msm8998: wifi: revert config to O state

till we upgraded kernel to P

Change-Id: Ie6876584b54e0e1c034a5940191a298dfc98e2d7

1 files changed, 18 insertions, 89 deletions

diff --git a/wifi/WCNSS_qcom_cfg.ini b/wifi/WCNSS_qcom_cfg.ini
index 4fb9915..95ca22c 100644
--- a/wifi/WCNSS_qcom_cfg.ini
+++ b/wifi/WCNSS_qcom_cfg.ini
@@ -1,52 +1,6 @@
 # This file allows user to override the factory
 # defaults for the WLAN Driver
 
-# ifdef VENDOR_EDIT
-gEnableDFSMasterCap=0
-gDualMacFeatureDisable=1
-gInitialScanNoDFSChnl=1
-#gInitialDwellTime=20
-RoamRssiDiff=5
-g11dSupportEnabled=1
-gSoftApMaxPeers=8
-gRoamBmissFirstBcnt=15
-gRoamBmissFinalBcnt=25
-gDroppedPktDisconnectTh=1024
-gEnablePowerSaveOffload=1
-# Runtime is default zero in hostdriver
-gRuntimePM=0
-gRAFilterEnable=0
-gMCAddrListEnable=1
-# 0: disable feature (default)
-# 1: drop all broadcast frames, except ARP
-# 2: drop all multicast frames, except ICMPv6
-# 3: drop all broadcast and multicast frames, except ARP and ICMPv6
-gHwFilterMode=3
-gBpfFilterEnable=1
-#gFwDebugLogLevel=3
-#gFwDebugModuleLoglevel=2,1,3,1,5,1,9,1,13,1,14,1,18,1,19,1,26,1,28,1,29,1,31,1,36,1,38,1,46,1,47,1,50,1,52,1,53,1,56,1,60,1,61,1
-#gChannelBondingMode24GHz=1
-gActiveMaxChannelTime=60
-gActiveMinChannelTime=40
-gForce1x1Exception=1
-# Sync http://pgerrit.oneplus.cn:8080/#/c/200897/ for EID-4159 and http://pgerrit.oneplus.cn:8080/#/c/229408/ for ISTRACKING-19649
-gActionOUIConnect1x1=000C43 00 25 42 001018 06 02FFF02C0000 BC 25 42 001018 06 02FF040C0000 BC 25 42 001018 06 02FF001C0000 BC 25 48 001018 06 0200000C0000 BC 25 42
-gStaKeepAlivePeriod=30
-gper_roam_enabled=0
-#gper_roam_enabled=3
-#gper_roam_high_rate_th=540
-#gper_roam_low_rate_th =150
-#gper_roam_th_percent=80
-#gper_roam_rest_time=60
-gItoRepeatCount=5
-g_enable_packet_filter_bitmap=3
-gEnableSifsBurst=3
-LROEnable=0
-gEnableModulatedDTIM=3
-gMaxLIModulatedDTIM=6
-#gActiveModeOffload=0
-# endif /* VENDOR_EDIT */
-
 # Enable IMPS or not
 gEnableImps=1
 
@@ -109,18 +63,13 @@ gDisableIntraBssFwd=0
 WmmIsEnabled=0
 
 # 802.11d support
-
-#ifdef VENDOR_EDIT
-#g11dSupportEnabled=0
-#endif VENDOR_EDIT
+g11dSupportEnabled=1
 
 # 802.11h support
 g11hSupportEnabled=1
 
 # DFS Master Capability
-#ifdef VENDOR_EDIT
-#gEnableDFSMasterCap=1
-#ifdef VENDOR_EDIT
+gEnableDFSMasterCap=1
 
 # ESE Support and fast transition
 EseEnabled=0
@@ -142,9 +91,7 @@ FastRoamEnabled=1
 # terms of RSSI.  Checking is disabled if set to Zero.Otherwise it will
 # use this value as to how better the RSSI of the new/roamable AP should
 # be for roaming
-#ifdef VENDOR_EDIT
-#RoamRssiDiff=3
-#endif VENDOR_EDIT
+RoamRssiDiff=5
 
 # To enable, set gRoamIntraBand=1 (Roaming within band)
 # To disable, set gRoamIntraBand=0 (Roaming across band)
@@ -221,10 +168,8 @@ gSetRxChainmask1x1=1
 # Scan Timing Parameters
 # gPassiveMaxChannelTime=110
 # gPassiveMinChannelTime=60
-#ifdef VENDOR_EDIT
-#gActiveMaxChannelTime=40
-#gActiveMinChannelTime=20
-#endif VENDOR_EDIT
+gActiveMaxChannelTime=40
+gActiveMinChannelTime=20
 
 #If set to 0, MCC is not allowed.
 gEnableMCCMode=1
@@ -264,9 +209,7 @@ gEnableTxSUBeamformer=1
 gEnableFastRoamInConcurrency=1
 
 #Enable/Disable PER based roaming
-#ifdef VENDOR_EDIT
-#gper_roam_enabled=0
-#endif VENDOR_EDIT
+gper_roam_enabled=0
 
 #Maxium Channel time in msec
 gMaxMediumTime = 6000
@@ -275,9 +218,7 @@ gMaxMediumTime = 6000
 gRrmEnable=1
 
 #Enable Power Save offload
-#ifdef VENDOR_EDIT
-#gEnablePowerSaveOffload=2
-#endif VENDOR_EDIT
+gEnablePowerSaveOffload=2
 
 #Enable firmware uart print
 gEnablefwprint=0
@@ -365,12 +306,7 @@ gEnableLpassSupport=1
 gCountryCodePriority=1
 
 # Enable(1)/Disable(0) SIFS burst
-#ifdef VENDOR_EDIT
-#Min: 0  disabled
-#Max: 3  enabled802.11g
-#Default: 1 enabled, but disabled for legacy mode
-# gEnableSifsBurst=1
-# endif /* VENDOR_EDIT */
+gEnableSifsBurst=1
 
 # Enable or Disable Multi-user MIMO
 # 1=Enable (default), 0=Disable
@@ -479,9 +415,7 @@ TSOEnable=1
 
 # Enable Large Recieve Offload
 # 1 - enable(default)  0 - disable
-#ifdef VENDOR_EDIT
-#LROEnable=1
-# endif /* VENDOR_EDIT */
+LROEnable=1
 
 # Enable HT MPDU Density
 # 4 for 2 micro sec
@@ -502,11 +436,7 @@ gEnableFlowSteering=1
 gEnableNanSupport=1
 ################ NAN feature set end #####################
 
-#ifdef VENDOR_EDIT
-adaptive_dwell_mode_enabled=0
-#else
-#adaptive_dwell_mode_enabled=1
-#endif /* VENDOR_EDIT */
+adaptive_dwell_mode_enabled=1
 
 hostscan_adaptive_dwell_mode=1
 
@@ -519,17 +449,16 @@ adapt_dwell_wifi_act_threshold=10
 # 0- Disable DTIM Synth
 gEnableLPRx=0
 
-gEnableTDLSScan=1
+# VENDOR EDIT
+
+# 0: disable feature (default)
+# 1: drop all broadcast frames, except ARP
+# 2: drop all multicast frames, except ICMPv6
+# 3: drop all broadcast and multicast frames, except ARP and ICMPv6
+gHwFilterMode=3
 
-#ifdef VENDOR_EDIT
-# for ISTRACKING-22844, disable adaptive dwell scan
-global_adapt_dwelltime_mode=1
-roamscan_adaptive_dwell_mode=1
-extscan_adaptive_dwell_mode=1
-pnoscan_adaptive_dwell_mode=1
-#endif /* VENDOR_EDIT */
+# END VENDOR EDIT
 
 END
 
 # Note: Configuration parser would not read anything past the END marker
-