports: contains the list of output ports from MDP. These connect to interfaces + that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a + special case since it is a part of the MDP block itself). + + Each output port contains an endpoint that describes how it is connected to an + external interface. These are described by the standard properties documented + here: + Documentation/devicetree/bindings/graph.txt + Documentation/devicetree/bindings/media/video-interfaces.txt + + The output port mappings are: + Port 0 -> LCDC/LVDS + Port 1 -> DSI1 Cmd/Video + Port 2 -> DSI2 Cmd/Video + Port 3 -> DTV + +Optional properties: +- clock-names: the following clocks are optional: + * "lut_clk" + +Example: + +/ { + ... + + hdmi: hdmi@4a00000 { + ... + ports { + ... + port@0 { + reg = <0>; + hdmi_in: endpoint { + remote-endpoint = <&mdp_dtv_out>; + }; + }; + ... + }; + ... + }; + + ... + + mdp: mdp@5100000 { + compatible = "qcom,mdp4"; + reg = <0x05100000 0xf0000>; + interrupts = <GIC_SPI 75 0>; + clock-names = + "core_clk", + "iface_clk", + "lut_clk", + "hdmi_clk", + "tv_clk"; + clocks = + <&mmcc MDP_CLK>, + <&mmcc MDP_AHB_CLK>, + <&mmcc MDP_AXI_CLK>, + <&mmcc MDP_LUT_CLK>, + <&mmcc HDMI_TV_CLK>, + <&mmcc MDP_TV_CLK>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp_lvds_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + mdp_dsi1_out: endpoint { + }; + }; + + port@2 { + reg = <2>; + mdp_dsi2_out: endpoint { + }; + }; + + port@3 { + reg = <3>; + mdp_dtv_out: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/bindings/mdp5.txt b/arch/arm64/boot/dts/vendor/qcom/display/bindings/mdp5.txt new file mode 100644 index 000000000000..fcad35c3a26e --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/bindings/mdp5.txt @@ -0,0 +1,158 @@ +Qualcomm Technologies, Inc. adreno/snapdragon MDP5 display controller + +Description: + +This is the bindings documentation for the Mobile Display Subsytem(MDSS) that +encapsulates sub-blocks like MDP5, DSI, HDMI, eDP etc, and the MDP5 display +controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994 and MSM8996. + +MDSS: +Required properties: +- compatible: + * "qcom,mdss" - MDSS +- reg: Physical base address and length of the controller's registers. +- reg-names: The names of register regions. The following regions are required: + * "mdss_phys" + * "vbif_phys" +- interrupts: The interrupt signal from MDSS. +- interrupt-controller: identifies the node as an interrupt controller. +- #interrupt-cells: specifies the number of cells needed to encode an interrupt + source, should be 1. +- power-domains: a power domain consumer specifier according to + Documentation/devicetree/bindings/power/power_domain.txt +- clocks: device clocks. See ../clocks/clock-bindings.txt for details. +- clock-names: the following clocks are required. + * "iface" + * "bus" + * "vsync" +- #address-cells: number of address cells for the MDSS children. Should be 1. +- #size-cells: Should be 1. +- ranges: parent bus address space is the same as the child bus address space. + +Optional properties: +- clock-names: the following clocks are optional: + * "lut" + +MDP5: +Required properties: +- compatible: + * "qcom,mdp5" - MDP5 +- reg: Physical base address and length of the controller's registers. +- reg-names: The names of register regions. The following regions are required: + * "mdp_phys" +- interrupts: Interrupt line from MDP5 to MDSS interrupt controller. +- clocks: device clocks. See ../clocks/clock-bindings.txt for details. +- clock-names: the following clocks are required. +- * "bus" +- * "iface" +- * "core" +- * "vsync" +- ports: contains the list of output ports from MDP. These connect to interfaces + that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a + special case since it is a part of the MDP block itself). + + Each output port contains an endpoint that describes how it is connected to an + external interface. These are described by the standard properties documented + here: + Documentation/devicetree/bindings/graph.txt + Documentation/devicetree/bindings/media/video-interfaces.txt + + The availability of output ports can vary across SoC revisions: + + For MSM8974 and APQ8084: + Port 0 -> MDP_INTF0 (eDP) + Port 1 -> MDP_INTF1 (DSI1) + Port 2 -> MDP_INTF2 (DSI2) + Port 3 -> MDP_INTF3 (HDMI) + + For MSM8916: + Port 0 -> MDP_INTF1 (DSI1) + + For MSM8994 and MSM8996: + Port 0 -> MDP_INTF1 (DSI1) + Port 1 -> MDP_INTF2 (DSI2) + Port 2 -> MDP_INTF3 (HDMI) + +Optional properties: +- clock-names: the following clocks are optional: + * "lut" + +Example: + +/ { + ... + + mdss: mdss@1a00000 { + compatible = "qcom,mdss"; + reg = <0x1a00000 0x1000>, + <0x1ac8000 0x3000>; + reg-names = "mdss_phys", "vbif_phys"; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "vsync" + + interrupts = <0 72 0>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mdp: mdp@1a01000 { + compatible = "qcom,mdp5"; + reg = <0x1a01000 0x90000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0 0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + + dsi0: dsi@1a98000 { + ... + ports { + ... + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&mdp5_intf1_out>; + }; + }; + ... + }; + ... + }; + + dsi_phy0: dsi-phy@1a98300 { + ... + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/bindings/mdss-dsi-panel.txt b/arch/arm64/boot/dts/vendor/qcom/display/bindings/mdss-dsi-panel.txt new file mode 100644 index 000000000000..338ea8d8dc9e --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/bindings/mdss-dsi-panel.txt @@ -0,0 +1,810 @@ +QTI mdss-dsi-panel + +mdss-dsi-panel is a dsi panel device which supports panels that +are compatible with MIPI display serial interface specification. + +Required properties: +- compatible: This property applies to DSI V2 panels only. + This property should not be added for panels + that work based on version "V6.0" + DSI panels that are of different versions + are initialized by the drivers for dsi controller. + This property specifies the version + for DSI HW that this panel will work with + "qcom,dsi-panel-v2" = DSI V2.0 +- status: This property applies to DSI V2 panels only. + This property should not be added for panels + that work based on version "V6.0" + DSI panels that are of different versions + are initialized by the drivers for dsi controller. + A string that has to be set to "okay/ok" + to enable the panel driver. By default this property + will be set to "disable". Will be set to "ok/okay" + status for specific platforms. +- qcom,mdss-dsi-panel-controller: Specifies the phandle for the DSI controller that + this panel will be mapped to. +- qcom,mdss-dsi-panel-width: Specifies panel width in pixels. +- qcom,mdss-dsi-panel-height: Specifies panel height in pixels. +- qcom,mdss-dsi-bpp: Specifies the panel bits per pixel. + 3 = for rgb111 + 8 = for rgb332 + 12 = for rgb444 + 16 = for rgb565 + 18 = for rgb666 + 24 = for rgb888 +- qcom,mdss-dsi-panel-destination: A string that specifies the destination display for the panel. + "display_1" = DISPLAY_1 + "display_2" = DISPLAY_2 +- qcom,mdss-dsi-panel-timings: An array of length 12 that specifies the PHY + timing settings for the panel. +- qcom,mdss-dsi-panel-timings-8996: An array of length 40 char that specifies the 8996 PHY lane + timing settings for the panel. +- qcom,mdss-dsi-on-command: A byte stream formed by multiple dcs packets base on + qcom dsi controller protocol. + byte 0: dcs data type + byte 1: set to indicate this is an individual packet + (no chain) + byte 2: virtual channel number + byte 3: expect ack from client (dcs read command) + byte 4: wait number of specified ms after dcs command + transmitted + byte 5, 6: 16 bits length in network byte order + byte 7 and beyond: number byte of payload +- qcom,mdss-dsi-off-command: A byte stream formed by multiple dcs packets base on + qcom dsi controller protocol. + byte 0: dcs data type + byte 1: set to indicate this is an individual packet + (no chain) + byte 2: virtual channel number + byte 3: expect ack from client (dcs read command) + byte 4: wait number of specified ms after dcs command + transmitted + byte 5, 6: 16 bits length in network byte order + byte 7 and beyond: number byte of payload +- qcom,mdss-dsi-post-panel-on-command: same as "qcom,mdss-dsi-on-command" except commands are + sent after displaying an image. + +Note, if a short DCS packet(i.e packet with Byte 0:dcs data type as 05) mentioned in +qcom,mdss-dsi-on-command/qcom,mdss-dsi-off-command stream fails to transmit, +then 3 options can be tried. + 1. Send the packet as a long packet instead + Byte 0: dcs data type = 05 (DCS short Packet) + Byte 0: dcs data type = 29 (DCS long Packet) + 2. Send the packet in one burst by prepending with the next packet in packet stream + Byte 1 = 01 (indicates this is an individual packet) + Byte 1 = 00 (indicates this will be appended to the next + individual packet in the packet stream) + 3. Prepend a NULL packet to the short packet and send both in one burst instead of + combining multiple short packets and sending them in one burst. + +Optional properties: +- qcom,mdss-dsi-panel-name: A string used as a descriptive name of the panel +- qcom,mdss-dsi-panel-phy-timings: An array of length 'n' char that specifies the DSI PHY lane + timing settings for the panel. This is specific to SDE DRM driver. + The value of 'n' depends on the DSI PHY h/w revision and parsing this + property properly will be taken care in the DSI PHY DRM driver. +- qcom,cmd-sync-wait-broadcast: Boolean used to broadcast dcs command to panels. +- qcom,mdss-dsi-fbc-enable: Boolean used to enable frame buffer compression mode. +- qcom,mdss-dsi-panel-mode-switch: Boolean used to enable panel operating mode switch. +- qcom,mdss-dsi-fbc-slice-height: Slice height(in lines) of compressed block. + Expressed as power of 2. To set as 128 lines, + this should be set to 7. +- qcom,mdss-dsi-fbc-2d-pred-mode: Boolean to enable 2D map prediction. +- qcom,mdss-dsi-fbc-ver2-mode: Boolean to enable FBC 2.0 that supports 1/3 + compression. +- qcom,mdss-dsi-fbc-bpp: Compressed bpp supported by the panel. + Specified color order is used as default value. +- qcom,mdss-dsi-fbc-packing: Component packing. + 0 = default value. +- qcom,mdss-dsi-fbc-quant-error: Boolean used to enable quantization error calculation. +- qcom,mdss-dsi-fbc-bias: Bias for CD. + 0 = default value. +- qcom,mdss-dsi-fbc-pat-mode: Boolean used to enable PAT mode. +- qcom,mdss-dsi-fbc-vlc-mode: Boolean used to enable VLC mode. +- qcom,mdss-dsi-fbc-bflc-mode: Boolean used to enable BFLC mode. +- qcom,mdss-dsi-fbc-h-line-budget: Per line extra budget. + 0 = default value. +- qcom,mdss-dsi-fbc-budget-ctrl: Extra budget level. + 0 = default value. +- qcom,mdss-dsi-fbc-block-budget: Per block budget. + 0 = default value. +- qcom,mdss-dsi-fbc-lossless-threshold: Lossless mode threshold. + 0 = default value. +- qcom,mdss-dsi-fbc-lossy-threshold: Lossy mode threshold. + 0 = default value. +- qcom,mdss-dsi-fbc-rgb-threshold: Lossy RGB threshold. + 0 = default value. +- qcom,mdss-dsi-fbc-lossy-mode-idx: Lossy mode index value. + 0 = default value. +- qcom,mdss-dsi-fbc-max-pred-err: Max quantization prediction error. + 0 = default value +- qcom,mdss-dsi-h-back-porch: Horizontal back porch value in pixel. + 6 = default value. +- qcom,mdss-dsi-h-front-porch: Horizontal front porch value in pixel. + 6 = default value. +- qcom,mdss-dsi-h-pulse-width: Horizontal pulse width. + 2 = default value. +- qcom,mdss-dsi-h-sync-skew: Horizontal sync skew value. + 0 = default value. +- qcom,mdss-dsi-v-back-porch: Vertical back porch value in pixel. + 6 = default value. +- qcom,mdss-dsi-v-front-porch: Vertical front porch value in pixel. + 6 = default value. +- qcom,mdss-dsi-v-pulse-width: Vertical pulse width. + 2 = default value. +- qcom,mdss-dsi-h-left-border: Horizontal left border in pixel. + 0 = default value +- qcom,mdss-dsi-h-right-border: Horizontal right border in pixel. + 0 = default value +- qcom,mdss-dsi-v-top-border: Vertical top border in pixel. + 0 = default value +- qcom,mdss-dsi-v-bottom-border: Vertical bottom border in pixel. + 0 = default value +- qcom,mdss-dsi-underflow-color: Specifies the controller settings for the + panel under flow color. + 0xff = default value. +- qcom,mdss-dsi-border-color: Defines the border color value if border is present. + 0 = default value. +- qcom,mdss-dsi-panel-jitter: Panel jitter value is expressed in terms of numerator + and denominator. It contains two u32 values - numerator + followed by denominator. The jitter configurition causes + the early wakeup if panel needs to adjust before vsync. + Default jitter value is 2.0%. Max allowed value is 10%. +- qcom,mdss-dsi-panel-prefill-lines: An integer value defines the panel prefill lines required to + calculate the backoff time of rsc. + Default value is 16 lines. Max allowed value is vtotal. +- qcom,mdss-dsi-pan-enable-dynamic-fps: Boolean used to enable change in frame rate dynamically. +- qcom,mdss-dsi-pan-fps-update: A string that specifies when to change the frame rate. + "dfps_suspend_resume_mode"= FPS change request is + implemented during suspend/resume. + "dfps_immediate_clk_mode" = FPS change request is + implemented immediately using DSI clocks. + "dfps_immediate_porch_mode_hfp" = FPS change request is + implemented immediately by changing panel horizontal + front porch values. + "dfps_immediate_porch_mode_vfp" = FPS change request is + implemented immediately by changing panel vertical + front porch values. +- qcom,min-refresh-rate: Minimum refresh rate supported by the panel. +- qcom,max-refresh-rate: Maximum refresh rate supported by the panel. If max refresh + rate is not specified, then the frame rate of the panel in + qcom,mdss-dsi-panel-framerate is used. +- qcom,mdss-dsi-bl-pmic-control-type: A string that specifies the implementation of backlight + control for this panel. + "bl_ctrl_pwm" = Backlight controlled by PWM gpio. + "bl_ctrl_wled" = Backlight controlled by WLED. + "bl_ctrl_dcs" = Backlight controlled by DCS commands. + "bl_ctrl_external" = Backlight controlled by externally + other: Unknown backlight control. (default) +- qcom,mdss-dsi-sec-bl-pmic-control-type: A string that specifies the implementation of backlight + control for secondary panel. + "bl_ctrl_pwm" = Backlight controlled by PWM gpio. + "bl_ctrl_wled" = Backlight controlled by WLED. + "bl_ctrl_dcs" = Backlight controlled by DCS commands. + "bl_ctrl_external" = Backlight controlled by externally + other: Unknown backlight control. (default) +- qcom,mdss-dsi-bl-pwm-pmi: Boolean to indicate that PWM control is through second pmic chip. +- qcom,mdss-dsi-bl-pmic-bank-select: LPG channel for backlight. + Required if backlight pmic control type is PWM +- qcom,mdss-dsi-bl-pmic-pwm-frequency: PWM period in microseconds. + Required if backlight pmic control type is PWM +- qcom,mdss-dsi-pwm-gpio: PMIC gpio binding to backlight. + Required if backlight pmic control type is PWM +- qcom,mdss-dsi-bl-min-level: Specifies the min backlight level supported by the panel. + 0 = default value. +- qcom,mdss-dsi-bl-max-level: Specifies the max backlight level supported by the panel. + 255 = default value. +- qcom,mdss-brightness-max-level: Specifies the max brightness level supported. + 255 = default value. +- qcom,bl-update-flag: A string that specifies controls for backlight update of the panel. + "delay_until_first_frame" = Delay backlight update of the panel + until the first frame is received from the HW. +- qcom,mdss-dsi-interleave-mode: Specifies interleave mode. + 0 = default value. +- qcom,mdss-dsi-panel-type: Specifies the panel operating mode. + "dsi_video_mode" = enable video mode (default). + "dsi_cmd_mode" = enable command mode. +- qcom,5v-boost-gpio: Specifies the panel gpio for display 5v boost. +- qcom,mdss-dsi-te-check-enable: Boolean to enable Tear Check configuration. +- qcom,mdss-dsi-te-using-wd: Boolean entry enables the watchdog timer support to generate the vsync signal + for command mode panel. By default, panel TE will be used to generate the vsync. +- qcom,mdss-dsi-te-using-te-pin: Boolean to specify whether using hardware vsync. +- qcom,mdss-dsi-qsync-min-refresh-rate: A u32 entry to specify minimum refresh rate supported by the panel to enable qsync feature. +- qcom,mdss-dsi-qsync-on-commands: String that specifies the commands to enable qsync feature. +- qcom,mdss-dsi-qsync-on-commands-state: String that specifies the ctrl state for sending qsync on commands. + "dsi_lp_mode" = DSI low power mode (default) + "dsi_hs_mode" = DSI high speed mode +- qcom,mdss-dsi-qsync-off-commands: String that specifies the commands to disable qsync feature. +- qcom,mdss-dsi-qsync-off-commands-state: String that specifies the ctrl state for sending qsync off commands. + "dsi_lp_mode" = DSI low power mode (default) + "dsi_hs_mode" = DSI high speed mode +- qcom,mdss-dsi-te-pin-select: Specifies TE operating mode. + 0 = TE through embedded dcs command + 1 = TE through TE gpio pin. (default) +- qcom,mdss-dsi-te-dcs-command: Inserts the dcs command. + 1 = default value. +- qcom,mdss-dsi-wr-mem-start: DCS command for write_memory_start. + 0x2c = default value. +- qcom,mdss-dsi-wr-mem-continue: DCS command for write_memory_continue. + 0x3c = default value. +- qcom,mdss-dsi-h-sync-pulse: Specifies the pulse mode option for the panel. + 0 = Don't send hsa/he following vs/ve packet(default) + 1 = Send hsa/he following vs/ve packet +- qcom,mdss-dsi-hfp-power-mode: Boolean to determine DSI lane state during + horizontal front porch (HFP) blanking period. +- qcom,mdss-dsi-hbp-power-mode: Boolean to determine DSI lane state during + horizontal back porch (HBP) blanking period. +- qcom,mdss-dsi-hsa-power-mode: Boolean to determine DSI lane state during + horizontal sync active (HSA) mode. +- qcom,mdss-dsi-last-line-interleave Boolean to determine if last line + interleave flag needs to be enabled. +- qcom,mdss-dsi-bllp-eof-power-mode: Boolean to determine DSI lane state during + blanking low power period (BLLP) EOF mode. +- qcom,mdss-dsi-bllp-power-mode: Boolean to determine DSI lane state during + blanking low power period (BLLP) mode. +- qcom,mdss-dsi-traffic-mode: Specifies the panel traffic mode. + "non_burst_sync_pulse" = non burst with sync pulses (default). + "non_burst_sync_event" = non burst with sync start event. + "burst_mode" = burst mode. +- qcom,mdss-dsi-pixel-packing: Specifies if pixel packing is used (in case of RGB666). + "tight" = Tight packing (default value). + "loose" = Loose packing. +- qcom,mdss-dsi-virtual-channel-id: Specifies the virtual channel identefier. + 0 = default value. +- qcom,mdss-dsi-color-order: Specifies the R, G and B channel ordering. + "rgb_swap_rgb" = DSI_RGB_SWAP_RGB (default value) + "rgb_swap_rbg" = DSI_RGB_SWAP_RBG + "rgb_swap_brg" = DSI_RGB_SWAP_BRG + "rgb_swap_grb" = DSI_RGB_SWAP_GRB + "rgb_swap_gbr" = DSI_RGB_SWAP_GBR +- qcom,mdss-dsi-lane-0-state: Boolean that specifies whether data lane 0 is enabled. +- qcom,mdss-dsi-lane-1-state: Boolean that specifies whether data lane 1 is enabled. +- qcom,mdss-dsi-lane-2-state: Boolean that specifies whether data lane 2 is enabled. +- qcom,mdss-dsi-lane-3-state: Boolean that specifies whether data lane 3 is enabled. +- qcom,mdss-dsi-t-clk-post: Specifies the byte clock cycles after mode switch. + 0x00 = default value. +- qcom,mdss-dsi-t-clk-pre: Specifies the byte clock cycles before mode switch. + 0x00 = default value. +- qcom,mdss-dsi-stream: Specifies the packet stream to be used. + 0 = stream 0 (default) + 1 = stream 1 +- qcom,mdss-dsi-mdp-trigger: Specifies the trigger mechanism to be used for MDP path. + "none" = no trigger + "trigger_te" = Tear check signal line used for trigger + "trigger_sw" = Triggered by software (default) + "trigger_sw_te" = Software trigger and TE +- qcom,mdss-dsi-dma-trigger: Specifies the trigger mechanism to be used for DMA path. + "none" = no trigger + "trigger_te" = Tear check signal line used for trigger + "trigger_sw" = Triggered by software (default) + "trigger_sw_seof" = Software trigger and start/end of frame trigger. + "trigger_sw_te" = Software trigger and TE +- qcom,mdss-dsi-panel-framerate: Specifies the frame rate for the panel. + 60 = 60 frames per second (default) +- qcom,mdss-dsi-panel-clockrate: A 64 bit value specifies the panel clock speed in Hz. + 0 = default value. +- qcom,mdss-mdp-transfer-time-us: Specifies the dsi transfer time for command mode + panels in microseconds. Driver uses this number to adjust + the clock rate according to the expected transfer time. + Increasing this value would slow down the mdp processing + and can result in slower performance. + Decreasing this value can speed up the mdp processing, + but this can also impact power consumption. + As a rule this time should not be higher than the time + that would be expected with the processing at the + dsi link rate since anyways this would be the maximum + transfer time that could be achieved. + If ping pong split enabled, this time should not be higher + than two times the dsi link rate time. + 14000 = default value. +- qcom,mdss-dsi-on-command-state: String that specifies the ctrl state for sending ON commands. + "dsi_lp_mode" = DSI low power mode (default) + "dsi_hs_mode" = DSI high speed mode +- qcom,mdss-dsi-off-command-state: String that specifies the ctrl state for sending OFF commands. + "dsi_lp_mode" = DSI low power mode (default) + "dsi_hs_mode" = DSI high speed mode +- qcom,mdss-dsi-post-mode-switch-on-command-state: String that specifies the ctrl state for sending ON commands post mode switch. + "dsi_lp_mode" = DSI low power mode (default) + "dsi_hs_mode" = DSI high speed mode +- qcom,mdss-pan-physical-width-dimension: Specifies panel physical width in mm which corresponds + to the physical width in the framebuffer information. +- qcom,mdss-pan-physical-height-dimension: Specifies panel physical height in mm which corresponds + to the physical height in the framebuffer information. +- qcom,mdss-dsi-mode-sel-gpio-state: String that specifies the lcd mode for panel + (such as single-port/dual-port), if qcom,panel-mode-gpio + binding is defined in dsi controller. + "dual_port" = Set GPIO to LOW + "single_port" = Set GPIO to HIGH + "high" = Set GPIO to HIGH + "low" = Set GPIO to LOW + The default value is "dual_port". +- qcom,mdss-tear-check-disable: Boolean to disable mdp tear check. Tear check is enabled by default to avoid + tearing. Other tear-check properties are ignored if this property is present. + The below tear check configuration properties can be individually tuned if + tear check is enabled. +- qcom,mdss-tear-check-sync-cfg-height: Specifies the vertical total number of lines. + The default value is 0xfff0. +- qcom,mdss-tear-check-sync-init-val: Specifies the init value at which the read pointer gets loaded + at vsync edge. The reader pointer refers to the line number of + panel buffer that is currently being updated. + The default value is panel height. +- qcom,mdss-tear-check-sync-threshold-start: + Allows the first ROI line write to an panel when read pointer is + between the range of ROI start line and ROI start line plus this + setting. + The default value is 4. +- qcom,mdss-tear-check-sync-threshold-continue: + The minimum number of lines the write pointer needs to be + above the read pointer so that it is safe to write to the panel. + (This check is not done for the first ROI line write of an update) + The default value is 4. +- qcom,mdss-tear-check-start-pos: Specify the y position from which the start_threshold value is + added and write is kicked off if the read pointer falls within that + region. + The default value is panel height. +- qcom,mdss-tear-check-rd-ptr-trigger-intr: + Specify the read pointer value at which an interrupt has to be + generated. + The default value is panel height + 1. +- qcom,mdss-tear-check-frame-rate: Specify the value to be a real frame rate(fps) x 100 factor to tune the + timing of TE simulation with more precision. + The default value is 6000 with 60 fps. +- qcom,mdss-dsi-reset-sequence: An array that lists the + sequence of reset gpio values and sleeps + Each command will have the format defined + as below: + --> Reset GPIO value + --> Sleep value (in ms) +- qcom,partial-update-enabled: String used to enable partial + panel update for command mode panels. + "none": partial update is disabled + "single_roi": default enable mode, only single roi is sent to panel + "dual_roi": two rois are merged into one big roi. Panel ddic should be able + to process two roi's along with the DCS command to send two rois. + disabled if property is not specified. This property is specified + per timing node to support resolution restrictions. +- qcom,mdss-dsi-horizontal-line-idle: List of width ranges (EC - SC) in pixels indicating + additional idle time in dsi clock cycles that is needed + to compensate for smaller line width. +- qcom,partial-update-roi-merge: Boolean indicates roi combination is need + and function has been provided for dcs + 2A/2B command. This property is specified per timing node to support + resolution restrictions. +- qcom,dcs-cmd-by-left: Boolean to indicate that dcs command are sent + through the left DSI controller only in a dual-dsi configuration +- qcom,mdss-dsi-panel-hdr-enabled: Boolean to indicate HDR support in panel. +- qcom,mdss-dsi-panel-hdr-color-primaries: + Array of 8 unsigned integers denoting chromaticity of panel.These + values are specified in nits units. The value range is 0 through 50000. + To obtain real chromacity, these values should be divided by factor of + 50000. The structure of array is defined in below order + value 1: x value of white chromaticity of display panel + value 2: y value of white chromaticity of display panel + value 3: x value of red chromaticity of display panel + value 4: y value of red chromaticity of display panel + value 5: x value of green chromaticity of display panel + value 6: y value of green chromaticity of display panel + value 7: x value of blue chromaticity of display panel + value 8: y value of blue chromaticity of display panel +- qcom,mdss-dsi-panel-peak-brightness: Maximum brightness supported by panel.In absence of maximum value + typical value becomes peak brightness. Value is specified in nits units. + To obtain real peak brightness, this value should be divided by factor of + 10000. +- qcom,mdss-dsi-panel-blackness-level: Blackness level supported by panel. Blackness level is defined as + ratio of peak brightness to contrast. Value is specified in nits units. + To obtain real blackness level, this value should be divided by factor of + 10000. +- qcom,mdss-dsi-lp11-init: Boolean used to enable the DSI clocks and data lanes (low power 11) + before issuing hardware reset line. +- qcom,mdss-dsi-init-delay-us: Delay in microseconds(us) before performing any DSI activity in lp11 + mode. This master delay (t_init_delay as per DSI spec) should be sum + of DSI internal delay to reach fuctional after power up and minimum + delay required by panel to reach functional. +- qcom,mdss-dsi-rx-eot-ignore: Boolean used to enable ignoring end of transmission packets. +- qcom,mdss-dsi-tx-eot-append: Boolean used to enable appending end of transmission packets. +- qcom,ulps-enabled: Boolean to enable support for Ultra Low Power State (ULPS) mode. +- qcom,suspend-ulps-enabled: Boolean to enable support for ULPS mode for panels during suspend state. +- qcom,panel-roi-alignment: Specifies the panel ROI alignment restrictions on its + left, top, width, height alignments and minimum width and + height values. This property is specified per timing node to support + resolution's alignment restrictions. +- qcom,esd-check-enabled: Boolean used to enable ESD recovery feature. +- qcom,mdss-dsi-panel-status-command: A byte stream formed by multiple dcs packets based on + qcom dsi controller protocol, to read the panel status. + This value is used to kick in the ESD recovery. + byte 0: dcs data type + byte 1: set to indicate this is an individual packet + (no chain) + byte 2: virtual channel number + byte 3: expect ack from client (dcs read command) + byte 4: wait number of specified ms after dcs command + transmitted + byte 5, 6: 16 bits length in network byte order + byte 7 and beyond: number byte of payload +- qcom,mdss-dsi-panel-status-command-mode: + String that specifies the ctrl state for reading the panel status. + "dsi_lp_mode" = DSI low power mode + "dsi_hs_mode" = DSI high speed mode +- qcom,mdss-dsi-lp1-command: An optional byte stream to request low + power mode on a panel +- qcom,mdss-dsi-lp1-command-mode: String that specifies the ctrl state for + setting the panel power mode. + "dsi_lp_mode" = DSI low power mode + "dsi_hs_mode" = DSI high speed mode +- qcom,mdss-dsi-lp2-command: An optional byte stream to request ultra + low power mode on a panel +- qcom,mdss-dsi-lp2-command-mode: String that specifies the ctrl state for + setting the panel power mode. + "dsi_lp_mode" = DSI low power mode + "dsi_hs_mode" = DSI high speed mode +- qcom,mdss-dsi-nolp-command: An optional byte stream to disable low + power and ultra low power panel modes +- qcom,mdss-dsi-nolp-command-mode: String that specifies the ctrl state for + setting the panel power mode. + "dsi_lp_mode" = DSI low power mode + "dsi_hs_mode" = DSI high speed mode +- qcom,mdss-dsi-panel-status-check-mode:Specifies the panel status check method for ESD recovery. + "bta_check" = Uses BTA to check the panel status + "reg_read" = Reads panel status register to check the panel status + "reg_read_nt35596" = Reads panel status register to check the panel + status for NT35596 panel. + "te_signal_check" = Uses TE signal behaviour to check the panel status +- qcom,mdss-dsi-panel-status-read-length: Integer array that specify the expected read-back length of values + for each of panel registers. Each length is corresponding to number of + returned parameters of register introduced in specification. +- qcom,mdss-dsi-panel-status-valid-params: Integer array that specify the valid returned values which need to check + for each of register. + Some panel need only check the first few values returned from panel. + So: if this property is the same to qcom,mdss-dsi-panel-status-read-length, + then just ignore this one. +- qcom,mdss-dsi-panel-status-value: Multiple integer arrays, each specifies the values of the panel status register + which is used to check the panel status. The size of each array is the sum of + length specified in qcom,mdss-dsi-panel-status-read-length, and must be equal. + This can cover that Some panel may return several alternative values. +- qcom,mdss-dsi-panel-max-error-count: Integer value that specifies the maximum number of errors from register + read that can be ignored before treating that the panel has gone bad. +- qcom,dynamic-mode-switch-enabled: Boolean used to mention whether panel supports + dynamic switching from video mode to command mode + and vice versa. +- qcom,dynamic-mode-switch-type: A string specifies how to perform dynamic mode switch. + If qcom,dynamic-mode-switch-enabled is set and no string specified, default value is + dynamic-switch-suspend-resume. + "dynamic-switch-suspend-resume"= Switch using suspend/resume. Panel will + go blank during transition. + "dynamic-switch-immediate"= Switch on next frame update. Panel will + not go blank for this transition. + "dynamic-resolution-switch-immediate"= Switch the panel resolution. Panel will + not go blank for this transition. +- qcom,mdss-dsi-post-mode-switch-on-command: Multiple dcs packets used for turning on DSI panel + after panel has switch modes. + Refer to "qcom,mdss-dsi-on-command" section for adding commands. +- qcom,video-to-cmd-mode-switch-commands: List of commands that need to be sent + to panel in order to switch from video mode to command mode dynamically. + Refer to "qcom,mdss-dsi-on-command" section for adding commands. +- qcom,cmd-to-video-mode-switch-commands: List of commands that need to be sent + to panel in order to switch from command mode to video mode dynamically. + Refer to "qcom,mdss-dsi-on-command" section for adding commands. +- qcom,send-pps-before-switch: Boolean propety to indicate when PPS commands should be sent, + either before or after switch commands during dynamic resolution + switch in DSC panels. If the property is not present, the default + behavior is to send PPS commands after the switch commands. +- qcom,mdss-dsi-panel-orientation: String used to indicate orientation of panel + "180" = panel is flipped in both horizontal and vertical directions + "hflip" = panel is flipped in horizontal direction + "vflip" = panel is flipped in vertical direction +- qcom,panel-ack-disabled: A boolean property to indicate, whether we need to wait for any ACK from the panel + for any commands that we send. +- qcom,mdss-dsi-force-clock-lane-hs: Boolean to force dsi clock lanes to HS mode always. + +- qcom,compression-mode: Select compression mode for panel. + "fbc" - frame buffer compression + "dsc" - display stream compression. + If "dsc" compression is used then config subnodes needs to be defined. +- qcom,panel-supply-entries: A node that lists the elements of the supply used to + power the DSI panel. There can be more than one instance + of this binding, in which case the entry would be appended + with the supply entry index. For a detailed description of + fields in the supply entry, refer to the qcom,ctrl-supply-entries + binding above. +- qcom,mdss-dsc-version: An 8 bit value indicates the DSC version supported by panel. Bits[0.3] + provides information about minor version while Bits[4.7] provides + major version information. It supports only DSC rev 1(Major).1(Minor) + right now. +- qcom,mdss-dsc-scr-version: Each DSC version can have multiple SCR. This 8 bit value indicates + current SCR revision information supported by panel. +- qcom,mdss-dsc-encoders: An integer value indicating how many DSC encoders should be used + to drive data stream to DSI. + Default value is 1 and max value is 2. + 2 encoder should be used only if qcom,mdss-lm-split or + qcom,split-mode with pingpong-split is used. +- qcom,mdss-dsc-slice-height: An integer value indicates the dsc slice height. +- qcom,mdss-dsc-slice-width: An integer value indicates the dsc slice width. + Multiple of slice width should be equal to panel-width. + Maximum 2 slices per DSC encoder can be used so if 2 DSC encoders + are used then minimum slice width is equal to panel-width/4. +- qcom,mdss-dsc-slice-per-pkt: An integer value indicates the slice per dsi packet. +- qcom,mdss-dsc-bit-per-component: An integer value indicates the bits per component before compression. +- qcom,mdss-dsc-bit-per-pixel: An integer value indicates the bits per pixel after compression. +- qcom,mdss-dsc-block-prediction-enable: A boolean value to enable/disable the block prediction at decoder. +- qcom,mdss-dsc-config-by-manufacture-cmd: A boolean to indicates panel use manufacture command to setup pps + instead of standard dcs type 0x0A. +- qcom,display-topology: Array of u32 values which specifies the list of topologies available + for the display. A display topology is defined by a + set of 3 values in the order: + - number of mixers + - number of compression encoders + - number of interfaces + Therefore, the array should always contain a tuple of 3 elements. +- qcom,default-topology-index: An u32 value which indexes the topology set + specified by the node "qcom,display-topology" + to identify the default topology for the + display. The first set is indexed by the + value 0. +- qcom,mdss-dsi-ext-bridge-mode: External bridge chip is connected instead of panel. +- qcom,mdss-dsi-dma-schedule-line: An integer value indicates the line number after vertical active + region, at which command DMA needs to be triggered. + +Required properties for sub-nodes: None +Optional properties: +- qcom,dba-panel: Indicates whether the current panel is used as a display bridge + to a non-DSI interface. +- qcom,bridge-name: A string to indicate the name of the bridge chip connected to DSI. qcom,bridge-name + is required if qcom,dba-panel is defined for the panel. +- qcom,adjust-timer-wakeup-ms: An integer value to indicate the timer delay(in ms) to accommodate + s/w delay while configuring the event timer wakeup logic. + +- qcom,mdss-dsi-display-timings: Parent node that lists the different resolutions that the panel supports. + Each child represents timings settings for a specific resolution. +- qcom,mdss-dsi-post-init-delay: Specifies required number of frames to wait so that panel can be functional + to show proper display. +- qcom,mdss-dsi-video-mode: A boolean to indicates current timing can only work in video mode. +- qcom,mdss-dsi-cmd-mode: A boolean to indicates current timing can only work in command mode. + +Additional properties added to the second level nodes that represent timings properties: +- qcom,mdss-dsi-timing-default: Property that specifies the current child as the default + timing configuration that will be used. +- qcom,mdss-dsi-timing-switch-command: List of commands that need to be sent + to panel when the resolution/timing switch happens dynamically. + Refer to "qcom,mdss-dsi-on-command" section for adding commands. +- qcom,mdss-dsi-timing-switch-command-state: String that specifies the ctrl state for sending resolution switch + commands. + "dsi_lp_mode" = DSI low power mode (default) + "dsi_hs_mode" = DSI high speed mode + +Note, if a given optional qcom,* binding is not present, then the driver will configure +the default values specified. + +Example: +&mdss_mdp { + dsi_sim_vid: qcom,mdss_dsi_sim_video { + qcom,mdss-dsi-panel-name = "simulator video mode dsi panel"; + qcom,mdss-dsi-panel-controller = <&mdss_dsi0>; + qcom,mdss-dsi-panel-height = <1280>; + qcom,mdss-dsi-panel-width = <720>; + qcom,mdss-dsi-bpp = <24>; + qcom,mdss-dsi-pixel-packing = <0>; + qcom,mdss-dsi-panel-destination = "display_1"; + qcom,cmd-sync-wait-broadcast; + qcom,mdss-dsi-fbc-enable; + qcom,mdss-dsi-panel-mode-switch; + qcom,mdss-dsi-fbc-slice-height = <5>; + qcom,mdss-dsi-fbc-2d-pred-mode; + qcom,mdss-dsi-fbc-ver2-mode; + qcom,mdss-dsi-fbc-bpp = <0>; + qcom,mdss-dsi-fbc-packing = <0>; + qcom,mdss-dsi-fbc-quant-error; + qcom,mdss-dsi-fbc-bias = <0>; + qcom,mdss-dsi-fbc-pat-mode; + qcom,mdss-dsi-fbc-vlc-mode; + qcom,mdss-dsi-fbc-bflc-mode; + qcom,mdss-dsi-fbc-h-line-budget = <0>; + qcom,mdss-dsi-fbc-budget-ctrl = <0>; + qcom,mdss-dsi-fbc-block-budget = <0>; + qcom,mdss-dsi-fbc-lossless-threshold = <0>; + qcom,mdss-dsi-fbc-lossy-threshold = <0>; + qcom,mdss-dsi-fbc-rgb-threshold = <0>; + qcom,mdss-dsi-fbc-lossy-mode-idx = <0>; + qcom,mdss-dsi-fbc-max-pred-err = <2>; + qcom,mdss-dsi-h-front-porch = <140>; + qcom,mdss-dsi-h-back-porch = <164>; + qcom,mdss-dsi-h-pulse-width = <8>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <6>; + qcom,mdss-dsi-v-front-porch = <1>; + qcom,mdss-dsi-v-pulse-width = <1>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-border-color = <0>; + qcom,mdss-dsi-underflow-color = <0xff>; + qcom,mdss-dsi-bl-min-level = <1>; + qcom,mdss-dsi-bl-max-level = < 15>; + qcom,mdss-brightness-max-level = <255>; + qcom,bl-update-flag = "delay_until_first_frame"; + qcom,mdss-dsi-interleave-mode = <0>; + qcom,mdss-dsi-panel-type = "dsi_video_mode"; + qcom,mdss-dsi-te-check-enable; + qcom,mdss-dsi-te-using-wd; + qcom,mdss-dsi-te-using-te-pin; + qcom,mdss-dsi-qsync-min-refresh-rate = <30>; + qcom,mdss-dsi-te-dcs-command = <1>; + qcom,mdss-dsi-wr-mem-continue = <0x3c>; + qcom,mdss-dsi-wr-mem-start = <0x2c>; + qcom,mdss-dsi-te-pin-select = <1>; + qcom,mdss-dsi-h-sync-pulse = <1>; + qcom,mdss-dsi-hfp-power-mode; + qcom,mdss-dsi-hbp-power-mode; + qcom,mdss-dsi-hsa-power-mode; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,mdss-dsi-last-line-interleave; + qcom,mdss-dsi-traffic-mode = <0>; + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-color-order = <0>; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-t-clk-post = <0x20>; + qcom,mdss-dsi-t-clk-pre = <0x2c>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-mdp-trigger = <0>; + qcom,mdss-dsi-dma-trigger = <0>; + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-panel-timings = [7d 25 1d 00 37 33 + 22 27 1e 03 04 00]; + qcom,mdss-dsi-panel-timings-8996 = [23 20 06 09 05 03 04 a0 + 23 20 06 09 05 03 04 a0 + 23 20 06 09 05 03 04 a0 + 23 20 06 09 05 03 04 a0 + 23 2e 06 08 05 03 04 a0]; + qcom,mdss-dsi-on-command = [32 01 00 00 00 00 02 00 00 + 29 01 00 00 10 00 02 FF 99]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command = [22 01 00 00 00 00 00]; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; + qcom,mdss-dsi-pan-enable-dynamic-fps; + qcom,mdss-dsi-pan-fps-update = "dfps_suspend_resume_mode"; + qcom,min-refresh-rate = <30>; + qcom,max-refresh-rate = <60>; + qcom,mdss-dsi-bl-pmic-bank-select = <0>; + qcom,mdss-dsi-bl-pmic-pwm-frequency = <0>; + qcom,mdss-dsi-pwm-gpio = <&pm8941_mpps 5 0>; + qcom,5v-boost-gpio = <&pm8994_gpios 14 0>; + qcom,mdss-pan-physical-width-dimension = <60>; + qcom,mdss-pan-physical-height-dimension = <140>; + qcom,mdss-dsi-mode-sel-gpio-state = "dsc_mode"; + qcom,mdss-tear-check-sync-cfg-height = <0xfff0>; + qcom,mdss-tear-check-sync-init-val = <1280>; + qcom,mdss-tear-check-sync-threshold-start = <4>; + qcom,mdss-tear-check-sync-threshold-continue = <4>; + qcom,mdss-tear-check-start-pos = <1280>; + qcom,mdss-tear-check-rd-ptr-trigger-intr = <1281>; + qcom,mdss-tear-check-frame-rate = <6000>; + qcom,mdss-dsi-reset-sequence = <1 2>, <0 10>, <1 10>; + qcom,dcs-cmd-by-left; + qcom,mdss-dsi-lp11-init; + qcom,mdss-dsi-init-delay-us = <100>; + mdss-dsi-rx-eot-ignore; + mdss-dsi-tx-eot-append; + qcom,ulps-enabled; + qcom,suspend-ulps-enabled; + qcom,esd-check-enabled; + qcom,mdss-dsi-panel-status-command = [06 01 00 01 05 00 02 0A 08]; + qcom,mdss-dsi-panel-status-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-panel-status-check-mode = "reg_read"; + qcom,mdss-dsi-panel-status-read-length = <8>; + qcom,mdss-dsi-panel-max-error-count = <3>; + qcom,mdss-dsi-panel-status-value = <0x1c 0x00 0x05 0x02 0x40 0x84 0x06 0x01>; + qcom,dynamic-mode-switch-enabled; + qcom,dynamic-mode-switch-type = "dynamic-switch-immediate"; + qcom,mdss-dsi-post-mode-switch-on-command = [32 01 00 00 00 00 02 00 00 + 29 01 00 00 10 00 02 B0 03]; + qcom,video-to-cmd-mode-switch-commands = [15 01 00 00 00 00 02 C2 0B + 15 01 00 00 00 00 02 C2 08]; + qcom,cmd-to-video-mode-switch-commands = [15 01 00 00 00 00 02 C2 03]; + qcom,send-pps-before-switch; + qcom,panel-ack-disabled; + qcom,mdss-dsi-horizontal-line-idle = <0 40 256>, + <40 120 128>, + <128 240 64>; + qcom,mdss-dsi-panel-orientation = "180" + qcom,mdss-dsi-panel-jitter = <0x8 0x10>; + qcom,mdss-dsi-panel-prefill-lines = <0x10>; + qcom,mdss-dsi-force-clock-lane-hs; + qcom,compression-mode = "dsc"; + qcom,adjust-timer-wakeup-ms = <1>; + qcom,mdss-dsi-display-timings { + wqhd { + qcom,mdss-dsi-cmd-mode; + qcom,mdss-dsi-timing-default; + qcom,mdss-dsi-panel-width = <720>; + qcom,mdss-dsi-panel-height = <2560>; + qcom,mdss-dsi-h-front-porch = <20>; + qcom,mdss-dsi-h-back-porch = <8>; + qcom,mdss-dsi-h-pulse-width = <8>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <4>; + qcom,mdss-dsi-v-front-porch = <728>; + qcom,mdss-dsi-v-pulse-width = <4>; + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-panel-clockrate = <424000000>; + qcom,mdss-mdp-transfer-time-us = <12500>; + qcom,mdss-dsi-panel-timings = [E6 38 26 00 68 6E 2A 3C 2C 03 04 00]; + qcom,mdss-dsi-t-clk-post = <0x02>; + qcom,mdss-dsi-t-clk-pre = <0x2a>; + qcom,mdss-dsi-on-command = [05 01 00 00 a0 00 02 11 00 + 05 01 00 00 02 00 02 29 00]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-timing-switch-command = [ + 29 00 00 00 00 00 02 B0 04 + 29 00 00 00 00 00 02 F1 00]; + qcom,mdss-dsi-timing-switch-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-qsync-on-commands = [15 01 00 00 00 00 02 51 00]; + qcom,mdss-dsi-qsync-on-commands-state = "dsi_hs_mode"; + qcom,mdss-dsi-qsync-off-commands = [15 01 00 00 00 00 02 51 00]; + qcom,mdss-dsi-qsync-off-commands-state = "dsi_hs_mode"; + + qcom,mdss-dsc-slice-height = <16>; + qcom,mdss-dsc-slice-width = <360>; + qcom,mdss-dsc-slice-per-pkt = <2>; + qcom,mdss-dsc-bit-per-component = <8>; + qcom,mdss-dsc-bit-per-pixel = <8>; + qcom,mdss-dsc-block-prediction-enable; + qcom,mdss-dsc-config-by-manufacture-cmd; + qcom,display-topology = <1 1 1>; + qcom,default-topology-index = <0>; + qcom,partial-update-enabled = "single_roi"; + qcom,panel-roi-alignment = <4 4 2 2 20 20>; + }; + }; + qcom,panel-supply-entries { + #address-cells = <1>; + #size-cells = <0>; + + qcom,panel-supply-entry@0 { + reg = <0>; + qcom,supply-name = "vdd"; + qcom,supply-min-voltage = <2800000>; + qcom,supply-max-voltage = <2800000>; + qcom,supply-enable-load = <100000>; + qcom,supply-disable-load = <100>; + qcom,supply-pre-on-sleep = <0>; + qcom,supply-post-on-sleep = <0>; + qcom,supply-pre-off-sleep = <0>; + qcom,supply-post-off-sleep = <0>; + }; + + qcom,panel-supply-entry@1 { + reg = <1>; + qcom,supply-name = "vddio"; + qcom,supply-min-voltage = <1800000>; + qcom,supply-max-voltage = <1800000>; + qcom,supply-enable-load = <100000>; + qcom,supply-disable-load = <100>; + qcom,supply-pre-on-sleep = <0>; + qcom,supply-post-on-sleep = <0>; + qcom,supply-pre-off-sleep = <0>; + qcom,supply-post-off-sleep = <0>; + }; + }; + + qcom,dba-panel; + qcom,bridge-name = "adv7533"; + qcom,mdss-dsc-version = <0x11>; + qcom,mdss-dsc-scr-version = <0x1>; + qcom,mdss-dsc-slice-height = <16>; + qcom,mdss-dsc-slice-width = <360>; + qcom,mdss-dsc-slice-per-pkt = <2>; + qcom,mdss-dsc-bit-per-component = <8>; + qcom,mdss-dsc-bit-per-pixel = <8>; + qcom,mdss-dsc-block-prediction-enable; + qcom,mdss-dsc-config-by-manufacture-cmd; + qcom,display-topology = <1 1 1>, + <2 2 1>; + qcom,default-topology-index = <0>; + qcom,mdss-dsi-dma-schedule-line = <5>; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/bindings/mdss-pll.txt b/arch/arm64/boot/dts/vendor/qcom/display/bindings/mdss-pll.txt new file mode 100644 index 000000000000..a93529717d1c --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/bindings/mdss-pll.txt @@ -0,0 +1,108 @@ +Qualcomm Technologies, Inc. MDSS pll for DSI/EDP/HDMI + +mdss-pll is a pll controller device which supports pll devices that +are compatible with MIPI display serial interface specification, +HDMI and edp. + +Required properties: +- compatible: Compatible name used in the driver. Should be one of: + "qcom,mdss_dsi_pll_8916", "qcom,mdss_dsi_pll_8939", + "qcom,mdss_dsi_pll_8974", "qcom,mdss_dsi_pll_8994", + "qcom,mdss_dsi_pll_8994", "qcom,mdss_dsi_pll_8909", + "qcom,mdss_hdmi_pll", "qcom,mdss_hdmi_pll_8994", + "qcom,mdss_dsi_pll_8992", "qcom,mdss_hdmi_pll_8992", + "qcom,mdss_dsi_pll_8996", "qcom,mdss_hdmi_pll_8996", + "qcom,mdss_hdmi_pll_8996_v2", "qcom,mdss_dsi_pll_8996_v2", + "qcom,mdss_hdmi_pll_8996_v3", "qcom,mdss_hdmi_pll_8996_v3_1p8", + "qcom,mdss_edp_pll_8996_v3", "qcom,mdss_edp_pll_8996_v3_1p8", + "qcom,mdss_dsi_pll_10nm", "qcom,mdss_dp_pll_8998", + "qcom,mdss_hdmi_pll_8998", "qcom,mdss_dp_pll_10nm", + "qcom,mdss_dsi_pll_7nm", "qcom,mdss_dp_pll_7nm", + "qcom,mdss_dsi_pll_28lpm", "qcom,mdss_dsi_pll_14nm", + "qcom,mdss_dp_pll_14nm", "qcom,mdss_dsi_pll_7nm_v2", + "qcom,mdss_hdmi_pll_28lpm","qcom,mdss_dsi_pll_7nm_v4_1", + "qcom,mdss_dp_pll_7nm_v2" +- cell-index: Specifies the controller used +- reg: offset and length of the register set for the device. +- reg-names : names to refer to register sets related to this device +- gdsc-supply: Phandle for gdsc regulator device node. +- vddio-supply: Phandle for vddio regulator device node. +- clocks: List of Phandles for clock device nodes + needed by the device. +- clock-names: List of clock names needed by the device. +- clock-rate: List of clock rates in Hz. + +Optional properties: +- label: A string used to describe the driver used. +- vcca-supply: Phandle for vcca regulator device node. + + +- qcom,dsi-pll-ssc-en: Boolean property to indicate that ssc is enabled. +- qcom,dsi-pll-ssc-mode: Spread-spectrum clocking. It can be either "down-spread" + or "center-spread". Default is "down-spread" if it is not specified. +- qcom,ssc-frequency-hz: Integer property to specify the spread frequency + to be programmed for the SSC. +- qcom,ssc-ppm: Integer property to specify the Parts per Million + value of SSC. + +- qcom,platform-supply-entries: A node that lists the elements of the supply. There + can be more than one instance of this binding, + in which case the entry would be appended with + the supply entry index. + e.g. qcom,platform-supply-entry@0 + - reg: offset and length of the register set for the device. + -- qcom,supply-name: name of the supply (vdd/vdda/vddio) + -- qcom,supply-min-voltage: minimum voltage level (uV) + -- qcom,supply-max-voltage: maximum voltage level (uV) + -- qcom,supply-enable-load: load drawn (uA) from enabled supply + -- qcom,supply-disable-load: load drawn (uA) from disabled supply + -- qcom,supply-pre-on-sleep: time to sleep (ms) before turning on + -- qcom,supply-post-on-sleep: time to sleep (ms) after turning on + -- qcom,supply-pre-off-sleep: time to sleep (ms) before turning off + -- qcom,supply-post-off-sleep: time to sleep (ms) after turning off + +Example: + mdss_dsi0_pll: qcom,mdss_dsi_pll@fd922A00 { + compatible = "qcom,mdss_dsi_pll_8974"; + label = "MDSS DSI 0 PLL"; + cell-index = <0>; + + reg = <0xfd922A00 0xD4>, + <0xfd922900 0x64>, + <0xfd8c2300 0x8>; + reg-names = "pll_base", "dynamic_pll_base", "gdsc_base"; + gdsc-supply = <&gdsc_mdss>; + vddio-supply = <&pm8941_l12>; + vcca-supply = <&pm8941_l28>; + + clocks = <&clock_gcc clk_gcc_mdss_mdp_clk>, + <&clock_gcc clk_gcc_mdss_ahb_clk>, + <&clock_gcc clk_gcc_mdss_axi_clk>; + clock-names = "mdp_core_clk", "iface_clk", "bus_clk"; + clock-rate = <0>, <0>, <0>; + + qcom,dsi-pll-slave; + qcom,dsi-pll-ssc-en; + qcom,dsi-pll-ssc-mode = "down-spread"; + qcom,ssc-frequency-hz = <30000>; + qcom,ssc-ppm = <5000>; + + qcom,platform-supply-entries { + #address-cells = <1>; + #size-cells = <0>; + + qcom,platform-supply-entry@0 { + reg = <0>; + qcom,supply-name = "vddio"; + qcom,supply-min-voltage = <1800000>; + qcom,supply-max-voltage = <1800000>; + qcom,supply-enable-load = <100000>; + qcom,supply-disable-load = <100>; + qcom,supply-pre-on-sleep = <0>; + qcom,supply-post-on-sleep = <20>; + qcom,supply-pre-off-sleep = <0>; + qcom,supply-post-off-sleep = <0>; + }; + }; + }; + diff --git a/arch/arm64/boot/dts/vendor/qcom/display/bindings/sde-dp.txt b/arch/arm64/boot/dts/vendor/qcom/display/bindings/sde-dp.txt new file mode 100644 index 000000000000..78812304b887 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/bindings/sde-dp.txt @@ -0,0 +1,237 @@ +Qualcomm Technologies, Inc. +sde-dp is the master Display Port device which supports DP host controllers that are compatible with VESA Display Port interface specification. +DP Controller: Required properties: +- compatible: Should be "qcom,dp-display". +- reg: Base address and length of DP hardware's memory mapped regions. +- reg-names: A list of strings that name the list of regs. "dp_ctrl" - DP controller memory region. + "dp_phy" - DP PHY memory region. + "dp_ln_tx0" - USB3 DP PHY combo TX-0 lane memory region. + "dp_ln_tx1" - USB3 DP PHY combo TX-1 lane memory region. + "dp_mmss_cc" - Display Clock Control memory region. + "qfprom_physical" - QFPROM Phys memory region. + "dp_pll" - USB3 DP combo PLL memory region. + "usb3_dp_com" - USB3 DP PHY combo memory region. + "hdcp_physical" - DP HDCP memory region. +- cell-index: Specifies the controller instance. +- clocks: Clocks required for Display Port operation. +- clock-names: Names of the clocks corresponding to handles. Following clocks are required: + "core_aux_clk", "core_usb_ref_clk_src","core_usb_ref_clk", "core_usb_cfg_ahb_clk", + "core_usb_pipe_clk", "ctrl_link_clk", "ctrl_link_iface_clk", "ctrl_crypto_clk", + "ctrl_pixel_clk", "pixel_clk_rcg", "pixel_parent". +- gdsc-supply: phandle to gdsc regulator node. +- vdda-1p2-supply: phandle to vdda 1.2V regulator node. +- vdda-0p9-supply: phandle to vdda 0.9V regulator node. +- interrupt-parent phandle to the interrupt parent device node. +- interrupts: The interrupt signal from the DSI block. +- qcom,aux-en-gpio: Specifies the aux-channel enable gpio. +- qcom,aux-sel-gpio: Specifies the aux-channel select gpio. +- qcom,usbplug-cc-gpio: Specifies the usbplug orientation gpio. +- qcom,aux-cfg0-settings: Specifies the DP AUX configuration 0 settings. The first + entry in this array corresponds to the register offset + within DP AUX, while the remaining entries indicate the + programmable values. +- qcom,aux-cfg1-settings: Specifies the DP AUX configuration 1 settings. The first + entry in this array corresponds to the register offset + within DP AUX, while the remaining entries indicate the + programmable values. +- qcom,aux-cfg2-settings: Specifies the DP AUX configuration 2 settings. The first + entry in this array corresponds to the register offset + within DP AUX, while the remaining entries indicate the + programmable values. +- qcom,aux-cfg3-settings: Specifies the DP AUX configuration 3 settings. The first + entry in this array corresponds to the register offset + within DP AUX, while the remaining entries indicate the + programmable values. +- qcom,aux-cfg4-settings: Specifies the DP AUX configuration 4 settings. The first + entry in this array corresponds to the register offset + within DP AUX, while the remaining entries indicate the + programmable values. +- qcom,aux-cfg5-settings: Specifies the DP AUX configuration 5 settings. The first + entry in this array corresponds to the register offset + within DP AUX, while the remaining entries indicate the + programmable values. +- qcom,aux-cfg6-settings: Specifies the DP AUX configuration 6 settings. The first + entry in this array corresponds to the register offset + within DP AUX, while the remaining entries indicate the + programmable values. +- qcom,aux-cfg7-settings: Specifies the DP AUX configuration 7 settings. The first + entry in this array corresponds to the register offset + within DP AUX, while the remaining entries indicate the + programmable values. +- qcom,aux-cfg8-settings: Specifies the DP AUX configuration 8 settings. The first + entry in this array corresponds to the register offset + within DP AUX, while the remaining entries indicate the + programmable values. +- qcom,aux-cfg9-settings: Specifies the DP AUX configuration 9 settings. The first + entry in this array corresponds to the register offset + within DP AUX, while the remaining entries indicate the + programmable values. +- qcom,max-pclk-frequency-khz: An integer specifying the max. pixel clock in KHz supported by Display Port. +- qcom,mst-enable: MST feature enable control node. +- qcom,dsc-feature-enable: DSC feature enable control node. +- qcom,fec-feature-enable: FEC feature enable control node. +- qcom,max-dp-dsc-blks: An integer specifying the max. DSC blocks available for Display port. +- qcom,max-dp-dsc-input-width-pixs: An integer specifying the max. input width of pixels for each DSC block. +- qcom,dp-usbpd-detection: Phandle for the PMI regulator node for USB PHY PD detection. +- qcom,dp-aux-switch: Phandle for the driver used to program the AUX switch for Display Port orientation. +- qcom,dp-hpd-gpio: HPD gpio for direct DP connector without USB PHY or AUX switch. +- qcom,dp-gpio-aux-switch: Gpio DP AUX switch chipset support. +- qcom,<type>-supply-entries: A node that lists the elements of the supply used by the a particular "type" of DSI module. The module "types" + can be "core", "ctrl", and "phy". Within the same type, + there can be more than one instance of this binding, + in which case the entry would be appended with the + supply entry index. + e.g. qcom,ctrl-supply-entry@0 + -- qcom,supply-name: name of the supply (vdd/vdda/vddio) + -- qcom,supply-min-voltage: minimum voltage level (uV) + -- qcom,supply-max-voltage: maximum voltage level (uV) + -- qcom,supply-enable-load: load drawn (uA) from enabled supply + -- qcom,supply-disable-load: load drawn (uA) from disabled supply + -- qcom,supply-pre-on-sleep: time to sleep (ms) before turning on + -- qcom,supply-post-on-sleep: time to sleep (ms) after turning on + -- qcom,supply-pre-off-sleep: time to sleep (ms) before turning off + -- qcom,supply-post-off-sleep: time to sleep (ms) after turning off + +msm_ext_disp is a device which manages the interaction between external +display interfaces, e.g. Display Port, and the audio subsystem. + +Optional properties: +- qcom,ext-disp: phandle for msm-ext-display module +- compatible: Must be "qcom,msm-ext-disp" +- qcom,dp-low-power-hw-hpd: Low power hardware HPD feature enable control node +- qcom,phy-version: Phy version +- qcom,pn-swap-lane-map: P/N swap configuration of each lane +- pinctrl-names: List of names to assign mdss pin states defined in pinctrl device node + Refer to pinctrl-bindings.txt +- pinctrl-<0..n>: Lists phandles each pointing to the pin configuration node within a pin + controller. These pin configurations are installed in the pinctrl + device node. Refer to pinctrl-bindings.txt +- qcom,max-lclk-frequency-khz: An integer specifying the max. link clock in KHz supported by Display Port. +- qcom,mst-fixed-topology-ports: u32 values of which MST output port to reserve, start from one + +[Optional child nodes]: These nodes are for devices which are +dependent on msm_ext_disp. If msm_ext_disp is disabled then +these devices will be disabled as well. Ex. Audio Codec device. + +- ext_disp_audio_codec: Node for Audio Codec. +- compatible : "qcom,msm-ext-disp-audio-codec-rx"; + +Example: + ext_disp: qcom,msm-ext-disp { + compatible = "qcom,msm-ext-disp"; + ext_disp_audio_codec: qcom,msm-ext-disp-audio-codec-rx { + compatible = "qcom,msm-ext-disp-audio-codec-rx"; + }; + }; + + sde_dp: qcom,dp_display@0{ + cell-index = <0>; + compatible = "qcom,dp-display"; + + gdsc-supply = <&mdss_core_gdsc>; + vdda-1p2-supply = <&pm8998_l26>; + vdda-0p9-supply = <&pm8998_l1>; + + reg = <0xae90000 0xa84>, + <0x88eaa00 0x200>, + <0x88ea200 0x200>, + <0x88ea600 0x200>, + <0xaf02000 0x1a0>, + <0x780000 0x621c>, + <0x88ea030 0x10>, + <0x88e8000 0x621c>, + <0x0aee1000 0x034>; + reg-names = "dp_ctrl", "dp_phy", "dp_ln_tx0", "dp_ln_tx1", + "dp_mmss_cc", "qfprom_physical", "dp_pll", + "usb3_dp_com", "hdcp_physical"; + + interrupt-parent = <&mdss_mdp>; + interrupts = <12 0>; + + clocks = <&clock_dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&clock_rpmh RPMH_CXO_CLK>, + <&clock_gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&clock_gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&clock_gcc GCC_USB3_PRIM_PHY_PIPE_CLK>, + <&clock_dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&clock_dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&clock_dispcc DISP_CC_MDSS_DP_CRYPTO_CLK>, + <&clock_dispcc DISP_CC_MDSS_DP_PIXEL_CLK>, + <&clock_dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>, + <&mdss_dp_pll DP_VCO_DIVIDED_CLK_SRC_MUX>; + clock-names = "core_aux_clk", "core_usb_ref_clk_src", + "core_usb_ref_clk", "core_usb_cfg_ahb_clk", + "core_usb_pipe_clk", "ctrl_link_clk", + "ctrl_link_iface_clk", "ctrl_crypto_clk", + "ctrl_pixel_clk", "pixel_clk_rcg", "pixel_parent"; + + qcom,dp-usbpd-detection = <&pm8150b_pdphy>; + qcom,ext-disp = <&ext_disp>; + qcom,phy-version = <0x420>; + qcom,dp-aux-switch = <&fsa4480>; + + qcom,aux-cfg0-settings = [1c 00]; + qcom,aux-cfg1-settings = [20 13 23 1d]; + qcom,aux-cfg2-settings = [24 00]; + qcom,aux-cfg3-settings = [28 00]; + qcom,aux-cfg4-settings = [2c 0a]; + qcom,aux-cfg5-settings = [30 26]; + qcom,aux-cfg6-settings = [34 0a]; + qcom,aux-cfg7-settings = [38 03]; + qcom,aux-cfg8-settings = [3c bb]; + qcom,aux-cfg9-settings = [40 03]; + qcom,max-pclk-frequency-khz = <593470>; + qcom,mst-enable; + qcom,dsc-feature-enable; + qcom,fec-feature-enable; + qcom,max-dp-dsc-blks = <2>; + qcom,max-dp-dsc-input-width-pixs = <2048>; + pinctrl-names = "mdss_dp_active", "mdss_dp_sleep"; + pinctrl-0 = <&sde_dp_aux_active &sde_dp_usbplug_cc_active>; + pinctrl-1 = <&sde_dp_aux_suspend &sde_dp_usbplug_cc_suspend>; + qcom,aux-en-gpio = <&tlmm 43 0>; + qcom,aux-sel-gpio = <&tlmm 51 0>; + qcom,usbplug-cc-gpio = <&tlmm 38 0>; + qcom,core-supply-entries { + #address-cells = <1>; + #size-cells = <0>; + + qcom,core-supply-entry@0 { + reg = <0>; + qcom,supply-name = "gdsc"; + qcom,supply-min-voltage = <0>; + qcom,supply-max-voltage = <0>; + qcom,supply-enable-load = <0>; + qcom,supply-disable-load = <0>; + }; + }; + + qcom,ctrl-supply-entries { + #address-cells = <1>; + #size-cells = <0>; + + qcom,ctrl-supply-entry@0 { + reg = <0>; + qcom,supply-name = "vdda-1p2"; + qcom,supply-min-voltage = <1200000>; + qcom,supply-max-voltage = <1200000>; + qcom,supply-enable-load = <21800>; + qcom,supply-disable-load = <4>; + }; + }; + + qcom,phy-supply-entries { + #address-cells = <1>; + #size-cells = <0>; + + qcom,phy-supply-entry@0 { + reg = <0>; + qcom,supply-name = "vdda-0p9"; + qcom,supply-min-voltage = <880000>; + qcom,supply-max-voltage = <880000>; + qcom,supply-enable-load = <36000>; + qcom,supply-disable-load = <32>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/bindings/sde-dsi.txt b/arch/arm64/boot/dts/vendor/qcom/display/bindings/sde-dsi.txt new file mode 100644 index 000000000000..e09261d55b31 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/bindings/sde-dsi.txt @@ -0,0 +1,118 @@ +Qualcomm Technologies, Inc. + +mdss-dsi is the master DSI device which supports multiple DSI host controllers +that are compatible with MIPI display serial interface specification. + +DSI Controller: +Required properties: +- compatible: Should be "qcom,dsi-ctrl-hw-v<version>". Supported + versions include 1.4, 2.0 and 2.2. + eg: qcom,dsi-ctrl-hw-v1.4, qcom,dsi-ctrl-hw-v2.0, + qcom,dsi-ctrl-hw-v2.2, qcom,dsi-ctrl-hw-v2.3, + qcom,dsi-ctrl-hw-v2.4 + And for dsi phy driver: + qcom,dsi-phy-v0.0-hpm, qcom,dsi-phy-v0.0-lpm, + qcom,dsi-phy-v1.0, qcom,dsi-phy-v2.0, + qcom,dsi-phy-v3.0, qcom,dsi-phy-v4.0, qcom,dsi-phy-v4.1 +- reg: Base address and length of DSI controller's memory + mapped regions. +- reg-names: A list of strings that name the list of regs. + "dsi_ctrl" - DSI controller memory region. + "mmss_misc" - MMSS misc memory region. +- cell-index: Specifies the controller instance. +- clocks: Clocks required for DSI controller operation. +- clock-names: Names of the clocks corresponding to handles. Following + clocks are required: + "mdp_core_clk" + "iface_clk" + "core_mmss_clk" + "bus_clk" + "byte_clk" + "pixel_clk" + "core_clk" + "byte_clk_rcg" + "pixel_clk_rcg" +- gdsc-supply: phandle to gdsc regulator node. +- vdda-supply: phandle to vdda regulator node. +- vcca-supply: phandle to vcca regulator node. +- interrupt-parent phandle to the interrupt parent device node. +- interrupts: The interrupt signal from the DSI block. +- qcom,dsi-default-panel: Specifies the default panel. +- qcom,mdp: Specifies the mdp node which can find panel node from this. + +Bus Scaling Data: +- qcom,msm-bus,name: String property describing MDSS client. +- qcom,msm-bus,num-cases: This is the number of bus scaling use cases + defined in the vectors property. This must be + set to <2> for MDSS DSI driver where use-case 0 + is used to remove BW votes from the system. Use + case 1 is used to generate bandwidth requestes + when sending command packets. +- qcom,msm-bus,num-paths: This represents number of paths in each bus + scaling usecase. This value depends on number of + AXI master ports dedicated to MDSS for + particular chipset. +- qcom,msm-bus,vectors-KBps: A series of 4 cell properties, with a format + of (src, dst, ab, ib) which is defined at + Documentation/devicetree/bindings/arm/msm/msm_bus.txt. + DSI driver should always set average bandwidth + (ab) to 0 and always use instantaneous + bandwidth(ib) values. + +Optional properties: +- label: String to describe controller. +- qcom,platform-te-gpio: Specifies the gpio used for TE. +- qcom,panel-te-source: Specifies the source pin for Vsync from panel or WD Timer. +- qcom,dsi-ctrl: handle to dsi controller device +- qcom,dsi-phy: handle to dsi phy device +- qcom,dsi-ctrl-num: Specifies the DSI controllers to use for primary panel +- qcom,dsi-sec-ctrl-num: Specifies the DSI controllers to use for secondary panel +- qcom,dsi-phy-num: Specifies the DSI PHYs to use for primary panel +- qcom,dsi-sec-phy-num: Specifies the DSI PHYs to use for secondary panel +- qcom,dsi-select-clocks: Specifies the required clocks to use for primary panel +- qcom,dsi-select-sec-clocks: Specifies the required clocks to use for secondary panel +- qcom,dsi-display-list: Specifies the list of supported displays. +- qcom,dsi-manager: Specifies dsi manager is present +- qcom,dsi-display: Specifies dsi display is present +- qcom,hdmi-display: Specifies hdmi is present +- qcom,dp-display: Specified dp is present +- qcom,<type>-supply-entries: A node that lists the elements of the supply used by the + a particular "type" of DSI module. The module "types" + can be "core", "ctrl", and "phy". Within the same type, + there can be more than one instance of this binding, + in which case the entry would be appended with the + supply entry index. + e.g. qcom,ctrl-supply-entry@0 + -- qcom,supply-name: name of the supply (vdd/vdda/vddio) + -- qcom,supply-min-voltage: minimum voltage level (uV) + -- qcom,supply-max-voltage: maximum voltage level (uV) + -- qcom,supply-enable-load: load drawn (uA) from enabled supply + -- qcom,supply-disable-load: load drawn (uA) from disabled supply + -- qcom,supply-pre-on-sleep: time to sleep (ms) before turning on + -- qcom,supply-post-on-sleep: time to sleep (ms) after turning on + -- qcom,supply-pre-off-sleep: time to sleep (ms) before turning off + -- qcom,supply-post-off-sleep: time to sleep (ms) after turning off +- qcom,mdss-mdp-transfer-time-us: Specifies the dsi transfer time for command mode + panels in microseconds. Driver uses this number to adjust + the clock rate according to the expected transfer time. + Increasing this value would slow down the mdp processing + and can result in slower performance. + Decreasing this value can speed up the mdp processing, + but this can also impact power consumption. + As a rule this time should not be higher than the time + that would be expected with the processing at the + dsi link rate since anyways this would be the maximum + transfer time that could be achieved. + If ping pong split enabled, this time should not be higher + than two times the dsi link rate time. + If the property is not specified, then the default value is 14000 us. +- qcom,dsi-phy-isolation-enabled: A boolean property enables the phy isolation from dsi + controller. This must be enabled for debugging purpose + only with simulator panel. It should not be enabled for + normal DSI panels. +- - qcom,null-insertion-enabled: A boolean to enable NULL packet insertion feature for DSI controller. +- ports: This video port is used when external bridge is present. + The connection is modeled using the OF graph bindings + specified in Documentation/devicetree/bindings/graph.txt. + Video port 0 reg 0 is for the bridge output. The remote + endpoint phandle should be mipi_dsi_device device node. diff --git a/arch/arm64/boot/dts/vendor/qcom/display/bindings/sde-rsc.txt b/arch/arm64/boot/dts/vendor/qcom/display/bindings/sde-rsc.txt new file mode 100644 index 000000000000..3af5629ca467 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/bindings/sde-rsc.txt @@ -0,0 +1,97 @@ +Qualcomm Technologies, Inc. SDE RSC + +Snapdragon Display Engine implements display rsc to driver +display core to different modes for power saving + +Required properties +- compatible: "qcom,sde-rsc" + "qcom,sde-rsc-rpmh" +- reg: Offset and length of the register set for + the device. +- reg-names: Names to refer to register sets related + to this device + +Optional properties: +- clocks: List of phandles for clock device nodes + needed by the device. +- clock-names: List of clock names needed by the device. +- vdd-supply: phandle for vdd regulator device node. +- qcom,sde-rsc-version: U32 property represents the rsc version. It helps to + select correct sequence for sde rsc based on version. +- qcom,sde-dram-channels: U32 property represents the number of channels in the + Bus memory controller. +- qcom,sde-num-nrt-paths: U32 property represents the number of non-realtime + paths in each Bus Scaling Usecase. This value depends on + number of AXI ports that are dedicated to non-realtime VBIF + for particular chipset. + These paths must be defined after rt-paths in + "qcom,msm-bus,vectors-KBps" vector request. + +Bus Scaling Subnodes: +- qcom,sde-data-bus: Property to provide Bus scaling for data bus access for + sde blocks. +- qcom,sde-llcc-bus: Property to provide Bus scaling for data bus access for + mnoc to llcc. +- qcom,sde-ebi-bus: Property to provide Bus scaling for data bus access for + llcc to ebi. + +Bus Scaling Data: +- qcom,msm-bus,name: String property describing client name. +- qcom,msm-bus,active-only: Boolean context flag for requests in active or + dual (active & sleep) contex +- qcom,msm-bus,num-cases: This is the number of Bus Scaling use cases + defined in the vectors property. +- qcom,msm-bus,num-paths: This represents the number of paths in each + Bus Scaling Usecase. +- qcom,msm-bus,vectors-KBps: * A series of 4 cell properties, with a format + of (src, dst, ab, ib) which is defined at + Documentation/devicetree/bindings/arm/msm/msm_bus.txt + * Current values of src & dst are defined at + include/linux/msm-bus-board.h +Example: + sde_rscc { + cell-index = <0>; + compatible = "qcom,sde-rsc"; + reg = <0xaf20000 0x1c44>, + <0xaf30000 0x3fd4>; + reg-names = "drv", "wrapper"; + clocks = <&clock_mmss clk_mdss_ahb_clk>, + <&clock_mmss clk_mdss_axi_clk>; + clock-names = "iface_clk", "bus_clk"; + vdd-supply = <&gdsc_mdss>; + + qcom,sde-rsc-version = <1>; + qcom,sde-dram-channels = <2>; + qcom,sde-num-nrt-paths = <1>; + + qcom,sde-data-bus { + qcom,msm-bus,name = "sde_rsc"; + qcom,msm-bus,active-only; + qcom,msm-bus,num-cases = <3>; + qcom,msm-bus,num-paths = <2>; + qcom,msm-bus,vectors-KBps = + <22 512 0 0>, <23 512 0 0>, + <22 512 0 6400000>, <23 512 0 6400000>, + <22 512 0 6400000>, <23 512 0 6400000>; + }; + qcom,sde-llcc-bus { + qcom,msm-bus,name = "sde_rsc_llcc"; + qcom,msm-bus,active-only; + qcom,msm-bus,num-cases = <3>; + qcom,msm-bus,num-paths = <1>; + qcom,msm-bus,vectors-KBps = + <20001 20513 0 0>, + <20001 20513 0 6400000>, + <20001 20513 0 6400000>; + }; + qcom,sde-ebi-bus { + qcom,msm-bus,name = "sde_rsc_ebi"; + qcom,msm-bus,active-only; + qcom,msm-bus,num-cases = <3>; + qcom,msm-bus,num-paths = <1>; + qcom,msm-bus,vectors-KBps = + <20000 20512 0 0>, + <20000 20512 0 6400000>, + <20000 20512 0 6400000>; + }; + }; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/bindings/sde-wb.txt b/arch/arm64/boot/dts/vendor/qcom/display/bindings/sde-wb.txt new file mode 100644 index 000000000000..90093e41a917 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/bindings/sde-wb.txt @@ -0,0 +1,23 @@ +Qualcomm Technologies, Inc. Snapdragon Display Engine (SDE) writeback display + +Required properties: +- compatible: "qcom,wb-display" + +Optional properties: +- cell-index: Index of writeback device instance. + Default to 0 if not specified. +- label: String to describe this writeback display. + Default to "unknown" if not specified. + +Example: + +/ { + ... + + sde_wb: qcom,wb-display { + compatible = "qcom,wb-display"; + cell-index = <2>; + label = "wb_display"; + }; + +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/bindings/sde.txt b/arch/arm64/boot/dts/vendor/qcom/display/bindings/sde.txt new file mode 100644 index 000000000000..c4c6698514e8 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/bindings/sde.txt @@ -0,0 +1,888 @@ +Qualcomm Technologies, Inc. SDE KMS + +Snapdragon Display Engine implements Linux DRM/KMS APIs to drive user +interface to different panel interfaces. SDE driver is the core of +display subsystem which manage all data paths to different panel interfaces. + +Required properties +- compatible: Must be "qcom,sde-kms" +- compatible: "msm-hdmi-audio-codec-rx"; +- reg: Offset and length of the register set for the device. +- reg-names : Names to refer to register sets related to this device +- clocks: List of Phandles for clock device nodes + needed by the device. +- clock-names: List of clock names needed by the device. +- mmagic-supply: Phandle for mmagic mdss supply regulator device node. +- vdd-supply: Phandle for vdd regulator device node. +- interrupt-parent: Must be core interrupt controller. +- interrupts: Interrupt associated with MDSS. +- interrupt-controller: Mark the device node as an interrupt controller. +- #interrupt-cells: Should be one. The first cell is interrupt number. +- iommus: Specifies the SID's used by this context bank. +- qcom,sde-sspp-type: Array of strings for SDE source surface pipes type information. + A source pipe can be "vig", "rgb", "dma" or "cursor" type. + Number of xin ids defined should match the number of offsets + defined in property: qcom,sde-sspp-off. +- qcom,sde-sspp-off: Array of offset for SDE source surface pipes. The offsets + are calculated from register "mdp_phys" defined in + reg property + "sde-off". The number of offsets defined here should + reflect the amount of pipes that can be active in SDE for + this configuration. +- qcom,sde-sspp-xin-id: Array of VBIF clients ids (xins) corresponding + to the respective source pipes. Number of xin ids + defined should match the number of offsets + defined in property: qcom,sde-sspp-off. +- qcom,sde-ctl-off: Array of offset addresses for the available ctl + hw blocks within SDE, these offsets are + calculated from register "mdp_phys" defined in + reg property. The number of ctl offsets defined + here should reflect the number of control paths + that can be configured concurrently on SDE for + this configuration. +- qcom,sde-wb-off: Array of offset addresses for the programmable + writeback blocks within SDE. +- qcom,sde-wb-xin-id: Array of VBIF clients ids (xins) corresponding + to the respective writeback. Number of xin ids + defined should match the number of offsets + defined in property: qcom,sde-wb-off. +- qcom,sde-mixer-off: Array of offset addresses for the available + mixer blocks that can drive data to panel + interfaces. These offsets are be calculated from + register "mdp_phys" defined in reg property. + The number of offsets defined should reflect the + amount of mixers that can drive data to a panel + interface. +- qcom,sde-dspp-top-off: Offset address for the dspp top block. + The offset is calculated from register "mdp_phys" + defined in reg property. +- qcom,sde-dspp-off: Array of offset addresses for the available dspp + blocks. These offsets are calculated from + register "mdp_phys" defined in reg property. +- qcom,sde-pp-off: Array of offset addresses for the available + pingpong blocks. These offsets are calculated + from register "mdp_phys" defined in reg property. +- qcom,sde-pp-slave: Array of flags indicating whether each ping pong + block may be configured as a pp slave. +- qcom,sde-pp-merge-3d-id: Array of index ID values for the merge 3d block + connected to each pingpong, starting at 0. +- qcom,sde-merge-3d-off: Array of offset addresses for the available + merge 3d blocks. These offsets are calculated + from register "mdp_phys" defined in reg property. +- qcom,sde-intf-off: Array of offset addresses for the available SDE + interface blocks that can drive data to a + panel controller. The offsets are calculated + from "mdp_phys" defined in reg property. The number + of offsets defined should reflect the number of + programmable interface blocks available in hardware. +- qcom,sde-mixer-blend-op-off Array of offset addresses for the available + blending stages. The offsets are relative to + qcom,sde-mixer-off. +- qcom,sde-mixer-pair-mask Array of mixer numbers that can be paired with + mixer number corresponding to the array index. + +Optional properties: +- clock-rate: List of clock rates in Hz. +- clock-max-rate: List of maximum clock rate in Hz that this device supports. +- qcom,platform-supply-entries: A node that lists the elements of the supply. There + can be more than one instance of this binding, + in which case the entry would be appended with + the supply entry index. + e.g. qcom,platform-supply-entry@0 + -- reg: offset and length of the register set for the device. + -- qcom,supply-name: name of the supply (vdd/vdda/vddio) + -- qcom,supply-min-voltage: minimum voltage level (uV) + -- qcom,supply-max-voltage: maximum voltage level (uV) + -- qcom,supply-enable-load: load drawn (uA) from enabled supply + -- qcom,supply-disable-load: load drawn (uA) from disabled supply + -- qcom,supply-pre-on-sleep: time to sleep (ms) before turning on + -- qcom,supply-post-on-sleep: time to sleep (ms) after turning on + -- qcom,supply-pre-off-sleep: time to sleep (ms) before turning off + -- qcom,supply-post-off-sleep: time to sleep (ms) after turning off +- qcom,sde-sspp-src-size: A u32 value indicates the address range for each sspp. +- qcom,sde-mixer-size: A u32 value indicates the address range for each mixer. +- qcom,sde-ctl-size: A u32 value indicates the address range for each ctl. +- qcom,sde-dspp-size: A u32 value indicates the address range for each dspp. +- qcom,sde-intf-size: A u32 value indicates the address range for each intf. +- qcom,sde-dsc-size: A u32 value indicates the address range for each dsc. +- qcom,sde-cdm-size: A u32 value indicates the address range for each cdm. +- qcom,sde-pp-size: A u32 value indicates the address range for each pingpong. +- qcom,sde-merge-3d-size: A u32 value indicates the address range for each merge 3d. +- qcom,sde-wb-size: A u32 value indicates the address range for each writeback. +- qcom,sde-len: A u32 entry for SDE address range. +- qcom,sde-intf-max-prefetch-lines: Array of u32 values for max prefetch lines on + each interface. +- qcom,sde-sspp-linewidth: A u32 value indicates the max sspp line width. +- qcom,sde-mixer-linewidth: A u32 value indicates the max mixer line width. +- qcom,sde-wb-linewidth: A u32 value indicates the max writeback line width. +- qcom,sde-sspp-scale-size: A u32 value indicates the scaling block size on sspp. +- qcom,sde-mixer-blendstages: A u32 value indicates the max mixer blend stages for + alpha blending. +- qcom,sde-qseed-type: A string entry indiates qseed support on sspp and wb. + It supports "qssedv3" and "qseedv2" entries for qseed + type. By default "qseedv2" is used if this optional property + is not defined. +- qcom,sde-csc-type: A string entry indicates csc support on sspp and wb. + It supports "csc" and "csc-10bit" entries for csc + type. +- qcom,sde-highest-bank-bit: A u32 property to indicate GPU/Camera/Video highest memory + bank bit used for tile format buffers. +- qcom,sde-ubwc-version: Property to specify the UBWC feature version. +- qcom,sde-ubwc-static: Property to specify the default UBWC static + configuration value. +- qcom,sde-ubwc-bw-calc-version: A u32 property to specify version of UBWC bandwidth + calculation algorithm +- qcom,sde-ubwc-swizzle: Property to specify the default UBWC swizzle + configuration value. +- qcom,sde-smart-panel-align-mode: A u32 property to specify the align mode for + split display on smart panel. Possible values: + 0x0 - no alignment + 0xc - align at start of frame + 0xd - align at start of line +- qcom,sde-panic-per-pipe: Boolean property to indicate if panic signal + control feature is available on each source pipe. +- qcom,sde-has-src-split: Boolean property to indicate if source split + feature is available or not. +- qcom,sde-has-dim-layer: Boolean property to indicate if mixer has dim layer + feature is available or not. +- qcom,sde-has-idle-pc: Boolean property to indicate if target has idle + power collapse feature available or not. +- qcom,fullsize-va-map: Boolean property to indicate smmu mapping range + for mdp should be full range (4GB). +- qcom,sde-has-mixer-gc: Boolean property to indicate if mixer has gamma correction + feature available or not. +- qcom,sde-has-dest-scaler: Boolean property to indicate if destination scaler + feature is available or not. +- qcom,sde-max-dest-scaler-input-linewidth: A u32 value indicates the + maximum input line width to destination scaler. +- qcom,sde-max-dest-scaler-output-linewidth: A u32 value indicates the + maximum output line width of destination scaler. +- qcom,sde-dest-scaler-top-off: A u32 value provides the + offset from mdp base to destination scaler block. +- qcom,sde-dest-scaler-top-size: A u32 value indicates the address range for ds top +- qcom,sde-dest-scaler-off: Array of u32 offsets indicate the qseed3 scaler blocks + offset from destination scaler top offset. +- qcom,sde-dest-scaler-size: A u32 value indicates the address range for each scaler block +- qcom,sde-sspp-clk-ctrl: Array of offsets describing clk control + offsets for dynamic clock gating. 1st value + in the array represents offset of the control + register. 2nd value represents bit offset within + control register. Number of offsets defined should + match the number of offsets defined in + property: qcom,sde-sspp-off +- qcom,sde-sspp-clk-status: Array of offsets describing clk status + offsets for dynamic clock gating. 1st value + in the array represents offset of the status + register. 2nd value represents bit offset within + control register. Number of offsets defined should + match the number of offsets defined in + property: qcom,sde-sspp-off. +- qcom,sde-sspp-excl-rect: Array of u32 values indicating exclusion rectangle + support on each sspp. +- qcom,sde-sspp-smart-dma-priority: Array of u32 values indicating hw pipe + priority of secondary rectangles when smart dma + is supported. Number of priority values should + match the number of offsets defined in + qcom,sde-sspp-off node. Zero indicates no support + for smart dma for the sspp. +- qcom,sde-smart-dma-rev: A string entry indicating the smart dma version + supported on the device. Supported entries are + "smart_dma_v1" and "smart_dma_v2". +- qcom,sde-intf-type: Array of string provides the interface type information. + Possible string values + "dsi" - dsi display interface + "dp" - Display Port interface + "hdmi" - HDMI display interface + An interface is considered as "none" if interface type + is not defined. +- qcom,sde-off: SDE offset from "mdp_phys" defined in reg property. +- qcom,sde-cdm-off: Array of offset addresses for the available + cdm blocks. These offsets will be calculated from + register "mdp_phys" defined in reg property. +- qcom,sde-vbif-off: Array of offset addresses for the available + vbif blocks. These offsets will be calculated from + register "vbif_phys" defined in reg property. +- qcom,sde-vbif-size: A u32 value indicates the vbif block address range. +- qcom,sde-uidle-off: A u32 value with the offset for the uidle + block, from the "mdp_phys". +- qcom,sde-uidle-size: A u32 value indicates the uidle block address range. +- qcom,sde-te-off: A u32 offset indicates the te block offset on pingpong. + This offset is 0x0 by default. +- qcom,sde-te2-off: A u32 offset indicates the te2 block offset on pingpong. +- qcom,sde-te-size: A u32 value indicates the te block address range. +- qcom,sde-te2-size: A u32 value indicates the te2 block address range. +- qcom,sde-dsc-off: A u32 offset indicates the dsc block offset on pingpong. +- qcom,sde-qdss-off: A u32 offset indicates the qdss block offset. +- qcom,sde-dither-off: A u32 offset indicates the dither block offset on pingpong. +- qcom,sde-dither-version: A u32 value indicates the dither block version. +- qcom,sde-dither-size: A u32 value indicates the dither block address range. +- qcom,sde-sspp-vig-blocks: A node that lists the blocks inside the VIG hardware. The + block entries will contain the offset and version (if needed) + of each feature block. The presence of a block entry + indicates that the SSPP VIG contains that feature hardware. + e.g. qcom,sde-sspp-vig-blocks + -- qcom,sde-vig-csc-off: offset of CSC hardware + -- qcom,sde-vig-qseed-off: offset of QSEED hardware + -- qcom,sde-vig-qseed-size: A u32 address range for qseed scaler. + -- qcom,sde-vig-pcc: offset and version of PCC hardware + -- qcom,sde-vig-hsic: offset and version of global PA adjustment + -- qcom,sde-vig-memcolor: offset and version of PA memcolor hardware + -- qcom,sde-vig-gamut: offset and version of 3D LUT Gamut hardware + -- qcom,sde-vig-igc: offset and version of 1D LUT IGC hardware + -- qcom,sde-vig-inverse-pma: Boolean property to indicate if + inverse PMA feature is available on VIG pipe +- qcom,sde-sspp-dma-blocks: A node that lists the blocks inside the DMA hardware. There + can be more than one instance of this binding, in which case the + entry would be appended with dgm entry index. Each entry will + contain the offset and version (if needed) of each feature block. + The presence of a block entry indicates that the SSPP DMA contains + that feature hardware. + e.g. qcom,sde-sspp-dma-blocks + -- dgm@0 + -- qcom,sde-dma-igc: offset and version of DMA IGC + -- qcom,sde-dma-gc: offset and version of DMA GC + -- qcom,sde-dma-inverse-pma: Boolean property to indicate if + inverse PMA feature is available on DMA pipe + -- qcom,sde-dma-csc-off: offset of CSC hardware +- qcom,sde-sspp-rgb-blocks: A node that lists the blocks inside the RGB hardware. The + block entries will contain the offset and version (if needed) + of each feature block. The presence of a block entry + indicates that the SSPP RGB contains that feature hardware. + e.g. qcom,sde-sspp-rgb-blocks + -- qcom,sde-rgb-scaler-off: offset of RGB scaler hardware + -- qcom,sde-rgb-scaler-size: A u32 address range for scaler. + -- qcom,sde-rgb-pcc: offset and version of PCC hardware +- qcom,sde-dspp-blocks: A node that lists the blocks inside the DSPP hardware. The + block entries will contain the offset and version of each + feature block. The presence of a block entry indicates that + the DSPP contains that feature hardware. + e.g. qcom,sde-dspp-blocks + -- qcom,sde-dspp-pcc: offset and version of PCC hardware + -- qcom,sde-dspp-gc: offset and version of GC hardware + -- qcom,sde-dspp-igc: offset and version of IGC hardware + -- qcom,sde-dspp-hsic: offset and version of global PA adjustment + -- qcom,sde-dspp-memcolor: offset and version of PA memcolor hardware + -- qcom,sde-dspp-sixzone: offset and version of PA sixzone hardware + -- qcom,sde-dspp-gamut: offset and version of Gamut mapping hardware + -- qcom,sde-dspp-dither: offset and version of dither hardware + -- qcom,sde-dspp-hist: offset and version of histogram hardware + -- qcom,sde-dspp-vlut: offset and version of PA vLUT hardware +- qcom,sde-mixer-blocks: A node that lists the blocks inside the layer mixer hardware. The + block entries will contain the offset and version (if needed) + of each feature block. The presence of a block entry + indicates that the layer mixer contains that feature hardware. + e.g. qcom,sde-mixer-blocks + -- qcom,sde-mixer-gc: offset and version of mixer GC hardware +- qcom,sde-dspp-ad-off: Array of u32 offsets indicate the ad block offset from the + DSPP offset. Since AD hardware is represented as part of + DSPP block, the AD offsets must be offset from the + corresponding DSPP base. +- qcom,sde-dspp-ad-version A u32 value indicating the version of the AD hardware +- qcom,sde-dspp-ltm-version A u32 value indicating the major(upper 16 bits) and minor(lower 16 bits) + version of the LTM hardware +- qcom,sde-dspp-ltm-off: Array of u32 offsets indicate the LTM block offsets from the + DSPP offsets. Since LTM hardware is represented as part of + DSPP block, the LTM offsets are calculated based on the + corresponding DSPP base. +- qcom,sde-vbif-id: Array of vbif ids corresponding to the + offsets defined in property: qcom,sde-vbif-off. +- qcom,sde-vbif-default-ot-rd-limit: A u32 value indicates the default read OT limit +- qcom,sde-vbif-default-ot-wr-limit: A u32 value indicates the default write OT limit +- qcom,sde-vbif-dynamic-ot-rd-limit: A series of 2 cell property, with a format + of (pps, OT limit), where pps is pixel per second and + OT limit is the read limit to apply if the given + pps is not exceeded. +- qcom,sde-vbif-dynamic-ot-wr-limit: A series of 2 cell property, with a format + of (pps, OT limit), where pps is pixel per second and + OT limit is the write limit to apply if the given + pps is not exceeded. +- qcom,sde-vbif-memtype-0: Array of u32 vbif memory type settings, group 0 +- qcom,sde-vbif-memtype-1: Array of u32 vbif memory type settings, group 1 +- qcom,sde-wb-id: Array of writeback ids corresponding to the + offsets defined in property: qcom,sde-wb-off. +- qcom,sde-wb-clk-ctrl: Array of 2 cell property describing clk control + offsets for dynamic clock gating. 1st value + in the array represents offset of the control + register. 2nd value represents bit offset within + control register. Number of offsets defined should + match the number of offsets defined in + property: qcom,sde-wb-off +- qcom,sde-reg-dma-off: Offset of the register dma hardware block from + "regdma_phys" defined in reg property. +- qcom,sde-reg-dma-version: Version of the reg dma hardware block. +- qcom,sde-reg-dma-trigger-off: Offset of the lut dma trigger reg from "mdp_phys" + defined in reg property. +- qcom,sde-reg-dma-broadcast-disabled: Boolean property to indicate if broadcast + functionality in the register dma hardware block should be used. +- qcom,sde-reg-dma-xin-id: VBIF clients id (xin) corresponding + to the LUTDMA block. +- qcom,sde-reg-dma-clk-ctrl: Array of 2 cell property describing clk control + offsets for dynamic clock gating. 1st value + in the array represents offset of the control + register. 2nd value represents bit offset within + control register. +- qcom,sde-dram-channels: This represents the number of channels in the + Bus memory controller. +- qcom,sde-num-nrt-paths: Integer property represents the number of non-realtime + paths in each Bus Scaling Usecase. This value depends on + number of AXI ports that are dedicated to non-realtime VBIF + for particular chipset. + These paths must be defined after rt-paths in + "qcom,msm-bus,vectors-KBps" vector request. +- qcom,sde-max-bw-low-kbps: This value indicates the max bandwidth in Kbps + that can be supported without underflow. + This is a low bandwidth threshold which should + be applied in most scenarios to be safe from + underflows when unable to satisfy bandwidth + requirements. +- qcom,sde-max-bw-high-kbps: This value indicates the max bandwidth in Kbps + that can be supported without underflow in the + event where there is no VFE. + This is a high bandwidth threshold which can be + applied in scenarios where panel interface can + be more tolerant to memory latency such as + command mode panels. +- qcom,sde-core-ib-ff: A string entry indicating the fudge factor for + core ib calculation. +- qcom,sde-core-clk-ff: A string entry indicating the fudge factor for + core clock calculation. +- qcom,sde-min-core-ib-kbps: This u32 value indicates the minimum mnoc ib + vote in Kbps that can be reduced without hitting underflow. + BW calculation logic will choose the IB bandwidth requirement + based on usecase if this floor value is not defined. +- qcom,sde-min-llcc-ib-kbps: This u32 value indicates the minimum llcc ib + vote in Kbps that can be reduced without hitting underflow. + BW calculation logic will choose the IB bandwidth requirement + based on usecase if this floor value is not defined. +- qcom,sde-min-dram-ib-kbps: This u32 value indicates the minimum dram ib + vote in Kbps that can be reduced without hitting underflow. + BW calculation logic will choose the IB bandwidth requirement + based on usecase if this floor value is not defined. +- qcom,sde-comp-ratio-rt: A string entry indicating the compression ratio + for each supported compressed format on realtime interface. + The string is composed of one or more of + <fourcc code>/<vendor code>/<modifier>/<compression ratio> + separated with spaces. +- qcom,sde-comp-ratio-nrt: A string entry indicating the compression ratio + for each supported compressed format on non-realtime interface. + The string is composed of one or more of + <fourcc code>/<vendor code>/<modifier>/<compression ratio> + separated with spaces. +- qcom,sde-undersized-prefill-lines: A u32 value indicates the size of undersized prefill in lines. +- qcom,sde-xtra-prefill-lines: A u32 value indicates the extra prefill in lines. +- qcom,sde-dest-scale-prefill-lines: A u32 value indicates the latency of destination scaler in lines. +- qcom,sde-macrotile-prefill-lines: A u32 value indicates the latency of macrotile in lines. +- qcom,sde-yuv-nv12-prefill-lines: A u32 value indicates the latency of yuv/nv12 in lines. +- qcom,sde-linear-prefill-lines: A u32 value indicates the latency of linear in lines. +- qcom,sde-downscaling-prefill-lines: A u32 value indicates the latency of downscaling in lines. +- qcom,sde-max-per-pipe-bw-kbps: Array of u32 value indicates the max per pipe bandwidth in Kbps. +- qcom,sde-amortizable-threshold: This value indicates the min for traffic shaping in lines. +- qcom,sde-vbif-qos-rt-remap: This array is used to program vbif qos remapper register + priority for realtime clients. +- qcom,sde-vbif-qos-nrt-remap: This array is used to program vbif qos remapper register + priority for non-realtime clients. +- qcom,sde-vbif-qos-cwb-remap: This array is used to program vbif qos remapper register + priority for concurrent writeback clients. +- qcom,sde-vbif-qos-lutdma-remap: This array is used to program vbif qos remapper register + priority for lutdma client. +- qcom,sde-danger-lut: Array of 5 cell property, with a format of + <linear, tile, nrt, cwb, tile-qseed>, + indicating the danger luts on sspp. +- qcom,sde-safe-lut-linear: Array of 2 cell property, with a format of + <fill level, lut> in ascending fill level + indicating the safe luts for linear format on sspp. + Zero fill level on the last entry identifies the default lut. +- qcom,sde-safe-lut-macrotile: Array of 2 cell property, with a format of + <fill level, lut> in ascending fill level + indicating the safe luts for macrotile format on sspp. + Zero fill level on the last entry identifies the default lut. +- qcom,sde-safe-lut-macrotile-qseed: Array of 2 cell property, with a format of + <fill level, lut> in ascending fill level + indicating the safe luts for macrotile format + with qseed3 on sspp. + Zero fill level on the last entry identifies the default lut. +- qcom,sde-safe-lut-nrt: Array of 2 cell property, with a format of + <fill level, lut> in ascending fill level + indicating the safe luts for nrt (e.g wfd) on sspp. + Zero fill level on the last entry identifies the default lut. +- qcom,sde-safe-lut-cwb: Array of 2 cell property, with a format of + <fill level, lut> in ascending fill level + indicating the safe luts for cwb on sspp. + Zero fill level on the last entry identifies the default lut. +- qcom,sde-qos-lut-linear: Array of 3 cell property, with a format of + <fill level, lut hi, lut lo> in ascending fill level + indicating the qos luts for linear format on sspp. + Zero fill level on the last entry identifies the default lut. +- qcom,sde-qos-lut-macrotile: Array of 3 cell property, with a format of + <fill level, lut hi, lut lo> in ascending fill level + indicating the qos luts for macrotile format on sspp. + Zero fill level on the last entry identifies the default lut. +- qcom,sde-qos-lut-macrotile-qseed: Array of 3 cell property, with a format of + <fill level, lut hi, lut lo> in ascending fill level + indicating the qos luts for macrotile format + with qseed3 enabled on sspp. + Zero fill level on the last entry identifies the default lut. +- qcom,sde-qos-lut-nrt: Array of 3 cell property, with a format of + <fill level, lut hi, lut lo> in ascending fill level + indicating the qos luts for nrt (e.g wfd) on sspp. + Zero fill level on the last entry identifies the default lut. +- qcom,sde-qos-lut-cwb: Array of 3 cell property, with a format of + <fill level, lut hi, lut lo> in ascending fill level + indicating the qos luts for cwb on sspp. + Zero fill level on the last entry identifies the default lut. +- qcom,sde-cdp-setting: Array of 2 cell property, with a format of + <read enable, write enable> for cdp use cases in + order of <real_time>, and <non_real_time>. +- qcom,sde-qos-cpu-mask: A u32 value indicating desired PM QoS CPU affine mask. +- qcom,sde-qos-cpu-dma-latency: A u32 value indicating desired PM QoS CPU DMA latency in usec. +- qcom,sde-inline-rot-xin: An integer array of xin-ids related to inline + rotation. +- qcom,sde-inline-rot-xin-type: A string array indicating the type of xin, + namely sspp or wb. Number of entries should match + the number of xin-ids defined in + property: qcom,sde-inline-rot-xin +- qcom,sde-inline-rot-clk-ctrl: Array of offsets describing clk control + offsets for dynamic clock gating. 1st value + in the array represents offset of the control + register. 2nd value represents bit offset within + control register. Number of offsets defined should + match the number of xin-ids defined in + property: qcom,sde-inline-rot-xin +- qcom,sde-secure-sid-mask: Array of secure SID masks used during + secure-camera/secure-display usecases. +- #power-domain-cells: Number of cells in a power-domain specifier and should contain 0. +- #list-cells: Number of mdp cells, must be 1. +- qcom,sde-mixer-display-pref: A string array indicating the preferred display type + for the mixer block. Possible values: + "primary" - preferred for primary display + "none" - no preference on display +- qcom,sde-mixer-cwb-pref: A string array indicating the preferred mixer block. + for CWB. Possible values: + "cwb" - preferred for cwb + "none" - no preference on display +- qcom,sde-ctl-display-pref: A string array indicating the preferred display type + for the ctl block. Possible values: + "primary" - preferred for primary display + "none" - no preference on display +- qcom,sde-pipe-order-version: A u32 property to indicate version of pipe + ordering block + 0: lower priority pipe has to be on the left for a given pair of pipes. + 1: priority have to be explicitly configured for a given pair of pipes. + +Bus Scaling Subnodes: +- qcom,sde-reg-bus: Property to provide Bus scaling for register access for + mdss blocks. +- qcom,sde-data-bus: Property to provide Bus scaling for data bus access for + mdss blocks. +- qcom,sde-llcc-bus: Property to provide Bus scaling for data bus access for + mnoc to llcc. +- qcom,sde-ebi-bus: Property to provide Bus scaling for data bus access for + llcc to ebi. + +- qcom,sde-inline-rotator: A 2 cell property, with format of (rotator phandle, + instance id), of inline rotator device. + +Bus Scaling Data: +- qcom,msm-bus,name: String property describing client name. +- qcom,msm-bus,num-cases: This is the number of Bus Scaling use cases + defined in the vectors property. +- qcom,msm-bus,num-paths: This represents the number of paths in each + Bus Scaling Usecase. +- qcom,msm-bus,vectors-KBps: * A series of 4 cell properties, with a format + of (src, dst, ab, ib) which is defined at + Documentation/devicetree/bindings/arm/msm/msm_bus.txt + * Current values of src & dst are defined at + include/linux/msm-bus-board.h + +SMMU Subnodes: +- smmu_sde_****: Child nodes representing sde smmu virtual + devices + +Subnode properties: +- compatible: Compatible names used for smmu devices. + names should be: + "qcom,smmu_sde_unsec": smmu context bank device + for unsecure sde real time domain. + "qcom,smmu_sde_sec": smmu context bank device + for secure sde real time domain. + "qcom,smmu_sde_nrt_unsec": smmu context bank device + for unsecure sde non-real time domain. + "qcom,smmu_sde_nrt_sec": smmu context bank device + for secure sde non-real time domain. + + +Please refer to ../../interrupt-controller/interrupts.txt for a general +description of interrupt bindings. + +Example: + mdss_mdp: qcom,mdss_mdp@900000 { + compatible = "qcom,sde-kms"; + reg = <0x00900000 0x90000>, + <0x009b0000 0x1040>, + <0x009b8000 0x1040>, + <0x0aeac000 0x00f0>; + reg-names = "mdp_phys", + "vbif_phys", + "vbif_nrt_phys", + "regdma_phys"; + clocks = <&clock_mmss clk_mdss_ahb_clk>, + <&clock_mmss clk_mdss_axi_clk>, + <&clock_mmss clk_mdp_clk_src>, + <&clock_mmss clk_mdss_mdp_vote_clk>, + <&clock_mmss clk_smmu_mdp_axi_clk>, + <&clock_mmss clk_mmagic_mdss_axi_clk>, + <&clock_mmss clk_mdss_vsync_clk>; + clock-names = "iface_clk", + "bus_clk", + "core_clk_src", + "core_clk", + "iommu_clk", + "mmagic_clk", + "vsync_clk"; + clock-rate = <0>, <0>, <0>; + clock-max-rate= <0 320000000 0>; + mmagic-supply = <&gdsc_mmagic_mdss>; + vdd-supply = <&gdsc_mdss>; + interrupt-parent = <&intc>; + interrupts = <0 83 0>; + interrupt-controller; + #interrupt-cells = <1>; + iommus = <&mdp_smmu 0>; + #power-domain-cells = <0>; + + qcom,sde-off = <0x1000>; + qcom,sde-ctl-off = <0x00002000 0x00002200 0x00002400 + 0x00002600 0x00002800>; + qcom,sde-ctl-display-pref = "primary", "none", "none", + "none", "none"; + qcom,sde-mixer-off = <0x00045000 0x00046000 + 0x00047000 0x0004a000>; + qcom,sde-mixer-display-pref = "primary", "none", + "none", "none"; + qcom,sde-mixer-cwb-pref = "none", "none", + "cwb", "none"; + qcom,sde-dspp-top-off = <0x1300>; + qcom,sde-dspp-off = <0x00055000 0x00057000>; + qcom,sde-dspp-ad-off = <0x24000 0x22800>; + qcom,sde-dspp-ad-version = <0x00030000>; + qcom,sde-dest-scaler-top-off = <0x00061000>; + qcom,sde-dest-scaler-off = <0x800 0x1000>; + qcom,sde-wb-off = <0x00066000>; + qcom,sde-wb-xin-id = <6>; + qcom,sde-intf-off = <0x0006b000 0x0006b800 + 0x0006c000 0x0006c800>; + qcom,sde-intf-type = "none", "dsi", "dsi", "hdmi"; + qcom,sde-pp-off = <0x00071000 0x00071800 + 0x00072000 0x00072800>; + qcom,sde-pp-slave = <0x0 0x0 0x0 0x0>; + qcom,sde-cdm-off = <0x0007a200>; + qcom,sde-dsc-off = <0x00081000 0x00081400>; + qcom,sde-intf-max-prefetch-lines = <0x15 0x15 0x15 0x15>; + + qcom,sde-mixer-pair-mask = <2 1 6 0 0 3>; + qcom,sde-mixer-blend-op-off = <0x20 0x38 0x50 0x68 0x80 0x98 + 0xb0 0xc8 0xe0 0xf8 0x110>; + + qcom,sde-qdss-off = <0x81a00>; + + qcom,sde-sspp-type = "vig", "vig", "vig", + "vig", "rgb", "rgb", + "rgb", "rgb", "dma", + "dma", "cursor", "cursor"; + + qcom,sde-sspp-off = <0x00005000 0x00007000 0x00009000 + 0x0000b000 0x00015000 0x00017000 + 0x00019000 0x0001b000 0x00025000 + 0x00027000 0x00035000 0x00037000>; + + qcom,sde-sspp-xin-id = <0 4 8 + 12 1 5 + 9 13 2 + 10 7 7>; + + /* offsets are relative to "mdp_phys + qcom,sde-off */ + qcom,sde-sspp-clk-ctrl = <0x2ac 0>, <0x2b4 0>, <0x2bc 0>, + <0x2c4 0>, <0x2ac 4>, <0x2b4 4>, <0x2bc 4>, + <0x2c4 4>, <0x2ac 8>, <0x2b4 8>, <0x3a8 16>, + <0x3b0 16>; + qcom,sde-sspp-clk-status = <0x2ac 0>, <0x2b4 0>, <0x2bc 0>, + <0x2c4 0>, <0x2ac 4>, <0x2b4 4>, <0x2bc 4>, + <0x2c4 4>, <0x2ac 8>, <0x2b4 8>, <0x3a8 16>, + <0x3b0 16>; + qcom,sde-mixer-linewidth = <2560>; + qcom,sde-sspp-linewidth = <2560>; + qcom,sde-mixer-blendstages = <0x7>; + qcom,sde-highest-bank-bit = <0x2>; + qcom,sde-ubwc-version = <0x100>; + qcom,sde-ubwc-static = <0x100>; + qcom,sde-ubwc-swizzle = <0>; + qcom,sde-ubwc-bw-calc-version = <0x1>; + qcom,sde-smart-panel-align-mode = <0xd>; + qcom,sde-panic-per-pipe; + qcom,sde-has-src-split; + qcom,sde-pipe-order-version = <0x1>; + qcom,sde-has-dim-layer; + qcom,sde-sspp-src-size = <0x100>; + qcom,sde-mixer-size = <0x100>; + qcom,sde-ctl-size = <0x100>; + qcom,sde-dspp-top-size = <0xc>; + qcom,sde-dspp-size = <0x100>; + qcom,sde-intf-size = <0x100>; + qcom,sde-dsc-size = <0x100>; + qcom,sde-cdm-size = <0x100>; + qcom,sde-pp-size = <0x100>; + qcom,sde-wb-size = <0x100>; + qcom,sde-dest-scaler-top-size = <0xc>; + qcom,sde-dest-scaler-size = <0x800>; + qcom,sde-len = <0x100>; + qcom,sde-wb-linewidth = <2560>; + qcom,sde-sspp-scale-size = <0x100>; + qcom,sde-mixer-blendstages = <0x8>; + qcom,sde-qseed-type = "qseedv2"; + qcom,sde-csc-type = "csc-10bit"; + qcom,sde-highest-bank-bit = <15>; + qcom,sde-has-mixer-gc; + qcom,sde-has-idle-pc; + qcom,fullsize-va-map; + qcom,sde-has-dest-scaler; + qcom,sde-max-dest-scaler-input-linewidth = <2048>; + qcom,sde-max-dest-scaler-output-linewidth = <2560>; + qcom,sde-sspp-max-rects = <1 1 1 1 + 1 1 1 1 + 1 1 + 1 1>; + qcom,sde-sspp-excl-rect = <1 1 1 1 + 1 1 1 1 + 1 1 + 1 1>; + qcom,sde-sspp-smart-dma-priority = <0 0 0 0 + 0 0 0 0 + 0 0 + 1 2>; + qcom,sde-smart-dma-rev = "smart_dma_v2"; + qcom,sde-te-off = <0x100>; + qcom,sde-te2-off = <0x100>; + qcom,sde-te-size = <0xffff>; + qcom,sde-te2-size = <0xffff>; + + qcom,sde-wb-id = <2>; + qcom,sde-wb-clk-ctrl = <0x2bc 16>; + + qcom,sde-danger-lut = <0x0000000f 0x0000ffff 0x00000000 + 0x00000000 0x0000ffff>; + qcom,sde-safe-lut-linear = <0 0xfff8>; + qcom,sde-safe-lut-macrotile = <0 0xf000>; + qcom,sde-safe-lut-macrotile-qseed = <0 0xf000>; + qcom,sde-safe-lut-nrt = <0 0xffff>; + qcom,sde-safe-lut-cwb = <0 0xffff>; + + qcom,sde-qos-lut-linear = + <4 0x00000000 0x00000357>, + <5 0x00000000 0x00003357>, + <6 0x00000000 0x00023357>, + <7 0x00000000 0x00223357>, + <8 0x00000000 0x02223357>, + <9 0x00000000 0x22223357>, + <10 0x00000002 0x22223357>, + <11 0x00000022 0x22223357>, + <12 0x00000222 0x22223357>, + <13 0x00002222 0x22223357>, + <14 0x00012222 0x22223357>, + <0 0x00112222 0x22223357>; + qcom,sde-qos-lut-macrotile = + <10 0x00000003 0x44556677>, + <11 0x00000033 0x44556677>, + <12 0x00000233 0x44556677>, + <13 0x00002233 0x44556677>, + <14 0x00012233 0x44556677>, + <0 0x00112233 0x44556677>; + qcom,sde-qos-lut-macrotile-qseed = + <0 0x00112233 0x66777777>; + qcom,sde-qos-lut-nrt = + <0 0x00000000 0x00000000>; + qcom,sde-qos-lut-cwb = + <0 0x75300000 0x00000000>; + + qcom,sde-cdp-setting = <1 1>, <1 0>; + + qcom,sde-qos-cpu-mask = <0x3>; + qcom,sde-qos-cpu-dma-latency = <300>; + + qcom,sde-vbif-off = <0 0>; + qcom,sde-vbif-id = <0 1>; + qcom,sde-vbif-default-ot-rd-limit = <32>; + qcom,sde-vbif-default-ot-wr-limit = <16>; + qcom,sde-vbif-dynamic-ot-rd-limit = <62208000 2>, + <124416000 4>, <248832000 16>; + qcom,sde-vbif-dynamic-ot-wr-limit = <62208000 2>, + <124416000 4>, <248832000 16>; + qcom,sde-vbif-memtype-0 = <3 3 3 3 3 3 3 3>; + qcom,sde-vbif-memtype-1 = <3 3 3 3 3 3>; + + qcom,sde-uidle-off = <0x80000>; + qcom,sde-uidle-size = <0x70>; + + qcom,sde-dram-channels = <2>; + qcom,sde-num-nrt-paths = <1>; + + qcom,sde-max-bw-high-kbps = <9000000>; + qcom,sde-max-bw-low-kbps = <9000000>; + + qcom,sde-core-ib-ff = "1.1"; + qcom,sde-core-clk-ff = "1.0"; + qcom,sde-min-core-ib-kbps = <2400000>; + qcom,sde-min-llcc-ib-kbps = <800000>; + qcom,sde-min-dram-ib-kbps = <800000>; + qcom,sde-comp-ratio-rt = "NV12/5/1/1.1 AB24/5/1/1.2 XB24/5/1/1.3"; + qcom,sde-comp-ratio-nrt = "NV12/5/1/1.1 AB24/5/1/1.2 XB24/5/1/1.3"; + qcom,sde-undersized-prefill-lines = <4>; + qcom,sde-xtra-prefill-lines = <5>; + qcom,sde-dest-scale-prefill-lines = <6>; + qcom,sde-macrotile-prefill-lines = <7>; + qcom,sde-yuv-nv12-prefill-lines = <8>; + qcom,sde-linear-prefill-lines = <9>; + qcom,sde-downscaling-prefill-lines = <10>; + qcom,sde-max-per-pipe-bw-kbps = <2400000 2400000 2400000 2400000 + 2400000 2400000 2400000 2400000>; + qcom,sde-amortizable-threshold = <11>; + qcom,sde-secure-sid-mask = <0x200801 0x200c01>; + + qcom,sde-vbif-qos-rt-remap = <3 3 4 4 5 5 6 6>; + qcom,sde-vbif-qos-nrt-remap = <3 3 3 3 3 3 3 3>; + qcom,sde-vbif-qos-cwb-remap = <3 3 4 4 5 5 6 3>; + qcom,sde-vbif-qos-lutdma-remap = <3 3 3 3 4 4 4 4>; + + qcom,sde-reg-dma-off = <0>; + qcom,sde-reg-dma-version = <0x00010002>; + qcom,sde-reg-dma-trigger-off = <0x119c>; + qcom,sde-reg-dma-broadcast-disabled = <0>; + qcom,sde-reg-dma-xin-id = <7>; + qcom,sde-reg-dma-clk-ctrl = <0x2bc 20>; + + qcom,sde-sspp-vig-blocks { + qcom,sde-vig-csc-off = <0x320>; + qcom,sde-vig-qseed-off = <0x200>; + qcom,sde-vig-qseed-size = <0x74>; + /* Offset from vig top, version of HSIC */ + qcom,sde-vig-hsic = <0x200 0x00010000>; + qcom,sde-vig-memcolor = <0x200 0x00010000>; + qcom,sde-vig-pcc = <0x1780 0x00010000>; + qcom,sde-vig-inverse-pma; + }; + + qcom,sde-sspp-dma-blocks { + dgm@0 { + qcom,sde-dma-igc = <0x400 0x00050000>; + qcom,sde-dma-gc = <0x600 0x00050000>; + qcom,sde-dma-inverse-pma; + qcom,sde-dma-csc-off = <0x200>; + } + dgm@1 { + qcom,sde-dma-igc = <0x1400 0x00050000>; + qcom,sde-dma-gc = <0x600 0x00050000>; + qcom,sde-dma-inverse-pma; + qcom,sde-dma-csc-off = <0x1200>; + } + }; + + qcom,sde-sspp-rgb-blocks { + qcom,sde-rgb-scaler-off = <0x200>; + qcom,sde-rgb-scaler-size = <0x74>; + qcom,sde-rgb-pcc = <0x380 0x00010000>; + }; + + qcom,sde-dspp-blocks { + qcom,sde-dspp-igc = <0x0 0x00010000>; + qcom,sde-dspp-pcc = <0x1700 0x00010000>; + qcom,sde-dspp-gc = <0x17c0 0x00010000>; + qcom,sde-dspp-hsic = <0x0 0x00010000>; + qcom,sde-dspp-memcolor = <0x0 0x00010000>; + qcom,sde-dspp-sixzone = <0x0 0x00010000>; + qcom,sde-dspp-gamut = <0x1600 0x00010000>; + qcom,sde-dspp-dither = <0x0 0x00010000>; + qcom,sde-dspp-hist = <0x0 0x00010000>; + qcom,sde-dspp-vlut = <0x0 0x00010000>; + }; + + qcom,sde-mixer-blocks { + qcom,sde-mixer-gc = <0x3c0 0x00010000>; + }; + + qcom,msm-hdmi-audio-rx { + compatible = "qcom,msm-hdmi-audio-codec-rx"; + }; + + qcom,sde-inline-rotator = <&mdss_rotator 0>; + qcom,sde-inline-rot-xin = <10 11>; + qcom,sde-inline-rot-xin-type = "sspp", "wb"; + qcom,sde-inline-rot-clk-ctrl = <0x2bc 0x8>, <0x2bc 0xc>; + + qcom,platform-supply-entries { + #address-cells = <1>; + #size-cells = <0>; + qcom,platform-supply-entry@0 { + reg = <0>; + qcom,supply-name = "vdd"; + qcom,supply-min-voltage = <0>; + qcom,supply-max-voltage = <0>; + qcom,supply-enable-load = <0>; + qcom,supply-disable-load = <0>; + qcom,supply-pre-on-sleep = <0>; + qcom,supply-post-on-sleep = <0>; + qcom,supply-pre-off-sleep = <0>; + qcom,supply-post-off-sleep = <0>; + }; + }; + + qcom,sde-data-bus { + qcom,msm-bus,name = "mdss_sde"; + qcom,msm-bus,num-cases = <3>; + qcom,msm-bus,num-paths = <3>; + qcom,msm-bus,vectors-KBps = + <22 512 0 0>, <23 512 0 0>, <25 512 0 0>, + <22 512 0 6400000>, <23 512 0 6400000>, + <25 512 0 6400000>, + <22 512 0 6400000>, <23 512 0 6400000>, + <25 512 0 6400000>; + }; + qcom,sde-llcc-bus { + qcom,msm-bus,name = "mdss_sde_llcc"; + qcom,msm-bus,num-cases = <3>; + qcom,msm-bus,num-paths = <1>; + qcom,msm-bus,vectors-KBps = + <132 770 0 0>, + <132 770 0 6400000>, + <132 770 0 6400000>; + }; + qcom,sde-ebi-bus { + qcom,msm-bus,name = "mdss_sde_ebi"; + qcom,msm-bus,num-cases = <3>; + qcom,msm-bus,num-paths = <1>; + qcom,msm-bus,vectors-KBps = + <129 512 0 0>, + <129 512 0 6400000>, + <129 512 0 6400000>; + }; + + qcom,sde-reg-bus { + /* Reg Bus Scale Settings */ + qcom,msm-bus,name = "mdss_reg"; + qcom,msm-bus,num-cases = <4>; + qcom,msm-bus,num-paths = <1>; + qcom,msm-bus,active-only; + qcom,msm-bus,vectors-KBps = + <1 590 0 0>, + <1 590 0 76800>, + <1 590 0 160000>, + <1 590 0 320000>; + }; + + smmu_kms_unsec: qcom,smmu_kms_unsec_cb { + compatible = "qcom,smmu_sde_unsec"; + iommus = <&mmss_smmu 0>; + }; + + smmu_kms_sec: qcom,smmu_kms_sec_cb { + compatible = "qcom,smmu_sde_sec"; + iommus = <&mmss_smmu 1>; + }; + }; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-ext-bridge-1080p.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-ext-bridge-1080p.dtsi new file mode 100644 index 000000000000..07d398e9e16c --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-ext-bridge-1080p.dtsi @@ -0,0 +1,46 @@ +&mdss_mdp { + dsi_ext_bridge_1080p: qcom,mdss_dsi_ext_bridge_1080p { + qcom,mdss-dsi-panel-name = "ext video mode dsi bridge"; + qcom,mdss-dsi-panel-type = "dsi_video_mode"; + + qcom,dsi-ctrl-num = <0>; + qcom,dsi-phy-num = <0>; + qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0"; + + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-bpp = <24>; + qcom,mdss-dsi-border-color = <0>; + qcom,mdss-dsi-traffic-mode = "non_burst_sync_pulse"; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + qcom,mdss-dsi-t-clk-post = <0x03>; + qcom,mdss-dsi-t-clk-pre = <0x24>; + qcom,mdss-dsi-force-clock-lane-hs; + qcom,mdss-dsi-ext-bridge-mode; + + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-width = <1920>; + qcom,mdss-dsi-panel-height = <1080>; + qcom,mdss-dsi-h-front-porch = <88>; + qcom,mdss-dsi-h-back-porch = <148>; + qcom,mdss-dsi-h-pulse-width = <44>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <36>; + qcom,mdss-dsi-v-front-porch = <4>; + qcom,mdss-dsi-v-pulse-width = <5>; + qcom,mdss-dsi-h-sync-pulse = <0>; + qcom,mdss-dsi-panel-framerate = <60>; + qcom,display-topology = <1 0 1>; + qcom,default-topology-index = <0>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-hx83112a-truly-singlemipi-fhd-video.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-hx83112a-truly-singlemipi-fhd-video.dtsi new file mode 100644 index 000000000000..9dc1a26207f3 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-hx83112a-truly-singlemipi-fhd-video.dtsi @@ -0,0 +1,151 @@ +&mdss_mdp { + dsi_hx83112a_truly_video: qcom,mdss_dsi_hx83112a_truly_video { + qcom,mdss-dsi-panel-name = + "hx83112a video mode dsi truly panel"; + qcom,mdss-dsi-panel-type = "dsi_video_mode"; + + qcom,dsi-ctrl-num = <0>; + qcom,dsi-phy-num = <0>; + qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0"; + + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-bpp = <24>; + qcom,mdss-dsi-color-order = "rgb_swap_rgb"; + qcom,mdss-dsi-underflow-color = <0xff>; + qcom,mdss-dsi-border-color = <0>; + qcom,mdss-dsi-h-sync-pulse = <0>; + qcom,mdss-dsi-traffic-mode = "non_burst_sync_event"; + qcom,mdss-dsi-lane-map = "lane_map_0123"; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,mdss-dsi-tx-eot-append; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + qcom,mdss-dsi-lp11-init; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; + qcom,mdss-dsi-bl-min-level = <1>; + qcom,mdss-dsi-bl-max-level = <4095>; + qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>; + qcom,mdss-pan-physical-width-dimension = <65>; + qcom,mdss-pan-physical-height-dimension = <129>; + + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-width = <1080>; + qcom,mdss-dsi-panel-height = <2160>; + qcom,mdss-dsi-h-front-porch = <42>; + qcom,mdss-dsi-h-back-porch = <42>; + qcom,mdss-dsi-h-pulse-width = <10>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <15>; + qcom,mdss-dsi-v-front-porch = <10>; + qcom,mdss-dsi-v-pulse-width = <3>; + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-on-command = [ + 39 01 00 00 00 00 04 B9 83 11 2A + 39 01 00 00 00 00 09 B1 08 29 29 00 00 4F 54 + 33 + 39 01 00 00 00 00 11 B2 00 02 00 80 70 00 08 + 26 FC 01 00 03 15 A3 87 09 + 39 01 00 00 00 00 02 BD 02 + 39 01 00 00 00 00 02 BD 00 + 39 01 00 00 00 00 03 D2 2C 2C + 39 01 00 00 00 00 1C B4 01 CE 01 CE 01 CE 0A + CE 0A CE 0A CE 00 FF 00 FF 00 00 22 23 00 + 28 0A 13 14 00 8A + 39 01 00 00 00 00 02 BD 02 + 39 01 00 00 00 00 0A B4 00 92 12 22 88 12 12 + 00 53 + 39 01 00 00 00 00 02 BD 00 + 39 01 00 00 00 00 04 B6 82 82 E3 + 39 01 00 00 00 00 02 CC 08 + 39 01 00 00 00 00 2B D3 40 00 00 00 00 01 01 + 0A 0A 07 07 00 08 09 09 09 09 32 10 09 00 + 09 32 21 0A 00 0A 32 10 08 00 00 00 00 00 + 00 00 00 00 0B 08 82 + 39 01 00 00 00 00 02 BD 01 + 39 01 00 00 00 00 09 D3 00 00 19 00 00 0A 00 + 81 + 39 01 00 00 00 00 02 BD 00 + 39 01 00 00 00 00 31 D5 18 18 18 18 18 18 18 + 18 31 31 30 30 2F 2F 31 31 30 30 2F 2F C0 + 18 40 40 01 00 07 06 05 04 03 02 21 20 18 + 18 19 19 18 18 03 03 18 18 18 18 18 18 + 39 01 00 00 00 00 31 D6 18 18 18 18 18 18 18 + 18 31 31 30 30 2F 2F 31 31 30 30 2F 2F C0 + 18 40 40 02 03 04 05 06 07 00 01 20 21 18 + 18 18 18 19 19 20 20 18 18 18 18 18 18 + 39 01 00 00 00 00 19 D8 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 00 + 39 01 00 00 00 00 02 BD 01 + 39 01 00 00 00 00 19 D8 AA AA AA AA AA AA AA + AA AA AA AA AA AA AA AA AA AA AA AA AA AA + AA AA AA + 39 01 00 00 00 00 02 BD 02 + 39 01 00 00 00 00 0D D8 AF FF FA AA BA AA AA + FF FA AA BA AA + 39 01 00 00 00 00 02 BD 03 + 39 01 00 00 00 00 19 D8 AA AA AA AA AA AA AA + AA AA AA AA AA AA AA AA AA AA AA AA AA AA + AA AA AA + 39 01 00 00 00 00 02 BD 00 + 39 01 00 00 00 00 18 E7 0E 0E 1E 6A 1D 6A 00 + 32 02 02 00 00 02 02 02 05 14 14 32 B9 23 + B9 08 + 39 01 00 00 00 00 02 BD 01 + 39 01 00 00 00 00 0A E7 02 00 98 01 9A 0D A8 + 0E 01 + 39 01 00 00 00 00 02 BD 02 + 39 01 00 00 00 00 1E E7 00 00 08 00 01 00 00 + 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + 00 04 00 00 00 00 02 00 + 39 01 00 00 00 00 02 BD 00 + 39 01 00 00 00 00 02 C1 01 + 39 01 00 00 00 00 02 BD 01 + 39 01 00 00 00 00 3A C1 FF F7 F0 E9 E2 DB D4 + C6 BF B8 B1 AB A5 9F 99 94 8E 8A 85 7C 74 + 6C 65 5F 58 52 4B 47 42 3C 37 31 2C 27 22 + 1C 18 12 0D 08 05 04 02 01 00 27 B9 BE 54 + C6 B8 9C 37 43 3D E5 00 + 39 01 00 00 00 00 02 BD 02 + 39 01 00 00 00 00 3A C1 FF F7 F0 E9 E2 DB D4 + C6 BF B8 B1 AB A5 9F 99 94 8E 8A 85 7C 74 + 6C 65 5F 58 52 4B 47 42 3C 37 31 2C 27 22 + 1C 18 12 0D 08 05 04 02 01 00 27 B9 BE 54 + C6 B8 9C 37 43 3D E5 00 + 39 01 00 00 00 00 02 BD 03 + 39 01 00 00 00 00 3A C1 FF F7 F0 E9 E2 DB D4 + C6 BF B8 B1 AB A5 9F 99 94 8E 8A 85 7C 74 + 6C 65 5F 58 52 4B 47 42 3C 37 31 2C 27 22 + 1C 18 12 0D 08 05 04 02 01 00 27 B9 BE 54 + C6 B8 9C 37 43 3D E5 00 + 39 01 00 00 00 00 02 BD 00 + 39 01 00 00 00 00 02 E9 C3 + 39 01 00 00 00 00 03 CB 92 01 + 39 01 00 00 00 00 02 E9 3F + 39 01 00 00 00 00 07 C7 70 00 04 E0 33 00 + 39 01 00 00 00 00 03 51 0F FF + 39 01 00 00 00 00 02 53 24 + 39 01 00 00 00 00 02 55 00 + 15 01 00 00 00 00 02 35 00 + 05 01 00 00 96 00 02 11 00 + 05 01 00 00 32 00 02 29 00]; + qcom,mdss-dsi-off-command = [ + 05 01 00 00 32 00 02 28 00 + 05 01 00 00 96 00 02 10 00]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-hx8394d-720p-video.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-hx8394d-720p-video.dtsi new file mode 100644 index 000000000000..6de6c6c4c859 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-hx8394d-720p-video.dtsi @@ -0,0 +1,87 @@ +&mdss_mdp { + dsi_hx8394d_720_vid: qcom,mdss_dsi_hx8394d_720p_video { + qcom,mdss-dsi-panel-name = "hx8394d 720p video mode dsi panel"; + qcom,mdss-dsi-panel-type = "dsi_video_mode"; + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-panel-width = <720>; + qcom,mdss-dsi-panel-height = <1280>; + qcom,mdss-dsi-h-front-porch = <52>; + qcom,mdss-dsi-h-back-porch = <100>; + qcom,mdss-dsi-h-pulse-width = <24>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <20>; + qcom,mdss-dsi-v-front-porch = <8>; + qcom,mdss-dsi-v-pulse-width = <4>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-bpp = <24>; + qcom,mdss-dsi-underflow-color = <0xff>; + qcom,mdss-dsi-border-color = <0>; + qcom,mdss-dsi-on-command = [ + 39 01 00 00 00 00 04 b9 ff 83 94 + 39 01 00 00 00 00 03 ba 33 83 + 39 01 00 00 00 00 10 b1 6c 12 12 + 37 04 11 f1 80 ec 94 23 80 c0 + d2 18 + 39 01 00 00 00 00 0c b2 00 64 0e + 0d 32 23 08 08 1c 4d 00 + 39 01 00 00 00 00 0d b4 00 ff 03 + 50 03 50 03 50 01 6a 01 6a + 39 01 00 00 00 00 02 bc 07 + 39 01 00 00 00 00 04 bf 41 0e 01 + 39 01 00 00 00 00 1f d3 00 07 00 + 00 00 10 00 32 10 05 00 00 32 + 10 00 00 00 32 10 00 00 00 36 + 03 09 09 37 00 00 37 + 39 01 00 00 00 00 2d d5 02 03 00 + 01 06 07 04 05 20 21 22 23 18 + 18 18 18 18 18 18 18 18 18 18 + 18 18 18 18 18 18 18 18 18 18 + 18 18 18 18 18 24 25 18 18 19 + 19 + 39 01 00 00 00 00 2d d6 05 04 07 + 06 01 00 03 02 23 22 21 20 18 + 18 18 18 18 18 58 58 18 18 18 + 18 18 18 18 18 18 18 18 18 18 + 18 18 18 18 18 25 24 19 19 18 + 18 + 39 01 00 00 00 00 02 cc 09 + 39 01 00 00 00 00 03 c0 30 14 + 39 01 00 00 00 00 05 c7 00 c0 40 c0 + 39 01 00 00 00 00 03 b6 43 43 + 05 01 00 00 c8 00 02 11 00 + 05 01 00 00 0a 00 02 29 00 + ]; + qcom,mdss-dsi-off-command = [05 01 00 00 00 00 02 28 00 + 05 01 00 00 00 00 02 10 00]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + qcom,mdss-dsi-h-sync-pulse = <1>; + qcom,mdss-dsi-traffic-mode = "burst_mode"; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-panel-timings = [ + 79 1a 12 00 3e 42 + 16 1e 15 03 04 00 + ]; + qcom,mdss-dsi-t-clk-post = <0x04>; + qcom,mdss-dsi-t-clk-pre = <0x1b>; + qcom,mdss-dsi-bl-min-level = <1>; + qcom,mdss-dsi-bl-max-level = <4095>; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; + qcom,mdss-dsi-reset-sequence = <1 20>, <0 1>, <1 20>; + qcom,mdss-pan-physical-width-dimension = <59>; + qcom,mdss-pan-physical-height-dimension = <104>; + + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-nt35597-truly-dsc-wqxga-cmd.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-nt35597-truly-dsc-wqxga-cmd.dtsi new file mode 100644 index 000000000000..8a05258d0e43 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-nt35597-truly-dsc-wqxga-cmd.dtsi @@ -0,0 +1,240 @@ +&mdss_mdp { + dsi_nt35597_truly_dsc_cmd: qcom,mdss_dsi_nt35597_dsc_cmd_truly { + qcom,mdss-dsi-panel-name = + "nt35597 cmd mode dsi truly panel with DSC"; + qcom,mdss-dsi-panel-type = "dsi_cmd_mode"; + + qcom,dsi-ctrl-num = <1>; + qcom,dsi-phy-num = <1>; + qcom,dsi-select-clocks = "src_byte_clk1", "src_pixel_clk1"; + + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-pan-physical-width-dimension = <74>; + qcom,mdss-pan-physical-height-dimension = <131>; + qcom,mdss-dsi-bpp = <24>; + qcom,mdss-dsi-color-order = "rgb_swap_rgb"; + qcom,mdss-dsi-underflow-color = <0xff>; + qcom,mdss-dsi-border-color = <0>; + qcom,mdss-dsi-panel-hdr-enabled; + qcom,mdss-dsi-panel-hdr-color-primaries = <14500 15500 32000 + 17000 15500 30000 8000 3000>; + qcom,mdss-dsi-panel-peak-brightness = <4200000>; + qcom,mdss-dsi-panel-blackness-level = <3230>; + qcom,mdss-dsi-traffic-mode = "non_burst_sync_event"; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>; + qcom,mdss-dsi-bl-max-level = <4095>; + qcom,adjust-timer-wakeup-ms = <1>; + qcom,mdss-dsi-te-pin-select = <1>; + qcom,mdss-dsi-wr-mem-start = <0x2c>; + qcom,mdss-dsi-wr-mem-continue = <0x3c>; + qcom,mdss-dsi-te-dcs-command = <1>; + qcom,mdss-dsi-te-check-enable; + qcom,mdss-dsi-te-using-te-pin; + + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-panel-width = <1440>; + qcom,mdss-dsi-panel-height = <2560>; + qcom,mdss-dsi-h-front-porch = <100>; + qcom,mdss-dsi-h-back-porch = <32>; + qcom,mdss-dsi-h-pulse-width = <16>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <8>; + qcom,mdss-dsi-v-front-porch = <10>; + qcom,mdss-dsi-v-pulse-width = <2>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-panel-jitter = <0x1 0x1>; + qcom,mdss-dsi-on-command = [ + /* CMD2_P0 */ + 15 01 00 00 00 00 02 ff 20 + 15 01 00 00 00 00 02 fb 01 + 15 01 00 00 00 00 02 00 01 + 15 01 00 00 00 00 02 01 55 + 15 01 00 00 00 00 02 02 45 + 15 01 00 00 00 00 02 05 40 + 15 01 00 00 00 00 02 06 19 + 15 01 00 00 00 00 02 07 1e + 15 01 00 00 00 00 02 0b 73 + 15 01 00 00 00 00 02 0c 73 + 15 01 00 00 00 00 02 0e b0 + 15 01 00 00 00 00 02 0f ae + 15 01 00 00 00 00 02 11 b8 + 15 01 00 00 00 00 02 13 00 + 15 01 00 00 00 00 02 58 80 + 15 01 00 00 00 00 02 59 01 + 15 01 00 00 00 00 02 5a 00 + 15 01 00 00 00 00 02 5b 01 + 15 01 00 00 00 00 02 5c 80 + 15 01 00 00 00 00 02 5d 81 + 15 01 00 00 00 00 02 5e 00 + 15 01 00 00 00 00 02 5f 01 + 15 01 00 00 00 00 02 72 31 + 15 01 00 00 00 00 02 68 03 + /* CMD2_P4 */ + 15 01 00 00 00 00 02 ff 24 + 15 01 00 00 00 00 02 fb 01 + 15 01 00 00 00 00 02 00 1c + 15 01 00 00 00 00 02 01 0b + 15 01 00 00 00 00 02 02 0c + 15 01 00 00 00 00 02 03 01 + 15 01 00 00 00 00 02 04 0f + 15 01 00 00 00 00 02 05 10 + 15 01 00 00 00 00 02 06 10 + 15 01 00 00 00 00 02 07 10 + 15 01 00 00 00 00 02 08 89 + 15 01 00 00 00 00 02 09 8a + 15 01 00 00 00 00 02 0a 13 + 15 01 00 00 00 00 02 0b 13 + 15 01 00 00 00 00 02 0c 15 + 15 01 00 00 00 00 02 0d 15 + 15 01 00 00 00 00 02 0e 17 + 15 01 00 00 00 00 02 0f 17 + 15 01 00 00 00 00 02 10 1c + 15 01 00 00 00 00 02 11 0b + 15 01 00 00 00 00 02 12 0c + 15 01 00 00 00 00 02 13 01 + 15 01 00 00 00 00 02 14 0f + 15 01 00 00 00 00 02 15 10 + 15 01 00 00 00 00 02 16 10 + 15 01 00 00 00 00 02 17 10 + 15 01 00 00 00 00 02 18 89 + 15 01 00 00 00 00 02 19 8a + 15 01 00 00 00 00 02 1a 13 + 15 01 00 00 00 00 02 1b 13 + 15 01 00 00 00 00 02 1c 15 + 15 01 00 00 00 00 02 1d 15 + 15 01 00 00 00 00 02 1e 17 + 15 01 00 00 00 00 02 1f 17 + /* STV */ + 15 01 00 00 00 00 02 20 40 + 15 01 00 00 00 00 02 21 01 + 15 01 00 00 00 00 02 22 00 + 15 01 00 00 00 00 02 23 40 + 15 01 00 00 00 00 02 24 40 + 15 01 00 00 00 00 02 25 6d + 15 01 00 00 00 00 02 26 40 + 15 01 00 00 00 00 02 27 40 + /* Vend */ + 15 01 00 00 00 00 02 e0 00 + 15 01 00 00 00 00 02 dc 21 + 15 01 00 00 00 00 02 dd 22 + 15 01 00 00 00 00 02 de 07 + 15 01 00 00 00 00 02 df 07 + 15 01 00 00 00 00 02 e3 6D + 15 01 00 00 00 00 02 e1 07 + 15 01 00 00 00 00 02 e2 07 + /* UD */ + 15 01 00 00 00 00 02 29 d8 + 15 01 00 00 00 00 02 2a 2a + /* CLK */ + 15 01 00 00 00 00 02 4b 03 + 15 01 00 00 00 00 02 4c 11 + 15 01 00 00 00 00 02 4d 10 + 15 01 00 00 00 00 02 4e 01 + 15 01 00 00 00 00 02 4f 01 + 15 01 00 00 00 00 02 50 10 + 15 01 00 00 00 00 02 51 00 + 15 01 00 00 00 00 02 52 80 + 15 01 00 00 00 00 02 53 00 + 15 01 00 00 00 00 02 56 00 + 15 01 00 00 00 00 02 54 07 + 15 01 00 00 00 00 02 58 07 + 15 01 00 00 00 00 02 55 25 + /* Reset XDONB */ + 15 01 00 00 00 00 02 5b 43 + 15 01 00 00 00 00 02 5c 00 + 15 01 00 00 00 00 02 5f 73 + 15 01 00 00 00 00 02 60 73 + 15 01 00 00 00 00 02 63 22 + 15 01 00 00 00 00 02 64 00 + 15 01 00 00 00 00 02 67 08 + 15 01 00 00 00 00 02 68 04 + /* Resolution:1440x2560*/ + 15 01 00 00 00 00 02 72 02 + /* mux */ + 15 01 00 00 00 00 02 7a 80 + 15 01 00 00 00 00 02 7b 91 + 15 01 00 00 00 00 02 7c D8 + 15 01 00 00 00 00 02 7d 60 + 15 01 00 00 00 00 02 7f 15 + 15 01 00 00 00 00 02 75 15 + /* ABOFF */ + 15 01 00 00 00 00 02 b3 C0 + 15 01 00 00 00 00 02 b4 00 + 15 01 00 00 00 00 02 b5 00 + /* Source EQ */ + 15 01 00 00 00 00 02 78 00 + 15 01 00 00 00 00 02 79 00 + 15 01 00 00 00 00 02 80 00 + 15 01 00 00 00 00 02 83 00 + /* FP BP */ + 15 01 00 00 00 00 02 93 0a + 15 01 00 00 00 00 02 94 0a + /* Inversion Type */ + 15 01 00 00 00 00 02 8a 00 + 15 01 00 00 00 00 02 9b ff + /* IMGSWAP =1 @PortSwap=1 */ + 15 01 00 00 00 00 02 9d b0 + 15 01 00 00 00 00 02 9f 63 + 15 01 00 00 00 00 02 98 10 + /* FRM */ + 15 01 00 00 00 00 02 ec 00 + /* CMD1 */ + 15 01 00 00 00 00 02 ff 10 + /* VESA DSC PPS settings + * (1440x2560 slide 16H) + */ + 39 01 00 00 00 00 11 c1 09 + 20 00 10 02 00 02 68 01 bb + 00 0a 06 67 04 c5 + + 39 01 00 00 00 00 03 c2 10 f0 + /* C0h = 0x0(2 Port SDC) + * 0x01(1 PortA FBC) + * 0x02(MTK) 0x03(1 PortA VESA) + */ + 15 01 00 00 00 00 02 c0 03 + /* VBP+VSA=,VFP = 10H */ + 15 01 00 00 00 00 04 3b 03 0a 0a + /* FTE on */ + 15 01 00 00 00 00 02 35 00 + /* EN_BK =1(auto black) */ + 15 01 00 00 00 00 02 e5 01 + /* CMD mode(10) VDO mode(03) */ + 15 01 00 00 00 00 02 bb 10 + /* Non Reload MTP */ + 15 01 00 00 00 00 02 fb 01 + /* SlpOut + DispOn */ + 05 01 00 00 78 00 02 11 00 + 05 01 00 00 78 00 02 29 00 + ]; + qcom,mdss-dsi-off-command = [05 01 00 00 78 00 + 02 28 00 05 01 00 00 78 00 02 10 00]; + + qcom,mdss-dsi-on-command-state = "dsi_hs_mode"; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + qcom,mdss-dsi-h-sync-pulse = <0>; + qcom,compression-mode = "dsc"; + qcom,mdss-dsc-slice-height = <16>; + qcom,mdss-dsc-slice-width = <720>; + qcom,mdss-dsc-slice-per-pkt = <2>; + qcom,mdss-dsc-bit-per-component = <8>; + qcom,mdss-dsc-bit-per-pixel = <8>; + qcom,mdss-dsc-block-prediction-enable; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-nt35597-truly-dsc-wqxga-video.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-nt35597-truly-dsc-wqxga-video.dtsi new file mode 100644 index 000000000000..2d888cbce876 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-nt35597-truly-dsc-wqxga-video.dtsi @@ -0,0 +1,226 @@ +&mdss_mdp { + dsi_nt35597_truly_dsc_video: qcom,mdss_dsi_nt35597_dsc_video_truly { + qcom,mdss-dsi-panel-name = + "nt35597 video mode dsi truly panel with DSC"; + qcom,mdss-dsi-panel-type = "dsi_video_mode"; + + qcom,dsi-ctrl-num = <1>; + qcom,dsi-phy-num = <1>; + qcom,dsi-select-clocks = "src_byte_clk1", "src_pixel_clk1"; + + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-bpp = <24>; + qcom,mdss-dsi-underflow-color = <0xff>; + qcom,mdss-dsi-border-color = <0>; + qcom,mdss-dsi-panel-hdr-enabled; + qcom,mdss-dsi-panel-hdr-color-primaries = <14500 15500 32000 + 17000 15500 30000 8000 3000>; + qcom,mdss-dsi-panel-peak-brightness = <4200000>; + qcom,mdss-dsi-panel-blackness-level = <3230>; + qcom,mdss-dsi-traffic-mode = "non_burst_sync_event"; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>; + qcom,mdss-pan-physical-width-dimension = <74>; + qcom,mdss-pan-physical-height-dimension = <131>; + qcom,mdss-dsi-dma-schedule-line = <5>; + + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-width = <1440>; + qcom,mdss-dsi-panel-height = <2560>; + qcom,mdss-dsi-h-front-porch = <100>; + qcom,mdss-dsi-h-back-porch = <32>; + qcom,mdss-dsi-h-pulse-width = <16>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <8>; + qcom,mdss-dsi-v-front-porch = <10>; + qcom,mdss-dsi-v-pulse-width = <2>; + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-on-command = [ + /* CMD2_P0 */ + 15 01 00 00 00 00 02 ff 20 + 15 01 00 00 00 00 02 fb 01 + 15 01 00 00 00 00 02 00 01 + 15 01 00 00 00 00 02 01 55 + 15 01 00 00 00 00 02 02 45 + 15 01 00 00 00 00 02 05 40 + 15 01 00 00 00 00 02 06 19 + 15 01 00 00 00 00 02 07 1e + 15 01 00 00 00 00 02 0b 73 + 15 01 00 00 00 00 02 0c 73 + 15 01 00 00 00 00 02 0e b0 + 15 01 00 00 00 00 02 0f aE + 15 01 00 00 00 00 02 11 b8 + 15 01 00 00 00 00 02 13 00 + 15 01 00 00 00 00 02 58 80 + 15 01 00 00 00 00 02 59 01 + 15 01 00 00 00 00 02 5a 00 + 15 01 00 00 00 00 02 5b 01 + 15 01 00 00 00 00 02 5c 80 + 15 01 00 00 00 00 02 5d 81 + 15 01 00 00 00 00 02 5e 00 + 15 01 00 00 00 00 02 5f 01 + 15 01 00 00 00 00 02 72 31 + 15 01 00 00 00 00 02 68 03 + /* CMD2_P4 */ + 15 01 00 00 00 00 02 ff 24 + 15 01 00 00 00 00 02 fb 01 + 15 01 00 00 00 00 02 00 1c + 15 01 00 00 00 00 02 01 0b + 15 01 00 00 00 00 02 02 0c + 15 01 00 00 00 00 02 03 01 + 15 01 00 00 00 00 02 04 0f + 15 01 00 00 00 00 02 05 10 + 15 01 00 00 00 00 02 06 10 + 15 01 00 00 00 00 02 07 10 + 15 01 00 00 00 00 02 08 89 + 15 01 00 00 00 00 02 09 8a + 15 01 00 00 00 00 02 0a 13 + 15 01 00 00 00 00 02 0b 13 + 15 01 00 00 00 00 02 0c 15 + 15 01 00 00 00 00 02 0d 15 + 15 01 00 00 00 00 02 0e 17 + 15 01 00 00 00 00 02 0f 17 + 15 01 00 00 00 00 02 10 1c + 15 01 00 00 00 00 02 11 0b + 15 01 00 00 00 00 02 12 0c + 15 01 00 00 00 00 02 13 01 + 15 01 00 00 00 00 02 14 0f + 15 01 00 00 00 00 02 15 10 + 15 01 00 00 00 00 02 16 10 + 15 01 00 00 00 00 02 17 10 + 15 01 00 00 00 00 02 18 89 + 15 01 00 00 00 00 02 19 8a + 15 01 00 00 00 00 02 1a 13 + 15 01 00 00 00 00 02 1b 13 + 15 01 00 00 00 00 02 1c 15 + 15 01 00 00 00 00 02 1d 15 + 15 01 00 00 00 00 02 1e 17 + 15 01 00 00 00 00 02 1f 17 + /* STV */ + 15 01 00 00 00 00 02 20 40 + 15 01 00 00 00 00 02 21 01 + 15 01 00 00 00 00 02 22 00 + 15 01 00 00 00 00 02 23 40 + 15 01 00 00 00 00 02 24 40 + 15 01 00 00 00 00 02 25 6d + 15 01 00 00 00 00 02 26 40 + 15 01 00 00 00 00 02 27 40 + /* Vend */ + 15 01 00 00 00 00 02 e0 00 + 15 01 00 00 00 00 02 dc 21 + 15 01 00 00 00 00 02 dd 22 + 15 01 00 00 00 00 02 de 07 + 15 01 00 00 00 00 02 df 07 + 15 01 00 00 00 00 02 e3 6d + 15 01 00 00 00 00 02 e1 07 + 15 01 00 00 00 00 02 e2 07 + /* UD */ + 15 01 00 00 00 00 02 29 d8 + 15 01 00 00 00 00 02 2a 2a + /* CLK */ + 15 01 00 00 00 00 02 4b 03 + 15 01 00 00 00 00 02 4c 11 + 15 01 00 00 00 00 02 4d 10 + 15 01 00 00 00 00 02 4e 01 + 15 01 00 00 00 00 02 4f 01 + 15 01 00 00 00 00 02 50 10 + 15 01 00 00 00 00 02 51 00 + 15 01 00 00 00 00 02 52 80 + 15 01 00 00 00 00 02 53 00 + 15 01 00 00 00 00 02 56 00 + 15 01 00 00 00 00 02 54 07 + 15 01 00 00 00 00 02 58 07 + 15 01 00 00 00 00 02 55 25 + /* Reset XDONB */ + 15 01 00 00 00 00 02 5b 43 + 15 01 00 00 00 00 02 5c 00 + 15 01 00 00 00 00 02 5f 73 + 15 01 00 00 00 00 02 60 73 + 15 01 00 00 00 00 02 63 22 + 15 01 00 00 00 00 02 64 00 + 15 01 00 00 00 00 02 67 08 + 15 01 00 00 00 00 02 68 04 + /* Resolution:1440x2560*/ + 15 01 00 00 00 00 02 72 02 + /* mux */ + 15 01 00 00 00 00 02 7a 80 + 15 01 00 00 00 00 02 7b 91 + 15 01 00 00 00 00 02 7c d8 + 15 01 00 00 00 00 02 7d 60 + 15 01 00 00 00 00 02 7f 15 + 15 01 00 00 00 00 02 75 15 + /* ABOFF */ + 15 01 00 00 00 00 02 b3 c0 + 15 01 00 00 00 00 02 b4 00 + 15 01 00 00 00 00 02 b5 00 + /* Source EQ */ + 15 01 00 00 00 00 02 78 00 + 15 01 00 00 00 00 02 79 00 + 15 01 00 00 00 00 02 80 00 + 15 01 00 00 00 00 02 83 00 + /* FP BP */ + 15 01 00 00 00 00 02 93 0a + 15 01 00 00 00 00 02 94 0a + /* Inversion Type */ + 15 01 00 00 00 00 02 8a 00 + 15 01 00 00 00 00 02 9b ff + /* IMGSWAP =1 @PortSwap=1 */ + 15 01 00 00 00 00 02 9d b0 + 15 01 00 00 00 00 02 9f 63 + 15 01 00 00 00 00 02 98 10 + /* FRM */ + 15 01 00 00 00 00 02 ec 00 + /* CMD1 */ + 15 01 00 00 00 00 02 ff 10 + /* VESA DSC PPS settings + * (1440x2560 slide 16H) + */ + 39 01 00 00 00 00 11 c1 09 + 20 00 10 02 00 02 68 01 bb + 00 0a 06 67 04 c5 + + 39 01 00 00 00 00 03 c2 10 f0 + /* C0h = 0x00(2 Port SDC); + * 0x01(1 PortA FBC); + * 0x02(MTK); 0x03(1 PortA VESA) + */ + 15 01 00 00 00 00 02 c0 03 + /* VBP+VSA=,VFP = 10H */ + 39 01 00 00 00 00 04 3b 03 0a 0a + /* FTE on */ + 15 01 00 00 00 00 02 35 00 + /* EN_BK =1(auto black) */ + 15 01 00 00 00 00 02 e5 01 + /* CMD mode(10) VDO mode(03) */ + 15 01 00 00 00 00 02 bb 03 + /* Non Reload MTP */ + 15 01 00 00 00 00 02 fb 01 + /* SlpOut + DispOn */ + 05 01 00 00 78 00 02 11 00 + 05 01 00 00 78 00 02 29 00 + ]; + qcom,mdss-dsi-off-command = [05 01 00 00 78 00 + 02 28 00 05 01 00 00 78 00 02 10 00]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + qcom,mdss-dsi-h-sync-pulse = <0>; + qcom,compression-mode = "dsc"; + qcom,mdss-dsc-slice-height = <16>; + qcom,mdss-dsc-slice-width = <720>; + qcom,mdss-dsc-slice-per-pkt = <2>; + qcom,mdss-dsc-bit-per-component = <8>; + qcom,mdss-dsc-bit-per-pixel = <8>; + qcom,mdss-dsc-block-prediction-enable; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-nt35597-truly-dualmipi-wqxga-cmd.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-nt35597-truly-dualmipi-wqxga-cmd.dtsi new file mode 100644 index 000000000000..cddf9165ff1f --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-nt35597-truly-dualmipi-wqxga-cmd.dtsi @@ -0,0 +1,219 @@ +&mdss_mdp { + dsi_dual_nt35597_truly_cmd: qcom,mdss_dsi_nt35597_truly_wqxga_cmd { + qcom,mdss-dsi-panel-name = + "Dual nt35597 cmd mode dsi truly panel without DSC"; + qcom,mdss-dsi-panel-type = "dsi_cmd_mode"; + + qcom,dsi-ctrl-num = <0 1>; + qcom,dsi-phy-num = <0 1>; + qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0"; + + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-bpp = <24>; + qcom,mdss-dsi-color-order = "rgb_swap_rgb"; + qcom,mdss-dsi-underflow-color = <0xff>; + qcom,mdss-dsi-border-color = <0>; + qcom,mdss-dsi-traffic-mode = "non_burst_sync_event"; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,adjust-timer-wakeup-ms = <1>; + qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>; + qcom,mdss-pan-physical-width-dimension = <74>; + qcom,mdss-pan-physical-height-dimension = <131>; + qcom,mdss-dsi-bl-max-level = <4095>; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + qcom,mdss-dsi-te-pin-select = <1>; + qcom,mdss-dsi-wr-mem-start = <0x2c>; + qcom,mdss-dsi-wr-mem-continue = <0x3c>; + qcom,mdss-dsi-te-dcs-command = <1>; + qcom,mdss-dsi-te-check-enable; + qcom,mdss-dsi-te-using-te-pin; + qcom,mdss-dsi-panel-hdr-enabled; + qcom,mdss-dsi-panel-hdr-color-primaries = <14500 15500 32000 + 17000 15500 30000 8000 3000>; + qcom,mdss-dsi-panel-peak-brightness = <4200000>; + qcom,mdss-dsi-panel-blackness-level = <3230>; + + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-panel-width = <720>; + qcom,mdss-dsi-panel-height = <2560>; + qcom,mdss-dsi-h-front-porch = <100>; + qcom,mdss-dsi-h-back-porch = <32>; + qcom,mdss-dsi-h-pulse-width = <16>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <7>; + qcom,mdss-dsi-v-front-porch = <8>; + qcom,mdss-dsi-v-pulse-width = <1>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-h-sync-pulse = <0>; + qcom,mdss-dsi-panel-jitter = <0x1 0x1>; + qcom,mdss-dsi-on-command = [ + /* CMD2_P0 */ + 15 01 00 00 00 00 02 FF 20 + 15 01 00 00 00 00 02 fb 01 + 15 01 00 00 00 00 02 00 01 + 15 01 00 00 00 00 02 01 55 + 15 01 00 00 00 00 02 02 45 + 15 01 00 00 00 00 02 05 40 + 15 01 00 00 00 00 02 06 19 + 15 01 00 00 00 00 02 07 1E + 15 01 00 00 00 00 02 0B 73 + 15 01 00 00 00 00 02 0C 73 + 15 01 00 00 00 00 02 0E B0 + 15 01 00 00 00 00 02 0F AE + 15 01 00 00 00 00 02 11 B8 + 15 01 00 00 00 00 02 13 00 + 15 01 00 00 00 00 02 58 80 + 15 01 00 00 00 00 02 59 01 + 15 01 00 00 00 00 02 5A 00 + 15 01 00 00 00 00 02 5B 01 + 15 01 00 00 00 00 02 5C 80 + 15 01 00 00 00 00 02 5D 81 + 15 01 00 00 00 00 02 5E 00 + 15 01 00 00 00 00 02 5F 01 + 15 01 00 00 00 00 02 72 31 + 15 01 00 00 00 00 02 68 03 + /* CMD2_P4 */ + 15 01 00 00 00 00 02 ff 24 + 15 01 00 00 00 00 02 fb 01 + 15 01 00 00 00 00 02 00 1C + 15 01 00 00 00 00 02 01 0B + 15 01 00 00 00 00 02 02 0C + 15 01 00 00 00 00 02 03 01 + 15 01 00 00 00 00 02 04 0F + 15 01 00 00 00 00 02 05 10 + 15 01 00 00 00 00 02 06 10 + 15 01 00 00 00 00 02 07 10 + 15 01 00 00 00 00 02 08 89 + 15 01 00 00 00 00 02 09 8A + 15 01 00 00 00 00 02 0A 13 + 15 01 00 00 00 00 02 0B 13 + 15 01 00 00 00 00 02 0C 15 + 15 01 00 00 00 00 02 0D 15 + 15 01 00 00 00 00 02 0E 17 + 15 01 00 00 00 00 02 0F 17 + 15 01 00 00 00 00 02 10 1C + 15 01 00 00 00 00 02 11 0B + 15 01 00 00 00 00 02 12 0C + 15 01 00 00 00 00 02 13 01 + 15 01 00 00 00 00 02 14 0F + 15 01 00 00 00 00 02 15 10 + 15 01 00 00 00 00 02 16 10 + 15 01 00 00 00 00 02 17 10 + 15 01 00 00 00 00 02 18 89 + 15 01 00 00 00 00 02 19 8A + 15 01 00 00 00 00 02 1A 13 + 15 01 00 00 00 00 02 1B 13 + 15 01 00 00 00 00 02 1C 15 + 15 01 00 00 00 00 02 1D 15 + 15 01 00 00 00 00 02 1E 17 + 15 01 00 00 00 00 02 1F 17 + /* STV */ + 15 01 00 00 00 00 02 20 40 + 15 01 00 00 00 00 02 21 01 + 15 01 00 00 00 00 02 22 00 + 15 01 00 00 00 00 02 23 40 + 15 01 00 00 00 00 02 24 40 + 15 01 00 00 00 00 02 25 6D + 15 01 00 00 00 00 02 26 40 + 15 01 00 00 00 00 02 27 40 + /* Vend */ + 15 01 00 00 00 00 02 E0 00 + 15 01 00 00 00 00 02 DC 21 + 15 01 00 00 00 00 02 DD 22 + 15 01 00 00 00 00 02 DE 07 + 15 01 00 00 00 00 02 DF 07 + 15 01 00 00 00 00 02 E3 6D + 15 01 00 00 00 00 02 E1 07 + 15 01 00 00 00 00 02 E2 07 + /* UD */ + 15 01 00 00 00 00 02 29 D8 + 15 01 00 00 00 00 02 2A 2A + /* CLK */ + 15 01 00 00 00 00 02 4B 03 + 15 01 00 00 00 00 02 4C 11 + 15 01 00 00 00 00 02 4D 10 + 15 01 00 00 00 00 02 4E 01 + 15 01 00 00 00 00 02 4F 01 + 15 01 00 00 00 00 02 50 10 + 15 01 00 00 00 00 02 51 00 + 15 01 00 00 00 00 02 52 80 + 15 01 00 00 00 00 02 53 00 + 15 01 00 00 00 00 02 56 00 + 15 01 00 00 00 00 02 54 07 + 15 01 00 00 00 00 02 58 07 + 15 01 00 00 00 00 02 55 25 + /* Reset XDONB */ + 15 01 00 00 00 00 02 5B 43 + 15 01 00 00 00 00 02 5C 00 + 15 01 00 00 00 00 02 5F 73 + 15 01 00 00 00 00 02 60 73 + 15 01 00 00 00 00 02 63 22 + 15 01 00 00 00 00 02 64 00 + 15 01 00 00 00 00 02 67 08 + 15 01 00 00 00 00 02 68 04 + /* Resolution:1440x2560*/ + 15 01 00 00 00 00 02 72 02 + /* mux */ + 15 01 00 00 00 00 02 7A 80 + 15 01 00 00 00 00 02 7B 91 + 15 01 00 00 00 00 02 7C D8 + 15 01 00 00 00 00 02 7D 60 + 15 01 00 00 00 00 02 7F 15 + 15 01 00 00 00 00 02 75 15 + /* ABOFF */ + 15 01 00 00 00 00 02 B3 C0 + 15 01 00 00 00 00 02 B4 00 + 15 01 00 00 00 00 02 B5 00 + /* Source EQ */ + 15 01 00 00 00 00 02 78 00 + 15 01 00 00 00 00 02 79 00 + 15 01 00 00 00 00 02 80 00 + 15 01 00 00 00 00 02 83 00 + /* FP BP */ + 15 01 00 00 00 00 02 93 0A + 15 01 00 00 00 00 02 94 0A + /* Inversion Type */ + 15 01 00 00 00 00 02 8A 00 + 15 01 00 00 00 00 02 9B FF + /* IMGSWAP =1 @PortSwap=1 */ + 15 01 00 00 00 00 02 9D B0 + 15 01 00 00 00 00 02 9F 63 + 15 01 00 00 00 00 02 98 10 + /* FRM */ + 15 01 00 00 00 00 02 EC 00 + /* CMD1 */ + 15 01 00 00 00 00 02 ff 10 + /* VBP+VSA=,VFP = 10H */ + 15 01 00 00 00 00 04 3B 03 0A 0A + /* FTE on */ + 15 01 00 00 00 00 02 35 00 + /* EN_BK =1(auto black) */ + 15 01 00 00 00 00 02 E5 01 + /* CMD mode(10) VDO mode(03) */ + 15 01 00 00 00 00 02 BB 10 + /* Non Reload MTP */ + 15 01 00 00 00 00 02 FB 01 + /* SlpOut + DispOn */ + 05 01 00 00 78 00 02 11 00 + 05 01 00 00 78 00 02 29 00 + ]; + qcom,mdss-dsi-off-command = [05 01 00 00 78 00 + 02 28 00 05 01 00 00 78 00 02 10 00]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-nt35597-truly-dualmipi-wqxga-video.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-nt35597-truly-dualmipi-wqxga-video.dtsi new file mode 100644 index 000000000000..aff695014114 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-nt35597-truly-dualmipi-wqxga-video.dtsi @@ -0,0 +1,206 @@ +&mdss_mdp { + dsi_dual_nt35597_truly_video: qcom,mdss_dsi_nt35597_wqxga_video_truly { + qcom,mdss-dsi-panel-name = + "Dual nt35597 video mode dsi truly panel without DSC"; + qcom,mdss-dsi-panel-type = "dsi_video_mode"; + + qcom,dsi-ctrl-num = <0 1>; + qcom,dsi-phy-num = <0 1>; + qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0"; + + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-panel-hdr-enabled; + qcom,mdss-dsi-panel-hdr-color-primaries = <14500 15500 32000 + 17000 15500 30000 8000 3000>; + qcom,mdss-dsi-panel-peak-brightness = <4200000>; + qcom,mdss-dsi-panel-blackness-level = <3230>; + qcom,mdss-dsi-traffic-mode = "non_burst_sync_event"; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + qcom,mdss-dsi-reset-sequence = <1 20>, <0 20>, <1 50>; + qcom,mdss-pan-physical-width-dimension = <74>; + qcom,mdss-pan-physical-height-dimension = <131>; + qcom,mdss-dsi-tx-eot-append; + qcom,mdss-dsi-underflow-color = <0x3ff>; + qcom,mdss-dsi-border-color = <0>; + qcom,mdss-dsi-bpp = <24>; + + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-width = <720>; + qcom,mdss-dsi-panel-height = <2560>; + qcom,mdss-dsi-h-front-porch = <100>; + qcom,mdss-dsi-h-back-porch = <32>; + qcom,mdss-dsi-h-pulse-width = <16>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <7>; + qcom,mdss-dsi-v-front-porch = <8>; + qcom,mdss-dsi-v-pulse-width = <1>; + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-on-command = [ + /* CMD2_P0 */ + 15 01 00 00 00 00 02 FF 20 + 15 01 00 00 00 00 02 FB 01 + 15 01 00 00 00 00 02 00 01 + 15 01 00 00 00 00 02 01 55 + 15 01 00 00 00 00 02 02 45 + 15 01 00 00 00 00 02 05 40 + 15 01 00 00 00 00 02 06 19 + 15 01 00 00 00 00 02 07 1E + 15 01 00 00 00 00 02 0B 73 + 15 01 00 00 00 00 02 0C 73 + 15 01 00 00 00 00 02 0E B0 + 15 01 00 00 00 00 02 0F AE + 15 01 00 00 00 00 02 11 B8 + 15 01 00 00 00 00 02 13 00 + 15 01 00 00 00 00 02 58 80 + 15 01 00 00 00 00 02 59 01 + 15 01 00 00 00 00 02 5A 00 + 15 01 00 00 00 00 02 5B 01 + 15 01 00 00 00 00 02 5C 80 + 15 01 00 00 00 00 02 5D 81 + 15 01 00 00 00 00 02 5E 00 + 15 01 00 00 00 00 02 5F 01 + 15 01 00 00 00 00 02 72 31 + 15 01 00 00 00 00 02 68 03 + /* CMD2_P4 */ + 15 01 00 00 00 00 02 FF 24 + 15 01 00 00 00 00 02 FB 01 + 15 01 00 00 00 00 02 00 1C + 15 01 00 00 00 00 02 01 0B + 15 01 00 00 00 00 02 02 0C + 15 01 00 00 00 00 02 03 01 + 15 01 00 00 00 00 02 04 0F + 15 01 00 00 00 00 02 05 10 + 15 01 00 00 00 00 02 06 10 + 15 01 00 00 00 00 02 07 10 + 15 01 00 00 00 00 02 08 89 + 15 01 00 00 00 00 02 09 8A + 15 01 00 00 00 00 02 0A 13 + 15 01 00 00 00 00 02 0B 13 + 15 01 00 00 00 00 02 0C 15 + 15 01 00 00 00 00 02 0D 15 + 15 01 00 00 00 00 02 0E 17 + 15 01 00 00 00 00 02 0F 17 + 15 01 00 00 00 00 02 10 1C + 15 01 00 00 00 00 02 11 0B + 15 01 00 00 00 00 02 12 0C + 15 01 00 00 00 00 02 13 01 + 15 01 00 00 00 00 02 14 0F + 15 01 00 00 00 00 02 15 10 + 15 01 00 00 00 00 02 16 10 + 15 01 00 00 00 00 02 17 10 + 15 01 00 00 00 00 02 18 89 + 15 01 00 00 00 00 02 19 8A + 15 01 00 00 00 00 02 1A 13 + 15 01 00 00 00 00 02 1B 13 + 15 01 00 00 00 00 02 1C 15 + 15 01 00 00 00 00 02 1D 15 + 15 01 00 00 00 00 02 1E 17 + 15 01 00 00 00 00 02 1F 17 + /* STV */ + 15 01 00 00 00 00 02 20 40 + 15 01 00 00 00 00 02 21 01 + 15 01 00 00 00 00 02 22 00 + 15 01 00 00 00 00 02 23 40 + 15 01 00 00 00 00 02 24 40 + 15 01 00 00 00 00 02 25 6D + 15 01 00 00 00 00 02 26 40 + 15 01 00 00 00 00 02 27 40 + /* Vend */ + 15 01 00 00 00 00 02 E0 00 + 15 01 00 00 00 00 02 DC 21 + 15 01 00 00 00 00 02 DD 22 + 15 01 00 00 00 00 02 DE 07 + 15 01 00 00 00 00 02 DF 07 + 15 01 00 00 00 00 02 E3 6D + 15 01 00 00 00 00 02 E1 07 + 15 01 00 00 00 00 02 E2 07 + /* UD */ + 15 01 00 00 00 00 02 29 D8 + 15 01 00 00 00 00 02 2A 2A + /* CLK */ + 15 01 00 00 00 00 02 4B 03 + 15 01 00 00 00 00 02 4C 11 + 15 01 00 00 00 00 02 4D 10 + 15 01 00 00 00 00 02 4E 01 + 15 01 00 00 00 00 02 4F 01 + 15 01 00 00 00 00 02 50 10 + 15 01 00 00 00 00 02 51 00 + 15 01 00 00 00 00 02 52 80 + 15 01 00 00 00 00 02 53 00 + 15 01 00 00 00 00 02 56 00 + 15 01 00 00 00 00 02 54 07 + 15 01 00 00 00 00 02 58 07 + 15 01 00 00 00 00 02 55 25 + /* Reset XDONB */ + 15 01 00 00 00 00 02 5B 43 + 15 01 00 00 00 00 02 5C 00 + 15 01 00 00 00 00 02 5F 73 + 15 01 00 00 00 00 02 60 73 + 15 01 00 00 00 00 02 63 22 + 15 01 00 00 00 00 02 64 00 + 15 01 00 00 00 00 02 67 08 + 15 01 00 00 00 00 02 68 04 + /* Resolution:1440x2560*/ + 15 01 00 00 00 00 02 72 02 + /* mux */ + 15 01 00 00 00 00 02 7A 80 + 15 01 00 00 00 00 02 7B 91 + 15 01 00 00 00 00 02 7C D8 + 15 01 00 00 00 00 02 7D 60 + 15 01 00 00 00 00 02 7F 15 + 15 01 00 00 00 00 02 75 15 + /* ABOFF */ + 15 01 00 00 00 00 02 B3 C0 + 15 01 00 00 00 00 02 B4 00 + 15 01 00 00 00 00 02 B5 00 + /* Source EQ */ + 15 01 00 00 00 00 02 78 00 + 15 01 00 00 00 00 02 79 00 + 15 01 00 00 00 00 02 80 00 + 15 01 00 00 00 00 02 83 00 + /* FP BP */ + 15 01 00 00 00 00 02 93 0A + 15 01 00 00 00 00 02 94 0A + /* Inversion Type */ + 15 01 00 00 00 00 02 8A 00 + 15 01 00 00 00 00 02 9B FF + /* IMGSWAP =1 @PortSwap=1 */ + 15 01 00 00 00 00 02 9D B0 + 15 01 00 00 00 00 02 9F 63 + 15 01 00 00 00 00 02 98 10 + /* FRM */ + 15 01 00 00 00 00 02 EC 00 + /* CMD1 */ + 15 01 00 00 00 00 02 FF 10 + /* VBP+VSA=,VFP = 10H */ + 15 01 00 00 00 00 04 3B 03 0A 0A + /* FTE on */ + 15 01 00 00 00 00 02 35 00 + /* EN_BK =1(auto black) */ + 15 01 00 00 00 00 02 E5 01 + /* CMD mode(10) VDO mode(03) */ + 15 01 00 00 00 00 02 BB 03 + /* Non Reload MTP */ + 15 01 00 00 00 00 02 FB 01 + /* SlpOut + DispOn */ + 05 01 00 00 78 00 02 11 00 + 05 01 00 00 78 00 02 29 00 + ]; + qcom,mdss-dsi-off-command = [05 01 00 00 78 00 + 02 28 00 05 01 00 00 78 00 02 10 00]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + qcom,mdss-dsi-h-sync-pulse = <0>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-nt35695b-truly-fhd-cmd.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-nt35695b-truly-fhd-cmd.dtsi new file mode 100644 index 000000000000..ffefa6a671d6 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-nt35695b-truly-fhd-cmd.dtsi @@ -0,0 +1,185 @@ +&mdss_mdp { + dsi_nt35695b_truly_fhd_cmd: qcom,mdss_dsi_nt35695b_truly_fhd_cmd { + qcom,mdss-dsi-panel-name = + "nt35695b truly fhd command mode dsi panel"; + qcom,mdss-dsi-panel-type = "dsi_cmd_mode"; + + qcom,dsi-ctrl-num = <0>; + qcom,dsi-phy-num = <0>; + qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0"; + + qcom,dsi-sec-ctrl-num = <1>; + qcom,dsi-sec-phy-num = <1>; + qcom,dsi-select-sec-clocks = "src_byte_clk1", "src_pixel_clk1"; + + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-bpp = <24>; + qcom,mdss-dsi-underflow-color = <0xff>; + qcom,mdss-dsi-border-color = <0>; + qcom,mdss-dsi-traffic-mode = "burst_mode"; + qcom,mdss-dsi-te-pin-select = <1>; + qcom,mdss-dsi-te-dcs-command = <1>; + qcom,mdss-dsi-te-check-enable; + qcom,mdss-dsi-te-using-te-pin; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>; + qcom,mdss-dsi-tx-eot-append; + qcom,mdss-dsi-post-init-delay = <1>; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-width = <1080>; + qcom,mdss-dsi-panel-height = <1920>; + qcom,mdss-dsi-h-front-porch = <120>; + qcom,mdss-dsi-h-back-porch = <60>; + qcom,mdss-dsi-h-pulse-width = <12>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <2>; + qcom,mdss-dsi-v-front-porch = <12>; + qcom,mdss-dsi-v-pulse-width = <2>; + qcom,mdss-dsi-h-sync-pulse = <0>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-on-command = + [15 01 00 00 10 00 02 ff 20 + 15 01 00 00 00 00 02 fb 01 + 15 01 00 00 00 00 02 00 01 + 15 01 00 00 00 00 02 01 55 + 15 01 00 00 00 00 02 02 45 + 15 01 00 00 00 00 02 03 55 + 15 01 00 00 00 00 02 05 50 + 15 01 00 00 00 00 02 06 a8 + 15 01 00 00 00 00 02 07 ad + 15 01 00 00 00 00 02 08 0c + 15 01 00 00 00 00 02 0b aa + 15 01 00 00 00 00 02 0c aa + 15 01 00 00 00 00 02 0e b0 + 15 01 00 00 00 00 02 0f b3 + 15 01 00 00 00 00 02 11 28 + 15 01 00 00 00 00 02 12 10 + 15 01 00 00 00 00 02 13 01 + 15 01 00 00 00 00 02 14 4a + 15 01 00 00 00 00 02 15 12 + 15 01 00 00 00 00 02 16 12 + 15 01 00 00 00 00 02 30 01 + 15 01 00 00 00 00 02 72 11 + 15 01 00 00 00 00 02 58 82 + 15 01 00 00 00 00 02 59 00 + 15 01 00 00 00 00 02 5a 02 + 15 01 00 00 00 00 02 5b 00 + 15 01 00 00 00 00 02 5c 82 + 15 01 00 00 00 00 02 5d 80 + 15 01 00 00 00 00 02 5e 02 + 15 01 00 00 00 00 02 5f 00 + 15 01 00 00 00 00 02 ff 24 + 15 01 00 00 00 00 02 fb 01 + 15 01 00 00 00 00 02 00 01 + 15 01 00 00 00 00 02 01 0b + 15 01 00 00 00 00 02 02 0c + 15 01 00 00 00 00 02 03 89 + 15 01 00 00 00 00 02 04 8a + 15 01 00 00 00 00 02 05 0f + 15 01 00 00 00 00 02 06 10 + 15 01 00 00 00 00 02 07 10 + 15 01 00 00 00 00 02 08 1c + 15 01 00 00 00 00 02 09 00 + 15 01 00 00 00 00 02 0a 00 + 15 01 00 00 00 00 02 0b 00 + 15 01 00 00 00 00 02 0c 00 + 15 01 00 00 00 00 02 0d 13 + 15 01 00 00 00 00 02 0e 15 + 15 01 00 00 00 00 02 0f 17 + 15 01 00 00 00 00 02 10 01 + 15 01 00 00 00 00 02 11 0b + 15 01 00 00 00 00 02 12 0c + 15 01 00 00 00 00 02 13 89 + 15 01 00 00 00 00 02 14 8a + 15 01 00 00 00 00 02 15 0f + 15 01 00 00 00 00 02 16 10 + 15 01 00 00 00 00 02 17 10 + 15 01 00 00 00 00 02 18 1c + 15 01 00 00 00 00 02 19 00 + 15 01 00 00 00 00 02 1a 00 + 15 01 00 00 00 00 02 1b 00 + 15 01 00 00 00 00 02 1c 00 + 15 01 00 00 00 00 02 1d 13 + 15 01 00 00 00 00 02 1e 15 + 15 01 00 00 00 00 02 1f 17 + 15 01 00 00 00 00 02 20 00 + 15 01 00 00 00 00 02 21 01 + 15 01 00 00 00 00 02 22 00 + 15 01 00 00 00 00 02 23 40 + 15 01 00 00 00 00 02 24 40 + 15 01 00 00 00 00 02 25 6d + 15 01 00 00 00 00 02 26 40 + 15 01 00 00 00 00 02 27 40 + 15 01 00 00 00 00 02 29 d8 + 15 01 00 00 00 00 02 2a 2a + 15 01 00 00 00 00 02 4b 03 + 15 01 00 00 00 00 02 4c 11 + 15 01 00 00 00 00 02 4d 10 + 15 01 00 00 00 00 02 4e 01 + 15 01 00 00 00 00 02 4f 01 + 15 01 00 00 00 00 02 50 10 + 15 01 00 00 00 00 02 51 00 + 15 01 00 00 00 00 02 52 80 + 15 01 00 00 00 00 02 53 00 + 15 01 00 00 00 00 02 54 07 + 15 01 00 00 00 00 02 55 25 + 15 01 00 00 00 00 02 56 00 + 15 01 00 00 00 00 02 58 07 + 15 01 00 00 00 00 02 5b 43 + 15 01 00 00 00 00 02 5c 00 + 15 01 00 00 00 00 02 5f 73 + 15 01 00 00 00 00 02 60 73 + 15 01 00 00 00 00 02 63 22 + 15 01 00 00 00 00 02 64 00 + 15 01 00 00 00 00 02 67 08 + 15 01 00 00 00 00 02 68 04 + 15 01 00 00 00 00 02 7a 80 + 15 01 00 00 00 00 02 7b 91 + 15 01 00 00 00 00 02 7c d8 + 15 01 00 00 00 00 02 7d 60 + 15 01 00 00 00 00 02 93 06 + 15 01 00 00 00 00 02 94 06 + 15 01 00 00 00 00 02 8a 00 + 15 01 00 00 00 00 02 9b 0f + 15 01 00 00 00 00 02 b3 c0 + 15 01 00 00 00 00 02 b4 00 + 15 01 00 00 00 00 02 b5 00 + 15 01 00 00 00 00 02 b6 21 + 15 01 00 00 00 00 02 b7 22 + 15 01 00 00 00 00 02 b8 07 + 15 01 00 00 00 00 02 b9 07 + 15 01 00 00 00 00 02 ba 22 + 15 01 00 00 00 00 02 bd 20 + 15 01 00 00 00 00 02 be 07 + 15 01 00 00 00 00 02 bf 07 + 15 01 00 00 00 00 02 c1 6d + 15 01 00 00 00 00 02 c4 24 + 15 01 00 00 00 00 02 e3 00 + 15 01 00 00 00 00 02 ec 00 + 15 01 00 00 00 00 02 ff 10 + 15 01 00 00 00 00 02 bb 10 + 15 01 00 00 00 00 02 35 00 + 05 01 00 00 78 00 02 11 00 + 05 01 00 00 78 00 02 29 00]; + qcom,mdss-dsi-off-command = [05 01 00 00 14 + 00 02 28 00 05 01 00 00 78 00 02 10 00]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command-state = "dsi_lp_mode"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-nt35695b-truly-fhd-video.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-nt35695b-truly-fhd-video.dtsi new file mode 100644 index 000000000000..fe84525de197 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-nt35695b-truly-fhd-video.dtsi @@ -0,0 +1,177 @@ +&mdss_mdp { + dsi_nt35695b_truly_fhd_video: qcom,mdss_dsi_nt35695b_truly_fhd_video { + qcom,mdss-dsi-panel-name = + "nt35695b truly fhd video mode dsi panel"; + qcom,mdss-dsi-panel-type = "dsi_video_mode"; + + qcom,dsi-ctrl-num = <0>; + qcom,dsi-phy-num = <0>; + qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0"; + + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-bpp = <24>; + qcom,mdss-dsi-underflow-color = <0xff>; + qcom,mdss-dsi-border-color = <0>; + qcom,mdss-dsi-traffic-mode = "burst_mode"; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>; + qcom,mdss-dsi-tx-eot-append; + qcom,mdss-dsi-post-init-delay = <1>; + + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-width = <1080>; + qcom,mdss-dsi-panel-height = <1920>; + qcom,mdss-dsi-h-front-porch = <120>; + qcom,mdss-dsi-h-back-porch = <60>; + qcom,mdss-dsi-h-pulse-width = <12>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-h-sync-pulse = <0>; + qcom,mdss-dsi-v-back-porch = <2>; + qcom,mdss-dsi-v-front-porch = <12>; + qcom,mdss-dsi-v-pulse-width = <2>; + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-on-command = + [15 01 00 00 10 00 02 ff 20 + 15 01 00 00 00 00 02 fb 01 + 15 01 00 00 00 00 02 00 01 + 15 01 00 00 00 00 02 01 55 + 15 01 00 00 00 00 02 02 45 + 15 01 00 00 00 00 02 03 55 + 15 01 00 00 00 00 02 05 50 + 15 01 00 00 00 00 02 06 a8 + 15 01 00 00 00 00 02 07 ad + 15 01 00 00 00 00 02 08 0c + 15 01 00 00 00 00 02 0b aa + 15 01 00 00 00 00 02 0c aa + 15 01 00 00 00 00 02 0e b0 + 15 01 00 00 00 00 02 0f b3 + 15 01 00 00 00 00 02 11 28 + 15 01 00 00 00 00 02 12 10 + 15 01 00 00 00 00 02 13 01 + 15 01 00 00 00 00 02 14 4a + 15 01 00 00 00 00 02 15 12 + 15 01 00 00 00 00 02 16 12 + 15 01 00 00 00 00 02 30 01 + 15 01 00 00 00 00 02 72 11 + 15 01 00 00 00 00 02 58 82 + 15 01 00 00 00 00 02 59 00 + 15 01 00 00 00 00 02 5a 02 + 15 01 00 00 00 00 02 5b 00 + 15 01 00 00 00 00 02 5c 82 + 15 01 00 00 00 00 02 5d 80 + 15 01 00 00 00 00 02 5e 02 + 15 01 00 00 00 00 02 5f 00 + 15 01 00 00 00 00 02 ff 24 + 15 01 00 00 00 00 02 fb 01 + 15 01 00 00 00 00 02 00 01 + 15 01 00 00 00 00 02 01 0b + 15 01 00 00 00 00 02 02 0c + 15 01 00 00 00 00 02 03 89 + 15 01 00 00 00 00 02 04 8a + 15 01 00 00 00 00 02 05 0f + 15 01 00 00 00 00 02 06 10 + 15 01 00 00 00 00 02 07 10 + 15 01 00 00 00 00 02 08 1c + 15 01 00 00 00 00 02 09 00 + 15 01 00 00 00 00 02 0a 00 + 15 01 00 00 00 00 02 0b 00 + 15 01 00 00 00 00 02 0c 00 + 15 01 00 00 00 00 02 0d 13 + 15 01 00 00 00 00 02 0e 15 + 15 01 00 00 00 00 02 0f 17 + 15 01 00 00 00 00 02 10 01 + 15 01 00 00 00 00 02 11 0b + 15 01 00 00 00 00 02 12 0c + 15 01 00 00 00 00 02 13 89 + 15 01 00 00 00 00 02 14 8a + 15 01 00 00 00 00 02 15 0f + 15 01 00 00 00 00 02 16 10 + 15 01 00 00 00 00 02 17 10 + 15 01 00 00 00 00 02 18 1c + 15 01 00 00 00 00 02 19 00 + 15 01 00 00 00 00 02 1a 00 + 15 01 00 00 00 00 02 1b 00 + 15 01 00 00 00 00 02 1c 00 + 15 01 00 00 00 00 02 1d 13 + 15 01 00 00 00 00 02 1e 15 + 15 01 00 00 00 00 02 1f 17 + 15 01 00 00 00 00 02 20 00 + 15 01 00 00 00 00 02 21 01 + 15 01 00 00 00 00 02 22 00 + 15 01 00 00 00 00 02 23 40 + 15 01 00 00 00 00 02 24 40 + 15 01 00 00 00 00 02 25 6d + 15 01 00 00 00 00 02 26 40 + 15 01 00 00 00 00 02 27 40 + 15 01 00 00 00 00 02 29 d8 + 15 01 00 00 00 00 02 2a 2a + 15 01 00 00 00 00 02 4b 03 + 15 01 00 00 00 00 02 4c 11 + 15 01 00 00 00 00 02 4d 10 + 15 01 00 00 00 00 02 4e 01 + 15 01 00 00 00 00 02 4f 01 + 15 01 00 00 00 00 02 50 10 + 15 01 00 00 00 00 02 51 00 + 15 01 00 00 00 00 02 52 80 + 15 01 00 00 00 00 02 53 00 + 15 01 00 00 00 00 02 54 07 + 15 01 00 00 00 00 02 55 25 + 15 01 00 00 00 00 02 56 00 + 15 01 00 00 00 00 02 58 07 + 15 01 00 00 00 00 02 5b 43 + 15 01 00 00 00 00 02 5c 00 + 15 01 00 00 00 00 02 5f 73 + 15 01 00 00 00 00 02 60 73 + 15 01 00 00 00 00 02 63 22 + 15 01 00 00 00 00 02 64 00 + 15 01 00 00 00 00 02 67 08 + 15 01 00 00 00 00 02 68 04 + 15 01 00 00 00 00 02 7a 80 + 15 01 00 00 00 00 02 7b 91 + 15 01 00 00 00 00 02 7c d8 + 15 01 00 00 00 00 02 7d 60 + 15 01 00 00 00 00 02 93 06 + 15 01 00 00 00 00 02 94 06 + 15 01 00 00 00 00 02 8a 00 + 15 01 00 00 00 00 02 9b 0f + 15 01 00 00 00 00 02 b3 c0 + 15 01 00 00 00 00 02 b4 00 + 15 01 00 00 00 00 02 b5 00 + 15 01 00 00 00 00 02 b6 21 + 15 01 00 00 00 00 02 b7 22 + 15 01 00 00 00 00 02 b8 07 + 15 01 00 00 00 00 02 b9 07 + 15 01 00 00 00 00 02 ba 22 + 15 01 00 00 00 00 02 bd 20 + 15 01 00 00 00 00 02 be 07 + 15 01 00 00 00 00 02 bf 07 + 15 01 00 00 00 00 02 c1 6d + 15 01 00 00 00 00 02 c4 24 + 15 01 00 00 00 00 02 e3 00 + 15 01 00 00 00 00 02 ec 00 + 15 01 00 00 00 00 02 ff 10 + 15 01 00 00 00 00 02 bb 03 + 05 01 00 00 78 00 02 11 00 + 05 01 00 00 78 00 02 29 00]; + qcom,mdss-dsi-off-command = [05 01 00 00 + 14 00 02 28 00 05 01 00 00 78 00 + 02 10 00]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command-state = "dsi_lp_mode"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-nt36850-truly-dualmipi-wqhd-cmd.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-nt36850-truly-dualmipi-wqhd-cmd.dtsi new file mode 100644 index 000000000000..d066925a86f2 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-nt36850-truly-dualmipi-wqhd-cmd.dtsi @@ -0,0 +1,80 @@ +&mdss_mdp { + dsi_dual_nt36850_truly_cmd: qcom,mdss_dsi_nt36850_truly_wqhd_cmd { + qcom,mdss-dsi-panel-name = + "Dual nt36850 cmd mode dsi truly panel without DSC"; + qcom,mdss-dsi-panel-type = "dsi_cmd_mode"; + + qcom,dsi-ctrl-num = <0 1>; + qcom,dsi-phy-num = <0 1>; + qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0"; + + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-bpp = <24>; + qcom,mdss-dsi-color-order = "rgb_swap_rgb"; + qcom,mdss-dsi-underflow-color = <0xff>; + qcom,mdss-dsi-border-color = <0>; + + qcom,mdss-dsi-traffic-mode = "non_burst_sync_event"; + qcom,mdss-dsi-lane-map = "lane_map_0123"; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,mdss-dsi-tx-eot-append; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-wr-mem-start = <0x2c>; + qcom,mdss-dsi-wr-mem-continue = <0x3c>; + qcom,mdss-dsi-te-pin-select = <1>; + qcom,mdss-dsi-te-dcs-command = <1>; + qcom,mdss-dsi-te-check-enable; + qcom,mdss-dsi-te-using-te-pin; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + qcom,mdss-dsi-lp11-init; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; + qcom,mdss-dsi-bl-min-level = <1>; + qcom,mdss-dsi-bl-max-level = <4095>; + qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 50>; + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-panel-width = <720>; + qcom,mdss-dsi-panel-height = <2560>; + qcom,mdss-dsi-h-front-porch = <120>; + qcom,mdss-dsi-h-back-porch = <140>; + qcom,mdss-dsi-h-pulse-width = <20>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <20>; + qcom,mdss-dsi-v-front-porch = <8>; + qcom,mdss-dsi-v-pulse-width = <4>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-on-command = [ + 15 01 00 00 00 00 02 ff 10 + 15 01 00 00 00 00 02 fb 01 + 15 01 00 00 00 00 02 36 00 + 15 01 00 00 00 00 02 35 00 + 39 01 00 00 00 00 03 44 03 e8 + 15 01 00 00 00 00 02 51 ff + 15 01 00 00 00 00 02 53 2c + 15 01 00 00 00 00 02 55 01 + 05 01 00 00 0a 00 02 20 00 + 15 01 00 00 00 00 02 bb 10 + 05 01 00 00 78 00 02 11 00 + 05 01 00 00 78 00 02 29 00 + ]; + qcom,mdss-dsi-off-command = [ + 05 01 00 00 78 00 02 28 00 + 05 01 00 00 78 00 02 10 00 + ]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + qcom,mdss-dsi-h-sync-pulse = <0>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-s6e3ha3-amoled-dualmipi-wqhd-cmd.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-s6e3ha3-amoled-dualmipi-wqhd-cmd.dtsi new file mode 100644 index 000000000000..11eb3a30d232 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-s6e3ha3-amoled-dualmipi-wqhd-cmd.dtsi @@ -0,0 +1,129 @@ +&mdss_mdp { + dsi_dual_s6e3ha3_amoled_cmd: qcom,mdss_dsi_s6e3ha3_amoled_wqhd_cmd { + qcom,mdss-dsi-panel-name = + "Dual s6e3ha3 amoled cmd mode dsi panel"; + qcom,mdss-dsi-panel-type = "dsi_cmd_mode"; + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-panel-width = <720>; + qcom,mdss-dsi-panel-height = <2560>; + qcom,mdss-dsi-h-front-porch = <100>; + qcom,mdss-dsi-h-back-porch = <100>; + qcom,mdss-dsi-h-pulse-width = <40>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <31>; + qcom,mdss-dsi-v-front-porch = <30>; + qcom,mdss-dsi-v-pulse-width = <8>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-bpp = <24>; + qcom,mdss-dsi-underflow-color = <0xff>; + qcom,mdss-dsi-border-color = <0>; + qcom,mdss-dsi-color-order = "rgb_swap_rgb"; + qcom,mdss-dsi-on-command = [05 01 00 00 05 00 02 11 00 + 39 01 00 00 00 00 05 2a 00 00 05 9f + 39 01 00 00 00 00 05 2b 00 00 09 ff + 39 01 00 00 00 00 03 f0 5a 5a + 39 01 00 00 00 00 02 b0 10 + 39 01 00 00 00 00 02 b5 a0 + 39 01 00 00 00 00 02 c4 03 + 39 01 00 00 00 00 0a + f6 42 57 37 00 aa cc d0 00 00 + 39 01 00 00 00 00 02 f9 03 + 39 01 00 00 00 00 14 + c2 00 00 d8 d8 00 80 2b 05 08 + 0e 07 0b 05 0d 0a 15 13 20 1e + 39 01 00 00 78 00 03 f0 a5 a5 + 39 01 00 00 00 00 02 35 00 + 39 01 00 00 00 00 02 53 20 + 39 01 00 00 00 00 02 51 60 + 05 01 00 00 05 00 02 29 00]; + qcom,mdss-dsi-off-command = [05 01 00 00 3c 00 02 28 00 + 05 01 00 00 b4 00 02 10 00]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + qcom,mdss-dsi-lp-mode-on = [39 00 00 00 05 00 03 f0 5a 5a + 39 00 00 00 05 00 03 f1 5a 5a + 39 00 00 00 05 00 03 fc 5a 5a + 39 00 00 00 05 00 02 b0 17 + 39 00 00 00 05 00 02 cb 10 + 39 00 00 00 05 00 02 b0 2d + 39 00 00 00 05 00 02 cb cd + 39 00 00 00 05 00 02 b0 0e + 39 00 00 00 05 00 02 cb 02 + 39 00 00 00 05 00 02 b0 0f + 39 00 00 00 05 00 02 cb 09 + 39 00 00 00 05 00 02 b0 02 + 39 00 00 00 05 00 02 f2 c9 + 39 00 00 00 05 00 02 b0 03 + 39 00 00 00 05 00 02 f2 c0 + 39 00 00 00 05 00 02 b0 03 + 39 00 00 00 05 00 02 f4 aa + 39 00 00 00 05 00 02 b0 08 + 39 00 00 00 05 00 02 b1 30 + 39 00 00 00 05 00 02 b0 09 + 39 00 00 00 05 00 02 b1 0a + 39 00 00 00 05 00 02 b0 0d + 39 00 00 00 05 00 02 b1 10 + 39 00 00 00 05 00 02 b0 00 + 39 00 00 00 05 00 02 f7 03 + 39 00 00 00 05 00 02 fe 30 + 39 01 00 00 05 00 02 fe b0]; + qcom,mdss-dsi-lp-mode-off = [39 00 00 00 05 00 03 f0 5a 5a + 39 00 00 00 05 00 03 f1 5a 5a + 39 00 00 00 05 00 03 fc 5a 5a + 39 00 00 00 05 00 02 b0 2d + 39 00 00 00 05 00 02 cb 4d + 39 00 00 00 05 00 02 b0 17 + 39 00 00 00 05 00 02 cb 04 + 39 00 00 00 05 00 02 b0 0e + 39 00 00 00 05 00 02 cb 06 + 39 00 00 00 05 00 02 b0 0f + 39 00 00 00 05 00 02 cb 05 + 39 00 00 00 05 00 02 b0 02 + 39 00 00 00 05 00 02 f2 b8 + 39 00 00 00 05 00 02 b0 03 + 39 00 00 00 05 00 02 f2 80 + 39 00 00 00 05 00 02 b0 03 + 39 00 00 00 05 00 02 f4 8a + 39 00 00 00 05 00 02 b0 08 + 39 00 00 00 05 00 02 b1 10 + 39 00 00 00 05 00 02 b0 09 + 39 00 00 00 05 00 02 b1 0a + 39 00 00 00 05 00 02 b0 0d + 39 00 00 00 05 00 02 b1 80 + 39 00 00 00 05 00 02 b0 00 + 39 00 00 00 05 00 02 f7 03 + 39 00 00 00 05 00 02 fe 30 + 39 01 00 00 05 00 02 fe b0]; + qcom,mdss-dsi-h-sync-pulse = <0>; + qcom,mdss-dsi-traffic-mode = "non_burst_sync_event"; + qcom,mdss-dsi-lane-map = "lane_map_0123"; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,mdss-dsi-tx-eot-append; + qcom,dcs-cmd-by-left; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-wr-mem-start = <0x2c>; + qcom,mdss-dsi-wr-mem-continue = <0x3c>; + qcom,mdss-dsi-te-pin-select = <1>; + qcom,mdss-dsi-te-dcs-command = <1>; + qcom,mdss-dsi-te-check-enable; + qcom,mdss-dsi-te-using-te-pin; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + qcom,mdss-dsi-lp11-init; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,mdss-dsi-bl-min-level = <1>; + qcom,mdss-dsi-bl-max-level = <255>; + qcom,mdss-pan-physical-width-dimension = <68>; + qcom,mdss-pan-physical-height-dimension = <122>; + qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sharp-1080p-cmd.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sharp-1080p-cmd.dtsi new file mode 100644 index 000000000000..8ffa0eb7749d --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sharp-1080p-cmd.dtsi @@ -0,0 +1,79 @@ +&mdss_mdp { + dsi_sharp_1080_cmd: qcom,mdss_dsi_sharp_1080p_cmd { + qcom,mdss-dsi-panel-name = "sharp 1080p cmd mode dsi panel"; + qcom,mdss-dsi-panel-controller = <&mdss_dsi0>; + qcom,mdss-dsi-panel-type = "dsi_cmd_mode"; + + qcom,dsi-ctrl-num = <0>; + qcom,dsi-phy-num = <0>; + qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0"; + + qcom,mdss-dsi-panel-destination = "display_1"; + qcom,mdss-dsi-panel-clockrate = <850000000>; + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-bpp = <24>; + qcom,mdss-dsi-underflow-color = <0xff>; + qcom,mdss-dsi-border-color = <0>; + qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>; + qcom,mdss-pan-physical-width-dimension = <64>; + qcom,mdss-pan-physical-height-dimension = <117>; + qcom,mdss-dsi-traffic-mode = "burst_mode"; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_pwm"; + qcom,mdss-dsi-te-pin-select = <1>; + qcom,mdss-dsi-wr-mem-start = <0x2c>; + qcom,mdss-dsi-wr-mem-continue = <0x3c>; + qcom,mdss-dsi-te-dcs-command = <1>; + qcom,mdss-dsi-te-check-enable; + qcom,mdss-dsi-te-using-te-pin; + + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-width = <1080>; + qcom,mdss-dsi-panel-height = <1920>; + qcom,mdss-dsi-h-front-porch = <0>; + qcom,mdss-dsi-h-back-porch = <0>; + qcom,mdss-dsi-h-pulse-width = <0>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <0>; + qcom,mdss-dsi-v-front-porch = <0>; + qcom,mdss-dsi-v-pulse-width = <0>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-on-command = [ + 15 01 00 00 00 00 02 bb 10 + 15 01 00 00 00 00 02 b0 03 + 05 01 00 00 78 00 01 11 + 15 01 00 00 00 00 02 51 ff + 15 01 00 00 00 00 02 53 24 + 15 01 00 00 00 00 02 ff 23 + 15 01 00 00 00 00 02 08 05 + 15 01 00 00 00 00 02 46 90 + 15 01 00 00 00 00 02 ff 10 + 15 01 00 00 00 00 02 ff f0 + 15 01 00 00 00 00 02 92 01 + 15 01 00 00 00 00 02 ff 10 + /* enable TE generation */ + 15 01 00 00 00 00 02 35 00 + 05 01 00 00 28 00 01 29]; + qcom,mdss-dsi-off-command = [ + 05 01 00 00 10 00 01 28 + 05 01 00 00 40 00 01 10]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + qcom,mdss-dsi-h-sync-pulse = <0>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sharp-dsc-4k-cmd.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sharp-dsc-4k-cmd.dtsi new file mode 100644 index 000000000000..89df5ffd4029 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sharp-dsc-4k-cmd.dtsi @@ -0,0 +1,96 @@ +&mdss_mdp { + dsi_sharp_4k_dsc_cmd: qcom,mdss_dsi_sharp_4k_dsc_cmd { + qcom,mdss-dsi-panel-name = "Sharp 4k cmd mode dsc dsi panel"; + qcom,mdss-dsi-panel-type = "dsi_cmd_mode"; + + qcom,dsi-ctrl-num = <0 1>; + qcom,dsi-phy-num = <0 1>; + qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0"; + + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-bpp = <24>; + qcom,mdss-dsi-border-color = <0>; + qcom,mdss-dsi-traffic-mode = "burst_mode"; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + qcom,mdss-dsi-reset-sequence = <1 100>, <0 100>, <1 100>; + qcom,mdss-pan-physical-width-dimension = <71>; + qcom,mdss-pan-physical-height-dimension = <129>; + qcom,mdss-dsi-te-pin-select = <1>; + qcom,mdss-dsi-wr-mem-start = <0x2c>; + qcom,mdss-dsi-wr-mem-continue = <0x3c>; + qcom,mdss-dsi-te-dcs-command = <1>; + qcom,mdss-dsi-te-check-enable; + qcom,mdss-dsi-te-using-te-pin; + qcom,dcs-cmd-by-left; + qcom,mdss-dsi-tx-eot-append; + qcom,adjust-timer-wakeup-ms = <1>; + qcom,mdss-dsi-panel-hdr-enabled; + qcom,mdss-dsi-panel-hdr-color-primaries = <14500 15500 32000 + 17000 15500 30000 8000 3000>; + qcom,mdss-dsi-panel-peak-brightness = <4200000>; + qcom,mdss-dsi-panel-blackness-level = <3230>; + + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-width = <1080>; + qcom,mdss-dsi-panel-height = <3840>; + qcom,mdss-dsi-h-front-porch = <30>; + qcom,mdss-dsi-h-back-porch = <100>; + qcom,mdss-dsi-h-pulse-width = <4>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <7>; + qcom,mdss-dsi-v-front-porch = <8>; + qcom,mdss-dsi-v-pulse-width = <1>; + qcom,mdss-dsi-h-sync-pulse = <0>; + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-panel-jitter = <0x8 0xa>; + + qcom,mdss-dsi-on-command = [ + 39 01 00 00 00 00 11 91 09 20 00 20 02 + 00 03 1c 04 21 00 + 0f 03 19 01 97 + 39 01 00 00 00 00 03 92 10 f0 + 15 01 00 00 00 00 02 90 03 + 15 01 00 00 00 00 02 03 01 + 39 01 00 00 00 00 06 f0 55 aa 52 08 04 + 15 01 00 00 00 00 02 c0 03 + 39 01 00 00 00 00 06 f0 55 aa 52 08 07 + 15 01 00 00 00 00 02 ef 01 + 39 01 00 00 00 00 06 f0 55 aa 52 08 00 + 15 01 00 00 00 00 02 b4 01 + 15 01 00 00 00 00 02 35 00 + 39 01 00 00 00 00 06 f0 55 aa 52 08 01 + 39 01 00 00 00 00 05 ff aa 55 a5 80 + 15 01 00 00 00 00 02 6f 01 + 15 01 00 00 00 00 02 f3 10 + 39 01 00 00 00 00 05 ff aa 55 a5 00 + /* sleep out + delay 120ms */ + 05 01 00 00 78 00 01 11 + /* display on + delay 120ms */ + 05 01 00 00 78 00 01 29 + ]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command = + [05 01 00 00 78 00 02 28 00 + 05 01 00 00 78 00 02 10 00]; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + + qcom,compression-mode = "dsc"; + qcom,mdss-dsc-slice-height = <32>; + qcom,mdss-dsc-slice-width = <1080>; + qcom,mdss-dsc-slice-per-pkt = <1>; + qcom,mdss-dsc-bit-per-component = <8>; + qcom,mdss-dsc-bit-per-pixel = <8>; + qcom,mdss-dsc-block-prediction-enable; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sharp-dsc-4k-video.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sharp-dsc-4k-video.dtsi new file mode 100644 index 000000000000..feb55406288c --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sharp-dsc-4k-video.dtsi @@ -0,0 +1,89 @@ +&mdss_mdp { + dsi_sharp_4k_dsc_video: qcom,mdss_dsi_sharp_4k_dsc_video { + qcom,mdss-dsi-panel-name = "Sharp 4k video mode dsc dsi panel"; + qcom,mdss-dsi-panel-type = "dsi_video_mode"; + + qcom,dsi-ctrl-num = <0 1>; + qcom,dsi-phy-num = <0 1>; + qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0"; + + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-bpp = <24>; + qcom,mdss-dsi-border-color = <0>; + qcom,mdss-dsi-traffic-mode = "burst_mode"; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + qcom,mdss-dsi-reset-sequence = <1 100>, <0 100>, <1 100>; + qcom,mdss-pan-physical-width-dimension = <71>; + qcom,mdss-pan-physical-height-dimension = <129>; + qcom,mdss-dsi-tx-eot-append; + + qcom,adjust-timer-wakeup-ms = <1>; + qcom,mdss-dsi-panel-hdr-enabled; + qcom,mdss-dsi-panel-hdr-color-primaries = <14500 15500 32000 + 17000 15500 30000 8000 3000>; + qcom,mdss-dsi-panel-peak-brightness = <4200000>; + qcom,mdss-dsi-panel-blackness-level = <3230>; + + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-width = <1080>; + qcom,mdss-dsi-panel-height = <3840>; + qcom,mdss-dsi-h-front-porch = <30>; + qcom,mdss-dsi-h-back-porch = <100>; + qcom,mdss-dsi-h-pulse-width = <4>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <7>; + qcom,mdss-dsi-v-front-porch = <8>; + qcom,mdss-dsi-v-pulse-width = <1>; + qcom,mdss-dsi-h-sync-pulse = <0>; + qcom,mdss-dsi-panel-framerate = <60>; + + qcom,mdss-dsi-on-command = [ + 39 01 00 00 00 00 11 91 09 20 00 20 02 + 00 03 1c 04 21 00 + 0f 03 19 01 97 + 39 01 00 00 00 00 03 92 10 f0 + 15 01 00 00 00 00 02 90 03 + 15 01 00 00 00 00 02 03 01 + 39 01 00 00 00 00 06 f0 55 aa 52 08 04 + 15 01 00 00 00 00 02 c0 03 + 39 01 00 00 00 00 06 f0 55 aa 52 08 07 + 15 01 00 00 00 00 02 ef 01 + 39 01 00 00 00 00 06 f0 55 aa 52 08 00 + 15 01 00 00 00 00 02 b4 10 + 15 01 00 00 00 00 02 35 00 + 39 01 00 00 00 00 06 f0 55 aa 52 08 01 + 39 01 00 00 00 00 05 ff aa 55 a5 80 + 15 01 00 00 00 00 02 6f 01 + 15 01 00 00 00 00 02 f3 10 + 39 01 00 00 00 00 05 ff aa 55 a5 00 + /* sleep out + delay 120ms */ + 05 01 00 00 78 00 01 11 + /* display on + delay 120ms */ + 05 01 00 00 78 00 01 29 + ]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command = + [05 01 00 00 78 00 02 28 00 + 05 01 00 00 78 00 02 10 00]; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + + qcom,compression-mode = "dsc"; + qcom,mdss-dsc-slice-height = <32>; + qcom,mdss-dsc-slice-width = <1080>; + qcom,mdss-dsc-slice-per-pkt = <1>; + qcom,mdss-dsc-bit-per-component = <8>; + qcom,mdss-dsc-bit-per-pixel = <8>; + qcom,mdss-dsc-block-prediction-enable; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sharp-dualdsi-wqhd-cmd.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sharp-dualdsi-wqhd-cmd.dtsi new file mode 100644 index 000000000000..c909864db377 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sharp-dualdsi-wqhd-cmd.dtsi @@ -0,0 +1,86 @@ +&mdss_mdp { + dsi_dual_sharp_wqhd_cmd: qcom,mdss_dsi_sharp_wqhd_cmd { + qcom,mdss-dsi-panel-name = + "Dual Sharp WQHD cmd mode dsi panel"; + qcom,mdss-dsi-panel-type = "dsi_cmd_mode"; + + qcom,dsi-ctrl-num = <0 1>; + qcom,dsi-phy-num = <0 1>; + qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0"; + + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-bpp = <24>; + qcom,mdss-dsi-border-color = <0>; + qcom,mdss-dsi-h-sync-pulse = <0>; + qcom,mdss-dsi-traffic-mode = "burst_mode"; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + qcom,mdss-dsi-reset-sequence = <1 20>, <0 20>, <1 20>; + qcom,mdss-dsi-te-pin-select = <1>; + qcom,mdss-dsi-wr-mem-start = <0x2c>; + qcom,mdss-dsi-wr-mem-continue = <0x3c>; + qcom,mdss-dsi-te-dcs-command = <1>; + qcom,mdss-dsi-te-check-enable; + qcom,mdss-dsi-te-using-te-pin; + qcom,dcs-cmd-by-left; + qcom,mdss-dsi-tx-eot-append; + qcom,mdss-pan-physical-width-dimension = <68>; + qcom,mdss-pan-physical-height-dimension = <121>; + + qcom,adjust-timer-wakeup-ms = <1>; + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-width = <720>; + qcom,mdss-dsi-panel-height = <2560>; + qcom,mdss-dsi-h-front-porch = <30>; + qcom,mdss-dsi-h-back-porch = <100>; + qcom,mdss-dsi-h-pulse-width = <4>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <8>; + qcom,mdss-dsi-v-front-porch = <8>; + qcom,mdss-dsi-v-pulse-width = <1>; + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-on-command = [ + 39 01 00 00 00 00 11 91 09 + 20 00 20 02 00 03 1c 04 21 00 + 0f 03 19 01 97 + 39 01 00 00 00 00 03 92 10 f0 + 15 01 00 00 00 00 02 90 03 + 15 01 00 00 00 00 02 03 01 + 39 01 00 00 00 00 06 f0 55 aa 52 08 04 + 15 01 00 00 00 00 02 c0 03 + 39 01 00 00 00 00 06 f0 55 aa 52 08 07 + 15 01 00 00 00 00 02 ef 01 + 39 01 00 00 00 00 06 f0 55 aa 52 08 00 + 15 01 00 00 00 00 02 b4 01 + 15 01 00 00 00 00 02 35 00 + 39 01 00 00 00 00 06 f0 55 aa 52 08 01 + 39 01 00 00 00 00 05 ff aa 55 a5 80 + 15 01 00 00 00 00 02 6f 01 + 15 01 00 00 00 00 02 f3 10 + 39 01 00 00 00 00 05 ff aa 55 a5 00 + 15 01 00 00 00 00 02 90 01 + 15 01 00 00 00 00 02 03 00 + 15 01 00 00 00 00 02 58 01 + 15 01 00 00 00 00 02 c9 00 + 15 01 00 00 00 00 02 c0 15 + /* sleep out + delay 120ms */ + 05 01 00 00 78 00 01 11 + /* display on + delay 120ms */ + 05 01 00 00 78 00 01 29 + ]; + qcom,mdss-dsi-off-command = [05 01 00 00 78 00 + 02 28 00 05 01 00 00 78 00 02 10 00]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sharp-dualdsi-wqhd-video.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sharp-dualdsi-wqhd-video.dtsi new file mode 100644 index 000000000000..37330078b1ff --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sharp-dualdsi-wqhd-video.dtsi @@ -0,0 +1,82 @@ +&mdss_mdp { + dsi_dual_sharp_wqhd_video: qcom,mdss_dsi_sharp_wqhd_video { + qcom,mdss-dsi-panel-name = + "Dual Sharp wqhd video mode dsi panel"; + qcom,mdss-dsi-panel-type = "dsi_video_mode"; + + qcom,dsi-ctrl-num = <0 1>; + qcom,dsi-phy-num = <0 1>; + qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0"; + + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-bpp = <24>; + qcom,mdss-dsi-border-color = <0>; + qcom,mdss-dsi-h-sync-pulse = <0>; + qcom,mdss-dsi-traffic-mode = "burst_mode"; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + qcom,mdss-dsi-reset-sequence = <1 20>, <0 20>, <1 20>; + qcom,mdss-dsi-tx-eot-append; + qcom,mdss-pan-physical-width-dimension = <68>; + qcom,mdss-pan-physical-height-dimension = <121>; + + qcom,adjust-timer-wakeup-ms = <1>; + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-width = <720>; + qcom,mdss-dsi-panel-height = <2560>; + qcom,mdss-dsi-h-front-porch = <30>; + qcom,mdss-dsi-h-back-porch = <100>; + qcom,mdss-dsi-h-pulse-width = <4>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <8>; + qcom,mdss-dsi-v-front-porch = <8>; + qcom,mdss-dsi-v-pulse-width = <1>; + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-on-command = [ + 39 01 00 00 00 00 11 91 09 + 20 00 20 02 00 03 1c 04 21 00 + 0f 03 19 01 97 + 39 01 00 00 00 00 03 92 10 f0 + 15 01 00 00 00 00 02 90 03 + 15 01 00 00 00 00 02 03 01 + 39 01 00 00 00 00 06 f0 55 aa 52 08 04 + 15 01 00 00 00 00 02 c0 03 + 39 01 00 00 00 00 06 f0 55 aa 52 08 07 + 15 01 00 00 00 00 02 ef 01 + 39 01 00 00 00 00 06 f0 55 aa 52 08 00 + 15 01 00 00 00 00 02 b4 10 + 15 01 00 00 00 00 02 35 00 + 39 01 00 00 00 00 06 f0 55 aa 52 08 01 + 39 01 00 00 00 00 05 ff aa 55 a5 80 + 15 01 00 00 00 00 02 6f 01 + 15 01 00 00 00 00 02 f3 10 + 39 01 00 00 00 00 05 ff aa 55 a5 00 + 15 01 00 00 00 00 02 90 01 + 15 01 00 00 00 00 02 03 00 + 15 01 00 00 00 00 02 58 01 + 15 01 00 00 00 00 02 c9 00 + 15 01 00 00 00 00 02 c0 15 + /* sleep out + delay 120ms */ + 05 01 00 00 78 00 01 11 + /* display on + delay 120ms */ + 05 01 00 00 78 00 01 29 + ]; + + qcom,mdss-dsi-off-command = [05 01 00 00 78 00 + 02 28 00 05 01 00 00 78 00 02 10 00]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + + }; + }; + }; +}; + diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sharp-dualmipi-1080p-120hz.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sharp-dualmipi-1080p-120hz.dtsi new file mode 100644 index 000000000000..06a95cadbd58 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sharp-dualmipi-1080p-120hz.dtsi @@ -0,0 +1,626 @@ +&mdss_mdp { + dsi_dual_sharp_1080_120hz_cmd: qcom,mdss_dual_sharp_1080p_120hz_cmd { + qcom,mdss-dsi-panel-name = + "sharp 1080p 120hz dual dsi cmd mode panel"; + qcom,mdss-dsi-panel-type = "dsi_cmd_mode"; + + qcom,dsi-ctrl-num = <0 1>; + qcom,dsi-phy-num = <0 1>; + qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0"; + + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-bpp = <24>; + qcom,mdss-dsi-underflow-color = <0xff>; + qcom,mdss-dsi-border-color = <0>; + qcom,mdss-dsi-reset-sequence = <1 20>, <0 1>, <1 10>; + qcom,mdss-dsi-traffic-mode = "burst_mode"; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,cmd-sync-wait-broadcast; + qcom,cmd-sync-wait-trigger; + qcom,mdss-tear-check-frame-rate = <12000>; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + qcom,mdss-dsi-te-pin-select = <1>; + qcom,mdss-dsi-wr-mem-start = <0x2c>; + qcom,mdss-dsi-wr-mem-continue = <0x3c>; + qcom,mdss-dsi-te-dcs-command = <1>; + qcom,mdss-dsi-te-check-enable; + qcom,mdss-dsi-te-using-te-pin; + + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-width = <540>; + qcom,mdss-dsi-panel-height = <1920>; + qcom,mdss-dsi-h-front-porch = <28>; + qcom,mdss-dsi-h-back-porch = <4>; + qcom,mdss-dsi-h-pulse-width = <4>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <12>; + qcom,mdss-dsi-v-front-porch = <12>; + qcom,mdss-dsi-v-pulse-width = <2>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-panel-framerate = <120>; + qcom,mdss-dsi-on-command = + [15 01 00 00 00 00 02 ff 10 + 15 01 00 00 00 00 02 fb 01 + 15 01 00 00 00 00 02 ba 07 + 15 01 00 00 00 00 02 c0 00 + 15 01 00 00 00 00 02 bb 10 + 15 01 00 00 00 00 02 d9 00 + 15 01 00 00 00 00 02 ef 70 + 15 01 00 00 00 00 02 f7 80 + 39 01 00 00 00 00 06 3b 03 0e 0c 08 1c + 15 01 00 00 00 00 02 e9 0e + 15 01 00 00 00 00 02 ea 0c + 15 01 00 00 00 00 02 35 00 + 15 01 00 00 00 00 02 c0 00 + 15 01 00 00 00 00 02 ff 20 + 15 01 00 00 00 00 02 fb 01 + 15 01 00 00 00 00 02 59 6a + 15 01 00 00 00 00 02 0b 1b + 15 01 00 00 00 00 02 61 f7 + 15 01 00 00 00 00 02 62 6c + 15 01 00 00 00 00 02 00 01 + 15 01 00 00 00 00 02 01 55 + 15 01 00 00 00 00 02 04 c8 + 15 01 00 00 00 00 02 05 1a + 15 01 00 00 00 00 02 0d 93 + 15 01 00 00 00 00 02 0e 93 + 15 01 00 00 00 00 02 0f 7e + 15 01 00 00 00 00 02 06 69 + 15 01 00 00 00 00 02 07 bc + 15 01 00 00 00 00 02 10 03 + 15 01 00 00 00 00 02 11 64 + 15 01 00 00 00 00 02 12 5a + 15 01 00 00 00 00 02 13 40 + 15 01 00 00 00 00 02 14 40 + 15 01 00 00 00 00 02 15 00 + 15 01 00 00 00 00 02 33 13 + 15 01 00 00 00 00 02 5a 40 + 15 01 00 00 00 00 02 5b 40 + 15 01 00 00 00 00 02 5e 80 + 15 01 00 00 00 00 02 ff 24 + 15 01 00 00 00 00 02 fb 01 + 15 01 00 00 00 00 02 00 80 + 15 01 00 00 00 00 02 14 80 + 15 01 00 00 00 00 02 01 80 + 15 01 00 00 00 00 02 15 80 + 15 01 00 00 00 00 02 02 80 + 15 01 00 00 00 00 02 16 80 + 15 01 00 00 00 00 02 03 0a + 15 01 00 00 00 00 02 17 0c + 15 01 00 00 00 00 02 04 06 + 15 01 00 00 00 00 02 18 08 + 15 01 00 00 00 00 02 05 80 + 15 01 00 00 00 00 02 19 80 + 15 01 00 00 00 00 02 06 80 + 15 01 00 00 00 00 02 1a 80 + 15 01 00 00 00 00 02 07 80 + 15 01 00 00 00 00 02 1b 80 + 15 01 00 00 00 00 02 08 80 + 15 01 00 00 00 00 02 1c 80 + 15 01 00 00 00 00 02 09 80 + 15 01 00 00 00 00 02 1d 80 + 15 01 00 00 00 00 02 0a 80 + 15 01 00 00 00 00 02 1e 80 + 15 01 00 00 00 00 02 0b 1a + 15 01 00 00 00 00 02 1f 1b + 15 01 00 00 00 00 02 0c 16 + 15 01 00 00 00 00 02 20 17 + 15 01 00 00 00 00 02 0d 1c + 15 01 00 00 00 00 02 21 1d + 15 01 00 00 00 00 02 0e 18 + 15 01 00 00 00 00 02 22 19 + 15 01 00 00 00 00 02 0f 0e + 15 01 00 00 00 00 02 23 10 + 15 01 00 00 00 00 02 10 80 + 15 01 00 00 00 00 02 24 80 + 15 01 00 00 00 00 02 11 80 + 15 01 00 00 00 00 02 25 80 + 15 01 00 00 00 00 02 12 80 + 15 01 00 00 00 00 02 26 80 + 15 01 00 00 00 00 02 13 80 + 15 01 00 00 00 00 02 27 80 + 15 01 00 00 00 00 02 74 ff + 15 01 00 00 00 00 02 75 ff + 15 01 00 00 00 00 02 8d 00 + 15 01 00 00 00 00 02 8e 00 + 15 01 00 00 00 00 02 8f 9c + 15 01 00 00 00 00 02 90 0c + 15 01 00 00 00 00 02 91 0e + 15 01 00 00 00 00 02 d6 00 + 15 01 00 00 00 00 02 d7 20 + 15 01 00 00 00 00 02 d8 00 + 15 01 00 00 00 00 02 d9 88 + 15 01 00 00 00 00 02 e5 05 + 15 01 00 00 00 00 02 e6 10 + 15 01 00 00 00 00 02 54 06 + 15 01 00 00 00 00 02 55 05 + 15 01 00 00 00 00 02 56 04 + 15 01 00 00 00 00 02 58 03 + 15 01 00 00 00 00 02 59 33 + 15 01 00 00 00 00 02 5a 33 + 15 01 00 00 00 00 02 5b 01 + 15 01 00 00 00 00 02 5c 00 + 15 01 00 00 00 00 02 5d 01 + 15 01 00 00 00 00 02 5e 0a + 15 01 00 00 00 00 02 5f 0a + 15 01 00 00 00 00 02 60 0a + 15 01 00 00 00 00 02 61 0a + 15 01 00 00 00 00 02 62 10 + 15 01 00 00 00 00 02 63 01 + 15 01 00 00 00 00 02 64 00 + 15 01 00 00 00 00 02 65 00 + 15 01 00 00 00 00 02 ef 00 + 15 01 00 00 00 00 02 f0 00 + 15 01 00 00 00 00 02 6d 20 + 15 01 00 00 00 00 02 66 44 + 15 01 00 00 00 00 02 68 01 + 15 01 00 00 00 00 02 69 00 + 15 01 00 00 00 00 02 67 11 + 15 01 00 00 00 00 02 6a 06 + 15 01 00 00 00 00 02 6b 31 + 15 01 00 00 00 00 02 6c 90 + 15 01 00 00 00 00 02 ab c3 + 15 01 00 00 00 00 02 b1 49 + 15 01 00 00 00 00 02 aa 80 + 15 01 00 00 00 00 02 b0 90 + 15 01 00 00 00 00 02 b2 a4 + 15 01 00 00 00 00 02 b3 00 + 15 01 00 00 00 00 02 b4 23 + 15 01 00 00 00 00 02 b5 00 + 15 01 00 00 00 00 02 b6 00 + 15 01 00 00 00 00 02 b7 00 + 15 01 00 00 00 00 02 b8 00 + 15 01 00 00 00 00 02 b9 00 + 15 01 00 00 00 00 02 ba 00 + 15 01 00 00 00 00 02 bb 00 + 15 01 00 00 00 00 02 bc 00 + 15 01 00 00 00 00 02 bd 00 + 15 01 00 00 00 00 02 be 00 + 15 01 00 00 00 00 02 bf 00 + 15 01 00 00 00 00 02 c0 00 + 15 01 00 00 00 00 02 c7 40 + 15 01 00 00 00 00 02 c9 00 + 15 01 00 00 00 00 02 c1 2a + 15 01 00 00 00 00 02 c2 2a + 15 01 00 00 00 00 02 c3 00 + 15 01 00 00 00 00 02 c4 00 + 15 01 00 00 00 00 02 c5 00 + 15 01 00 00 00 00 02 c6 00 + 15 01 00 00 00 00 02 c8 ab + 15 01 00 00 00 00 02 ca 00 + 15 01 00 00 00 00 02 cb 00 + 15 01 00 00 00 00 02 cc 20 + 15 01 00 00 00 00 02 cd 40 + 15 01 00 00 00 00 02 ce a8 + 15 01 00 00 00 00 02 cf a8 + 15 01 00 00 00 00 02 d0 00 + 15 01 00 00 00 00 02 d1 00 + 15 01 00 00 00 00 02 d2 00 + 15 01 00 00 00 00 02 d3 00 + 15 01 00 00 00 00 02 af 01 + 15 01 00 00 00 00 02 a4 1e + 15 01 00 00 00 00 02 95 41 + 15 01 00 00 00 00 02 96 03 + 15 01 00 00 00 00 02 98 00 + 15 01 00 00 00 00 02 9a 9a + 15 01 00 00 00 00 02 9b 03 + 15 01 00 00 00 00 02 9d 80 + 15 01 00 00 00 00 02 ff 26 + 15 01 00 00 00 00 02 fb 01 + 15 01 00 00 00 00 02 fa d0 + 15 01 00 00 00 00 02 6b 80 + 15 01 00 00 00 00 02 6c 5c + 15 01 00 00 00 00 02 6d 0c + 15 01 00 00 00 00 02 6e 0e + 15 01 00 00 00 00 02 58 01 + 15 01 00 00 00 00 02 59 15 + 15 01 00 00 00 00 02 5a 01 + 15 01 00 00 00 00 02 5b 00 + 15 01 00 00 00 00 02 5c 01 + 15 01 00 00 00 00 02 5d 2b + 15 01 00 00 00 00 02 74 00 + 15 01 00 00 00 00 02 75 ba + 15 01 00 00 00 00 02 81 0a + 15 01 00 00 00 00 02 4e 81 + 15 01 00 00 00 00 02 4f 83 + 15 01 00 00 00 00 02 51 00 + 15 01 00 00 00 00 02 53 4d + 15 01 00 00 00 00 02 54 03 + 15 01 00 00 00 00 02 ff e0 + 15 01 00 00 00 00 02 fb 01 + 15 01 00 00 00 00 02 b2 81 + 15 01 00 00 00 00 02 62 28 + 15 01 00 00 00 00 02 a2 09 + 15 01 00 00 00 00 02 b3 01 + 15 01 00 00 00 00 02 ed 00 + 15 01 00 00 00 00 02 ff 10 + 05 01 00 00 78 00 01 11 + 15 01 00 00 00 00 02 ff 20 + 15 01 00 00 00 00 02 75 00 + 15 01 00 00 00 00 02 76 71 + 15 01 00 00 00 00 02 77 00 + 15 01 00 00 00 00 02 78 84 + 15 01 00 00 00 00 02 79 00 + 15 01 00 00 00 00 02 7a a5 + 15 01 00 00 00 00 02 7b 00 + 15 01 00 00 00 00 02 7c bb + 15 01 00 00 00 00 02 7d 00 + 15 01 00 00 00 00 02 7e ce + 15 01 00 00 00 00 02 7f 00 + 15 01 00 00 00 00 02 80 e0 + 15 01 00 00 00 00 02 81 00 + 15 01 00 00 00 00 02 82 ef + 15 01 00 00 00 00 02 83 00 + 15 01 00 00 00 00 02 84 ff + 15 01 00 00 00 00 02 85 01 + 15 01 00 00 00 00 02 86 0b + 15 01 00 00 00 00 02 87 01 + 15 01 00 00 00 00 02 88 38 + 15 01 00 00 00 00 02 89 01 + 15 01 00 00 00 00 02 8a 5b + 15 01 00 00 00 00 02 8b 01 + 15 01 00 00 00 00 02 8c 95 + 15 01 00 00 00 00 02 8d 01 + 15 01 00 00 00 00 02 8e c4 + 15 01 00 00 00 00 02 8f 02 + 15 01 00 00 00 00 02 90 0d + 15 01 00 00 00 00 02 91 02 + 15 01 00 00 00 00 02 92 4a + 15 01 00 00 00 00 02 93 02 + 15 01 00 00 00 00 02 94 4c + 15 01 00 00 00 00 02 95 02 + 15 01 00 00 00 00 02 96 85 + 15 01 00 00 00 00 02 97 02 + 15 01 00 00 00 00 02 98 c3 + 15 01 00 00 00 00 02 99 02 + 15 01 00 00 00 00 02 9a e9 + 15 01 00 00 00 00 02 9b 03 + 15 01 00 00 00 00 02 9c 16 + 15 01 00 00 00 00 02 9d 03 + 15 01 00 00 00 00 02 9e 34 + 15 01 00 00 00 00 02 9f 03 + 15 01 00 00 00 00 02 a0 56 + 15 01 00 00 00 00 02 a2 03 + 15 01 00 00 00 00 02 a3 62 + 15 01 00 00 00 00 02 a4 03 + 15 01 00 00 00 00 02 a5 6c + 15 01 00 00 00 00 02 a6 03 + 15 01 00 00 00 00 02 a7 74 + 15 01 00 00 00 00 02 a9 03 + 15 01 00 00 00 00 02 aa 80 + 15 01 00 00 00 00 02 ab 03 + 15 01 00 00 00 00 02 ac 89 + 15 01 00 00 00 00 02 ad 03 + 15 01 00 00 00 00 02 ae 8b + 15 01 00 00 00 00 02 af 03 + 15 01 00 00 00 00 02 b0 8d + 15 01 00 00 00 00 02 b1 03 + 15 01 00 00 00 00 02 b2 8e + 15 01 00 00 00 00 02 b3 00 + 15 01 00 00 00 00 02 b4 71 + 15 01 00 00 00 00 02 b5 00 + 15 01 00 00 00 00 02 b6 84 + 15 01 00 00 00 00 02 b7 00 + 15 01 00 00 00 00 02 b8 a5 + 15 01 00 00 00 00 02 b9 00 + 15 01 00 00 00 00 02 ba bb + 15 01 00 00 00 00 02 bb 00 + 15 01 00 00 00 00 02 bc ce + 15 01 00 00 00 00 02 bd 00 + 15 01 00 00 00 00 02 be e0 + 15 01 00 00 00 00 02 bf 00 + 15 01 00 00 00 00 02 c0 ef + 15 01 00 00 00 00 02 c1 00 + 15 01 00 00 00 00 02 c2 ff + 15 01 00 00 00 00 02 c3 01 + 15 01 00 00 00 00 02 c4 0b + 15 01 00 00 00 00 02 c5 01 + 15 01 00 00 00 00 02 c6 38 + 15 01 00 00 00 00 02 c7 01 + 15 01 00 00 00 00 02 c8 5b + 15 01 00 00 00 00 02 c9 01 + 15 01 00 00 00 00 02 ca 95 + 15 01 00 00 00 00 02 cb 01 + 15 01 00 00 00 00 02 cc c4 + 15 01 00 00 00 00 02 cd 02 + 15 01 00 00 00 00 02 ce 0d + 15 01 00 00 00 00 02 cf 02 + 15 01 00 00 00 00 02 d0 4a + 15 01 00 00 00 00 02 d1 02 + 15 01 00 00 00 00 02 d2 4c + 15 01 00 00 00 00 02 d3 02 + 15 01 00 00 00 00 02 d4 85 + 15 01 00 00 00 00 02 d5 02 + 15 01 00 00 00 00 02 d6 c3 + 15 01 00 00 00 00 02 d7 02 + 15 01 00 00 00 00 02 d8 e9 + 15 01 00 00 00 00 02 d9 03 + 15 01 00 00 00 00 02 da 16 + 15 01 00 00 00 00 02 db 03 + 15 01 00 00 00 00 02 dc 34 + 15 01 00 00 00 00 02 dd 03 + 15 01 00 00 00 00 02 de 56 + 15 01 00 00 00 00 02 df 03 + 15 01 00 00 00 00 02 e0 62 + 15 01 00 00 00 00 02 e1 03 + 15 01 00 00 00 00 02 e2 6c + 15 01 00 00 00 00 02 e3 03 + 15 01 00 00 00 00 02 e4 74 + 15 01 00 00 00 00 02 e5 03 + 15 01 00 00 00 00 02 e6 80 + 15 01 00 00 00 00 02 e7 03 + 15 01 00 00 00 00 02 e8 89 + 15 01 00 00 00 00 02 e9 03 + 15 01 00 00 00 00 02 ea 8b + 15 01 00 00 00 00 02 eb 03 + 15 01 00 00 00 00 02 ec 8d + 15 01 00 00 00 00 02 ed 03 + 15 01 00 00 00 00 02 ee 8e + 15 01 00 00 00 00 02 ef 00 + 15 01 00 00 00 00 02 f0 71 + 15 01 00 00 00 00 02 f1 00 + 15 01 00 00 00 00 02 f2 84 + 15 01 00 00 00 00 02 f3 00 + 15 01 00 00 00 00 02 f4 a5 + 15 01 00 00 00 00 02 f5 00 + 15 01 00 00 00 00 02 f6 bb + 15 01 00 00 00 00 02 f7 00 + 15 01 00 00 00 00 02 f8 ce + 15 01 00 00 00 00 02 f9 00 + 15 01 00 00 00 00 02 fa e0 + 15 01 00 00 00 00 02 ff 21 + 15 01 00 00 00 00 02 fb 01 + 15 01 00 00 00 00 02 00 00 + 15 01 00 00 00 00 02 01 ef + 15 01 00 00 00 00 02 02 00 + 15 01 00 00 00 00 02 03 ff + 15 01 00 00 00 00 02 04 01 + 15 01 00 00 00 00 02 05 0b + 15 01 00 00 00 00 02 06 01 + 15 01 00 00 00 00 02 07 38 + 15 01 00 00 00 00 02 08 01 + 15 01 00 00 00 00 02 09 5b + 15 01 00 00 00 00 02 0a 01 + 15 01 00 00 00 00 02 0b 95 + 15 01 00 00 00 00 02 0c 01 + 15 01 00 00 00 00 02 0d c4 + 15 01 00 00 00 00 02 0e 02 + 15 01 00 00 00 00 02 0f 0d + 15 01 00 00 00 00 02 10 02 + 15 01 00 00 00 00 02 11 4a + 15 01 00 00 00 00 02 12 02 + 15 01 00 00 00 00 02 13 4c + 15 01 00 00 00 00 02 14 02 + 15 01 00 00 00 00 02 15 85 + 15 01 00 00 00 00 02 16 02 + 15 01 00 00 00 00 02 17 c3 + 15 01 00 00 00 00 02 18 02 + 15 01 00 00 00 00 02 19 e9 + 15 01 00 00 00 00 02 1a 03 + 15 01 00 00 00 00 02 1b 16 + 15 01 00 00 00 00 02 1c 03 + 15 01 00 00 00 00 02 1d 34 + 15 01 00 00 00 00 02 1e 03 + 15 01 00 00 00 00 02 1f 56 + 15 01 00 00 00 00 02 20 03 + 15 01 00 00 00 00 02 21 62 + 15 01 00 00 00 00 02 22 03 + 15 01 00 00 00 00 02 23 6c + 15 01 00 00 00 00 02 24 03 + 15 01 00 00 00 00 02 25 74 + 15 01 00 00 00 00 02 26 03 + 15 01 00 00 00 00 02 27 80 + 15 01 00 00 00 00 02 28 03 + 15 01 00 00 00 00 02 29 89 + 15 01 00 00 00 00 02 2a 03 + 15 01 00 00 00 00 02 2b 8b + 15 01 00 00 00 00 02 2d 03 + 15 01 00 00 00 00 02 2f 8d + 15 01 00 00 00 00 02 30 03 + 15 01 00 00 00 00 02 31 8e + 15 01 00 00 00 00 02 32 00 + 15 01 00 00 00 00 02 33 71 + 15 01 00 00 00 00 02 34 00 + 15 01 00 00 00 00 02 35 84 + 15 01 00 00 00 00 02 36 00 + 15 01 00 00 00 00 02 37 a5 + 15 01 00 00 00 00 02 38 00 + 15 01 00 00 00 00 02 39 bb + 15 01 00 00 00 00 02 3a 00 + 15 01 00 00 00 00 02 3b ce + 15 01 00 00 00 00 02 3d 00 + 15 01 00 00 00 00 02 3f e0 + 15 01 00 00 00 00 02 40 00 + 15 01 00 00 00 00 02 41 ef + 15 01 00 00 00 00 02 42 00 + 15 01 00 00 00 00 02 43 ff + 15 01 00 00 00 00 02 44 01 + 15 01 00 00 00 00 02 45 0b + 15 01 00 00 00 00 02 46 01 + 15 01 00 00 00 00 02 47 38 + 15 01 00 00 00 00 02 48 01 + 15 01 00 00 00 00 02 49 5b + 15 01 00 00 00 00 02 4a 01 + 15 01 00 00 00 00 02 4b 95 + 15 01 00 00 00 00 02 4c 01 + 15 01 00 00 00 00 02 4d c4 + 15 01 00 00 00 00 02 4e 02 + 15 01 00 00 00 00 02 4f 0d + 15 01 00 00 00 00 02 50 02 + 15 01 00 00 00 00 02 51 4a + 15 01 00 00 00 00 02 52 02 + 15 01 00 00 00 00 02 53 4c + 15 01 00 00 00 00 02 54 02 + 15 01 00 00 00 00 02 55 85 + 15 01 00 00 00 00 02 56 02 + 15 01 00 00 00 00 02 58 c3 + 15 01 00 00 00 00 02 59 02 + 15 01 00 00 00 00 02 5a e9 + 15 01 00 00 00 00 02 5b 03 + 15 01 00 00 00 00 02 5c 16 + 15 01 00 00 00 00 02 5d 03 + 15 01 00 00 00 00 02 5e 34 + 15 01 00 00 00 00 02 5f 03 + 15 01 00 00 00 00 02 60 56 + 15 01 00 00 00 00 02 61 03 + 15 01 00 00 00 00 02 62 62 + 15 01 00 00 00 00 02 63 03 + 15 01 00 00 00 00 02 64 6c + 15 01 00 00 00 00 02 65 03 + 15 01 00 00 00 00 02 66 74 + 15 01 00 00 00 00 02 67 03 + 15 01 00 00 00 00 02 68 80 + 15 01 00 00 00 00 02 69 03 + 15 01 00 00 00 00 02 6a 89 + 15 01 00 00 00 00 02 6b 03 + 15 01 00 00 00 00 02 6c 8b + 15 01 00 00 00 00 02 6d 03 + 15 01 00 00 00 00 02 6e 8d + 15 01 00 00 00 00 02 6f 03 + 15 01 00 00 00 00 02 70 8e + 15 01 00 00 00 00 02 71 00 + 15 01 00 00 00 00 02 72 71 + 15 01 00 00 00 00 02 73 00 + 15 01 00 00 00 00 02 74 84 + 15 01 00 00 00 00 02 75 00 + 15 01 00 00 00 00 02 76 a5 + 15 01 00 00 00 00 02 77 00 + 15 01 00 00 00 00 02 78 bb + 15 01 00 00 00 00 02 79 00 + 15 01 00 00 00 00 02 7a ce + 15 01 00 00 00 00 02 7b 00 + 15 01 00 00 00 00 02 7c e0 + 15 01 00 00 00 00 02 7d 00 + 15 01 00 00 00 00 02 7e ef + 15 01 00 00 00 00 02 7f 00 + 15 01 00 00 00 00 02 80 ff + 15 01 00 00 00 00 02 81 01 + 15 01 00 00 00 00 02 82 0b + 15 01 00 00 00 00 02 83 01 + 15 01 00 00 00 00 02 84 38 + 15 01 00 00 00 00 02 85 01 + 15 01 00 00 00 00 02 86 5b + 15 01 00 00 00 00 02 87 01 + 15 01 00 00 00 00 02 88 95 + 15 01 00 00 00 00 02 89 01 + 15 01 00 00 00 00 02 8a c4 + 15 01 00 00 00 00 02 8b 02 + 15 01 00 00 00 00 02 8c 0d + 15 01 00 00 00 00 02 8d 02 + 15 01 00 00 00 00 02 8e 4a + 15 01 00 00 00 00 02 8f 02 + 15 01 00 00 00 00 02 90 4c + 15 01 00 00 00 00 02 91 02 + 15 01 00 00 00 00 02 92 85 + 15 01 00 00 00 00 02 93 02 + 15 01 00 00 00 00 02 94 c3 + 15 01 00 00 00 00 02 95 02 + 15 01 00 00 00 00 02 96 e9 + 15 01 00 00 00 00 02 97 03 + 15 01 00 00 00 00 02 98 16 + 15 01 00 00 00 00 02 99 03 + 15 01 00 00 00 00 02 9a 34 + 15 01 00 00 00 00 02 9b 03 + 15 01 00 00 00 00 02 9c 56 + 15 01 00 00 00 00 02 9d 03 + 15 01 00 00 00 00 02 9e 62 + 15 01 00 00 00 00 02 9f 03 + 15 01 00 00 00 00 02 a0 6c + 15 01 00 00 00 00 02 a2 03 + 15 01 00 00 00 00 02 a3 74 + 15 01 00 00 00 00 02 a4 03 + 15 01 00 00 00 00 02 a5 80 + 15 01 00 00 00 00 02 a6 03 + 15 01 00 00 00 00 02 a7 89 + 15 01 00 00 00 00 02 a9 03 + 15 01 00 00 00 00 02 aa 8b + 15 01 00 00 00 00 02 ab 03 + 15 01 00 00 00 00 02 ac 8d + 15 01 00 00 00 00 02 ad 03 + 15 01 00 00 00 00 02 ae 8e + 15 01 00 00 00 00 02 af 00 + 15 01 00 00 00 00 02 b0 71 + 15 01 00 00 00 00 02 b1 00 + 15 01 00 00 00 00 02 b2 84 + 15 01 00 00 00 00 02 b3 00 + 15 01 00 00 00 00 02 b4 a5 + 15 01 00 00 00 00 02 b5 00 + 15 01 00 00 00 00 02 b6 bb + 15 01 00 00 00 00 02 b7 00 + 15 01 00 00 00 00 02 b8 ce + 15 01 00 00 00 00 02 b9 00 + 15 01 00 00 00 00 02 ba e0 + 15 01 00 00 00 00 02 bb 00 + 15 01 00 00 00 00 02 bc ef + 15 01 00 00 00 00 02 bd 00 + 15 01 00 00 00 00 02 be ff + 15 01 00 00 00 00 02 bf 01 + 15 01 00 00 00 00 02 c0 0b + 15 01 00 00 00 00 02 c1 01 + 15 01 00 00 00 00 02 c2 38 + 15 01 00 00 00 00 02 c3 01 + 15 01 00 00 00 00 02 c4 5b + 15 01 00 00 00 00 02 c5 01 + 15 01 00 00 00 00 02 c6 95 + 15 01 00 00 00 00 02 c7 01 + 15 01 00 00 00 00 02 c8 c4 + 15 01 00 00 00 00 02 c9 02 + 15 01 00 00 00 00 02 ca 0d + 15 01 00 00 00 00 02 cb 02 + 15 01 00 00 00 00 02 cc 4a + 15 01 00 00 00 00 02 cd 02 + 15 01 00 00 00 00 02 ce 4c + 15 01 00 00 00 00 02 cf 02 + 15 01 00 00 00 00 02 d0 85 + 15 01 00 00 00 00 02 d1 02 + 15 01 00 00 00 00 02 d2 c3 + 15 01 00 00 00 00 02 d3 02 + 15 01 00 00 00 00 02 d4 e9 + 15 01 00 00 00 00 02 d5 03 + 15 01 00 00 00 00 02 d6 16 + 15 01 00 00 00 00 02 d7 03 + 15 01 00 00 00 00 02 d8 34 + 15 01 00 00 00 00 02 d9 03 + 15 01 00 00 00 00 02 da 56 + 15 01 00 00 00 00 02 db 03 + 15 01 00 00 00 00 02 dc 62 + 15 01 00 00 00 00 02 dd 03 + 15 01 00 00 00 00 02 de 6c + 15 01 00 00 00 00 02 df 03 + 15 01 00 00 00 00 02 e0 74 + 15 01 00 00 00 00 02 e1 03 + 15 01 00 00 00 00 02 e2 80 + 15 01 00 00 00 00 02 e3 03 + 15 01 00 00 00 00 02 e4 89 + 15 01 00 00 00 00 02 e5 03 + 15 01 00 00 00 00 02 e6 8b + 15 01 00 00 00 00 02 e7 03 + 15 01 00 00 00 00 02 e8 8d + 15 01 00 00 00 00 02 e9 03 + 15 01 00 00 00 00 02 ea 8e + 15 01 00 00 00 00 02 FF 10 + 05 01 00 00 00 00 01 29]; + qcom,mdss-dsi-off-command = + [15 01 00 00 00 00 02 ff 10 + 05 01 00 00 10 00 01 28 + 15 01 00 00 00 00 02 b0 00 + 05 01 00 00 40 00 01 10 + 15 01 00 00 00 00 02 4f 01]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + qcom,mdss-dsi-h-sync-pulse = <0>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sim-cmd.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sim-cmd.dtsi new file mode 100644 index 000000000000..f62ce3b9d7b5 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sim-cmd.dtsi @@ -0,0 +1,347 @@ +&mdss_mdp { + dsi_sim_cmd: qcom,mdss_dsi_sim_cmd { + qcom,mdss-dsi-panel-name = "Simulator cmd mode dsi panel"; + qcom,mdss-dsi-panel-type = "dsi_cmd_mode"; + + qcom,dsi-ctrl-num = <0>; + qcom,dsi-phy-num = <0>; + qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0"; + + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-bpp = <24>; + qcom,mdss-dsi-color-order = "rgb_swap_rgb"; + qcom,mdss-dsi-underflow-color = <0xff>; + qcom,mdss-dsi-border-color = <0>; + qcom,mdss-dsi-panel-mode-switch; + qcom,mdss-dsi-traffic-mode = "non_burst_sync_event"; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>; + qcom,mdss-dsi-t-clk-post = <0x03>; + qcom,mdss-dsi-t-clk-pre = <0x27>; + qcom,mdss-dsi-bl-max-level = <4095>; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + qcom,mdss-dsi-te-pin-select = <1>; + qcom,mdss-dsi-wr-mem-start = <0x2c>; + qcom,mdss-dsi-wr-mem-continue = <0x3c>; + qcom,mdss-dsi-te-dcs-command = <1>; + qcom,mdss-dsi-te-check-enable; + qcom,mdss-dsi-te-using-wd; + qcom,mdss-dsi-te-using-te-pin; + qcom,mdss-dsi-panel-hdr-enabled; + qcom,mdss-dsi-panel-hdr-color-primaries = <14500 15500 32000 + 17000 15500 30000 8000 3000>; + qcom,mdss-dsi-panel-peak-brightness = <4200000>; + qcom,mdss-dsi-panel-blackness-level = <3230>; + qcom,panel-ack-disabled; + + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-width = <1440>; + qcom,mdss-dsi-panel-height = <2560>; + qcom,mdss-dsi-h-front-porch = <120>; + qcom,mdss-dsi-h-back-porch = <100>; + qcom,mdss-dsi-h-pulse-width = <40>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <100>; + qcom,mdss-dsi-v-front-porch = <100>; + qcom,mdss-dsi-v-pulse-width = <40>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-cmd-mode; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-panel-timings = + [00 21 09 09 24 23 08 08 08 03 04 00]; + qcom,mdss-dsi-on-command = + [29 01 00 00 00 00 02 b0 03 + 05 01 00 00 0a 00 01 00 + /* Soft reset, wait 10ms */ + 15 01 00 00 0a 00 02 3a 77 + /* Set Pixel format (24 bpp) */ + 39 01 00 00 0a 00 05 2a 00 00 04 ff + /* Set Column address */ + 39 01 00 00 0a 00 05 2b 00 00 05 9f + /* Set page address */ + 15 01 00 00 0a 00 02 35 00 + /* Set tear on */ + 39 01 00 00 0a 00 03 44 00 00 + /* Set tear scan line */ + 15 01 00 00 0a 00 02 51 ff + /* write display brightness */ + 15 01 00 00 0a 00 02 53 24 + /* write control brightness */ + 15 01 00 00 0a 00 02 55 00 + /* CABC brightness */ + 05 01 00 00 78 00 01 11 + /* exit sleep mode, wait 120ms */ + 05 01 00 00 10 00 01 29]; + + /* Set display on, wait 16ms */ + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command = + [05 01 00 00 32 00 02 28 00 + 05 01 00 00 78 00 02 10 00]; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + qcom,cmd-to-video-mode-switch-commands = [ + 39 01 00 00 00 00 03 b0 a5 00 + 07 01 00 00 00 00 02 01 00 + 39 01 00 00 00 00 06 b2 00 5d 04 80 49 + 15 01 00 00 00 00 02 3d 10 + 15 01 00 00 00 00 02 36 00 + 15 01 00 00 00 00 02 55 0c + ]; + qcom,cmd-to-video-mode-switch-commands-state = + "dsi_lp_mode"; + qcom,compression-mode = "dsc"; + qcom,mdss-dsc-slice-height = <40>; + qcom,mdss-dsc-slice-width = <720>; + qcom,mdss-dsc-slice-per-pkt = <1>; + qcom,mdss-dsc-bit-per-component = <8>; + qcom,mdss-dsc-bit-per-pixel = <8>; + qcom,mdss-dsc-block-prediction-enable; + }; + + timing@1 { + qcom,mdss-dsi-panel-width = <1440>; + qcom,mdss-dsi-panel-height = <2560>; + qcom,mdss-dsi-h-front-porch = <120>; + qcom,mdss-dsi-h-back-porch = <100>; + qcom,mdss-dsi-h-pulse-width = <40>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <100>; + qcom,mdss-dsi-v-front-porch = <100>; + qcom,mdss-dsi-v-pulse-width = <40>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-video-mode; + qcom,mdss-dsi-panel-timings = + [00 21 09 09 24 23 08 08 08 03 04 00]; + qcom,mdss-dsi-on-command = + [29 01 00 00 00 00 02 b0 03 + 05 01 00 00 0a 00 01 00 + /* Soft reset, wait 10ms */ + 15 01 00 00 0a 00 02 3a 77 + /* Set Pixel format (24 bpp) */ + 39 01 00 00 0a 00 05 2a 00 00 04 ff + /* Set Column address */ + 39 01 00 00 0a 00 05 2b 00 00 05 9f + /* Set page address */ + 15 01 00 00 0a 00 02 35 00 + /* Set tear on */ + 39 01 00 00 0a 00 03 44 00 00 + /* Set tear scan line */ + 15 01 00 00 0a 00 02 51 ff + /* write display brightness */ + 15 01 00 00 0a 00 02 53 24 + /* write control brightness */ + 15 01 00 00 0a 00 02 55 00 + /* CABC brightness */ + 05 01 00 00 78 00 01 11 + /* exit sleep mode, wait 120ms */ + 05 01 00 00 10 00 01 29]; + /* Set display on, wait 16ms */ + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command = + [05 01 00 00 32 00 02 28 00 + 05 01 00 00 78 00 02 10 00]; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + qcom,video-to-cmd-mode-switch-commands = [ + 39 01 00 00 00 00 03 b0 a5 00 + 07 01 00 00 00 00 02 01 00 + 39 01 00 00 00 00 06 b2 00 5d 04 80 49 + 15 01 00 00 00 00 02 3d 11 + 15 01 00 00 00 00 02 36 00 + 15 01 00 00 00 00 02 55 0b + ]; + qcom,video-to-cmd-mode-switch-commands-state = + "dsi_lp_mode"; + qcom,compression-mode = "dsc"; + qcom,mdss-dsc-slice-height = <40>; + qcom,mdss-dsc-slice-width = <720>; + qcom,mdss-dsc-slice-per-pkt = <1>; + qcom,mdss-dsc-bit-per-component = <8>; + qcom,mdss-dsc-bit-per-pixel = <8>; + qcom,mdss-dsc-block-prediction-enable; + }; + + timing@2 { + qcom,mdss-dsi-panel-width = <1440>; + qcom,mdss-dsi-panel-height = <2560>; + qcom,mdss-dsi-h-front-porch = <120>; + qcom,mdss-dsi-h-back-porch = <100>; + qcom,mdss-dsi-h-pulse-width = <40>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <100>; + qcom,mdss-dsi-v-front-porch = <100>; + qcom,mdss-dsi-v-pulse-width = <40>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-panel-timings = + [00 21 09 09 24 23 08 08 08 03 04 00]; + qcom,mdss-dsi-on-command = + [29 01 00 00 00 00 02 b0 03 + 05 01 00 00 0a 00 01 00 + /* Soft reset, wait 10ms */ + 15 01 00 00 0a 00 02 3a 77 + /* Set Pixel format (24 bpp) */ + 39 01 00 00 0a 00 05 2a 00 00 04 ff + /* Set Column address */ + 39 01 00 00 0a 00 05 2b 00 00 05 9f + /* Set page address */ + 15 01 00 00 0a 00 02 35 00 + /* Set tear on */ + 39 01 00 00 0a 00 03 44 00 00 + /* Set tear scan line */ + 15 01 00 00 0a 00 02 51 ff + /* write display brightness */ + 15 01 00 00 0a 00 02 53 24 + /* write control brightness */ + 15 01 00 00 0a 00 02 55 00 + /* CABC brightness */ + 05 01 00 00 78 00 01 11 + /* exit sleep mode, wait 120ms */ + 05 01 00 00 10 00 01 29]; + /* Set display on, wait 16ms */ + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command = + [05 01 00 00 32 00 02 28 00 + 05 01 00 00 78 00 02 10 00]; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + + qcom,compression-mode = "dsc"; + qcom,mdss-dsc-slice-height = <40>; + qcom,mdss-dsc-slice-width = <720>; + qcom,mdss-dsc-slice-per-pkt = <1>; + qcom,mdss-dsc-bit-per-component = <8>; + qcom,mdss-dsc-bit-per-pixel = <8>; + qcom,mdss-dsc-block-prediction-enable; + }; + + timing@3 { + qcom,mdss-dsi-panel-width = <1080>; + qcom,mdss-dsi-panel-height = <1920>; + qcom,mdss-dsi-h-front-porch = <120>; + qcom,mdss-dsi-h-back-porch = <460>; + qcom,mdss-dsi-h-pulse-width = <40>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <100>; + qcom,mdss-dsi-v-front-porch = <740>; + qcom,mdss-dsi-v-pulse-width = <40>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-panel-timings = + [00 21 09 09 24 23 08 08 08 03 04 00]; + qcom,mdss-dsi-on-command = + [29 01 00 00 00 00 02 b0 03 + 05 01 00 00 0a 00 01 00 + /* Soft reset, wait 10ms */ + 15 01 00 00 0a 00 02 3a 77 + /* Set Pixel format (24 bpp) */ + 39 01 00 00 0a 00 05 2a 00 00 04 ff + /* Set Column address */ + 39 01 00 00 0a 00 05 2b 00 00 05 9f + /* Set page address */ + 15 01 00 00 0a 00 02 35 00 + /* Set tear on */ + 39 01 00 00 0a 00 03 44 00 00 + /* Set tear scan line */ + 15 01 00 00 0a 00 02 51 ff + /* write display brightness */ + 15 01 00 00 0a 00 02 53 24 + /* write control brightness */ + 15 01 00 00 0a 00 02 55 00 + /* CABC brightness */ + 05 01 00 00 78 00 01 11 + /* exit sleep mode, wait 120ms */ + 05 01 00 00 10 00 01 29]; + /* Set display on, wait 16ms */ + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command = + [05 01 00 00 32 00 02 28 00 + 05 01 00 00 78 00 02 10 00]; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + + qcom,compression-mode = "dsc"; + qcom,mdss-dsc-slice-height = <40>; + qcom,mdss-dsc-slice-width = <540>; + qcom,mdss-dsc-slice-per-pkt = <1>; + qcom,mdss-dsc-bit-per-component = <8>; + qcom,mdss-dsc-bit-per-pixel = <8>; + qcom,mdss-dsc-block-prediction-enable; + }; + + timing@4 { + qcom,mdss-dsi-panel-width = <720>; + qcom,mdss-dsi-panel-height = <1280>; + qcom,mdss-dsi-h-front-porch = <100>; + qcom,mdss-dsi-h-back-porch = <840>; + qcom,mdss-dsi-h-pulse-width = <40>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <100>; + qcom,mdss-dsi-v-front-porch = <1380>; + qcom,mdss-dsi-v-pulse-width = <40>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-panel-timings = + [00 21 09 09 24 23 08 08 08 03 04 00]; + qcom,mdss-dsi-on-command = + [29 01 00 00 00 00 02 b0 03 + 05 01 00 00 0a 00 01 00 + /* Soft reset, wait 10ms */ + 15 01 00 00 0a 00 02 3a 77 + /* Set Pixel format (24 bpp) */ + 39 01 00 00 0a 00 05 2a 00 00 04 ff + /* Set Column address */ + 39 01 00 00 0a 00 05 2b 00 00 05 9f + /* Set page address */ + 15 01 00 00 0a 00 02 35 00 + /* Set tear on */ + 39 01 00 00 0a 00 03 44 00 00 + /* Set tear scan line */ + 15 01 00 00 0a 00 02 51 ff + /* write display brightness */ + 15 01 00 00 0a 00 02 53 24 + /* write control brightness */ + 15 01 00 00 0a 00 02 55 00 + /* CABC brightness */ + 05 01 00 00 78 00 01 11 + /* exit sleep mode, wait 120ms */ + 05 01 00 00 10 00 01 29]; + /* Set display on, wait 16ms */ + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command = + [05 01 00 00 32 00 02 28 00 + 05 01 00 00 78 00 02 10 00]; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + + qcom,compression-mode = "dsc"; + qcom,mdss-dsc-slice-height = <40>; + qcom,mdss-dsc-slice-width = <360>; + qcom,mdss-dsc-slice-per-pkt = <1>; + qcom,mdss-dsc-bit-per-component = <8>; + qcom,mdss-dsc-bit-per-pixel = <8>; + qcom,mdss-dsc-block-prediction-enable; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sim-dsc-10bit-cmd.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sim-dsc-10bit-cmd.dtsi new file mode 100644 index 000000000000..310ce40cd902 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sim-dsc-10bit-cmd.dtsi @@ -0,0 +1,474 @@ +&mdss_mdp { + dsi_sim_dsc_10b_cmd: qcom,mdss_dsi_sim_dsc_10b_cmd { + qcom,mdss-dsi-panel-name = + "Simulator cmd mode DSC3:1 10bit dsi panel"; + qcom,mdss-dsi-panel-type = "dsi_cmd_mode"; + + qcom,dsi-ctrl-num = <0>; + qcom,dsi-phy-num = <0>; + qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0"; + + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-bpp = <30>; + qcom,mdss-dsi-color-order = "rgb_swap_rgb"; + qcom,mdss-dsi-underflow-color = <0xff>; + qcom,mdss-dsi-border-color = <0>; + qcom,mdss-dsi-traffic-mode = "non_burst_sync_event"; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>; + qcom,mdss-dsi-bl-max-level = <4095>; + qcom,adjust-timer-wakeup-ms = <1>; + qcom,mdss-dsi-te-pin-select = <1>; + qcom,mdss-dsi-wr-mem-start = <0x2c>; + qcom,mdss-dsi-wr-mem-continue = <0x3c>; + qcom,mdss-dsi-te-dcs-command = <1>; + qcom,mdss-dsi-te-check-enable; + qcom,mdss-dsi-te-using-wd; + qcom,mdss-dsi-te-using-te-pin; + qcom,panel-ack-disabled; + + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-panel-width = <1440>; + qcom,mdss-dsi-panel-height = <2560>; + qcom,mdss-dsi-h-front-porch = <100>; + qcom,mdss-dsi-h-back-porch = <32>; + qcom,mdss-dsi-h-pulse-width = <16>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <8>; + qcom,mdss-dsi-v-front-porch = <10>; + qcom,mdss-dsi-v-pulse-width = <2>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-on-command = [ + /* CMD2_P0 */ + 15 01 00 00 00 00 02 ff 20 + 15 01 00 00 00 00 02 fb 01 + 15 01 00 00 00 00 02 00 01 + 15 01 00 00 00 00 02 01 55 + 15 01 00 00 00 00 02 02 45 + 15 01 00 00 00 00 02 05 40 + 15 01 00 00 00 00 02 06 19 + 15 01 00 00 00 00 02 07 1e + 15 01 00 00 00 00 02 0b 73 + 15 01 00 00 00 00 02 0c 73 + 15 01 00 00 00 00 02 0e b0 + 15 01 00 00 00 00 02 0f aE + 15 01 00 00 00 00 02 11 b8 + 15 01 00 00 00 00 02 13 00 + 15 01 00 00 00 00 02 58 80 + 15 01 00 00 00 00 02 59 01 + 15 01 00 00 00 00 02 5a 00 + 15 01 00 00 00 00 02 5b 01 + 15 01 00 00 00 00 02 5c 80 + 15 01 00 00 00 00 02 5d 81 + 15 01 00 00 00 00 02 5e 00 + 15 01 00 00 00 00 02 5f 01 + 15 01 00 00 00 00 02 72 31 + 15 01 00 00 00 00 02 68 03 + /* CMD2_P4 */ + 15 01 00 00 00 00 02 ff 24 + 15 01 00 00 00 00 02 fb 01 + 15 01 00 00 00 00 02 00 1c + 15 01 00 00 00 00 02 01 0b + 15 01 00 00 00 00 02 02 0c + 15 01 00 00 00 00 02 03 01 + 15 01 00 00 00 00 02 04 0f + 15 01 00 00 00 00 02 05 10 + 15 01 00 00 00 00 02 06 10 + 15 01 00 00 00 00 02 07 10 + 15 01 00 00 00 00 02 08 89 + 15 01 00 00 00 00 02 09 8a + 15 01 00 00 00 00 02 0a 13 + 15 01 00 00 00 00 02 0b 13 + 15 01 00 00 00 00 02 0c 15 + 15 01 00 00 00 00 02 0d 15 + 15 01 00 00 00 00 02 0e 17 + 15 01 00 00 00 00 02 0f 17 + 15 01 00 00 00 00 02 10 1c + 15 01 00 00 00 00 02 11 0b + 15 01 00 00 00 00 02 12 0c + 15 01 00 00 00 00 02 13 01 + 15 01 00 00 00 00 02 14 0f + 15 01 00 00 00 00 02 15 10 + 15 01 00 00 00 00 02 16 10 + 15 01 00 00 00 00 02 17 10 + 15 01 00 00 00 00 02 18 89 + 15 01 00 00 00 00 02 19 8a + 15 01 00 00 00 00 02 1a 13 + 15 01 00 00 00 00 02 1b 13 + 15 01 00 00 00 00 02 1c 15 + 15 01 00 00 00 00 02 1d 15 + 15 01 00 00 00 00 02 1e 17 + 15 01 00 00 00 00 02 1f 17 + /* STV */ + 15 01 00 00 00 00 02 20 40 + 15 01 00 00 00 00 02 21 01 + 15 01 00 00 00 00 02 22 00 + 15 01 00 00 00 00 02 23 40 + 15 01 00 00 00 00 02 24 40 + 15 01 00 00 00 00 02 25 6d + 15 01 00 00 00 00 02 26 40 + 15 01 00 00 00 00 02 27 40 + /* Vend */ + 15 01 00 00 00 00 02 e0 00 + 15 01 00 00 00 00 02 dc 21 + 15 01 00 00 00 00 02 dd 22 + 15 01 00 00 00 00 02 de 07 + 15 01 00 00 00 00 02 df 07 + 15 01 00 00 00 00 02 e3 6d + 15 01 00 00 00 00 02 e1 07 + 15 01 00 00 00 00 02 e2 07 + /* UD */ + 15 01 00 00 00 00 02 29 d8 + 15 01 00 00 00 00 02 2a 2a + /* CLK */ + 15 01 00 00 00 00 02 4b 03 + 15 01 00 00 00 00 02 4c 11 + 15 01 00 00 00 00 02 4d 10 + 15 01 00 00 00 00 02 4e 01 + 15 01 00 00 00 00 02 4f 01 + 15 01 00 00 00 00 02 50 10 + 15 01 00 00 00 00 02 51 00 + 15 01 00 00 00 00 02 52 80 + 15 01 00 00 00 00 02 53 00 + 15 01 00 00 00 00 02 56 00 + 15 01 00 00 00 00 02 54 07 + 15 01 00 00 00 00 02 58 07 + 15 01 00 00 00 00 02 55 25 + /* Reset XDONB */ + 15 01 00 00 00 00 02 5b 43 + 15 01 00 00 00 00 02 5c 00 + 15 01 00 00 00 00 02 5f 73 + 15 01 00 00 00 00 02 60 73 + 15 01 00 00 00 00 02 63 22 + 15 01 00 00 00 00 02 64 00 + 15 01 00 00 00 00 02 67 08 + 15 01 00 00 00 00 02 68 04 + /* Resolution:1440x2560*/ + 15 01 00 00 00 00 02 72 02 + /* mux */ + 15 01 00 00 00 00 02 7a 80 + 15 01 00 00 00 00 02 7b 91 + 15 01 00 00 00 00 02 7c d8 + 15 01 00 00 00 00 02 7d 60 + 15 01 00 00 00 00 02 7f 15 + 15 01 00 00 00 00 02 75 15 + /* ABOFF */ + 15 01 00 00 00 00 02 b3 c0 + 15 01 00 00 00 00 02 b4 00 + 15 01 00 00 00 00 02 b5 00 + /* Source EQ */ + 15 01 00 00 00 00 02 78 00 + 15 01 00 00 00 00 02 79 00 + 15 01 00 00 00 00 02 80 00 + 15 01 00 00 00 00 02 83 00 + /* FP BP */ + 15 01 00 00 00 00 02 93 0a + 15 01 00 00 00 00 02 94 0a + /* Inversion Type */ + 15 01 00 00 00 00 02 8a 00 + 15 01 00 00 00 00 02 9b ff + /* IMGSWAP =1 @PortSwap=1 */ + 15 01 00 00 00 00 02 9d b0 + 15 01 00 00 00 00 02 9f 63 + 15 01 00 00 00 00 02 98 10 + /* FRM */ + 15 01 00 00 00 00 02 ec 00 + /* CMD1 */ + 15 01 00 00 00 00 02 ff 10 + /* VESA DSC PPS settings + * (1440x2560 slide 16H) + */ + 39 01 00 00 00 00 11 c1 09 + 20 00 10 02 00 02 68 01 bb + 00 0a 06 67 04 c5 + + 39 01 00 00 00 00 03 c2 10 f0 + /* C0h = 0x0(2 Port SDC) + * 0x01(1 PortA FBC) + * 0x02(MTK) 0x03(1 PortA VESA) + */ + 15 01 00 00 00 00 02 c0 03 + /* VBP+VSA=,VFP = 10H */ + 15 01 00 00 00 00 04 3b 03 0a 0a + /* FTE on */ + 15 01 00 00 00 00 02 35 00 + /* EN_BK =1(auto black) */ + 15 01 00 00 00 00 02 e5 01 + /* CMD mode(10) VDO mode(03) */ + 15 01 00 00 00 00 02 bb 10 + /* Non Reload MTP */ + 15 01 00 00 00 00 02 fb 01 + /* SlpOut + DispOn */ + 05 01 00 00 78 00 02 11 00 + 05 01 00 00 78 00 02 29 00 + ]; + qcom,mdss-dsi-off-command = [05 01 00 00 78 00 + 02 28 00 05 01 00 00 78 00 02 10 00]; + + qcom,mdss-dsi-on-command-state = "dsi_hs_mode"; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + qcom,mdss-dsi-h-sync-pulse = <0>; + qcom,compression-mode = "dsc"; + qcom,mdss-dsc-slice-height = <16>; + qcom,mdss-dsc-slice-width = <720>; + qcom,mdss-dsc-slice-per-pkt = <2>; + qcom,mdss-dsc-bit-per-component = <10>; + qcom,mdss-dsc-bit-per-pixel = <10>; + qcom,mdss-dsc-block-prediction-enable; + }; + + timing@1 { + qcom,mdss-dsi-panel-width = <1080>; + qcom,mdss-dsi-panel-height = <1920>; + qcom,mdss-dsi-h-front-porch = <0>; + qcom,mdss-dsi-h-back-porch = <0>; + qcom,mdss-dsi-h-pulse-width = <0>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <0>; + qcom,mdss-dsi-v-front-porch = <0>; + qcom,mdss-dsi-v-pulse-width = <0>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-on-command = [ + 15 01 00 00 00 00 02 bb 10 + 15 01 00 00 00 00 02 b0 03 + 05 01 00 00 78 00 01 11 + 15 01 00 00 00 00 02 51 ff + 15 01 00 00 00 00 02 53 24 + 15 01 00 00 00 00 02 ff 23 + 15 01 00 00 00 00 02 08 05 + 15 01 00 00 00 00 02 46 90 + 15 01 00 00 00 00 02 ff 10 + 15 01 00 00 00 00 02 ff f0 + 15 01 00 00 00 00 02 92 01 + 15 01 00 00 00 00 02 ff 10 + /* enable TE generation */ + 15 01 00 00 00 00 02 35 00 + 05 01 00 00 28 00 01 29]; + qcom,mdss-dsi-off-command = [ + 05 01 00 00 10 00 01 28 + 05 01 00 00 40 00 01 10]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + qcom,mdss-dsi-h-sync-pulse = <0>; + qcom,compression-mode = "dsc"; + qcom,mdss-dsc-slice-height = <16>; + qcom,mdss-dsc-slice-width = <540>; + qcom,mdss-dsc-slice-per-pkt = <2>; + qcom,mdss-dsc-bit-per-component = <10>; + qcom,mdss-dsc-bit-per-pixel = <10>; + qcom,mdss-dsc-block-prediction-enable; + }; + + timing@2 { + qcom,mdss-dsi-panel-framerate = <90>; + qcom,mdss-dsi-panel-width = <1440>; + qcom,mdss-dsi-panel-height = <2560>; + qcom,mdss-dsi-h-front-porch = <100>; + qcom,mdss-dsi-h-back-porch = <32>; + qcom,mdss-dsi-h-pulse-width = <16>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <8>; + qcom,mdss-dsi-v-front-porch = <10>; + qcom,mdss-dsi-v-pulse-width = <2>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-on-command = [ + /* CMD2_P0 */ + 15 01 00 00 00 00 02 ff 20 + 15 01 00 00 00 00 02 fb 01 + 15 01 00 00 00 00 02 00 01 + 15 01 00 00 00 00 02 01 55 + 15 01 00 00 00 00 02 02 45 + 15 01 00 00 00 00 02 05 40 + 15 01 00 00 00 00 02 06 19 + 15 01 00 00 00 00 02 07 1e + 15 01 00 00 00 00 02 0b 73 + 15 01 00 00 00 00 02 0c 73 + 15 01 00 00 00 00 02 0e b0 + 15 01 00 00 00 00 02 0f aE + 15 01 00 00 00 00 02 11 b8 + 15 01 00 00 00 00 02 13 00 + 15 01 00 00 00 00 02 58 80 + 15 01 00 00 00 00 02 59 01 + 15 01 00 00 00 00 02 5a 00 + 15 01 00 00 00 00 02 5b 01 + 15 01 00 00 00 00 02 5c 80 + 15 01 00 00 00 00 02 5d 81 + 15 01 00 00 00 00 02 5e 00 + 15 01 00 00 00 00 02 5f 01 + 15 01 00 00 00 00 02 72 31 + 15 01 00 00 00 00 02 68 03 + /* CMD2_P4 */ + 15 01 00 00 00 00 02 ff 24 + 15 01 00 00 00 00 02 fb 01 + 15 01 00 00 00 00 02 00 1c + 15 01 00 00 00 00 02 01 0b + 15 01 00 00 00 00 02 02 0c + 15 01 00 00 00 00 02 03 01 + 15 01 00 00 00 00 02 04 0f + 15 01 00 00 00 00 02 05 10 + 15 01 00 00 00 00 02 06 10 + 15 01 00 00 00 00 02 07 10 + 15 01 00 00 00 00 02 08 89 + 15 01 00 00 00 00 02 09 8a + 15 01 00 00 00 00 02 0a 13 + 15 01 00 00 00 00 02 0b 13 + 15 01 00 00 00 00 02 0c 15 + 15 01 00 00 00 00 02 0d 15 + 15 01 00 00 00 00 02 0e 17 + 15 01 00 00 00 00 02 0f 17 + 15 01 00 00 00 00 02 10 1c + 15 01 00 00 00 00 02 11 0b + 15 01 00 00 00 00 02 12 0c + 15 01 00 00 00 00 02 13 01 + 15 01 00 00 00 00 02 14 0f + 15 01 00 00 00 00 02 15 10 + 15 01 00 00 00 00 02 16 10 + 15 01 00 00 00 00 02 17 10 + 15 01 00 00 00 00 02 18 89 + 15 01 00 00 00 00 02 19 8a + 15 01 00 00 00 00 02 1a 13 + 15 01 00 00 00 00 02 1b 13 + 15 01 00 00 00 00 02 1c 15 + 15 01 00 00 00 00 02 1d 15 + 15 01 00 00 00 00 02 1e 17 + 15 01 00 00 00 00 02 1f 17 + /* STV */ + 15 01 00 00 00 00 02 20 40 + 15 01 00 00 00 00 02 21 01 + 15 01 00 00 00 00 02 22 00 + 15 01 00 00 00 00 02 23 40 + 15 01 00 00 00 00 02 24 40 + 15 01 00 00 00 00 02 25 6d + 15 01 00 00 00 00 02 26 40 + 15 01 00 00 00 00 02 27 40 + /* Vend */ + 15 01 00 00 00 00 02 e0 00 + 15 01 00 00 00 00 02 dc 21 + 15 01 00 00 00 00 02 dd 22 + 15 01 00 00 00 00 02 de 07 + 15 01 00 00 00 00 02 df 07 + 15 01 00 00 00 00 02 e3 6d + 15 01 00 00 00 00 02 e1 07 + 15 01 00 00 00 00 02 e2 07 + /* UD */ + 15 01 00 00 00 00 02 29 d8 + 15 01 00 00 00 00 02 2a 2a + /* CLK */ + 15 01 00 00 00 00 02 4b 03 + 15 01 00 00 00 00 02 4c 11 + 15 01 00 00 00 00 02 4d 10 + 15 01 00 00 00 00 02 4e 01 + 15 01 00 00 00 00 02 4f 01 + 15 01 00 00 00 00 02 50 10 + 15 01 00 00 00 00 02 51 00 + 15 01 00 00 00 00 02 52 80 + 15 01 00 00 00 00 02 53 00 + 15 01 00 00 00 00 02 56 00 + 15 01 00 00 00 00 02 54 07 + 15 01 00 00 00 00 02 58 07 + 15 01 00 00 00 00 02 55 25 + /* Reset XDONB */ + 15 01 00 00 00 00 02 5b 43 + 15 01 00 00 00 00 02 5c 00 + 15 01 00 00 00 00 02 5f 73 + 15 01 00 00 00 00 02 60 73 + 15 01 00 00 00 00 02 63 22 + 15 01 00 00 00 00 02 64 00 + 15 01 00 00 00 00 02 67 08 + 15 01 00 00 00 00 02 68 04 + /* Resolution:1440x2560*/ + 15 01 00 00 00 00 02 72 02 + /* mux */ + 15 01 00 00 00 00 02 7a 80 + 15 01 00 00 00 00 02 7b 91 + 15 01 00 00 00 00 02 7c d8 + 15 01 00 00 00 00 02 7d 60 + 15 01 00 00 00 00 02 7f 15 + 15 01 00 00 00 00 02 75 15 + /* ABOFF */ + 15 01 00 00 00 00 02 b3 c0 + 15 01 00 00 00 00 02 b4 00 + 15 01 00 00 00 00 02 b5 00 + /* Source EQ */ + 15 01 00 00 00 00 02 78 00 + 15 01 00 00 00 00 02 79 00 + 15 01 00 00 00 00 02 80 00 + 15 01 00 00 00 00 02 83 00 + /* FP BP */ + 15 01 00 00 00 00 02 93 0a + 15 01 00 00 00 00 02 94 0a + /* Inversion Type */ + 15 01 00 00 00 00 02 8a 00 + 15 01 00 00 00 00 02 9b ff + /* IMGSWAP =1 @PortSwap=1 */ + 15 01 00 00 00 00 02 9d b0 + 15 01 00 00 00 00 02 9f 63 + 15 01 00 00 00 00 02 98 10 + /* FRM */ + 15 01 00 00 00 00 02 ec 00 + /* CMD1 */ + 15 01 00 00 00 00 02 ff 10 + /* VESA DSC PPS settings + * (1440x2560 slide 16H) + */ + 39 01 00 00 00 00 11 c1 09 + 20 00 10 02 00 02 68 01 bb + 00 0a 06 67 04 c5 + + 39 01 00 00 00 00 03 c2 10 f0 + /* C0h = 0x0(2 Port SDC) + * 0x01(1 PortA FBC) + * 0x02(MTK) 0x03(1 PortA VESA) + */ + 15 01 00 00 00 00 02 c0 03 + /* VBP+VSA=,VFP = 10H */ + 15 01 00 00 00 00 04 3b 03 0a 0a + /* FTE on */ + 15 01 00 00 00 00 02 35 00 + /* EN_BK =1(auto black) */ + 15 01 00 00 00 00 02 e5 01 + /* CMD mode(10) VDO mode(03) */ + 15 01 00 00 00 00 02 bb 10 + /* Non Reload MTP */ + 15 01 00 00 00 00 02 fb 01 + /* SlpOut + DispOn */ + 05 01 00 00 78 00 02 11 00 + 05 01 00 00 78 00 02 29 00 + ]; + qcom,mdss-dsi-off-command = [05 01 00 00 78 00 + 02 28 00 05 01 00 00 78 00 02 10 00]; + + qcom,mdss-dsi-on-command-state = "dsi_hs_mode"; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + qcom,mdss-dsi-h-sync-pulse = <0>; + qcom,compression-mode = "dsc"; + qcom,mdss-dsc-slice-height = <16>; + qcom,mdss-dsc-slice-width = <720>; + qcom,mdss-dsc-slice-per-pkt = <2>; + qcom,mdss-dsc-bit-per-component = <10>; + qcom,mdss-dsc-bit-per-pixel = <10>; + qcom,mdss-dsc-block-prediction-enable; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sim-dsc375-cmd.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sim-dsc375-cmd.dtsi new file mode 100644 index 000000000000..ef40a2e7b3e6 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sim-dsc375-cmd.dtsi @@ -0,0 +1,280 @@ +&mdss_mdp { + dsi_sim_dsc_375_cmd: qcom,mdss_dsi_sim_dsc_375_cmd { + qcom,mdss-dsi-panel-name = + "Simulator cmd mode DSC 3.75:1 dsi panel"; + qcom,mdss-dsi-panel-type = "dsi_cmd_mode"; + + qcom,dsi-ctrl-num = <0>; + qcom,dsi-phy-num = <0>; + qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0"; + + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-bpp = <24>; + qcom,mdss-dsi-color-order = "rgb_swap_rgb"; + qcom,mdss-dsi-underflow-color = <0xff>; + qcom,mdss-dsi-border-color = <0>; + qcom,mdss-dsi-traffic-mode = "non_burst_sync_event"; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>; + qcom,mdss-dsi-bl-max-level = <4095>; + qcom,adjust-timer-wakeup-ms = <1>; + qcom,mdss-dsi-te-pin-select = <1>; + qcom,mdss-dsi-wr-mem-start = <0x2c>; + qcom,mdss-dsi-wr-mem-continue = <0x3c>; + qcom,mdss-dsi-te-dcs-command = <1>; + qcom,mdss-dsi-te-check-enable; + qcom,mdss-dsi-te-using-wd; + qcom,mdss-dsi-te-using-te-pin; + qcom,panel-ack-disabled; + + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-panel-width = <1440>; + qcom,mdss-dsi-panel-height = <2560>; + qcom,mdss-dsi-h-front-porch = <100>; + qcom,mdss-dsi-h-back-porch = <32>; + qcom,mdss-dsi-h-pulse-width = <16>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <8>; + qcom,mdss-dsi-v-front-porch = <10>; + qcom,mdss-dsi-v-pulse-width = <2>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-on-command = [ + /* CMD2_P0 */ + 15 01 00 00 00 00 02 ff 20 + 15 01 00 00 00 00 02 fb 01 + 15 01 00 00 00 00 02 00 01 + 15 01 00 00 00 00 02 01 55 + 15 01 00 00 00 00 02 02 45 + 15 01 00 00 00 00 02 05 40 + 15 01 00 00 00 00 02 06 19 + 15 01 00 00 00 00 02 07 1e + 15 01 00 00 00 00 02 0b 73 + 15 01 00 00 00 00 02 0c 73 + 15 01 00 00 00 00 02 0e b0 + 15 01 00 00 00 00 02 0f aE + 15 01 00 00 00 00 02 11 b8 + 15 01 00 00 00 00 02 13 00 + 15 01 00 00 00 00 02 58 80 + 15 01 00 00 00 00 02 59 01 + 15 01 00 00 00 00 02 5a 00 + 15 01 00 00 00 00 02 5b 01 + 15 01 00 00 00 00 02 5c 80 + 15 01 00 00 00 00 02 5d 81 + 15 01 00 00 00 00 02 5e 00 + 15 01 00 00 00 00 02 5f 01 + 15 01 00 00 00 00 02 72 31 + 15 01 00 00 00 00 02 68 03 + /* CMD2_P4 */ + 15 01 00 00 00 00 02 ff 24 + 15 01 00 00 00 00 02 fb 01 + 15 01 00 00 00 00 02 00 1c + 15 01 00 00 00 00 02 01 0b + 15 01 00 00 00 00 02 02 0c + 15 01 00 00 00 00 02 03 01 + 15 01 00 00 00 00 02 04 0f + 15 01 00 00 00 00 02 05 10 + 15 01 00 00 00 00 02 06 10 + 15 01 00 00 00 00 02 07 10 + 15 01 00 00 00 00 02 08 89 + 15 01 00 00 00 00 02 09 8a + 15 01 00 00 00 00 02 0a 13 + 15 01 00 00 00 00 02 0b 13 + 15 01 00 00 00 00 02 0c 15 + 15 01 00 00 00 00 02 0d 15 + 15 01 00 00 00 00 02 0e 17 + 15 01 00 00 00 00 02 0f 17 + 15 01 00 00 00 00 02 10 1c + 15 01 00 00 00 00 02 11 0b + 15 01 00 00 00 00 02 12 0c + 15 01 00 00 00 00 02 13 01 + 15 01 00 00 00 00 02 14 0f + 15 01 00 00 00 00 02 15 10 + 15 01 00 00 00 00 02 16 10 + 15 01 00 00 00 00 02 17 10 + 15 01 00 00 00 00 02 18 89 + 15 01 00 00 00 00 02 19 8a + 15 01 00 00 00 00 02 1a 13 + 15 01 00 00 00 00 02 1b 13 + 15 01 00 00 00 00 02 1c 15 + 15 01 00 00 00 00 02 1d 15 + 15 01 00 00 00 00 02 1e 17 + 15 01 00 00 00 00 02 1f 17 + /* STV */ + 15 01 00 00 00 00 02 20 40 + 15 01 00 00 00 00 02 21 01 + 15 01 00 00 00 00 02 22 00 + 15 01 00 00 00 00 02 23 40 + 15 01 00 00 00 00 02 24 40 + 15 01 00 00 00 00 02 25 6d + 15 01 00 00 00 00 02 26 40 + 15 01 00 00 00 00 02 27 40 + /* Vend */ + 15 01 00 00 00 00 02 e0 00 + 15 01 00 00 00 00 02 dc 21 + 15 01 00 00 00 00 02 dd 22 + 15 01 00 00 00 00 02 de 07 + 15 01 00 00 00 00 02 df 07 + 15 01 00 00 00 00 02 e3 6d + 15 01 00 00 00 00 02 e1 07 + 15 01 00 00 00 00 02 e2 07 + /* UD */ + 15 01 00 00 00 00 02 29 d8 + 15 01 00 00 00 00 02 2a 2a + /* CLK */ + 15 01 00 00 00 00 02 4b 03 + 15 01 00 00 00 00 02 4c 11 + 15 01 00 00 00 00 02 4d 10 + 15 01 00 00 00 00 02 4e 01 + 15 01 00 00 00 00 02 4f 01 + 15 01 00 00 00 00 02 50 10 + 15 01 00 00 00 00 02 51 00 + 15 01 00 00 00 00 02 52 80 + 15 01 00 00 00 00 02 53 00 + 15 01 00 00 00 00 02 56 00 + 15 01 00 00 00 00 02 54 07 + 15 01 00 00 00 00 02 58 07 + 15 01 00 00 00 00 02 55 25 + /* Reset XDONB */ + 15 01 00 00 00 00 02 5b 43 + 15 01 00 00 00 00 02 5c 00 + 15 01 00 00 00 00 02 5f 73 + 15 01 00 00 00 00 02 60 73 + 15 01 00 00 00 00 02 63 22 + 15 01 00 00 00 00 02 64 00 + 15 01 00 00 00 00 02 67 08 + 15 01 00 00 00 00 02 68 04 + /* Resolution:1440x2560*/ + 15 01 00 00 00 00 02 72 02 + /* mux */ + 15 01 00 00 00 00 02 7a 80 + 15 01 00 00 00 00 02 7b 91 + 15 01 00 00 00 00 02 7c d8 + 15 01 00 00 00 00 02 7d 60 + 15 01 00 00 00 00 02 7f 15 + 15 01 00 00 00 00 02 75 15 + /* ABOFF */ + 15 01 00 00 00 00 02 b3 c0 + 15 01 00 00 00 00 02 b4 00 + 15 01 00 00 00 00 02 b5 00 + /* Source EQ */ + 15 01 00 00 00 00 02 78 00 + 15 01 00 00 00 00 02 79 00 + 15 01 00 00 00 00 02 80 00 + 15 01 00 00 00 00 02 83 00 + /* FP BP */ + 15 01 00 00 00 00 02 93 0a + 15 01 00 00 00 00 02 94 0a + /* Inversion Type */ + 15 01 00 00 00 00 02 8a 00 + 15 01 00 00 00 00 02 9b ff + /* IMGSWAP =1 @PortSwap=1 */ + 15 01 00 00 00 00 02 9d b0 + 15 01 00 00 00 00 02 9f 63 + 15 01 00 00 00 00 02 98 10 + /* FRM */ + 15 01 00 00 00 00 02 ec 00 + /* CMD1 */ + 15 01 00 00 00 00 02 ff 10 + /* VESA DSC PPS settings + * (1440x2560 slide 16H) + */ + 39 01 00 00 00 00 11 c1 09 + 20 00 10 02 00 02 68 01 bb + 00 0a 06 67 04 c5 + + 39 01 00 00 00 00 03 c2 10 f0 + /* C0h = 0x0(2 Port SDC) + * 0x01(1 PortA FBC) + * 0x02(MTK) 0x03(1 PortA VESA) + */ + 15 01 00 00 00 00 02 c0 03 + /* VBP+VSA=,VFP = 10H */ + 15 01 00 00 00 00 04 3b 03 0a 0a + /* FTE on */ + 15 01 00 00 00 00 02 35 00 + /* EN_BK =1(auto black) */ + 15 01 00 00 00 00 02 e5 01 + /* CMD mode(10) VDO mode(03) */ + 15 01 00 00 00 00 02 bb 10 + /* Non Reload MTP */ + 15 01 00 00 00 00 02 fb 01 + /* SlpOut + DispOn */ + 05 01 00 00 78 00 02 11 00 + 05 01 00 00 78 00 02 29 00 + ]; + qcom,mdss-dsi-off-command = [05 01 00 00 78 00 + 02 28 00 05 01 00 00 78 00 02 10 00]; + + qcom,mdss-dsi-on-command-state = "dsi_hs_mode"; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + qcom,mdss-dsi-h-sync-pulse = <0>; + qcom,compression-mode = "dsc"; + qcom,mdss-dsc-slice-height = <16>; + qcom,mdss-dsc-slice-width = <720>; + qcom,mdss-dsc-slice-per-pkt = <2>; + qcom,mdss-dsc-bit-per-component = <10>; + qcom,mdss-dsc-bit-per-pixel = <8>; + qcom,mdss-dsc-block-prediction-enable; + }; + + timing@1 { + qcom,mdss-dsi-panel-width = <1080>; + qcom,mdss-dsi-panel-height = <1920>; + qcom,mdss-dsi-h-front-porch = <0>; + qcom,mdss-dsi-h-back-porch = <0>; + qcom,mdss-dsi-h-pulse-width = <0>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <0>; + qcom,mdss-dsi-v-front-porch = <0>; + qcom,mdss-dsi-v-pulse-width = <0>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-on-command = [ + 15 01 00 00 00 00 02 bb 10 + 15 01 00 00 00 00 02 b0 03 + 05 01 00 00 78 00 01 11 + 15 01 00 00 00 00 02 51 ff + 15 01 00 00 00 00 02 53 24 + 15 01 00 00 00 00 02 ff 23 + 15 01 00 00 00 00 02 08 05 + 15 01 00 00 00 00 02 46 90 + 15 01 00 00 00 00 02 ff 10 + 15 01 00 00 00 00 02 ff f0 + 15 01 00 00 00 00 02 92 01 + 15 01 00 00 00 00 02 ff 10 + /* enable TE generation */ + 15 01 00 00 00 00 02 35 00 + 05 01 00 00 28 00 01 29]; + qcom,mdss-dsi-off-command = [ + 05 01 00 00 10 00 01 28 + 05 01 00 00 40 00 01 10]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + qcom,mdss-dsi-h-sync-pulse = <0>; + qcom,compression-mode = "dsc"; + qcom,mdss-dsc-slice-height = <16>; + qcom,mdss-dsc-slice-width = <540>; + qcom,mdss-dsc-slice-per-pkt = <2>; + qcom,mdss-dsc-bit-per-component = <10>; + qcom,mdss-dsc-bit-per-pixel = <8>; + qcom,mdss-dsc-block-prediction-enable; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sim-dualmipi-cmd.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sim-dualmipi-cmd.dtsi new file mode 100644 index 000000000000..5f4be88fb88f --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sim-dualmipi-cmd.dtsi @@ -0,0 +1,141 @@ +&mdss_mdp { + dsi_dual_sim_cmd: qcom,mdss_dsi_dual_sim_cmd { + qcom,mdss-dsi-panel-name = "Sim dual cmd mode dsi panel"; + qcom,mdss-dsi-panel-type = "dsi_cmd_mode"; + + qcom,dsi-ctrl-num = <0 1>; + qcom,dsi-phy-num = <0 1>; + qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0"; + + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-bpp = <24>; + qcom,mdss-dsi-color-order = "rgb_swap_rgb"; + qcom,mdss-dsi-underflow-color = <0xff>; + qcom,mdss-dsi-border-color = <0>; + qcom,mdss-dsi-traffic-mode = "non_burst_sync_event"; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,cmd-sync-wait-broadcast; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-hor-line-idle = <0 40 256>, + <40 120 128>, + <120 240 64>; + qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>; + qcom,mdss-dsi-bl-max-level = <4095>; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + qcom,mdss-dsi-te-pin-select = <1>; + qcom,mdss-dsi-wr-mem-start = <0x2c>; + qcom,mdss-dsi-wr-mem-continue = <0x3c>; + qcom,mdss-dsi-te-dcs-command = <1>; + qcom,mdss-dsi-te-check-enable; + qcom,mdss-dsi-te-using-wd; + qcom,mdss-dsi-te-using-te-pin; + qcom,panel-ack-disabled; + qcom,mdss-dsi-qsync-min-refresh-rate = <45>; + + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-width = <540>; + qcom,mdss-dsi-panel-height = <1920>; + qcom,mdss-dsi-h-front-porch = <28>; + qcom,mdss-dsi-h-back-porch = <4>; + qcom,mdss-dsi-h-pulse-width = <4>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <12>; + qcom,mdss-dsi-v-front-porch = <12>; + qcom,mdss-dsi-v-pulse-width = <2>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-panel-framerate = <120>; + qcom,mdss-dsi-on-command = + [/* exit sleep mode, wait 0ms */ + 05 01 00 00 00 00 01 29]; + /* Set display on, wait 16ms */ + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command = + [05 01 00 00 00 00 02 28 00 + 05 01 00 00 00 00 02 10 00]; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + qcom,mdss-dsi-qsync-on-commands = + [15 01 00 00 00 00 02 51 00]; + qcom,mdss-dsi-qsync-on-commands-state = + "dsi_hs_mode"; + qcom,mdss-dsi-qsync-off-commands = + [15 01 00 00 00 00 02 51 00]; + qcom,mdss-dsi-qsync-off-commands-state = + "dsi_hs_mode"; + }; + + timing@1 { + qcom,mdss-dsi-panel-width = <1280>; + qcom,mdss-dsi-panel-height = <1440>; + qcom,mdss-dsi-h-front-porch = <120>; + qcom,mdss-dsi-h-back-porch = <44>; + qcom,mdss-dsi-h-pulse-width = <16>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <4>; + qcom,mdss-dsi-v-front-porch = <8>; + qcom,mdss-dsi-v-pulse-width = <4>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-h-sync-pulse = <0>; + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-on-command = + [/* exit sleep mode, wait 0ms */ + 05 01 00 00 00 00 01 29]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command = + [05 01 00 00 00 00 02 28 00 + 05 01 00 00 00 00 02 10 00]; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + qcom,mdss-dsi-qsync-on-commands = + [15 01 00 00 00 00 02 51 00]; + qcom,mdss-dsi-qsync-on-commands-state = + "dsi_hs_mode"; + qcom,mdss-dsi-qsync-off-commands = + [15 01 00 00 00 00 02 51 00]; + qcom,mdss-dsi-qsync-off-commands-state = + "dsi_hs_mode"; + }; + + timing@2 { + qcom,mdss-dsi-panel-width = <1080>; + qcom,mdss-dsi-panel-height = <3840>; + qcom,mdss-dsi-h-front-porch = <30>; + qcom,mdss-dsi-h-back-porch = <100>; + qcom,mdss-dsi-h-pulse-width = <4>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <7>; + qcom,mdss-dsi-v-front-porch = <8>; + qcom,mdss-dsi-v-pulse-width = <1>; + qcom,mdss-dsi-h-sync-pulse = <0>; + qcom,mdss-dsi-panel-framerate = <40>; + qcom,mdss-dsi-on-command = + [/* exit sleep mode, wait 0ms */ + 05 01 00 00 00 00 01 29]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command = + [05 01 00 00 00 00 02 28 00 + 05 01 00 00 00 00 02 10 00]; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + qcom,mdss-dsi-qsync-on-commands = + [15 01 00 00 00 00 02 51 00]; + qcom,mdss-dsi-qsync-on-commands-state = + "dsi_hs_mode"; + qcom,mdss-dsi-qsync-off-commands = + [15 01 00 00 00 00 02 51 00]; + qcom,mdss-dsi-qsync-off-commands-state = + "dsi_hs_mode"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sim-dualmipi-dsc375-cmd.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sim-dualmipi-dsc375-cmd.dtsi new file mode 100644 index 000000000000..87b4a76a3a96 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sim-dualmipi-dsc375-cmd.dtsi @@ -0,0 +1,327 @@ +&mdss_mdp { + dsi_dual_sim_dsc_375_cmd: qcom,mdss_dsi_dual_sim_dsc_375_cmd { + qcom,mdss-dsi-panel-name = + "Sim dual cmd mode DSC 3.75:1 dsi panel"; + qcom,mdss-dsi-panel-type = "dsi_cmd_mode"; + + qcom,dsi-ctrl-num = <0 1>; + qcom,dsi-phy-num = <0 1>; + qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0"; + + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-bpp = <24>; + qcom,mdss-dsi-color-order = "rgb_swap_rgb"; + qcom,mdss-dsi-underflow-color = <0xff>; + qcom,mdss-dsi-border-color = <0>; + qcom,mdss-dsi-traffic-mode = "non_burst_sync_event"; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,cmd-sync-wait-broadcast; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-hor-line-idle = <0 40 256>, + <40 120 128>, + <120 240 64>; + qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>; + qcom,mdss-dsi-bl-max-level = <4095>; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + qcom,mdss-dsi-te-pin-select = <1>; + qcom,mdss-dsi-wr-mem-start = <0x2c>; + qcom,mdss-dsi-wr-mem-continue = <0x3c>; + qcom,mdss-dsi-te-dcs-command = <1>; + qcom,mdss-dsi-te-check-enable; + qcom,mdss-dsi-te-using-wd; + qcom,mdss-dsi-te-using-te-pin; + qcom,panel-ack-disabled; + + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-width = <1080>; + qcom,mdss-dsi-panel-height = <3840>; + qcom,mdss-dsi-h-front-porch = <30>; + qcom,mdss-dsi-h-back-porch = <100>; + qcom,mdss-dsi-h-pulse-width = <4>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <7>; + qcom,mdss-dsi-v-front-porch = <8>; + qcom,mdss-dsi-v-pulse-width = <1>; + qcom,mdss-dsi-h-sync-pulse = <0>; + qcom,mdss-dsi-panel-framerate = <60>; + + qcom,mdss-dsi-on-command = [ + 39 01 00 00 00 00 11 91 09 20 00 20 02 + 00 03 1c 04 21 00 + 0f 03 19 01 97 + 39 01 00 00 00 00 03 92 10 f0 + 15 01 00 00 00 00 02 90 03 + 15 01 00 00 00 00 02 03 01 + 39 01 00 00 00 00 06 f0 55 aa 52 08 04 + 15 01 00 00 00 00 02 c0 03 + 39 01 00 00 00 00 06 f0 55 aa 52 08 07 + 15 01 00 00 00 00 02 ef 01 + 39 01 00 00 00 00 06 f0 55 aa 52 08 00 + 15 01 00 00 00 00 02 b4 01 + 15 01 00 00 00 00 02 35 00 + 39 01 00 00 00 00 06 f0 55 aa 52 08 01 + 39 01 00 00 00 00 05 ff aa 55 a5 80 + 15 01 00 00 00 00 02 6f 01 + 15 01 00 00 00 00 02 f3 10 + 39 01 00 00 00 00 05 ff aa 55 a5 00 + /* sleep out + delay 120ms */ + 05 01 00 00 78 00 01 11 + /* display on + delay 120ms */ + 05 01 00 00 78 00 01 29 + ]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command = + [05 01 00 00 78 00 02 28 00 + 05 01 00 00 78 00 02 10 00]; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + + qcom,compression-mode = "dsc"; + qcom,mdss-dsc-slice-height = <32>; + qcom,mdss-dsc-slice-width = <1080>; + qcom,mdss-dsc-slice-per-pkt = <1>; + qcom,mdss-dsc-bit-per-component = <10>; + qcom,mdss-dsc-bit-per-pixel = <8>; + qcom,mdss-dsc-block-prediction-enable; + }; + + timing@1 { + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-panel-width = <720>; + qcom,mdss-dsi-panel-height = <2560>; + qcom,mdss-dsi-h-front-porch = <100>; + qcom,mdss-dsi-h-back-porch = <32>; + qcom,mdss-dsi-h-pulse-width = <16>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <7>; + qcom,mdss-dsi-v-front-porch = <8>; + qcom,mdss-dsi-v-pulse-width = <1>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-h-sync-pulse = <0>; + qcom,mdss-dsi-on-command = [ + /* CMD2_P0 */ + 15 01 00 00 00 00 02 FF 20 + 15 01 00 00 00 00 02 fb 01 + 15 01 00 00 00 00 02 00 01 + 15 01 00 00 00 00 02 01 55 + 15 01 00 00 00 00 02 02 45 + 15 01 00 00 00 00 02 05 40 + 15 01 00 00 00 00 02 06 19 + 15 01 00 00 00 00 02 07 1E + 15 01 00 00 00 00 02 0B 73 + 15 01 00 00 00 00 02 0C 73 + 15 01 00 00 00 00 02 0E B0 + 15 01 00 00 00 00 02 0F AE + 15 01 00 00 00 00 02 11 B8 + 15 01 00 00 00 00 02 13 00 + 15 01 00 00 00 00 02 58 80 + 15 01 00 00 00 00 02 59 01 + 15 01 00 00 00 00 02 5A 00 + 15 01 00 00 00 00 02 5B 01 + 15 01 00 00 00 00 02 5C 80 + 15 01 00 00 00 00 02 5D 81 + 15 01 00 00 00 00 02 5E 00 + 15 01 00 00 00 00 02 5F 01 + 15 01 00 00 00 00 02 72 31 + 15 01 00 00 00 00 02 68 03 + /* CMD2_P4 */ + 15 01 00 00 00 00 02 ff 24 + 15 01 00 00 00 00 02 fb 01 + 15 01 00 00 00 00 02 00 1C + 15 01 00 00 00 00 02 01 0B + 15 01 00 00 00 00 02 02 0C + 15 01 00 00 00 00 02 03 01 + 15 01 00 00 00 00 02 04 0F + 15 01 00 00 00 00 02 05 10 + 15 01 00 00 00 00 02 06 10 + 15 01 00 00 00 00 02 07 10 + 15 01 00 00 00 00 02 08 89 + 15 01 00 00 00 00 02 09 8A + 15 01 00 00 00 00 02 0A 13 + 15 01 00 00 00 00 02 0B 13 + 15 01 00 00 00 00 02 0C 15 + 15 01 00 00 00 00 02 0D 15 + 15 01 00 00 00 00 02 0E 17 + 15 01 00 00 00 00 02 0F 17 + 15 01 00 00 00 00 02 10 1C + 15 01 00 00 00 00 02 11 0B + 15 01 00 00 00 00 02 12 0C + 15 01 00 00 00 00 02 13 01 + 15 01 00 00 00 00 02 14 0F + 15 01 00 00 00 00 02 15 10 + 15 01 00 00 00 00 02 16 10 + 15 01 00 00 00 00 02 17 10 + 15 01 00 00 00 00 02 18 89 + 15 01 00 00 00 00 02 19 8A + 15 01 00 00 00 00 02 1A 13 + 15 01 00 00 00 00 02 1B 13 + 15 01 00 00 00 00 02 1C 15 + 15 01 00 00 00 00 02 1D 15 + 15 01 00 00 00 00 02 1E 17 + 15 01 00 00 00 00 02 1F 17 + /* STV */ + 15 01 00 00 00 00 02 20 40 + 15 01 00 00 00 00 02 21 01 + 15 01 00 00 00 00 02 22 00 + 15 01 00 00 00 00 02 23 40 + 15 01 00 00 00 00 02 24 40 + 15 01 00 00 00 00 02 25 6D + 15 01 00 00 00 00 02 26 40 + 15 01 00 00 00 00 02 27 40 + /* Vend */ + 15 01 00 00 00 00 02 E0 00 + 15 01 00 00 00 00 02 DC 21 + 15 01 00 00 00 00 02 DD 22 + 15 01 00 00 00 00 02 DE 07 + 15 01 00 00 00 00 02 DF 07 + 15 01 00 00 00 00 02 E3 6D + 15 01 00 00 00 00 02 E1 07 + 15 01 00 00 00 00 02 E2 07 + /* UD */ + 15 01 00 00 00 00 02 29 D8 + 15 01 00 00 00 00 02 2A 2A + /* CLK */ + 15 01 00 00 00 00 02 4B 03 + 15 01 00 00 00 00 02 4C 11 + 15 01 00 00 00 00 02 4D 10 + 15 01 00 00 00 00 02 4E 01 + 15 01 00 00 00 00 02 4F 01 + 15 01 00 00 00 00 02 50 10 + 15 01 00 00 00 00 02 51 00 + 15 01 00 00 00 00 02 52 80 + 15 01 00 00 00 00 02 53 00 + 15 01 00 00 00 00 02 56 00 + 15 01 00 00 00 00 02 54 07 + 15 01 00 00 00 00 02 58 07 + 15 01 00 00 00 00 02 55 25 + /* Reset XDONB */ + 15 01 00 00 00 00 02 5B 43 + 15 01 00 00 00 00 02 5C 00 + 15 01 00 00 00 00 02 5F 73 + 15 01 00 00 00 00 02 60 73 + 15 01 00 00 00 00 02 63 22 + 15 01 00 00 00 00 02 64 00 + 15 01 00 00 00 00 02 67 08 + 15 01 00 00 00 00 02 68 04 + /* Resolution:1440x2560*/ + 15 01 00 00 00 00 02 72 02 + /* mux */ + 15 01 00 00 00 00 02 7A 80 + 15 01 00 00 00 00 02 7B 91 + 15 01 00 00 00 00 02 7C D8 + 15 01 00 00 00 00 02 7D 60 + 15 01 00 00 00 00 02 7F 15 + 15 01 00 00 00 00 02 75 15 + /* ABOFF */ + 15 01 00 00 00 00 02 B3 C0 + 15 01 00 00 00 00 02 B4 00 + 15 01 00 00 00 00 02 B5 00 + /* Source EQ */ + 15 01 00 00 00 00 02 78 00 + 15 01 00 00 00 00 02 79 00 + 15 01 00 00 00 00 02 80 00 + 15 01 00 00 00 00 02 83 00 + /* FP BP */ + 15 01 00 00 00 00 02 93 0A + 15 01 00 00 00 00 02 94 0A + /* Inversion Type */ + 15 01 00 00 00 00 02 8A 00 + 15 01 00 00 00 00 02 9B FF + /* IMGSWAP =1 @PortSwap=1 */ + 15 01 00 00 00 00 02 9D B0 + 15 01 00 00 00 00 02 9F 63 + 15 01 00 00 00 00 02 98 10 + /* FRM */ + 15 01 00 00 00 00 02 EC 00 + /* CMD1 */ + 15 01 00 00 00 00 02 ff 10 + /* VBP+VSA=,VFP = 10H */ + 15 01 00 00 00 00 04 3B 03 0A 0A + /* FTE on */ + 15 01 00 00 00 00 02 35 00 + /* EN_BK =1(auto black) */ + 15 01 00 00 00 00 02 E5 01 + /* CMD mode(10) VDO mode(03) */ + 15 01 00 00 00 00 02 BB 10 + /* Non Reload MTP */ + 15 01 00 00 00 00 02 FB 01 + /* SlpOut + DispOn */ + 05 01 00 00 78 00 02 11 00 + 05 01 00 00 78 00 02 29 00 + ]; + qcom,mdss-dsi-off-command = [05 01 00 00 78 00 + 02 28 00 05 01 00 00 78 00 02 10 00]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + qcom,compression-mode = "dsc"; + qcom,mdss-dsc-slice-height = <16>; + qcom,mdss-dsc-slice-width = <720>; + qcom,mdss-dsc-slice-per-pkt = <1>; + qcom,mdss-dsc-bit-per-component = <10>; + qcom,mdss-dsc-bit-per-pixel = <8>; + qcom,mdss-dsc-block-prediction-enable; + }; + + timing@2 { + qcom,mdss-dsi-panel-width = <2520>; + qcom,mdss-dsi-panel-height = <2160>; + qcom,mdss-dsi-h-front-porch = <30>; + qcom,mdss-dsi-h-back-porch = <100>; + qcom,mdss-dsi-h-pulse-width = <4>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <7>; + qcom,mdss-dsi-v-front-porch = <8>; + qcom,mdss-dsi-v-pulse-width = <1>; + qcom,mdss-dsi-h-sync-pulse = <0>; + qcom,mdss-dsi-panel-framerate = <120>; + + qcom,mdss-dsi-on-command = [ + 39 01 00 00 00 00 11 91 09 20 00 20 02 + 00 03 1c 04 21 00 + 0f 03 19 01 97 + 39 01 00 00 00 00 03 92 10 f0 + 15 01 00 00 00 00 02 90 03 + 15 01 00 00 00 00 02 03 01 + 39 01 00 00 00 00 06 f0 55 aa 52 08 04 + 15 01 00 00 00 00 02 c0 03 + 39 01 00 00 00 00 06 f0 55 aa 52 08 07 + 15 01 00 00 00 00 02 ef 01 + 39 01 00 00 00 00 06 f0 55 aa 52 08 00 + 15 01 00 00 00 00 02 b4 01 + 15 01 00 00 00 00 02 35 00 + 39 01 00 00 00 00 06 f0 55 aa 52 08 01 + 39 01 00 00 00 00 05 ff aa 55 a5 80 + 15 01 00 00 00 00 02 6f 01 + 15 01 00 00 00 00 02 f3 10 + 39 01 00 00 00 00 05 ff aa 55 a5 00 + /* sleep out + delay 120ms */ + 05 01 00 00 78 00 01 11 + /* display on + delay 120ms */ + 05 01 00 00 78 00 01 29 + ]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command = + [05 01 00 00 78 00 02 28 00 + 05 01 00 00 78 00 02 10 00]; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + + qcom,compression-mode = "dsc"; + qcom,mdss-dsc-slice-height = <1080>; + qcom,mdss-dsc-slice-width = <1260>; + qcom,mdss-dsc-slice-per-pkt = <2>; + qcom,mdss-dsc-bit-per-component = <10>; + qcom,mdss-dsc-bit-per-pixel = <8>; + qcom,mdss-dsc-block-prediction-enable; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sim-dualmipi-video.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sim-dualmipi-video.dtsi new file mode 100644 index 000000000000..3bee9f6f104d --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sim-dualmipi-video.dtsi @@ -0,0 +1,63 @@ +&mdss_mdp { + dsi_dual_sim_vid: qcom,mdss_dsi_dual_sim_video { + qcom,mdss-dsi-panel-name = "Sim dual video mode dsi panel"; + qcom,mdss-dsi-panel-type = "dsi_video_mode"; + + qcom,dsi-ctrl-num = <0 1>; + qcom,dsi-phy-num = <0 1>; + qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0"; + + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-bpp = <24>; + qcom,mdss-dsi-underflow-color = <0xff>; + qcom,mdss-dsi-border-color = <0>; + qcom,mdss-dsi-traffic-mode = "non_burst_sync_event"; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,mdss-dsi-panel-broadcast-mode; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-bl-max-level = <4095>; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + qcom,mdss-dsi-reset-sequence = <1 20>, <0 200>, <1 20>; + qcom,panel-ack-disabled; + qcom,mdss-dsi-qsync-min-refresh-rate = <45>; + + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-width = <1280>; + qcom,mdss-dsi-panel-height = <1440>; + qcom,mdss-dsi-h-front-porch = <120>; + qcom,mdss-dsi-h-back-porch = <44>; + qcom,mdss-dsi-h-pulse-width = <16>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <4>; + qcom,mdss-dsi-v-front-porch = <8>; + qcom,mdss-dsi-v-pulse-width = <4>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-h-sync-pulse = <0>; + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command = + [05 01 00 00 32 00 02 28 00 + 05 01 00 00 78 00 02 10 00]; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + qcom,mdss-dsi-qsync-on-commands = + [15 01 00 00 00 00 02 51 00]; + qcom,mdss-dsi-qsync-on-commands-state = + "dsi_hs_mode"; + qcom,mdss-dsi-qsync-off-commands = + [15 01 00 00 00 00 02 51 00]; + qcom,mdss-dsi-qsync-off-commands-state = + "dsi_hs_mode"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sim-sec-hd-cmd.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sim-sec-hd-cmd.dtsi new file mode 100644 index 000000000000..e9d31359ed5b --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sim-sec-hd-cmd.dtsi @@ -0,0 +1,68 @@ +&mdss_mdp { + dsi_sim_sec_hd_cmd: qcom,mdss_dsi_sim_sec_hd_cmd { + qcom,mdss-dsi-panel-name = + "sim hd command mode secondary dsi panel"; + qcom,mdss-dsi-panel-type = "dsi_cmd_mode"; + + qcom,dsi-sec-ctrl-num = <1>; + qcom,dsi-sec-phy-num = <1>; + qcom,dsi-select-sec-clocks = "src_byte_clk1", "src_pixel_clk1"; + + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-bpp = <24>; + qcom,mdss-dsi-underflow-color = <0xff>; + qcom,mdss-dsi-border-color = <0>; + qcom,mdss-dsi-traffic-mode = "burst_mode"; + qcom,panel-ack-disabled; + qcom,mdss-dsi-te-using-wd; + qcom,mdss-dsi-te-pin-select = <1>; + qcom,mdss-dsi-te-dcs-command = <1>; + qcom,mdss-dsi-te-check-enable; + qcom,mdss-dsi-te-using-te-pin; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>; + qcom,mdss-dsi-tx-eot-append; + qcom,mdss-dsi-post-init-delay = <1>; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-width = <720>; + qcom,mdss-dsi-panel-height = <1280>; + qcom,mdss-dsi-h-front-porch = <120>; + qcom,mdss-dsi-h-back-porch = <60>; + qcom,mdss-dsi-h-pulse-width = <12>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <2>; + qcom,mdss-dsi-v-front-porch = <12>; + qcom,mdss-dsi-v-pulse-width = <2>; + qcom,mdss-dsi-h-sync-pulse = <0>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-panel-framerate = <60>; + + qcom,mdss-dsi-on-command = [ + /* sleep out + delay 120ms */ + 05 01 00 00 78 00 01 11 + /* display on + delay 120ms */ + 05 01 00 00 78 00 01 29 + ]; + qcom,mdss-dsi-off-command = [ + 05 01 00 00 78 00 02 28 00 + 05 01 00 00 78 00 02 10 00 + ]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command-state = "dsi_lp_mode"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sim-video.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sim-video.dtsi new file mode 100644 index 000000000000..5a2ac01716d3 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sim-video.dtsi @@ -0,0 +1,62 @@ +&mdss_mdp { + dsi_sim_vid: qcom,mdss_dsi_sim_video { + qcom,mdss-dsi-panel-name = "Simulator video mode dsi panel"; + qcom,mdss-dsi-panel-type = "dsi_video_mode"; + + qcom,dsi-ctrl-num = <0>; + qcom,dsi-phy-num = <0>; + qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0"; + + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-bpp = <24>; + qcom,mdss-dsi-underflow-color = <0xff>; + qcom,mdss-dsi-border-color = <0>; + qcom,mdss-dsi-panel-hdr-enabled; + qcom,mdss-dsi-panel-hdr-color-primaries = <14500 15500 32000 + 17000 15500 30000 8000 3000>; + qcom,mdss-dsi-panel-peak-brightness = <4200000>; + qcom,mdss-dsi-panel-blackness-level = <3230>; + qcom,mdss-dsi-traffic-mode = "non_burst_sync_event"; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-t-clk-post = <0x04>; + qcom,mdss-dsi-t-clk-pre = <0x1b>; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + qcom,mdss-dsi-reset-sequence = <1 0>, <0 0>, <1 0>; + qcom,panel-ack-disabled; + + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-width = <640>; + qcom,mdss-dsi-panel-height = <480>; + qcom,mdss-dsi-h-front-porch = <8>; + qcom,mdss-dsi-h-back-porch = <8>; + qcom,mdss-dsi-h-pulse-width = <8>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <6>; + qcom,mdss-dsi-v-front-porch = <6>; + qcom,mdss-dsi-v-pulse-width = <2>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-panel-timings = + [00 00 00 00 00 00 00 00 00 00 00 00]; + qcom,mdss-dsi-on-command = + [32 01 00 00 00 00 02 00 00]; + qcom,mdss-dsi-off-command = + [22 01 00 00 00 00 02 00 00]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-h-sync-pulse = <0>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sw43404-amoled-dsc-fhd-plus-cmd.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sw43404-amoled-dsc-fhd-plus-cmd.dtsi new file mode 100644 index 000000000000..6195f8c82a53 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sw43404-amoled-dsc-fhd-plus-cmd.dtsi @@ -0,0 +1,103 @@ +&mdss_mdp { + dsi_sw43404_amoled_fhd_plus_cmd: qcom,mdss_dsi_sw43404_fhd_plus_cmd { + qcom,mdss-dsi-panel-name = + "sw43404 amoled boe fhd+ panel with DSC"; + qcom,mdss-dsi-panel-type = "dsi_cmd_mode"; + + qcom,dsi-ctrl-num = <0>; + qcom,dsi-phy-num = <0>; + qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0"; + + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-bpp = <24>; + qcom,mdss-dsi-color-order = "rgb_swap_rgb"; + qcom,mdss-dsi-underflow-color = <0xff>; + qcom,mdss-dsi-border-color = <0>; + + qcom,mdss-dsi-traffic-mode = "non_burst_sync_event"; + qcom,mdss-dsi-lane-map = "lane_map_0123"; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>; + qcom,mdss-dsi-te-pin-select = <1>; + qcom,mdss-dsi-wr-mem-start = <0x2c>; + qcom,mdss-dsi-wr-mem-continue = <0x3c>; + qcom,mdss-dsi-te-dcs-command = <1>; + qcom,mdss-dsi-te-check-enable; + qcom,mdss-dsi-te-using-te-pin; + qcom,mdss-pan-physical-width-dimension = <68>; + qcom,mdss-pan-physical-height-dimension = <138>; + qcom,mdss-dsi-panel-hdr-enabled; + qcom,mdss-dsi-panel-hdr-color-primaries = <14500 15500 32000 + 17000 15500 30000 8000 3000>; + qcom,mdss-dsi-panel-peak-brightness = <4200000>; + qcom,mdss-dsi-panel-blackness-level = <3230>; + + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-panel-width = <1080>; + qcom,mdss-dsi-panel-height = <2160>; + qcom,mdss-dsi-h-front-porch = <160>; + qcom,mdss-dsi-h-back-porch = <72>; + qcom,mdss-dsi-h-pulse-width = <16>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-h-sync-pulse = <0>; + qcom,mdss-dsi-v-back-porch = <8>; + qcom,mdss-dsi-v-front-porch = <8>; + qcom,mdss-dsi-v-pulse-width = <1>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-panel-jitter = <0x3 0x1>; + qcom,mdss-dsi-on-command = [ + 39 01 00 00 00 00 03 b0 a5 00 + 07 01 00 00 00 00 02 01 00 + 0a 01 00 00 00 00 80 11 00 00 89 30 80 + 08 70 04 38 02 1c 02 1c 02 1c 02 00 + 02 0e 00 20 34 29 00 07 00 0C 00 2e + 00 31 18 00 10 F0 03 0C 20 00 06 0B + 0B 33 0E 1C 2A 38 46 54 62 69 70 77 + 79 7B 7D 7E 01 02 01 00 09 40 09 BE + 19 FC 19 FA 19 F8 1A 38 1A 78 1A B6 + 2A F6 2B 34 2B 74 3B 74 6B F4 00 00 + 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 + 39 01 00 00 00 00 03 b0 a5 00 + 15 01 00 00 00 00 02 5e 10 + 39 01 00 00 00 00 06 b9 bf 11 40 00 30 + 39 01 00 00 00 00 09 F8 00 08 10 08 2D + 00 00 2D + 15 01 00 00 00 00 02 55 08 + 05 01 00 00 1e 00 02 11 00 + 15 01 00 00 78 00 02 3d 01 + 39 01 00 00 00 00 03 b0 a5 00 + 05 01 00 00 78 00 02 35 00 + 05 01 00 00 3c 00 02 29 00 + ]; + qcom,mdss-dsi-off-command = [ + 05 01 00 00 14 00 02 28 00 + 05 01 00 00 78 00 02 10 00]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + qcom,compression-mode = "dsc"; + qcom,mdss-dsc-slice-height = <270>; + qcom,mdss-dsc-slice-width = <540>; + qcom,mdss-dsc-slice-per-pkt = <1>; + qcom,mdss-dsc-bit-per-component = <8>; + qcom,mdss-dsc-bit-per-pixel = <8>; + qcom,mdss-dsc-block-prediction-enable; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sw43404-amoled-dsc-wqhd-cmd.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sw43404-amoled-dsc-wqhd-cmd.dtsi new file mode 100644 index 000000000000..032fc39b91bf --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sw43404-amoled-dsc-wqhd-cmd.dtsi @@ -0,0 +1,121 @@ +&mdss_mdp { + dsi_sw43404_amoled_cmd: qcom,mdss_dsi_sw43404_amoled_wqhd_cmd { + qcom,mdss-dsi-panel-name = + "sw43404 amoled cmd mode dsi boe panel with DSC"; + qcom,mdss-dsi-panel-type = "dsi_cmd_mode"; + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-bpp = <24>; + qcom,mdss-dsi-color-order = "rgb_swap_rgb"; + qcom,mdss-dsi-underflow-color = <0xff>; + qcom,mdss-dsi-border-color = <0>; + + qcom,dsi-ctrl-num = <0>; + qcom,dsi-phy-num = <0>; + qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0"; + + qcom,mdss-dsi-traffic-mode = "non_burst_sync_event"; + qcom,mdss-dsi-lane-map = "lane_map_0123"; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>; + qcom,mdss-dsi-te-pin-select = <1>; + qcom,mdss-dsi-wr-mem-start = <0x2c>; + qcom,mdss-dsi-wr-mem-continue = <0x3c>; + qcom,mdss-dsi-te-dcs-command = <1>; + qcom,mdss-dsi-te-check-enable; + qcom,mdss-dsi-te-using-te-pin; + qcom,mdss-dsi-panel-hdr-enabled; + qcom,mdss-dsi-panel-hdr-color-primaries = <14500 15500 32000 + 17000 15500 30000 8000 3000>; + qcom,mdss-dsi-panel-peak-brightness = <4200000>; + qcom,mdss-dsi-panel-blackness-level = <3230>; + qcom,mdss-dsi-qsync-min-refresh-rate = <55>; + + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-panel-width = <1440>; + qcom,mdss-dsi-panel-height = <2880>; + qcom,mdss-dsi-h-front-porch = <60>; + qcom,mdss-dsi-h-back-porch = <30>; + qcom,mdss-dsi-h-pulse-width = <12>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <8>; + qcom,mdss-dsi-v-front-porch = <8>; + qcom,mdss-dsi-v-pulse-width = <1>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-panel-jitter = <0x4 0x1>; + qcom,mdss-dsi-on-command = [ + 39 01 00 00 00 00 03 b0 a5 00 + 39 01 00 00 00 00 03 5c 42 00 + 07 01 00 00 00 00 02 01 00 + 0a 01 00 00 00 00 80 11 00 00 89 30 80 + 0B 40 05 A0 05 A0 02 D0 02 D0 02 00 + 02 68 00 20 9A DB 00 0A 00 0C 00 12 + 00 0E 18 00 10 F0 03 0C 20 00 06 0B + 0B 33 0E 1C 2A 38 46 54 62 69 70 77 + 79 7B 7D 7E 01 02 01 00 09 40 09 BE + 19 FC 19 FA 19 F8 1A 38 1A 78 1A B6 + 2A F6 2B 34 2B 74 3B 74 6B F4 00 00 + 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 + 39 01 00 00 00 00 03 b0 a5 00 + 39 01 00 00 00 00 09 F8 00 08 10 08 2D + 00 00 2D + 15 01 00 00 00 00 02 55 08 + 05 01 00 00 1e 00 02 11 00 + 39 01 00 00 00 00 03 b0 a5 00 + 15 01 00 00 00 00 02 e0 18 + 39 01 00 00 00 00 0c c0 00 53 6f 51 50 + 51 34 4f 5a 33 19 + 05 01 00 00 78 00 02 35 00 + 05 01 00 00 3c 00 02 29 00 + ]; + + qcom,mdss-dsi-off-command = [ + 05 01 00 00 14 00 02 28 00 + 05 01 00 00 78 00 02 10 00]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + qcom,mdss-dsi-h-sync-pulse = <0>; + qcom,mdss-dsi-qsync-on-commands = + [15 01 00 00 00 00 02 5a 01]; + qcom,mdss-dsi-qsync-on-commands-state = + "dsi_lp_mode"; + qcom,mdss-dsi-qsync-off-commands = + [15 01 00 00 00 00 02 5a 00]; + qcom,mdss-dsi-qsync-off-commands-state = + "dsi_lp_mode"; + qcom,mdss-dsi-lp1-command = [ + 05 01 00 00 00 00 02 39 00 + ]; + qcom,mdss-dsi-lp1-command-state = + "dsi_lp_mode"; + qcom,mdss-dsi-nolp-command = [ + 05 01 00 00 00 00 02 38 00 + ]; + qcom,mdss-dsi-nolp-command-state = + "dsi_lp_mode"; + qcom,compression-mode = "dsc"; + qcom,mdss-dsc-slice-height = <180>; + qcom,mdss-dsc-slice-width = <720>; + qcom,mdss-dsc-slice-per-pkt = <1>; + qcom,mdss-dsc-bit-per-component = <8>; + qcom,mdss-dsc-bit-per-pixel = <8>; + qcom,mdss-dsc-block-prediction-enable; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sw43404-amoled-dsc-wqhd-video.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sw43404-amoled-dsc-wqhd-video.dtsi new file mode 100644 index 000000000000..37c0dfcd7d75 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-sw43404-amoled-dsc-wqhd-video.dtsi @@ -0,0 +1,101 @@ +&mdss_mdp { + dsi_sw43404_amoled_video: qcom,mdss_dsi_sw43404_amoled_wqhd_video { + qcom,mdss-dsi-panel-name = + "sw43404 amoled video mode dsi boe panel with DSC"; + qcom,mdss-dsi-panel-type = "dsi_video_mode"; + + qcom,dsi-ctrl-num = <0>; + qcom,dsi-phy-num = <0>; + qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0"; + + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-bpp = <24>; + qcom,mdss-dsi-border-color = <0>; + qcom,mdss-dsi-traffic-mode = "non_burst_sync_event"; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>; + qcom,adjust-timer-wakeup-ms = <1>; + qcom,mdss-dsi-panel-hdr-enabled; + qcom,mdss-dsi-panel-hdr-color-primaries = <14500 15500 32000 + 17000 15500 30000 8000 3000>; + qcom,mdss-dsi-panel-peak-brightness = <4200000>; + qcom,mdss-dsi-panel-blackness-level = <3230>; + + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-width = <1440>; + qcom,mdss-dsi-panel-height = <2880>; + qcom,mdss-dsi-h-front-porch = <10>; + qcom,mdss-dsi-h-back-porch = <10>; + qcom,mdss-dsi-h-pulse-width = <12>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <10>; + qcom,mdss-dsi-v-front-porch = <10>; + qcom,mdss-dsi-v-pulse-width = <1>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-on-command = [ + 39 01 00 00 00 00 03 b0 a5 00 + 07 01 00 00 00 00 02 01 00 + 39 01 00 00 00 00 06 b2 00 5d 04 80 49 + 15 01 00 00 00 00 02 3d 10 + 15 01 00 00 00 00 02 36 00 + 15 01 00 00 00 00 02 55 08 + 39 01 00 00 00 00 09 f8 00 08 10 08 2d + 00 00 2d + 39 01 00 00 3c 00 03 51 00 00 + 05 01 00 00 50 00 02 11 00 + 39 01 00 00 00 00 03 b0 34 04 + 39 01 00 00 00 00 05 c1 00 00 00 46 + 39 01 00 00 00 00 03 b0 a5 00 + 0a 01 00 00 00 00 80 11 00 00 89 30 80 + 0B 40 05 A0 02 d0 02 D0 02 D0 02 00 + 02 68 00 20 4e a8 00 0A 00 0C 00 23 + 00 1c 18 00 10 F0 03 0C 20 00 06 0B + 0B 33 0E 1C 2A 38 46 54 62 69 70 77 + 79 7B 7D 7E 01 02 01 00 09 40 09 BE + 19 FC 19 FA 19 F8 1A 38 1A 78 1A B6 + 2A F6 2B 34 2B 74 3B 74 6B F4 00 00 + 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 + 39 01 00 00 00 00 03 b0 a5 00 + 15 01 00 00 00 00 02 e0 18 + 39 01 00 00 00 00 0c c0 00 53 6f 51 50 + 51 34 4f 5a 33 19 + 05 01 00 00 78 00 02 29 00 + ]; + qcom,mdss-dsi-off-command = [05 01 00 00 78 00 + 02 28 00 05 01 00 00 78 00 02 10 00]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + qcom,mdss-dsi-lp1-command = [ + 05 01 00 00 00 00 02 39 00 + ]; + qcom,mdss-dsi-lp1-command-state = + "dsi_lp_mode"; + qcom,mdss-dsi-nolp-command = [ + 05 01 00 00 00 00 02 38 00 + ]; + qcom,mdss-dsi-nolp-command-state = + "dsi_lp_mode"; + qcom,compression-mode = "dsc"; + qcom,mdss-dsc-slice-height = <180>; + qcom,mdss-dsc-slice-width = <720>; + qcom,mdss-dsc-slice-per-pkt = <2>; + qcom,mdss-dsc-bit-per-component = <8>; + qcom,mdss-dsc-bit-per-pixel = <8>; + qcom,mdss-dsc-block-prediction-enable; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-td4328-1080p-cmd.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-td4328-1080p-cmd.dtsi new file mode 100644 index 000000000000..476c34c01d34 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-td4328-1080p-cmd.dtsi @@ -0,0 +1,169 @@ +&mdss_mdp { + dsi_td4328_truly_cmd: qcom,mdss_dsi_td4328_truly_cmd { + qcom,mdss-dsi-panel-name = + "td4328 cmd mode dsi truly panel"; + qcom,mdss-dsi-panel-type = "dsi_cmd_mode"; + + qcom,dsi-ctrl-num = <0>; + qcom,dsi-phy-num = <0>; + qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0"; + + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-bpp = <24>; + qcom,mdss-dsi-color-order = "rgb_swap_rgb"; + qcom,mdss-dsi-underflow-color = <0xff>; + qcom,mdss-dsi-border-color = <0>; + qcom,mdss-dsi-h-sync-pulse = <0>; + qcom,mdss-dsi-traffic-mode = "non_burst_sync_event"; + qcom,mdss-dsi-lane-map = "lane_map_0123"; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,mdss-dsi-tx-eot-append; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + qcom,mdss-dsi-lp11-init; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; + qcom,mdss-dsi-bl-min-level = <1>; + qcom,mdss-dsi-bl-max-level = <4095>; + qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>; + qcom,mdss-dsi-te-pin-select = <1>; + qcom,mdss-dsi-wr-mem-start = <0x2c>; + qcom,mdss-dsi-wr-mem-continue = <0x3c>; + qcom,mdss-dsi-te-dcs-command = <1>; + qcom,mdss-dsi-te-check-enable; + qcom,mdss-dsi-te-using-te-pin; + + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-width = <1080>; + qcom,mdss-dsi-panel-height = <2160>; + qcom,mdss-dsi-h-front-porch = <70>; + qcom,mdss-dsi-h-back-porch = <40>; + qcom,mdss-dsi-h-pulse-width = <16>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <10>; + qcom,mdss-dsi-v-front-porch = <5>; + qcom,mdss-dsi-v-pulse-width = <2>; + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-panel-jitter = <0x4 0x1>; + qcom,mdss-dsi-on-command = [ + 29 01 00 00 00 00 02 B0 00 + 29 01 00 00 00 00 04 B3 00 00 06 + 29 01 00 00 00 00 02 B4 00 + 29 01 00 00 00 00 06 B6 33 DB 80 12 00 + 29 01 00 00 00 00 08 B8 57 3D 19 1E 0A + 50 50 + 29 01 00 00 00 00 08 B9 6F 3D 28 3C 14 + C8 C8 + 29 01 00 00 00 00 08 BA B5 33 41 64 23 + A0 A0 + 29 01 00 00 00 00 03 BB 14 14 + 29 01 00 00 00 00 03 BC 37 32 + 29 01 00 00 00 00 03 BD 64 32 + 29 01 00 00 00 00 02 BE 04 + 29 01 00 00 00 00 02 C0 00 + 29 01 00 00 00 00 2E C1 04 48 00 00 26 + 15 19 0B 63 D2 D9 9A 73 EF BD E7 5C + 6B 93 4D 22 18 8B 2A 41 00 00 00 00 + 00 00 00 00 00 40 02 22 1B 06 03 00 + 07 FF 00 01 + 29 01 00 00 00 00 18 C2 01 F8 70 08 68 + 08 0C 10 00 08 30 00 00 00 00 00 00 + 20 02 43 00 00 00 + 29 01 00 00 00 00 3F C3 87 D8 7D 87 D0 + 00 00 00 00 00 00 04 3A 00 00 00 04 + 44 00 00 01 01 03 28 00 01 00 01 00 + 00 19 00 0C 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 32 00 19 00 5A + 02 32 00 19 00 5A 02 40 00 + 29 01 00 00 00 00 15 C4 70 00 00 00 11 + 11 00 00 00 02 02 31 01 00 00 00 02 + 01 01 01 + 29 01 00 00 00 00 08 C5 08 00 00 00 00 + 70 00 + 29 01 00 00 00 00 40 C6 5B 2D 2D 07 54 + 07 54 01 02 01 02 07 07 00 00 07 07 + 0F 11 07 5B 00 5B 5B C2 C2 00 00 00 + 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 00 00 + 29 01 00 00 00 00 27 C7 01 1D 2E 41 4F + 5A 71 80 8B 95 45 4F 5C 71 7B 88 98 + A6 BE 01 1D 2E 41 4F 5A 71 80 8B 95 + 45 4F 5C 71 7B 88 98 A6 BE + 29 01 00 00 00 00 38 C8 00 00 00 00 00 + FC 00 00 00 00 00 FC 00 00 00 00 00 + FC 00 00 00 00 00 FC 00 00 00 00 00 + FC 00 00 00 00 00 FC 00 00 00 00 00 + FC 00 00 00 00 00 FC 00 00 00 00 00 + FC 00 + 29 01 00 00 00 00 14 C9 00 00 00 00 00 + FC 00 00 00 00 00 FC 00 00 00 00 00 + FC 00 + 29 01 00 00 00 00 2C CA 1C FC FC FC 00 + 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 + 29 01 00 00 00 00 1C CB FF FF FF FF 0F + 00 08 00 01 00 31 F0 40 08 00 00 00 + 00 00 00 00 00 00 00 00 00 00 + 29 01 00 00 00 00 02 CC 02 + 29 01 00 00 00 00 27 CD 10 80 37 C0 1A + 00 5C 02 19 90 11 88 D8 6C D8 6C 01 + 00 00 00 32 00 32 00 5D 02 32 32 01 + 33 00 33 00 5E 02 32 32 AF + 29 01 00 00 00 00 1A CE 5D 40 49 53 59 + 5E 63 68 6E 74 7E 8A 98 A8 BB D0 FF + 04 00 04 04 42 00 69 5A + 29 01 00 00 00 00 03 CF 4A 1D + 29 01 00 00 00 00 12 D0 33 57 D4 31 01 + 10 10 10 19 19 00 00 00 00 00 00 00 + 29 01 00 00 00 00 02 D1 00 + 29 01 00 00 00 00 20 D2 10 00 00 10 75 + 0F 03 25 20 00 00 00 00 00 00 00 00 + 04 00 00 00 00 00 00 00 00 00 00 00 + 00 00 + 29 01 00 00 00 00 17 D3 1B 3B BB 77 77 + 77 BB B3 33 00 00 6D 6E C7 C7 33 BB + F2 FD C6 0B 07 + 29 01 00 00 00 00 08 D4 00 00 00 00 00 + 00 00 + 29 01 00 00 00 00 08 D5 03 00 00 02 2B + 02 2B + 29 01 00 00 00 00 02 D6 01 + 29 01 00 00 00 00 22 D7 F6 FF 03 05 41 + 24 80 1F C7 1F 1B 00 0C 07 20 00 00 + 00 00 00 0C 00 1F 00 FC 00 00 AA 67 + 7E 5D 06 00 + 29 01 00 00 00 00 03 D9 20 14 + 29 01 00 00 00 00 05 DD 30 06 23 65 + 29 01 00 00 00 00 05 DE 00 3F FF 50 + 29 01 00 00 00 00 06 E7 00 00 00 46 61 + 29 01 00 00 00 00 02 EA 1F + 29 01 00 00 00 00 04 EE 41 51 00 + 29 01 00 00 00 00 03 F1 00 00 + 39 01 00 00 00 00 05 2A 00 00 04 37 + 39 01 00 00 00 00 05 2B 00 00 08 6F + 39 01 00 00 00 00 01 2C + 29 01 00 00 00 00 02 B0 00 + 39 01 00 00 00 00 02 51 FF + 39 01 00 00 00 00 02 53 0C + 39 01 00 00 00 00 02 55 00 + 15 01 00 00 00 00 02 35 00 + 05 01 00 00 96 00 01 11 + 05 01 00 00 32 00 01 29]; + qcom,mdss-dsi-off-command = [ + 05 01 00 00 32 00 02 28 00 + 05 01 00 00 96 00 02 10 00]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-td4328-1080p-video.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-td4328-1080p-video.dtsi new file mode 100644 index 000000000000..e9b7bac34504 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/dsi-panel-td4328-1080p-video.dtsi @@ -0,0 +1,164 @@ +&mdss_mdp { + dsi_td4328_truly_video: qcom,mdss_dsi_td4328_truly_video { + qcom,mdss-dsi-panel-name = + "td4328 video mode dsi truly panel"; + qcom,mdss-dsi-panel-type = "dsi_video_mode"; + + qcom,dsi-ctrl-num = <0>; + qcom,dsi-phy-num = <0>; + qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0"; + + qcom,mdss-dsi-virtual-channel-id = <0>; + qcom,mdss-dsi-stream = <0>; + qcom,mdss-dsi-h-left-border = <0>; + qcom,mdss-dsi-h-right-border = <0>; + qcom,mdss-dsi-v-top-border = <0>; + qcom,mdss-dsi-v-bottom-border = <0>; + qcom,mdss-dsi-bpp = <24>; + qcom,mdss-dsi-color-order = "rgb_swap_rgb"; + qcom,mdss-dsi-underflow-color = <0xff>; + qcom,mdss-dsi-border-color = <0>; + qcom,mdss-dsi-h-sync-pulse = <0>; + qcom,mdss-dsi-traffic-mode = "non_burst_sync_event"; + qcom,mdss-dsi-lane-map = "lane_map_0123"; + qcom,mdss-dsi-bllp-eof-power-mode; + qcom,mdss-dsi-bllp-power-mode; + qcom,mdss-dsi-tx-eot-append; + qcom,mdss-dsi-lane-0-state; + qcom,mdss-dsi-lane-1-state; + qcom,mdss-dsi-lane-2-state; + qcom,mdss-dsi-lane-3-state; + qcom,mdss-dsi-dma-trigger = "trigger_sw"; + qcom,mdss-dsi-mdp-trigger = "none"; + qcom,mdss-dsi-lp11-init; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; + qcom,mdss-dsi-bl-min-level = <1>; + qcom,mdss-dsi-bl-max-level = <4095>; + qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>; + + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-width = <1080>; + qcom,mdss-dsi-panel-height = <2160>; + qcom,mdss-dsi-h-front-porch = <70>; + qcom,mdss-dsi-h-back-porch = <40>; + qcom,mdss-dsi-h-pulse-width = <16>; + qcom,mdss-dsi-h-sync-skew = <0>; + qcom,mdss-dsi-v-back-porch = <10>; + qcom,mdss-dsi-v-front-porch = <5>; + qcom,mdss-dsi-v-pulse-width = <2>; + qcom,mdss-dsi-panel-framerate = <60>; + qcom,mdss-dsi-on-command = [ + 29 01 00 00 00 00 02 B0 00 + 29 01 00 00 00 00 04 B3 31 00 06 + 29 01 00 00 00 00 02 B4 00 + 29 01 00 00 00 00 06 B6 33 DB 80 12 00 + 29 01 00 00 00 00 08 B8 57 3D 19 1E 0A + 50 50 + 29 01 00 00 00 00 08 B9 6F 3D 28 3C 14 + C8 C8 + 29 01 00 00 00 00 08 BA B5 33 41 64 23 + A0 A0 + 29 01 00 00 00 00 03 BB 14 14 + 29 01 00 00 00 00 03 BC 37 32 + 29 01 00 00 00 00 03 BD 64 32 + 29 01 00 00 00 00 02 BE 04 + 29 01 00 00 00 00 02 C0 00 + 29 01 00 00 00 00 2E C1 04 48 00 00 26 + 15 19 0B 63 D2 D9 9A 73 EF BD E7 5C + 6B 93 4D 22 18 8B 2A 41 00 00 00 00 + 00 00 00 00 00 40 02 22 1B 06 03 00 + 07 FF 00 01 + 29 01 00 00 00 00 18 C2 01 F8 70 08 68 + 08 0C 10 00 08 30 00 00 00 00 00 00 + 20 02 43 00 00 00 + 29 01 00 00 00 00 3F C3 87 D8 7D 87 D0 + 00 00 00 00 00 00 04 3A 00 00 00 04 + 44 00 00 01 01 03 28 00 01 00 01 00 + 00 19 00 0C 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 32 00 19 00 5A + 02 32 00 19 00 5A 02 40 00 + 29 01 00 00 00 00 15 C4 70 00 00 00 11 + 11 00 00 00 02 02 31 01 00 00 00 02 + 01 01 01 + 29 01 00 00 00 00 08 C5 08 00 00 00 00 + 70 00 + 29 01 00 00 00 00 40 C6 5B 2D 2D 07 54 + 07 54 01 02 01 02 07 07 00 00 07 07 + 0F 11 07 5B 00 5B 5B C2 C2 00 00 00 + 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 00 00 + 29 01 00 00 00 00 27 C7 01 1D 2E 41 4F + 5A 71 80 8B 95 45 4F 5C 71 7B 88 98 + A6 BE 01 1D 2E 41 4F 5A 71 80 8B 95 + 45 4F 5C 71 7B 88 98 A6 BE + 29 01 00 00 00 00 38 C8 00 00 00 00 00 + FC 00 00 00 00 00 FC 00 00 00 00 00 + FC 00 00 00 00 00 FC 00 00 00 00 00 + FC 00 00 00 00 00 FC 00 00 00 00 00 + FC 00 00 00 00 00 FC 00 00 00 00 00 + FC 00 + 29 01 00 00 00 00 14 C9 00 00 00 00 00 + FC 00 00 00 00 00 FC 00 00 00 00 00 + FC 00 + 29 01 00 00 00 00 2C CA 1C FC FC FC 00 + 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 + 29 01 00 00 00 00 1C CB FF FF FF FF 0F + 00 08 00 01 00 31 F0 40 08 00 00 00 + 00 00 00 00 00 00 00 00 00 00 + 29 01 00 00 00 00 02 CC 02 + 29 01 00 00 00 00 27 CD 10 80 37 C0 1A + 00 5C 02 19 90 11 88 D8 6C D8 6C 01 + 00 00 00 32 00 32 00 5D 02 32 32 01 + 33 00 33 00 5E 02 32 32 AF + 29 01 00 00 00 00 1A CE 5D 40 49 53 59 + 5E 63 68 6E 74 7E 8A 98 A8 BB D0 FF + 04 00 04 04 42 00 69 5A + 29 01 00 00 00 00 03 CF 4A 1D + 29 01 00 00 00 00 12 D0 33 57 D4 31 01 + 10 10 10 19 19 00 00 00 00 00 00 00 + 29 01 00 00 00 00 02 D1 00 + 29 01 00 00 00 00 20 D2 10 00 00 10 75 + 0F 03 25 20 00 00 00 00 00 00 00 00 + 04 00 00 00 00 00 00 00 00 00 00 00 + 00 00 + 29 01 00 00 00 00 17 D3 1B 3B BB 77 77 + 77 BB B3 33 00 00 6D 6E DB DB 33 BB + F2 FD C6 0B 07 + 29 01 00 00 00 00 08 D4 00 00 00 00 00 + 00 00 + 29 01 00 00 00 00 08 D5 03 00 00 02 40 + 02 40 + 29 01 00 00 00 00 02 D6 01 + 29 01 00 00 00 00 22 D7 F6 FF 03 05 41 + 24 80 1F C7 1F 1B 00 0C 07 20 00 00 + 00 00 00 0C 00 1F 00 FC 00 00 AA 67 + 7E 5D 06 00 + 29 01 00 00 00 00 03 D9 20 14 + 29 01 00 00 00 00 05 DD 30 06 23 65 + 29 01 00 00 00 00 05 DE 00 3F FF 90 + 29 01 00 00 00 00 06 E7 00 00 00 46 61 + 29 01 00 00 00 00 02 EA 1F + 29 01 00 00 00 00 04 EE 41 51 00 + 29 01 00 00 00 00 03 F1 00 00 + 39 01 00 00 00 00 05 2A 00 00 04 37 + 39 01 00 00 00 00 05 2B 00 00 08 6F + 39 01 00 00 00 00 01 2C + 39 01 00 00 00 00 02 51 FF + 39 01 00 00 00 00 02 53 0C + 39 01 00 00 00 00 02 55 00 + 05 01 00 00 96 00 01 11 + 05 01 00 00 32 00 01 29]; + qcom,mdss-dsi-off-command = [ + 05 01 00 00 32 00 02 28 00 + 05 01 00 00 96 00 02 10 00]; + qcom,mdss-dsi-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-off-command-state = "dsi_hs_mode"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/kona-sde-display-cdp-lcd.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/kona-sde-display-cdp-lcd.dtsi new file mode 100644 index 000000000000..a7d85dfd9194 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/kona-sde-display-cdp-lcd.dtsi @@ -0,0 +1,36 @@ +&dsi_sharp_4k_dsc_cmd { + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; + /delete-property/ qcom,platform-en-gpio; +}; + +&dsi_sharp_4k_dsc_video { + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; + /delete-property/ qcom,platform-en-gpio; +}; + +&dsi_sharp_1080_cmd { + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; +}; + +&dsi_dual_nt35597_truly_cmd { + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; +}; + +&dsi_dual_nt35597_truly_video { + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; +}; + +&dsi_nt35695b_truly_fhd_cmd { + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; +}; + +&dsi_nt35695b_truly_fhd_video { + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; +}; + +&sde_dsi { + /delete-property/ avdd-supply; + lab-supply = <&lcdb_ldo_vreg>; + ibb-supply = <&lcdb_ncp_vreg>; + qcom,dsi-default-panel = <&dsi_sharp_4k_dsc_cmd>; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/kona-sde-display-cdp.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/kona-sde-display-cdp.dtsi new file mode 100644 index 000000000000..fadbce641428 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/kona-sde-display-cdp.dtsi @@ -0,0 +1,152 @@ +#include "kona-sde-display.dtsi" + +&dsi_sw43404_amoled_cmd { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,mdss-dsi-bl-min-level = <1>; + qcom,mdss-dsi-bl-max-level = <1023>; + qcom,mdss-brightness-max-level = <255>; + qcom,platform-te-gpio = <&tlmm 66 0>; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_sw43404_amoled_video { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,mdss-dsi-bl-min-level = <1>; + qcom,mdss-dsi-bl-max-level = <1023>; + qcom,mdss-brightness-max-level = <255>; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_sw43404_amoled_fhd_plus_cmd { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,mdss-dsi-bl-min-level = <1>; + qcom,mdss-dsi-bl-max-level = <1023>; + qcom,mdss-brightness-max-level = <255>; + qcom,platform-te-gpio = <&tlmm 66 0>; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_sharp_4k_dsc_cmd { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply_avdd>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_external"; + qcom,mdss-dsi-bl-min-level = <1>; + qcom,mdss-dsi-bl-max-level = <4095>; + qcom,platform-te-gpio = <&tlmm 66 0>; + qcom,platform-reset-gpio = <&tlmm 75 0>; + qcom,platform-en-gpio = <&tlmm 60 0>; +}; + +&dsi_sharp_4k_dsc_video { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply_avdd>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_external"; + qcom,mdss-dsi-bl-min-level = <1>; + qcom,mdss-dsi-bl-max-level = <4095>; + qcom,platform-reset-gpio = <&tlmm 75 0>; + qcom,platform-en-gpio = <&tlmm 60 0>; +}; + +&dsi_sharp_1080_cmd { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply_avdd>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_external"; + qcom,mdss-dsi-bl-min-level = <1>; + qcom,mdss-dsi-bl-max-level = <4095>; + qcom,platform-te-gpio = <&tlmm 66 0>; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_dual_nt35597_truly_cmd { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply_avdd>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_external"; + qcom,mdss-dsi-bl-min-level = <1>; + qcom,mdss-dsi-bl-max-level = <4095>; + qcom,platform-te-gpio = <&tlmm 66 0>; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_dual_nt35597_truly_video { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply_avdd>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_external"; + qcom,mdss-dsi-bl-min-level = <1>; + qcom,mdss-dsi-bl-max-level = <4095>; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_nt35695b_truly_fhd_cmd { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply_avdd>; + qcom,panel-sec-supply-entries = <&dsi_panel_pwr_supply_avdd>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_external"; + qcom,mdss-dsi-sec-bl-pmic-control-type = "bl_ctrl_external"; + qcom,mdss-dsi-bl-min-level = <1>; + qcom,mdss-dsi-bl-max-level = <4095>; + qcom,platform-te-gpio = <&tlmm 66 0>; + qcom,platform-reset-gpio = <&tlmm 75 0>; + qcom,platform-sec-reset-gpio = <&tlmm 128 0>; +}; + +&dsi_nt35695b_truly_fhd_video { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply_avdd>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_external"; + qcom,mdss-dsi-bl-min-level = <1>; + qcom,mdss-dsi-bl-max-level = <4095>; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_sim_cmd { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_sim_vid { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_sim_dsc_375_cmd { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_sim_dsc_10b_cmd { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_dual_sim_cmd { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_dual_sim_vid { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_dual_sim_dsc_375_cmd { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_sim_sec_hd_cmd { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,panel-sec-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,mdss-dsi-sec-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,mdss-dsi-bl-min-level = <1>; + qcom,mdss-dsi-bl-max-level = <1023>; + qcom,platform-reset-gpio = <&tlmm 75 0>; + qcom,platform-sec-reset-gpio = <&tlmm 128 0>; +}; + +&sde_dsi { + qcom,dsi-default-panel = <&dsi_sw43404_amoled_cmd>; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/kona-sde-display-mtp.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/kona-sde-display-mtp.dtsi new file mode 100644 index 000000000000..b81aad8801d0 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/kona-sde-display-mtp.dtsi @@ -0,0 +1,87 @@ +#include "kona-sde-display.dtsi" + +&dsi_sw43404_amoled_cmd { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,mdss-dsi-bl-min-level = <1>; + qcom,mdss-dsi-bl-max-level = <1023>; + qcom,mdss-brightness-max-level = <255>; + qcom,platform-te-gpio = <&tlmm 66 0>; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_sw43404_amoled_video { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,mdss-dsi-bl-min-level = <1>; + qcom,mdss-dsi-bl-max-level = <1023>; + qcom,mdss-brightness-max-level = <255>; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_sw43404_amoled_fhd_plus_cmd { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,mdss-dsi-bl-min-level = <1>; + qcom,mdss-dsi-bl-max-level = <1023>; + qcom,mdss-brightness-max-level = <255>; + qcom,platform-te-gpio = <&tlmm 66 0>; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_sim_cmd { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_sim_vid { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_sim_dsc_375_cmd { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_sim_dsc_10b_cmd { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_dual_sim_cmd { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_dual_sim_vid { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_dual_sim_dsc_375_cmd { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_sim_sec_hd_cmd { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,panel-sec-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,mdss-dsi-sec-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,mdss-dsi-bl-min-level = <1>; + qcom,mdss-dsi-bl-max-level = <1023>; + qcom,platform-reset-gpio = <&tlmm 75 0>; + qcom,platform-sec-reset-gpio = <&tlmm 128 0>; +}; + +&sde_dsi { + qcom,dsi-default-panel = <&dsi_sw43404_amoled_cmd>; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/kona-sde-display-qrd.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/kona-sde-display-qrd.dtsi new file mode 100644 index 000000000000..1f6e32ac60f8 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/kona-sde-display-qrd.dtsi @@ -0,0 +1,76 @@ +#include "kona-sde-display.dtsi" + +&dsi_sw43404_amoled_cmd { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,mdss-dsi-bl-min-level = <1>; + qcom,mdss-dsi-bl-max-level = <1023>; + qcom,mdss-brightness-max-level = <255>; + qcom,platform-te-gpio = <&tlmm 66 0>; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_sw43404_amoled_video { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,mdss-dsi-bl-min-level = <1>; + qcom,mdss-dsi-bl-max-level = <1023>; + qcom,mdss-brightness-max-level = <255>; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_sw43404_amoled_fhd_plus_cmd { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,mdss-dsi-bl-min-level = <1>; + qcom,mdss-dsi-bl-max-level = <1023>; + qcom,mdss-brightness-max-level = <255>; + qcom,platform-te-gpio = <&tlmm 66 0>; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_sim_cmd { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_sim_vid { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_sim_dsc_375_cmd { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_sim_dsc_10b_cmd { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_dual_sim_cmd { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_dual_sim_vid { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&dsi_dual_sim_dsc_375_cmd { + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; + qcom,platform-reset-gpio = <&tlmm 75 0>; +}; + +&sde_dsi { + qcom,dsi-default-panel = <&dsi_sw43404_amoled_cmd>; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/kona-sde-display-rumi.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/kona-sde-display-rumi.dtsi new file mode 100644 index 000000000000..3eb83e40a9c0 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/kona-sde-display-rumi.dtsi @@ -0,0 +1 @@ +#include "kona-sde-display.dtsi" diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/kona-sde-display.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/kona-sde-display.dtsi new file mode 100644 index 000000000000..6257b55c4e1d --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/kona-sde-display.dtsi @@ -0,0 +1,528 @@ +#include "dsi-panel-sw43404-amoled-dsc-wqhd-cmd.dtsi" +#include "dsi-panel-sw43404-amoled-dsc-wqhd-video.dtsi" +#include "dsi-panel-sw43404-amoled-dsc-fhd-plus-cmd.dtsi" +#include "dsi-panel-sharp-dsc-4k-cmd.dtsi" +#include "dsi-panel-sharp-dsc-4k-video.dtsi" +#include "dsi-panel-sharp-1080p-cmd.dtsi" +#include "dsi-panel-nt35597-truly-dualmipi-wqxga-cmd.dtsi" +#include "dsi-panel-nt35597-truly-dualmipi-wqxga-video.dtsi" +#include "dsi-panel-nt35695b-truly-fhd-cmd.dtsi" +#include "dsi-panel-nt35695b-truly-fhd-video.dtsi" +#include "dsi-panel-sim-cmd.dtsi" +#include "dsi-panel-sim-video.dtsi" +#include "dsi-panel-sim-dsc375-cmd.dtsi" +#include "dsi-panel-sim-dsc-10bit-cmd.dtsi" +#include "dsi-panel-sim-dualmipi-cmd.dtsi" +#include "dsi-panel-sim-dualmipi-video.dtsi" +#include "dsi-panel-sim-dualmipi-dsc375-cmd.dtsi" +#include "dsi-panel-sim-sec-hd-cmd.dtsi" +#include <dt-bindings/clock/mdss-7nm-pll-clk.h> + +&tlmm { + display_panel_avdd_default: display_panel_avdd_default { + mux { + pins = "gpio61"; + function = "gpio"; + }; + + config { + pins = "gpio61"; + drive-strength = <8>; + bias-disable = <0>; + output-high; + }; + }; +}; + +&soc { + ext_disp: qcom,msm-ext-disp { + compatible = "qcom,msm-ext-disp"; + + ext_disp_audio_codec: qcom,msm-ext-disp-audio-codec-rx { + compatible = "qcom,msm-ext-disp-audio-codec-rx"; + }; + }; + + dsi_panel_pwr_supply: dsi_panel_pwr_supply { + #address-cells = <1>; + #size-cells = <0>; + + qcom,panel-supply-entry@0 { + reg = <0>; + qcom,supply-name = "vddio"; + qcom,supply-min-voltage = <1800000>; + qcom,supply-max-voltage = <1800000>; + qcom,supply-enable-load = <62000>; + qcom,supply-disable-load = <80>; + qcom,supply-post-on-sleep = <20>; + }; + + qcom,panel-supply-entry@1 { + reg = <1>; + qcom,supply-name = "vdd"; + qcom,supply-min-voltage = <3300000>; + qcom,supply-max-voltage = <3300000>; + qcom,supply-enable-load = <857000>; + qcom,supply-disable-load = <0>; + qcom,supply-post-on-sleep = <0>; + }; + }; + + dsi_panel_pwr_supply_avdd: dsi_panel_pwr_supply_avdd { + #address-cells = <1>; + #size-cells = <0>; + + qcom,panel-supply-entry@0 { + reg = <0>; + qcom,supply-name = "vddio"; + qcom,supply-min-voltage = <1800000>; + qcom,supply-max-voltage = <1800000>; + qcom,supply-enable-load = <62000>; + qcom,supply-disable-load = <80>; + qcom,supply-post-on-sleep = <20>; + }; + + qcom,panel-supply-entry@1 { + reg = <1>; + qcom,supply-name = "avdd"; + qcom,supply-min-voltage = <4600000>; + qcom,supply-max-voltage = <6000000>; + qcom,supply-enable-load = <100000>; + qcom,supply-disable-load = <100>; + }; + }; + + display_panel_avdd: display_gpio_regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "display_panel_avdd"; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + regulator-enable-ramp-delay = <233>; + gpio = <&tlmm 61 0>; + enable-active-high; + regulator-boot-on; + pinctrl-names = "default"; + pinctrl-0 = <&display_panel_avdd_default>; + }; + + sde_dsi: qcom,dsi-display-primary { + compatible = "qcom,dsi-display"; + label = "primary"; + + qcom,dsi-ctrl = <&mdss_dsi0 &mdss_dsi1>; + qcom,dsi-phy = <&mdss_dsi_phy0 &mdss_dsi_phy1>; + + clocks = <&mdss_dsi0_pll BYTECLK_MUX_0_CLK>, + <&mdss_dsi0_pll PCLK_MUX_0_CLK>, + <&mdss_dsi1_pll BYTECLK_MUX_1_CLK>, + <&mdss_dsi1_pll PCLK_MUX_1_CLK>; + clock-names = "src_byte_clk0", "src_pixel_clk0", + "src_byte_clk1", "src_pixel_clk1"; + + pinctrl-names = "panel_active", "panel_suspend"; + pinctrl-0 = <&sde_dsi_active &sde_te_active>; + pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>; + + qcom,platform-te-gpio = <&tlmm 66 0>; + qcom,panel-te-source = <0>; + + vddio-supply = <&pm8150_l14>; + vdd-supply = <&pm8150a_l11>; + avdd-supply = <&display_panel_avdd>; + + qcom,mdp = <&mdss_mdp>; + qcom,dsi-default-panel = <&dsi_sw43404_amoled_cmd>; + }; + + sde_dsi1: qcom,dsi-display-secondary { + compatible = "qcom,dsi-display"; + label = "secondary"; + + qcom,dsi-ctrl = <&mdss_dsi0 &mdss_dsi1>; + qcom,dsi-phy = <&mdss_dsi_phy0 &mdss_dsi_phy1>; + + clocks = <&mdss_dsi0_pll BYTECLK_MUX_0_CLK>, + <&mdss_dsi0_pll PCLK_MUX_0_CLK>, + <&mdss_dsi1_pll BYTECLK_MUX_1_CLK>, + <&mdss_dsi1_pll PCLK_MUX_1_CLK>; + clock-names = "src_byte_clk0", "src_pixel_clk0", + "src_byte_clk1", "src_pixel_clk1"; + + pinctrl-names = "panel_active", "panel_suspend"; + pinctrl-0 = <&sde_dsi1_active &sde_te1_active>; + pinctrl-1 = <&sde_dsi1_suspend &sde_te1_suspend>; + + qcom,platform-te-gpio = <&tlmm 67 0>; + qcom,panel-te-source = <1>; + + vddio-supply = <&pm8150_l14>; + vdd-supply = <&pm8150a_l11>; + avdd-supply = <&display_panel_avdd>; + + qcom,mdp = <&mdss_mdp>; + }; + + sde_wb: qcom,wb-display@0 { + compatible = "qcom,wb-display"; + cell-index = <0>; + label = "wb_display"; + }; +}; + +&sde_dp { + qcom,dp-usbpd-detection = <&pm8150b_pdphy>; + qcom,ext-disp = <&ext_disp>; + qcom,dp-aux-switch = <&fsa4480>; + + qcom,usbplug-cc-gpio = <&tlmm 65 0>; + + pinctrl-names = "mdss_dp_active", "mdss_dp_sleep"; + pinctrl-0 = <&sde_dp_usbplug_cc_active>; + pinctrl-1 = <&sde_dp_usbplug_cc_suspend>; +}; + +&mdss_mdp { + connectors = <&sde_dp &sde_wb &sde_dsi &sde_dsi1 &sde_rscc>; +}; + +/* PHY TIMINGS REVISION W */ +&dsi_sw43404_amoled_cmd { + qcom,ulps-enabled; + qcom,esd-check-enabled; + qcom,mdss-dsi-panel-status-check-mode = "reg_read"; + qcom,mdss-dsi-panel-status-command = [06 01 00 01 00 00 01 0a]; + qcom,mdss-dsi-panel-status-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-panel-status-value = <0x9c>; + qcom,mdss-dsi-panel-status-read-length = <1>; + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-phy-timings = [00 14 05 05 1f 1e 05 + 05 03 02 04 00 12 15]; + qcom,display-topology = <2 2 1>; + qcom,default-topology-index = <0>; + qcom,partial-update-enabled = "single_roi"; + qcom,panel-roi-alignment = <720 180 180 180 1440 180>; + }; + }; +}; + +&dsi_sw43404_amoled_video { + qcom,esd-check-enabled; + qcom,mdss-dsi-panel-status-check-mode = "reg_read"; + qcom,mdss-dsi-panel-status-command = [06 01 00 01 00 00 01 0a]; + qcom,mdss-dsi-panel-status-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-panel-status-value = <0x9c>; + qcom,mdss-dsi-panel-status-read-length = <1>; + qcom,dsi-supported-dfps-list = <60 57 55>; + qcom,mdss-dsi-pan-enable-dynamic-fps; + qcom,mdss-dsi-pan-fps-update = "dfps_immediate_porch_mode_hfp"; + qcom,mdss-dsi-min-refresh-rate = <55>; + qcom,mdss-dsi-max-refresh-rate = <60>; + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-phy-timings = [00 14 05 05 1f 1e 05 + 05 03 02 04 00 12 15]; + qcom,display-topology = <2 2 1>; + qcom,default-topology-index = <0>; + }; + }; +}; + +&dsi_sw43404_amoled_fhd_plus_cmd { + qcom,ulps-enabled; + qcom,esd-check-enabled; + qcom,mdss-dsi-panel-status-check-mode = "reg_read"; + qcom,mdss-dsi-panel-status-command = [06 01 00 01 00 00 01 0a]; + qcom,mdss-dsi-panel-status-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-panel-status-value = <0x9c>; + qcom,mdss-dsi-panel-status-read-length = <1>; + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-phy-timings = [00 12 04 04 1e 1e 04 + 05 02 03 04 00 11 14]; + qcom,display-topology = <2 2 1>; + qcom,default-topology-index = <0>; + qcom,partial-update-enabled = "single_roi"; + qcom,panel-roi-alignment = <540 270 270 270 1080 270>; + }; + }; +}; + +&dsi_sharp_4k_dsc_cmd { + qcom,ulps-enabled; + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-phy-timings = [00 1e 08 07 24 22 08 + 08 05 02 04 00 19 18]; + qcom,display-topology = <2 2 2>; + qcom,default-topology-index = <0>; + }; + }; +}; + +&dsi_sharp_4k_dsc_video { + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-phy-timings = [00 1e 08 07 24 22 08 + 08 05 02 04 00 19 18]; + qcom,display-topology = <2 2 2>; + qcom,default-topology-index = <0>; + }; + }; +}; + +&dsi_sharp_1080_cmd { + qcom,ulps-enabled; + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-phy-timings = [00 1E 08 08 24 22 08 + 08 05 02 04 00 19 18]; + qcom,display-topology = <1 0 1>; + qcom,default-topology-index = <0>; + qcom,mdss-dsi-panel-clockrate = <900000000>; + }; + }; +}; + +&dsi_dual_nt35597_truly_cmd { + qcom,ulps-enabled; + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-phy-timings = [00 1c 08 07 23 22 07 + 07 05 02 04 00 18 17]; + qcom,display-topology = <2 0 2>, + <1 0 2>; + qcom,default-topology-index = <0>; + }; + }; +}; + +&dsi_dual_nt35597_truly_video { + qcom,mdss-dsi-min-refresh-rate = <53>; + qcom,mdss-dsi-max-refresh-rate = <60>; + qcom,mdss-dsi-pan-enable-dynamic-fps; + qcom,mdss-dsi-pan-fps-update = "dfps_immediate_porch_mode_vfp"; + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-phy-timings = [00 1c 08 07 23 22 07 + 07 05 02 04 00 18 17]; + qcom,display-topology = <2 0 2>, + <1 0 2>; + qcom,default-topology-index = <0>; + }; + }; +}; + +&dsi_nt35695b_truly_fhd_cmd { + qcom,ulps-enabled; + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-phy-timings = [00 1e 08 07 24 22 + 08 08 05 02 04 00 19 17]; + qcom,display-topology = <1 0 1>; + qcom,default-topology-index = <0>; + }; + }; +}; + +&dsi_nt35695b_truly_fhd_video { + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-phy-timings = [00 1e 08 07 24 22 + 08 08 05 02 04 00 19 17]; + qcom,display-topology = <1 0 1>; + qcom,default-topology-index = <0>; + }; + }; +}; + +&dsi_sim_cmd { + qcom,ulps-enabled; + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-phy-timings = [00 1c 08 07 23 22 07 + 07 05 02 04 00 18 17]; + qcom,display-topology = <1 1 1>, + <2 2 1>; + qcom,default-topology-index = <1>; + }; + + timing@1 { + qcom,mdss-dsi-panel-phy-timings = [00 1c 08 07 23 22 07 + 07 05 02 04 00 18 17]; + qcom,display-topology = <1 1 1>, + <2 2 1>; + qcom,default-topology-index = <1>; + }; + + timing@2 { + qcom,mdss-dsi-panel-phy-timings = [00 1c 08 07 23 22 07 + 07 05 02 04 00 18 17]; + qcom,display-topology = <1 1 1>, + <2 2 1>; + qcom,default-topology-index = <1>; + qcom,panel-roi-alignment = <720 40 720 40 720 40>; + qcom,partial-update-enabled = "single_roi"; + }; + + timing@3 { + qcom,mdss-dsi-panel-phy-timings = [00 1c 08 07 23 22 07 + 07 05 02 04 00 18 17]; + qcom,display-topology = <1 1 1>, + <2 2 1>; + qcom,default-topology-index = <1>; + qcom,panel-roi-alignment = <540 40 540 40 540 40>; + qcom,partial-update-enabled = "single_roi"; + }; + + timing@4 { + qcom,mdss-dsi-panel-phy-timings = [00 1c 08 07 23 22 07 + 07 05 02 04 00 18 17]; + qcom,display-topology = <1 1 1>, + <2 2 1>; + qcom,default-topology-index = <1>; + qcom,panel-roi-alignment = <360 40 360 40 360 40>; + qcom,partial-update-enabled = "single_roi"; + }; + }; +}; + +&dsi_sim_vid { + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-phy-timings = [00 1c 08 07 23 22 07 + 07 05 02 04 00 18 17]; + qcom,display-topology = <1 0 1>, + <2 0 1>; + qcom,default-topology-index = <0>; + }; + }; +}; + +&dsi_sim_dsc_375_cmd { + qcom,ulps-enabled; + qcom,mdss-dsi-display-timings { + timing@0 { /* 1080p */ + qcom,mdss-dsi-panel-phy-timings = [00 1c 08 07 23 22 07 + 07 05 02 04 00 18 17]; + qcom,display-topology = <1 1 1>; + qcom,default-topology-index = <0>; + }; + + timing@1 { /* qhd */ + qcom,mdss-dsi-panel-phy-timings = [00 1e 08 07 24 22 08 + 08 05 02 04 00 19 18]; + qcom,display-topology = <1 1 1>, + <2 2 1>, /* dsc merge */ + <2 1 1>; /* 3d mux */ + qcom,default-topology-index = <0>; + }; + }; +}; + +&dsi_sim_dsc_10b_cmd { + qcom,ulps-enabled; + qcom,mdss-dsi-display-timings { + timing@0 { /* QHD 60fps */ + qcom,mdss-dsi-panel-phy-timings = [00 1c 08 07 23 22 07 + 07 05 02 04 00 18 17]; + qcom,display-topology = <1 1 1>; + qcom,default-topology-index = <0>; + }; + + timing@1 { /* 1080 60fps */ + qcom,mdss-dsi-panel-phy-timings = [00 1e 08 07 24 22 08 + 08 05 02 04 00 19 18]; + qcom,display-topology = <1 1 1>, + <2 2 1>, /* dsc merge */ + <2 1 1>; /* 3d mux */ + qcom,default-topology-index = <0>; + }; + + timing@2 { /* QHD 90fps */ + qcom,mdss-dsi-panel-phy-timings = [00 1c 08 07 23 22 07 + 07 05 02 04 00 18 17]; + qcom,display-topology = <1 1 1>; + qcom,default-topology-index = <0>; + }; + }; +}; + +&dsi_dual_sim_cmd { + qcom,ulps-enabled; + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-phy-timings = [00 24 09 09 26 24 09 + 09 06 02 04 00 18 17]; + qcom,display-topology = <2 0 2>; + qcom,default-topology-index = <0>; + }; + + timing@1 { + qcom,mdss-dsi-panel-phy-timings = [00 1c 08 07 23 22 07 + 07 05 02 04 00 18 17]; + qcom,display-topology = <2 0 2>, + <1 0 2>; + qcom,default-topology-index = <0>; + }; + + timing@2 { + qcom,mdss-dsi-panel-phy-timings = [00 1e 08 07 24 22 08 + 08 05 02 04 00 19 18]; + qcom,display-topology = <2 0 2>; + qcom,default-topology-index = <0>; + }; + }; +}; + +&dsi_dual_sim_vid { + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-phy-timings = [00 1c 08 07 23 22 07 + 07 05 02 04 00 18 17]; + qcom,display-topology = <2 0 2>, + <1 0 2>; + qcom,default-topology-index = <0>; + }; + }; +}; + +&dsi_dual_sim_dsc_375_cmd { + qcom,ulps-enabled; + qcom,mdss-dsi-display-timings { + timing@0 { /* qhd */ + qcom,mdss-dsi-panel-phy-timings = [00 1c 08 07 23 22 07 + 07 05 02 04 00 18 17]; + qcom,display-topology = <2 2 2>; + qcom,default-topology-index = <0>; + }; + + timing@1 { /* 4k */ + qcom,mdss-dsi-panel-phy-timings = [00 1e 08 07 24 22 08 + 08 05 02 04 00 19 18]; + qcom,display-topology = <2 2 2>; + qcom,default-topology-index = <0>; + }; + + timing@2 { /* 5k */ + qcom,mdss-dsi-panel-phy-timings = [00 46 13 14 33 30 12 + 14 0e 02 04 00 37 22]; + qcom,display-topology = <2 2 2>; + qcom,default-topology-index = <0>; + }; + }; +}; + +&dsi_sim_sec_hd_cmd { + qcom,ulps-enabled; + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-phy-timings = [00 1e 08 07 24 22 + 08 08 05 02 04 00 19 17]; + qcom,display-topology = <1 0 1>; + qcom,default-topology-index = <0>; + qcom,panel-roi-alignment = <720 40 720 40 720 40>; + qcom,partial-update-enabled = "single_roi"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/kona-sde-pll.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/kona-sde-pll.dtsi new file mode 100644 index 000000000000..e6bda66f50ac --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/kona-sde-pll.dtsi @@ -0,0 +1,82 @@ +&soc { + mdss_dsi0_pll: qcom,mdss_dsi_pll@ae94900 { + compatible = "qcom,mdss_dsi_pll_7nm_v4_1"; + label = "MDSS DSI 0 PLL"; + cell-index = <0>; + #clock-cells = <1>; + reg = <0xae94900 0x260>, + <0xae94400 0x800>, + <0xaf03000 0x8>; + reg-names = "pll_base", "phy_base", "gdsc_base"; + clocks = <&clock_dispcc DISP_CC_MDSS_AHB_CLK>; + clock-names = "iface_clk"; + clock-rate = <0>; + gdsc-supply = <&mdss_core_gdsc>; + qcom,dsi-pll-ssc-en; + qcom,dsi-pll-ssc-mode = "down-spread"; + qcom,platform-supply-entries { + #address-cells = <1>; + #size-cells = <0>; + qcom,platform-supply-entry@0 { + reg = <0>; + qcom,supply-name = "gdsc"; + qcom,supply-min-voltage = <0>; + qcom,supply-max-voltage = <0>; + qcom,supply-enable-load = <0>; + qcom,supply-disable-load = <0>; + }; + }; + }; + + mdss_dsi1_pll: qcom,mdss_dsi_pll@ae96900 { + compatible = "qcom,mdss_dsi_pll_7nm_v4_1"; + label = "MDSS DSI 1 PLL"; + cell-index = <1>; + #clock-cells = <1>; + reg = <0xae96900 0x260>, + <0xae96400 0x800>, + <0xaf03000 0x8>; + reg-names = "pll_base", "phy_base", "gdsc_base"; + clocks = <&clock_dispcc DISP_CC_MDSS_AHB_CLK>; + clock-names = "iface_clk"; + clock-rate = <0>; + gdsc-supply = <&mdss_core_gdsc>; + qcom,dsi-pll-ssc-en; + qcom,dsi-pll-ssc-mode = "down-spread"; + qcom,platform-supply-entries { + #address-cells = <1>; + #size-cells = <0>; + qcom,platform-supply-entry@0 { + reg = <0>; + qcom,supply-name = "gdsc"; + qcom,supply-min-voltage = <0>; + qcom,supply-max-voltage = <0>; + qcom,supply-enable-load = <0>; + qcom,supply-disable-load = <0>; + }; + }; + }; + + mdss_dp_pll: qcom,mdss_dp_pll@c011000 { + compatible = "qcom,mdss_dp_pll_7nm"; + label = "MDSS DP PLL"; + cell-index = <0>; + #clock-cells = <1>; + + reg = <0x088ea000 0x200>, + <0x088eaa00 0x200>, + <0x088ea200 0x200>, + <0x088ea600 0x200>, + <0xaf03000 0x8>; + reg-names = "pll_base", "phy_base", "ln_tx0_base", + "ln_tx1_base", "gdsc_base"; + + clocks = <&clock_dispcc DISP_CC_MDSS_AHB_CLK>, + <&clock_rpmh RPMH_CXO_CLK>, + <&clock_gcc GCC_DISP_AHB_CLK>, + <&clock_gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "iface_clk", "ref_clk_src", + "gcc_iface", "pipe_clk"; + clock-rate = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/vendor/qcom/display/display/kona-sde.dtsi b/arch/arm64/boot/dts/vendor/qcom/display/display/kona-sde.dtsi new file mode 100644 index 000000000000..d6a849eb4925 --- /dev/null +++ b/arch/arm64/boot/dts/vendor/qcom/display/display/kona-sde.dtsi @@ -0,0 +1,688 @@ +#include <dt-bindings/clock/mdss-7nm-pll-clk.h> + +&soc { + mdss_mdp: qcom,mdss_mdp@ae00000 { + compatible = "qcom,sde-kms"; + reg = <0x0ae00000 0x84208>, + <0x0aeb0000 0x2008>, + <0x0aeac000 0x214>, + <0x0ae8f000 0x02c>, + <0x0af50000 0x038>; + reg-names = "mdp_phys", + "vbif_phys", + "regdma_phys", + "sid_phys", + "swfuse_phys"; + + clocks = + <&clock_gcc GCC_DISP_AHB_CLK>, + <&clock_gcc GCC_DISP_HF_AXI_CLK>, + <&clock_gcc GCC_DISP_SF_AXI_CLK>, + <&clock_dispcc DISP_CC_MDSS_AHB_CLK>, + <&clock_dispcc DISP_CC_MDSS_MDP_CLK>, + <&clock_dispcc DISP_CC_MDSS_VSYNC_CLK>, + <&clock_dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&clock_dispcc DISP_CC_MDSS_ROT_CLK>; + clock-names = "gcc_iface", "gcc_bus", "gcc_nrt_bus", + "iface_clk", "core_clk", "vsync_clk", + "lut_clk", "rot_clk"; + clock-rate = <0 0 0 0 300000000 19200000 300000000 19200000>; + clock-max-rate = <0 0 0 0 460000000 19200000 460000000 + 460000000>; + + mmcx-supply = <&VDD_MMCX_LEVEL>; + + /* interrupt config */ + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + #power-domain-cells = <0>; + + /* hw blocks */ + qcom,sde-off = <0x1000>; + qcom,sde-len = <0x494>; + + qcom,sde-ctl-off = <0x2000 0x2200 0x2400 + 0x2600 0x2800 0x2a00>; + qcom,sde-ctl-size = <0x1dc>; + qcom,sde-ctl-display-pref = "primary", "none", "none", + "none", "none"; + + qcom,sde-mixer-off = <0x45000 0x46000 0x47000 + 0x48000 0x49000 0x4a000>; + qcom,sde-mixer-size = <0x320>; + qcom,sde-mixer-display-pref = "primary", "primary", "none", + "none", "none", "none"; + + qcom,sde-mixer-cwb-pref = "none", "none", "cwb", + "cwb", "cwb", "cwb"; + + qcom,sde-dspp-top-off = <0x1300>; + qcom,sde-dspp-top-size = <0x80>; + qcom,sde-dspp-off = <0x55000 0x57000 0x59000 0x5b000>; + qcom,sde-dspp-size = <0x1800>; + + qcom,sde-dest-scaler-top-off = <0x00061000>; + qcom,sde-dest-scaler-top-size = <0x1c>; + qcom,sde-dest-scaler-off = <0x800 0x1000>; + qcom,sde-dest-scaler-size = <0x800>; + + qcom,sde-wb-off = <0x66000>; + qcom,sde-wb-size = <0x2c8>; + qcom,sde-wb-xin-id = <6>; + qcom,sde-wb-id = <2>; + qcom,sde-wb-clk-ctrl = <0x2bc 16>; + + qcom,sde-intf-off = <0x6b000 0x6b800 + 0x6c000 0x6c800>; + qcom,sde-intf-size = <0x2b8>; + qcom,sde-intf-type = "dp", "dsi", "dsi", "dp"; + + qcom,sde-pp-off = <0x71000 0x71800 + 0x72000 0x72800 0x73000 0x73800>; + qcom,sde-pp-slave = <0x0 0x0 0x0 0x0 0x0 0x0>; + qcom,sde-pp-size = <0xd4>; + qcom,sde-pp-merge-3d-id = <0x0 0x0 0x1 0x1 0x2 0x2>; + + qcom,sde-merge-3d-off = <0x84000 0x84100 0x84200>; + qcom,sde-merge-3d-size = <0x100>; + + qcom,sde-te2-off = <0x2000 0x2000 0x0 0x0 0x0 0x0>; + + qcom,sde-cdm-off = <0x7a200>; + qcom,sde-cdm-size = <0x224>; + + qcom,sde-dsc-off = <0x81000 0x81400 0x81800 0x81c00>; + qcom,sde-dsc-size = <0x140>; + + qcom,sde-dither-off = <0x30e0 0x30e0 0x30e0 + 0x30e0 0x30e0 0x30e0>; + qcom,sde-dither-version = <0x00010000>; + qcom,sde-dither-size = <0x20>; + + qcom,sde-sspp-type = "vig", "vig", "vig", "vig", + "dma", "dma", "dma", "dma"; + + qcom,sde-sspp-off = <0x5000 0x7000 0x9000 0xb000 + 0x25000 0x27000 0x29000 0x2b000>; + qcom,sde-sspp-src-size = <0x1f8>; + + qcom,sde-sspp-xin-id = <0 4 8 12 + 1 5 9 13>; + qcom,sde-sspp-excl-rect = <1 1 1 1 + 1 1 1 1>; + qcom,sde-sspp-smart-dma-priority = <5 6 7 8 1 2 3 4>; + qcom,sde-smart-dma-rev = "smart_dma_v2p5"; + + qcom,sde-mixer-pair-mask = <2 1 4 3 6 5>; + + qcom,sde-mixer-blend-op-off = <0x20 0x38 0x50 0x68 0x80 0x98 + 0xb0 0xc8 0xe0 0xf8 0x110>; + + qcom,sde-max-per-pipe-bw-kbps = <4400000 4400000 + 4400000 4400000 + 4400000 4400000 + 4400000 4400000>; + + qcom,sde-max-per-pipe-bw-high-kbps = <5300000 5300000 + 5300000 5300000 + 5300000 5300000 + 5300000 5300000>; + + /* offsets are relative to "mdp_phys + qcom,sde-off */ + qcom,sde-sspp-clk-ctrl = + <0x2ac 0>, <0x2b4 0>, <0x2bc 0>, <0x2c4 0>, + <0x2ac 8>, <0x2b4 8>, <0x2bc 8>, <0x2c4 8>; + qcom,sde-sspp-csc-off = <0x1a00>; + qcom,sde-csc-type = "csc-10bit"; + qcom,sde-qseed-type = "qseedv3lite"; + qcom,sde-sspp-qseed-off = <0xa00>; + qcom,sde-mixer-linewidth = <2560>; + qcom,sde-sspp-linewidth = <4096>; + qcom,sde-wb-linewidth = <4096>; + qcom,sde-mixer-blendstages = <0xb>; + qcom,sde-highest-bank-bit = <0x3>; + qcom,sde-ubwc-version = <0x400>; + qcom,sde-ubwc-swizzle = <0x6>; + qcom,sde-ubwc-bw-calc-version = <0x1>; + qcom,sde-ubwc-static = <0x1>; + qcom,sde-macrotile-mode = <0x1>; + qcom,sde-smart-panel-align-mode = <0xc>; + qcom,sde-panic-per-pipe; + qcom,sde-has-cdp; + qcom,sde-has-src-split; + qcom,sde-pipe-order-version = <0x1>; + qcom,sde-has-dim-layer; + qcom,sde-has-dest-scaler; + qcom,sde-has-idle-pc; + qcom,sde-max-dest-scaler-input-linewidth = <2048>; + qcom,sde-max-dest-scaler-output-linewidth = <2560>; + qcom,sde-max-bw-low-kbps = <13700000>; + qcom,sde-max-bw-high-kbps = <16600000>; + qcom,sde-min-core-ib-kbps = <2400000>; + qcom,sde-min-llcc-ib-kbps = <800000>; + qcom,sde-min-dram-ib-kbps = <800000>; + qcom,sde-dram-channels = <2>; + qcom,sde-num-nrt-paths = <0>; + qcom,sde-dspp-ltm-version = <0x00010000>; + /* offsets are based off dspp 0 and dspp 1 */ + qcom,sde-dspp-ltm-off = <0x2a000 0x28100>; + + qcom,sde-uidle-off = <0x80000>; + qcom,sde-uidle-size = <0x70>; + + qcom,sde-vbif-off = <0>; + qcom,sde-vbif-size = <0x1040>; + qcom,sde-vbif-id = <0>; + qcom,sde-vbif-memtype-0 = <3 3 3 3 3 3 3 3>; + qcom,sde-vbif-memtype-1 = <3 3 3 3 3 3>; + + qcom,sde-vbif-qos-rt-remap = <3 3 4 4 5 5 6 6>; + qcom,sde-vbif-qos-nrt-remap = <3 3 3 3 3 3 3 3>; + qcom,sde-vbif-qos-cwb-remap = <3 3 4 4 5 5 6 3>; + qcom,sde-vbif-qos-lutdma-remap = <3 3 3 3 4 4 4 4>; + + /* macrotile & macrotile-qseed has the same configs */ + qcom,sde-danger-lut = <0x000000ff 0x0000ffff + 0x00000000 0x00000000 0x0000ffff>; + + qcom,sde-safe-lut-linear = <0 0xfff0>; + qcom,sde-safe-lut-macrotile = <0 0xff00>; + /* same as safe-lut-macrotile */ + qcom,sde-safe-lut-macrotile-qseed = <0 0xff00>; + qcom,sde-safe-lut-nrt = <0 0xffff>; + qcom,sde-safe-lut-cwb = <0 0x3ff>; + + qcom,sde-qos-lut-linear = <0 0x00112222 0x22335777>; + qcom,sde-qos-lut-macrotile = <0 0x00112233 0x44556677>; + qcom,sde-qos-lut-macrotile-qseed = <0 0x00112233 0x66777777>; + qcom,sde-qos-lut-nrt = <0 0x00000000 0x00000000>; + qcom,sde-qos-lut-cwb = <0 0x66666541 0x00000000>; + + qcom,sde-cdp-setting = <1 1>, <1 0>; + + qcom,sde-qos-cpu-mask = <0x3>; + qcom,sde-qos-cpu-dma-latency = <300>; + + /* offsets are relative to "mdp_phys + qcom,sde-off */ + + qcom,sde-reg-dma-off = <0>; + qcom,sde-reg-dma-version = <0x00010002>; + qcom,sde-reg-dma-trigger-off = <0x119c>; + qcom,sde-reg-dma-xin-id = <7>; + qcom,sde-reg-dma-clk-ctrl = <0x2bc 20>; + + qcom,sde-secure-sid-mask = <0x4000821>; + + qcom,sde-sspp-vig-blocks { + qcom,sde-vig-csc-off = <0x1a00>; + qcom,sde-vig-qseed-off = <0xa00>; + qcom,sde-vig-qseed-size = <0xa0>; + qcom,sde-vig-gamut = <0x1d00 0x00060000>; + qcom,sde-vig-igc = <0x1d00 0x00060000>; + qcom,sde-vig-inverse-pma; + }; + + qcom,sde-sspp-dma-blocks { + dgm@0 { + qcom,sde-dma-igc = <0x400 0x00050000>; + qcom,sde-dma-gc = <0x600 0x00050000>; + qcom,sde-dma-inverse-pma; + qcom,sde-dma-csc-off = <0x200>; + }; + + dgm@1 { + qcom,sde-dma-igc = <0x1400 0x00050000>; + qcom,sde-dma-gc = <0x600 0x00050000>; + qcom,sde-dma-inverse-pma; + qcom,sde-dma-csc-off = <0x1200>; + }; + }; + + qcom,sde-dspp-blocks { + qcom,sde-dspp-igc = <0x0 0x00030001>; + qcom,sde-dspp-hsic = <0x800 0x00010007>; + qcom,sde-dspp-memcolor = <0x880 0x00010007>; + qcom,sde-dspp-hist = <0x800 0x00010007>; + qcom,sde-dspp-sixzone= <0x900 0x00010007>; + qcom,sde-dspp-vlut = <0xa00 0x00010008>; + qcom,sde-dspp-gamut = <0x1000 0x00040001>; + qcom,sde-dspp-pcc = <0x1700 0x00040000>; + qcom,sde-dspp-gc = <0x17c0 0x00010008>; + qcom,sde-dspp-dither = <0x82c 0x00010007>; + }; + + qcom,platform-supply-entries { + #address-cells = <1>; + #size-cells = <0>; + + qcom,platform-supply-entry@0 { + reg = <0>; + qcom,supply-name = "mmcx"; + qcom,supply-min-voltage = <0>; + qcom,supply-max-voltage = <0>; + qcom,supply-enable-load = <0>; + qcom,supply-disable-load = <0>; + }; + }; + + smmu_sde_unsec: qcom,smmu_sde_unsec_cb { + compatible = "qcom,smmu_sde_unsec"; + iommus = <&apps_smmu 0x820 0x402>; + qcom,iommu-dma-addr-pool = <0x00020000 0xfffe0000>; + qcom,iommu-faults = "non-fatal"; + qcom,iommu-earlymap; /* for cont-splash */ + }; + + smmu_sde_sec: qcom,smmu_sde_sec_cb { + compatible = "qcom,smmu_sde_sec"; + iommus = <&apps_smmu 0x821 0x400>; + qcom,iommu-dma-addr-pool = <0x00020000 0xfffe0000>; + qcom,iommu-faults = "non-fatal"; + qcom,iommu-vmid = <0xa>; + }; + + /* data and reg bus scale settings */ + qcom,sde-data-bus { + qcom,msm-bus,name = "mdss_sde"; + qcom,msm-bus,num-cases = <3>; + qcom,msm-bus,num-paths = <2>; + qcom,msm-bus,vectors-KBps = + <22 512 0 0>, <23 512 0 0>, + <22 512 0 6400000>, <23 512 0 6400000>, + <22 512 0 6400000>, <23 512 0 6400000>; + }; + + qcom,sde-reg-bus { + qcom,msm-bus,name = "mdss_reg"; + qcom,msm-bus,num-cases = <4>; + qcom,msm-bus,num-paths = <1>; + qcom,msm-bus,vectors-KBps = + <1 590 0 0>, + <1 590 0 76800>, + <1 590 0 150000>, + <1 590 0 300000>; + }; + }; + + sde_dp: qcom,dp_display@ae90000 { + cell-index = <0>; + compatible = "qcom,dp-display"; + + vdda-1p2-supply = <&pm8150_l9>; + vdda-0p9-supply = <&pm8150_l18>; + + reg = <0xae90000 0x0dc>, + <0xae90200 0x0c0>, + <0xae90400 0x508>, + <0xae91000 0x094>, + <0x88eaa00 0x200>, + <0x88ea200 0x200>, + <0x88ea600 0x200>, + <0xaf02000 0x1a0>, + <0x780000 0x621c>, + <0x88ea040 0x10>, + <0x88e8000 0x20>, + <0x0aee1000 0x034>, + <0xae91400 0x094>; + /* dp_ctrl: dp_ahb, dp_aux, dp_link, dp_p0 */ + reg-names = "dp_ahb", "dp_aux", "dp_link", + "dp_p0", "dp_phy", "dp_ln_tx0", "dp_ln_tx1", + "dp_mmss_cc", "qfprom_physical", "dp_pll", + "usb3_dp_com", "hdcp_physical", "dp_p1"; + + interrupt-parent = <&mdss_mdp>; + interrupts = <12 0>; + + clocks = <&clock_dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&clock_rpmh RPMH_CXO_CLK>, + <&clock_gcc GCC_USB3_PRIM_PHY_PIPE_CLK>, + <&clock_dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&clock_dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&clock_dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>, + <&mdss_dp_pll DP_VCO_DIVIDED_CLK_SRC_MUX>, + <&clock_dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>, + <&mdss_dp_pll DP_VCO_DIVIDED_CLK_SRC_MUX>, + <&clock_dispcc DISP_CC_MDSS_DP_PIXEL_CLK>, + <&clock_dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>; + clock-names = "core_aux_clk", "core_usb_ref_clk_src", + "core_usb_pipe_clk", "link_clk", "link_iface_clk", + "pixel_clk_rcg", "pixel_parent", + "pixel1_clk_rcg", "pixel1_parent", + "strm0_pixel_clk", "strm1_pixel_clk"; + + qcom,phy-version = <0x420>; + qcom,aux-cfg0-settings = [20 00]; + qcom,aux-cfg1-settings = [24 13]; + qcom,aux-cfg2-settings = [28 A4]; + qcom,aux-cfg3-settings = [2c 00]; + qcom,aux-cfg4-settings = [30 0a]; + qcom,aux-cfg5-settings = [34 26]; + qcom,aux-cfg6-settings = [38 0a]; + qcom,aux-cfg7-settings = [3c 03]; + qcom,aux-cfg8-settings = [40 b7]; + qcom,aux-cfg9-settings = [44 03]; + + qcom,max-pclk-frequency-khz = <675000>; + + qcom,mst-enable; + qcom,widebus-enable; + qcom,dsc-feature-enable; + qcom,fec-feature-enable; + qcom,max-dp-dsc-blks = <2>; + qcom,max-dp-dsc-input-width-pixs = <2048>; + + qcom,ctrl-supply-entries { + #address-cells = <1>; + #size-cells = <0>; + + qcom,ctrl-supply-entry@0 { + reg = <0>; + qcom,supply-name = "vdda-1p2"; + qcom,supply-min-voltage = <1200000>; + qcom,supply-max-voltage = <1200000>; + qcom,supply-enable-load = <33000>; + qcom,supply-disable-load = <0>; + }; + }; + + qcom,phy-supply-entries { + #address-cells = <1>; + #size-cells = <0>; + + qcom,phy-supply-entry@0 { + reg = <0>; + qcom,supply-name = "vdda-0p9"; + qcom,supply-min-voltage = <912000>; + qcom,supply-max-voltage = <912000>; + qcom,supply-enable-load = <126000>; + qcom,supply-disable-load = <0>; + }; + }; + + qcom,core-supply-entries { + #address-cells = <1>; + #size-cells = <0>; + + qcom,core-supply-entry@0 { + reg = <0>; + qcom,supply-name = "refgen"; + qcom,supply-min-voltage = <0>; + qcom,supply-max-voltage = <0>; + qcom,supply-enable-load = <0>; + qcom,supply-disable-load = <0>; + }; + }; + }; + + sde_rscc: qcom,sde_rscc@af20000 { + cell-index = <0>; + compatible = "qcom,sde-rsc"; + reg = <0xaf20000 0x3c50>, + <0xaf30000 0x3fd4>; + reg-names = "drv", "wrapper"; + qcom,sde-rsc-version = <3>; + + qcom,sde-dram-channels = <2>; + + vdd-supply = <&mdss_core_gdsc>; + clocks = <&clock_dispcc DISP_CC_MDSS_RSCC_VSYNC_CLK>, + <&clock_dispcc DISP_CC_MDSS_NON_GDSC_AHB_CLK>, + <&clock_dispcc DISP_CC_MDSS_RSCC_AHB_CLK>; + clock-names = "vsync_clk", "gdsc_clk", "iface_clk"; + + /* data and reg bus scale settings */ + qcom,sde-data-bus { + qcom,msm-bus,name = "disp_rsc_mnoc_llcc"; + qcom,msm-bus,active-only; + qcom,msm-bus,num-cases = <3>; + qcom,msm-bus,num-paths = <2>; + qcom,msm-bus,vectors-KBps = + <20003 20513 0 0>, <20004 20513 0 0>, + <20003 20513 0 6400000>, <20004 20513 0 6400000>, + <20003 20513 0 6400000>, <20004 20513 0 6400000>; + }; + + qcom,sde-ebi-bus { + qcom,msm-bus,name = "disp_rsc_ebi"; + qcom,msm-bus,active-only; + qcom,msm-bus,num-cases = <3>; + qcom,msm-bus,num-paths = <1>; + qcom,msm-bus,vectors-KBps = + <20000 20512 0 0>, + <20000 20512 0 6400000>, + <20000 20512 0 6400000>; + }; + }; + + mdss_rotator: qcom,mdss_rotator@aea8800 { + compatible = "qcom,sde_rotator"; + reg = <0x0ae00000 0xac000>, + <0x0aeb8000 0x3000>; + reg-names = "mdp_phys", + "rot_vbif_phys"; + status = "disabled"; + + #list-cells = <1>; + + qcom,mdss-rot-mode = <1>; + qcom,mdss-highest-bank-bit = <0x3>; + + /* Bus Scale Settings */ + qcom,msm-bus,name = "mdss_rotator"; + qcom,msm-bus,num-cases = <3>; + qcom,msm-bus,num-paths = <1>; + qcom,msm-bus,vectors-KBps = + <25 512 0 0>, + <25 512 0 6400000>, + <25 512 0 6400000>; + + rot-vdd-supply = <&mdss_core_gdsc>; + qcom,supply-names = "rot-vdd"; + + clocks = + <&clock_gcc GCC_DISP_AHB_CLK>, + <&clock_gcc GCC_DISP_SF_AXI_CLK>, + <&clock_dispcc DISP_CC_MDSS_AHB_CLK>, + <&clock_dispcc DISP_CC_MDSS_ROT_CLK>; + clock-names = "gcc_iface", "gcc_bus", + "iface_clk", "rot_clk"; + + interrupt-parent = <&mdss_mdp>; + interrupts = <2 0>; + + power-domains = <&mdss_mdp>; + + /* Offline rotator QoS setting */ + qcom,mdss-rot-vbif-qos-setting = <3 3 3 3 3 3 3 3>; + qcom,mdss-rot-vbif-memtype = <3 3>; + qcom,mdss-rot-cdp-setting = <1 1>; + qcom,mdss-rot-qos-lut = <0x0 0x0 0x0 0x0>; + qcom,mdss-rot-danger-lut = <0x0 0x0>; + qcom,mdss-rot-safe-lut = <0x0000ffff 0x0000ffff>; + + qcom,mdss-default-ot-rd-limit = <32>; + qcom,mdss-default-ot-wr-limit = <32>; + + qcom,mdss-sbuf-headroom = <20>; + + /* reg bus scale settings */ + rot_reg: qcom,rot-reg-bus { + qcom,msm-bus,name = "mdss_rot_reg"; + qcom,msm-bus,num-cases = <2>; + qcom,msm-bus,num-paths = <1>; + qcom,msm-bus,vectors-KBps = + <1 590 0 0>, + <1 590 0 76800>; + }; + + smmu_rot_unsec: qcom,smmu_rot_unsec_cb { + compatible = "qcom,smmu_sde_rot_unsec"; + iommus = <&apps_smmu 0x215C 0x0400>; + qcom,iommu-dma = "disabled"; + }; + }; + + mdss_dsi0: qcom,mdss_dsi_ctrl0@ae94000 { + compatible = "qcom,dsi-ctrl-hw-v2.4"; + label = "dsi-ctrl-0"; + cell-index = <0>; + reg = <0xae94000 0x400>, + <0xaf08000 0x4>; + reg-names = "dsi_ctrl", "disp_cc_base"; + interrupt-parent = <&mdss_mdp>; + interrupts = <4 0>; + vdda-1p2-supply = <&pm8150_l9>; + refgen-supply = <&refgen>; + clocks = <&clock_dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&clock_dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&clock_dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&clock_dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&clock_dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>, + <&clock_dispcc DISP_CC_MDSS_ESC0_CLK>; + clock-names = "byte_clk", "byte_clk_rcg", "byte_intf_clk", + "pixel_clk", "pixel_clk_rcg", "esc_clk"; + + qcom,ctrl-supply-entries { + #address-cells = <1>; + #size-cells = <0>; + + qcom,ctrl-supply-entry@0 { + reg = <0>; + qcom,supply-name = "vdda-1p2"; + qcom,supply-min-voltage = <1200000>; + qcom,supply-max-voltage = <1200000>; + qcom,supply-enable-load = <26700>; + qcom,supply-disable-load = <0>; + }; + }; + + qcom,core-supply-entries { + #address-cells = <1>; + #size-cells = <0>; + + qcom,core-supply-entry@0 { + reg = <0>; + qcom,supply-name = "refgen"; + qcom,supply-min-voltage = <0>; + qcom,supply-max-voltage = <0>; + qcom,supply-enable-load = <0>; + qcom,supply-disable-load = <0>; + }; + }; + }; + + mdss_dsi1: qcom,mdss_dsi_ctrl1@ae96000 { + compatible = "qcom,dsi-ctrl-hw-v2.4"; + label = "dsi-ctrl-1"; + cell-index = <1>; + reg = <0xae96000 0x400>, + <0xaf08000 0x4>; + reg-names = "dsi_ctrl", "disp_cc_base"; + interrupt-parent = <&mdss_mdp>; + interrupts = <5 0>; + vdda-1p2-supply = <&pm8150_l9>; + refgen-supply = <&refgen>; + clocks = <&clock_dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&clock_dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&clock_dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&clock_dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&clock_dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>, + <&clock_dispcc DISP_CC_MDSS_ESC1_CLK>; + clock-names = "byte_clk", "byte_clk_rcg", "byte_intf_clk", + "pixel_clk", "pixel_clk_rcg", "esc_clk"; + qcom,ctrl-supply-entries { + #address-cells = <1>; + #size-cells = <0>; + + qcom,ctrl-supply-entry@0 { + reg = <0>; + qcom,supply-name = "vdda-1p2"; + qcom,supply-min-voltage = <1200000>; + qcom,supply-max-voltage = <1200000>; + qcom,supply-enable-load = <26700>; + qcom,supply-disable-load = <0>; + }; + }; + + qcom,core-supply-entries { + #address-cells = <1>; + #size-cells = <0>; + + qcom,core-supply-entry@0 { + reg = <0>; + qcom,supply-name = "refgen"; + qcom,supply-min-voltage = <0>; + qcom,supply-max-voltage = <0>; + qcom,supply-enable-load = <0>; + qcom,supply-disable-load = <0>; + }; + }; + }; + + mdss_dsi_phy0: qcom,mdss_dsi_phy0@ae94400 { + compatible = "qcom,dsi-phy-v4.1"; + label = "dsi-phy-0"; + cell-index = <0>; + reg = <0xae94400 0x760>; + reg-names = "dsi_phy"; + vdda-0p9-supply = <&pm8150_l5>; + qcom,platform-strength-ctrl = [55 03 + 55 03 + 55 03 + 55 03 + 55 00]; + qcom,platform-lane-config = [00 00 0a 0a + 00 00 0a 0a + 00 00 0a 0a + 00 00 0a 0a + 00 00 8a 8a]; + qcom,platform-regulator-settings = [1d 1d 1d 1d 1d]; + qcom,phy-supply-entries { + #address-cells = <1>; + #size-cells = <0>; + qcom,phy-supply-entry@0 { + reg = <0>; + qcom,supply-name = "vdda-0p9"; + qcom,supply-min-voltage = <880000>; + qcom,supply-max-voltage = <880000>; + qcom,supply-enable-load = <46000>; + qcom,supply-disable-load = <0>; + }; + }; + }; + + mdss_dsi_phy1: qcom,mdss_dsi_phy1@ae96400 { + compatible = "qcom,dsi-phy-v4.1"; + label = "dsi-phy-1"; + cell-index = <1>; + reg = <0xae96400 0x760>; + reg-names = "dsi_phy"; + vdda-0p9-supply = <&pm8150_l5>; + qcom,platform-strength-ctrl = [55 03 + 55 03 + 55 03 + 55 03 + 55 00]; + qcom,platform-regulator-settings = [1d 1d 1d 1d 1d]; + qcom,platform-lane-config = [00 00 0a 0a + 00 00 0a 0a + 00 00 0a 0a + 00 00 0a 0a + 00 00 8a 8a]; + qcom,phy-supply-entries { + #address-cells = <1>; + #size-cells = <0>; + qcom,phy-supply-entry@0 { + reg = <0>; + qcom,supply-name = "vdda-0p9"; + qcom,supply-min-voltage = <880000>; + qcom,supply-max-voltage = <880000>; + qcom,supply-enable-load = <46000>; + qcom,supply-disable-load = <0>; + }; + }; + }; + +}; diff --git a/drivers/input/touchscreen/fts_touch/.gitupstream b/drivers/input/touchscreen/fts_touch/.gitupstream new file mode 100644 index 000000000000..59ae4d62906e --- /dev/null +++ b/drivers/input/touchscreen/fts_touch/.gitupstream @@ -0,0 +1 @@ +https://android.googlesource.com/kernel/msm-modules/fts_touch diff --git a/drivers/input/touchscreen/sec_touch/.gitupstream b/drivers/input/touchscreen/sec_touch/.gitupstream new file mode 100644 index 000000000000..abac307003db --- /dev/null +++ b/drivers/input/touchscreen/sec_touch/.gitupstream @@ -0,0 +1 @@ +https://android.googlesource.com/kernel/msm-modules/sec_touch diff --git a/drivers/staging/data-kernel/.gitupstream b/drivers/staging/data-kernel/.gitupstream new file mode 100644 index 000000000000..91331c5c87ee --- /dev/null +++ b/drivers/staging/data-kernel/.gitupstream @@ -0,0 +1 @@ +https://android.googlesource.com/kernel/msm-modules/data-kernel diff --git a/drivers/staging/fw-api/.gitupstream b/drivers/staging/fw-api/.gitupstream new file mode 100644 index 000000000000..d18cf78be4db --- /dev/null +++ b/drivers/staging/fw-api/.gitupstream @@ -0,0 +1 @@ +https://android.googlesource.com/kernel/msm-modules/wlan-fw-api diff --git a/drivers/staging/qca-wifi-host-cmn/.gitupstream b/drivers/staging/qca-wifi-host-cmn/.gitupstream new file mode 100644 index 000000000000..b8395abbd532 --- /dev/null +++ b/drivers/staging/qca-wifi-host-cmn/.gitupstream @@ -0,0 +1 @@ +https://android.googlesource.com/kernel/msm-modules/qca-wfi-host-cmn diff --git a/drivers/staging/qcacld-3.0/.gitupstream b/drivers/staging/qcacld-3.0/.gitupstream new file mode 100644 index 000000000000..8862a8f18f19 --- /dev/null +++ b/drivers/staging/qcacld-3.0/.gitupstream @@ -0,0 +1 @@ +https://android.googlesource.com/kernel/msm-modules/qcacld diff --git a/techpack/audio/.gitupstream b/techpack/audio/.gitupstream new file mode 100644 index 000000000000..dcfbb1c2588b --- /dev/null +++ b/techpack/audio/.gitupstream @@ -0,0 +1 @@ +https://android.googlesource.com/kernel/msm-extra diff --git a/techpack/camera/.gitupstream b/techpack/camera/.gitupstream new file mode 100644 index 000000000000..6c0674cc4f29 --- /dev/null +++ b/techpack/camera/.gitupstream @@ -0,0 +1 @@ +https://android.googlesource.com/kernel/msm-extra/camera-kernel diff --git a/techpack/dataipa/.gitupstream b/techpack/dataipa/.gitupstream new file mode 100644 index 000000000000..fc3ebe86b049 --- /dev/null +++ b/techpack/dataipa/.gitupstream @@ -0,0 +1 @@ +https://android.googlesource.com/kernel/msm-extra/dataipa diff --git a/techpack/display/.gitupstream b/techpack/display/.gitupstream new file mode 100644 index 000000000000..b4d421715cf4 --- /dev/null +++ b/techpack/display/.gitupstream @@ -0,0 +1 @@ +https://android.googlesource.com/kernel/msm-extra/display-drivers diff --git a/techpack/video/.gitupstream b/techpack/video/.gitupstream new file mode 100644 index 000000000000..795f1bce40cb --- /dev/null +++ b/techpack/video/.gitupstream @@ -0,0 +1 @@ +https://android.googlesource.com/kernel/msm-extra/video-driver |