msm8998: update blobs from 9.0 beta

Change-Id: I0d2e34bae5728dd3af36a95054546560b970606e

3 files changed, 574 insertions, 18 deletions

diff --git a/wifi/WCNSS_qcom_cfg.ini b/wifi/WCNSS_qcom_cfg.ini
index 95ca22c..4fb9915 100644
--- a/wifi/WCNSS_qcom_cfg.ini
+++ b/wifi/WCNSS_qcom_cfg.ini
@@ -1,6 +1,52 @@
 # This file allows user to override the factory
 # defaults for the WLAN Driver
 
+# ifdef VENDOR_EDIT
+gEnableDFSMasterCap=0
+gDualMacFeatureDisable=1
+gInitialScanNoDFSChnl=1
+#gInitialDwellTime=20
+RoamRssiDiff=5
+g11dSupportEnabled=1
+gSoftApMaxPeers=8
+gRoamBmissFirstBcnt=15
+gRoamBmissFinalBcnt=25
+gDroppedPktDisconnectTh=1024
+gEnablePowerSaveOffload=1
+# Runtime is default zero in hostdriver
+gRuntimePM=0
+gRAFilterEnable=0
+gMCAddrListEnable=1
+# 0: disable feature (default)
+# 1: drop all broadcast frames, except ARP
+# 2: drop all multicast frames, except ICMPv6
+# 3: drop all broadcast and multicast frames, except ARP and ICMPv6
+gHwFilterMode=3
+gBpfFilterEnable=1
+#gFwDebugLogLevel=3
+#gFwDebugModuleLoglevel=2,1,3,1,5,1,9,1,13,1,14,1,18,1,19,1,26,1,28,1,29,1,31,1,36,1,38,1,46,1,47,1,50,1,52,1,53,1,56,1,60,1,61,1
+#gChannelBondingMode24GHz=1
+gActiveMaxChannelTime=60
+gActiveMinChannelTime=40
+gForce1x1Exception=1
+# Sync http://pgerrit.oneplus.cn:8080/#/c/200897/ for EID-4159 and http://pgerrit.oneplus.cn:8080/#/c/229408/ for ISTRACKING-19649
+gActionOUIConnect1x1=000C43 00 25 42 001018 06 02FFF02C0000 BC 25 42 001018 06 02FF040C0000 BC 25 42 001018 06 02FF001C0000 BC 25 48 001018 06 0200000C0000 BC 25 42
+gStaKeepAlivePeriod=30
+gper_roam_enabled=0
+#gper_roam_enabled=3
+#gper_roam_high_rate_th=540
+#gper_roam_low_rate_th =150
+#gper_roam_th_percent=80
+#gper_roam_rest_time=60
+gItoRepeatCount=5
+g_enable_packet_filter_bitmap=3
+gEnableSifsBurst=3
+LROEnable=0
+gEnableModulatedDTIM=3
+gMaxLIModulatedDTIM=6
+#gActiveModeOffload=0
+# endif /* VENDOR_EDIT */
+
 # Enable IMPS or not
 gEnableImps=1
 
@@ -63,13 +109,18 @@ gDisableIntraBssFwd=0
 WmmIsEnabled=0
 
 # 802.11d support
-g11dSupportEnabled=1
+
+#ifdef VENDOR_EDIT
+#g11dSupportEnabled=0
+#endif VENDOR_EDIT
 
 # 802.11h support
 g11hSupportEnabled=1
 
 # DFS Master Capability
-gEnableDFSMasterCap=1
+#ifdef VENDOR_EDIT
+#gEnableDFSMasterCap=1
+#ifdef VENDOR_EDIT
 
 # ESE Support and fast transition
 EseEnabled=0
@@ -91,7 +142,9 @@ FastRoamEnabled=1
 # terms of RSSI.  Checking is disabled if set to Zero.Otherwise it will
 # use this value as to how better the RSSI of the new/roamable AP should
 # be for roaming
-RoamRssiDiff=5
+#ifdef VENDOR_EDIT
+#RoamRssiDiff=3
+#endif VENDOR_EDIT
 
 # To enable, set gRoamIntraBand=1 (Roaming within band)
 # To disable, set gRoamIntraBand=0 (Roaming across band)
@@ -168,8 +221,10 @@ gSetRxChainmask1x1=1
 # Scan Timing Parameters
 # gPassiveMaxChannelTime=110
 # gPassiveMinChannelTime=60
-gActiveMaxChannelTime=40
-gActiveMinChannelTime=20
+#ifdef VENDOR_EDIT
+#gActiveMaxChannelTime=40
+#gActiveMinChannelTime=20
+#endif VENDOR_EDIT
 
 #If set to 0, MCC is not allowed.
 gEnableMCCMode=1
@@ -209,7 +264,9 @@ gEnableTxSUBeamformer=1
 gEnableFastRoamInConcurrency=1
 
 #Enable/Disable PER based roaming
-gper_roam_enabled=0
+#ifdef VENDOR_EDIT
+#gper_roam_enabled=0
+#endif VENDOR_EDIT
 
 #Maxium Channel time in msec
 gMaxMediumTime = 6000
@@ -218,7 +275,9 @@ gMaxMediumTime = 6000
 gRrmEnable=1
 
 #Enable Power Save offload
-gEnablePowerSaveOffload=2
+#ifdef VENDOR_EDIT
+#gEnablePowerSaveOffload=2
+#endif VENDOR_EDIT
 
 #Enable firmware uart print
 gEnablefwprint=0
@@ -306,7 +365,12 @@ gEnableLpassSupport=1
 gCountryCodePriority=1
 
 # Enable(1)/Disable(0) SIFS burst
-gEnableSifsBurst=1
+#ifdef VENDOR_EDIT
+#Min: 0  disabled
+#Max: 3  enabled802.11g
+#Default: 1 enabled, but disabled for legacy mode
+# gEnableSifsBurst=1
+# endif /* VENDOR_EDIT */
 
 # Enable or Disable Multi-user MIMO
 # 1=Enable (default), 0=Disable
@@ -415,7 +479,9 @@ TSOEnable=1
 
 # Enable Large Recieve Offload
 # 1 - enable(default)  0 - disable
-LROEnable=1
+#ifdef VENDOR_EDIT
+#LROEnable=1
+# endif /* VENDOR_EDIT */
 
 # Enable HT MPDU Density
 # 4 for 2 micro sec
@@ -436,7 +502,11 @@ gEnableFlowSteering=1
 gEnableNanSupport=1
 ################ NAN feature set end #####################
 
-adaptive_dwell_mode_enabled=1
+#ifdef VENDOR_EDIT
+adaptive_dwell_mode_enabled=0
+#else
+#adaptive_dwell_mode_enabled=1
+#endif /* VENDOR_EDIT */
 
 hostscan_adaptive_dwell_mode=1
 
@@ -449,16 +519,17 @@ adapt_dwell_wifi_act_threshold=10
 # 0- Disable DTIM Synth
 gEnableLPRx=0
 
-# VENDOR EDIT
-
-# 0: disable feature (default)
-# 1: drop all broadcast frames, except ARP
-# 2: drop all multicast frames, except ICMPv6
-# 3: drop all broadcast and multicast frames, except ARP and ICMPv6
-gHwFilterMode=3
+gEnableTDLSScan=1
 
-# END VENDOR EDIT
+#ifdef VENDOR_EDIT
+# for ISTRACKING-22844, disable adaptive dwell scan
+global_adapt_dwelltime_mode=1
+roamscan_adaptive_dwell_mode=1
+extscan_adaptive_dwell_mode=1
+pnoscan_adaptive_dwell_mode=1
+#endif /* VENDOR_EDIT */
 
 END
 
 # Note: Configuration parser would not read anything past the END marker
+
diff --git a/wifi/WCNSS_qcom_cfg_cta.ini b/wifi/WCNSS_qcom_cfg_cta.ini
new file mode 100644
index 0000000..839d215
--- /dev/null
+++ b/wifi/WCNSS_qcom_cfg_cta.ini
@@ -0,0 +1,483 @@
+# This file allows user to override the factory
+# defaults for the WLAN Driver
+
+# CTA test config
+# ifdef VENDOR_EDIT
+gEnableImps=0
+gEnableBmps=0
+#EseEnabled=0
+FastTransitionEnabled=0
+# FastRoamEnabled=0 will lead to wifi crash since pre-CS3 release,
+# use following params instead.  use keep FastRoamEnabled=1 and use
+# gRoamScanOffloadEnabled=0 to disable fw triggered scan.
+# no matter what version.
+#gEnableFWRssiMonitoring=0
+FastRoamEnabled=1
+gRoamScanOffloadEnabled=0
+gEnableDFSChnlScan=0
+gPNOScanSupport=0
+gEnablePowerSaveOffload=1
+gRuntimePM=0
+# endif /* VENDOR_EDIT */
+
+# Enable IMPS or not
+# ifdef VENDOR_EDIT
+#gEnableImps=1
+# endif /* VENDOR_EDIT */
+
+# Enable BMPS or not
+# ifdef VENDOR_EDIT
+#gEnableBmps=1
+# endif /* VENDOR_EDIT */
+
+# Phy Mode (auto, b, g, n, etc)
+# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
+# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only
+# 7 = 11b only 8 = 11ac only.
+gDot11Mode=0
+
+# Assigned MAC Addresses - This will be used until NV items are in place
+# Each byte of MAC address is represented in Hex format as XX
+Intf0MacAddress=000AF58989FF
+Intf1MacAddress=000AF58989FE
+Intf2MacAddress=000AF58989FD
+Intf3MacAddress=000AF58989FC
+
+# UAPSD service interval for VO,VI, BE, BK traffic
+InfraUapsdVoSrvIntv=0
+InfraUapsdViSrvIntv=0
+InfraUapsdBeSrvIntv=0
+InfraUapsdBkSrvIntv=0
+
+# Flag to allow STA send AddTspec even when ACM is Off
+gAddTSWhenACMIsOff=1
+
+# Flags to filter Mcast and Bcast RX packets.
+# Value 0: No filtering, 1: Filter all Multicast.
+# 2: Filter all Broadcast. 3: Filter all Mcast abd Bcast
+McastBcastFilter=3
+
+#Flag to enable HostARPOffload feature or not
+hostArpOffload=1
+
+#Flag to enable HostNSOffload feature or not
+hostNSOffload=1
+
+# 802.11n Protection flag
+gEnableApProt=1
+
+#Enable OBSS protection
+gEnableApOBSSProt=1
+
+#Enable/Disable UAPSD for SoftAP
+gEnableApUapsd=1
+
+# Fixed Rate
+gFixedRate=0
+
+# Maximum Tx power
+# gTxPowerCap=30
+
+# Fragmentation Threshold
+# gFragmentationThreshold=2346
+
+# RTS threshold
+RTSThreshold=1048576
+
+# Intra-BSS forward
+gDisableIntraBssFwd=0
+
+# WMM Enable/Disable
+WmmIsEnabled=0
+
+# 802.11d support
+g11dSupportEnabled=0
+
+# 802.11h support
+g11hSupportEnabled=1
+
+# DFS Master Capability
+gEnableDFSMasterCap=1
+
+# ESE Support and fast transition
+EseEnabled=0
+
+ImplicitQosIsEnabled=0
+
+gNeighborScanTimerPeriod=200
+gNeighborLookupThreshold=76
+gNeighborScanChannelMinTime=20
+gNeighborScanChannelMaxTime=30
+gMaxNeighborReqTries=3
+
+# Legacy (non-ESE, non-802.11r) Fast Roaming Support
+# To enable, set FastRoamEnabled=1
+# To disable, set FastRoamEnabled=0
+# ifdef VENDOR_EDIT
+#FastRoamEnabled=1
+# endif /* VENDOR_EDIT */
+
+# Check if the AP to which we are roaming is better than current AP in
+# terms of RSSI.  Checking is disabled if set to Zero.Otherwise it will
+# use this value as to how better the RSSI of the new/roamable AP should
+# be for roaming
+RoamRssiDiff=3
+
+# To enable, set gRoamIntraBand=1 (Roaming within band)
+# To disable, set gRoamIntraBand=0 (Roaming across band)
+gRoamIntraBand=0
+
+#Short Guard Interval Enable/disable
+gShortGI20Mhz=1
+gShortGI40Mhz=1
+
+#Auto Shutdown  Value in seconds. A value of 0 means Auto shutoff is disabled
+gAPAutoShutOff=0
+
+#Auto Shutdown wlan : Value in Seconds. 0 means disabled. Max 1 day = 86400 sec
+gWlanAutoShutdown = 0
+
+# Not used.
+gApAutoChannelSelection=0
+
+#Preferred band (both or 2.4 only or 5 only)
+BandCapability=0
+
+#Channel Bonding
+gChannelBondingMode5GHz=1
+
+#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
+#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link
+#is idle for last 10 seconds.) For both active and power save clients.
+
+#Power save clients: DUT set TIM bit from 10th second onwards and till client
+#honors TIM bit. If doesn't honor for 5 seconds then DUT remove client.
+
+#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not
+#success still we try on 11th second if not tries on 12th and so on till 15th
+#second. Hence before disconnection DUT will send 5 NULL frames. Hence in any
+#case DUT will detect client got removed in (10+5) seconds.
+#i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod)..
+
+#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and
+#it is period where we send NULL frame.
+#gApLinkMonitorPeriod = 10
+#gGoLinkMonitorPeriod = 10
+
+#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame
+#are succeed to send or not. Hence total effective detection time is
+# (gGoLinkMonitorPeriod + gGoKeepAlivePeriod) /
+# (gApLinkMonitorPeriod + gApKeepAlivePeriod)
+gGoKeepAlivePeriod = 20
+gApKeepAlivePeriod = 20
+
+#If set will start with active scan after driver load, otherwise will start with
+#passive scan to find out the domain
+gEnableBypass11d=1
+
+#If set to 0, will not scan DFS channels
+#ifdef VENDOR_EDIT
+#gEnableDFSChnlScan=1
+#endif /* VENDOR_EDIT */
+
+# Enable DFS channel roam
+# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE
+gAllowDFSChannelRoam=1
+
+gVhtChannelWidth=2
+
+#Data Inactivity Timeout when in powersave (in ms)
+gDataInactivityTimeout=200
+
+# Set txchainmask and rxchainmask
+# These parameters are used only if gEnable2x2 is 0
+# Valid values are 1,2
+# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0.
+# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1.
+gSetTxChainmask1x1=1
+gSetRxChainmask1x1=1
+
+# Scan Timing Parameters
+# gPassiveMaxChannelTime=110
+# gPassiveMinChannelTime=60
+gActiveMaxChannelTime=40
+gActiveMinChannelTime=20
+
+#If set to 0, MCC is not allowed.
+gEnableMCCMode=1
+
+# MCC to SCC Switch mode:
+# 0-Disable
+# 1-Enable
+# 2-Force SCC if same band, with SAP restart
+# 3-Force SCC if same band, without SAP restart by sending (E)CSA
+# 4-Force SCC if same band (or) use SAP mandatory channel for DBS,
+#   without SAP restart by sending (E)CSA
+gWlanMccToSccSwitchMode = 0
+
+# 1=enable STBC; 0=disable STBC
+gEnableRXSTBC=1
+
+# 1=enable tx STBC; 0=disable
+gEnableTXSTBC=1
+
+# 1=enable rx LDPC; 0=disable
+gEnableRXLDPC=1
+
+#Enable/Disable Tx beamforming
+gTxBFEnable=1
+
+#Enable/Disable Tx beamformee in SAP mode
+gEnableTxBFeeSAP=1
+
+# Enable Tx beamforming in VHT20MHz
+# Valid values are 0,1. If commented out, the default value is 0.
+# 0=disable, 1=enable
+gEnableTxBFin20MHz=1
+
+#Enable/Disable SU Tx beamformer support.
+gEnableTxSUBeamformer=1
+
+gEnableFastRoamInConcurrency=1
+
+#Maxium Channel time in msec
+gMaxMediumTime = 6000
+
+# 802.11K support
+gRrmEnable=1
+
+#Enable Power Save offload
+#ifdef VENDOR_EDIT
+#gEnablePowerSaveOffload=2
+#endif /* VENDOR_EDIT */
+
+#Enable firmware uart print
+gEnablefwprint=0
+
+# Firmware log mode
+# Valid values are 0,1,2
+# 0=Disable, 1=WMI, 2=DIAG
+gEnablefwlog=1
+
+# Maximum Receive AMPDU size (VHT only. Valid values:
+# 0->8k 1->16k 2->32k 3->64k 4->128k)
+gVhtAmpduLenExponent=7
+
+# Maximum MPDU length (VHT only. Valid values:
+# 0->3895 octets, 1->7991 octets, 2->11454 octets)
+gVhtMpduLen=2
+
+# Maximum number of wow filters required
+#gMaxWoWFilters=22
+
+# WOW Enable/Disable.
+# 0 - Disable both magic pattern match and pattern byte match.
+# 1 - Enable magic pattern match on all interfaces.
+# 2 - Enable pattern byte match on all interfaces.
+# 3 - Enable both magic pattern and pattern byte match on all interfaces.
+# Default value of gEnableWoW is 3.
+# gEnableWoW=0
+
+# Enable or Disable MCC Adaptive Scheduler at the FW
+# 1=Enable (default), 0=Disable
+gEnableMCCAdaptiveScheduler=1
+
+#Enable or Disable p2p device address administered
+isP2pDeviceAddrAdministrated=0
+
+# Set Thermal Power limit
+TxPower2g=10
+TxPower5g=10
+
+# Remove Overlap channel restriction
+gEnableOverLapCh=0
+
+#Enable VHT on 2.4Ghz
+gEnableVhtFor24GHzBand=1
+
+#Maximum number of offload peers supported
+# gMaxOffloadPeers=2
+
+# controlling the following offload patterns
+# through ini parameter. Default value is 1
+# to disable set it to zero. ssdp = 0
+# Setup multicast pattern for mDNS 224.0.0.251,
+# SSDP 239.255.255.250 and LLMNR 224.0.0.252
+ssdp=0
+
+#Enable Memory Deep Sleep
+gEnableMemDeepSleep=1
+
+# Regulatory Setting; 0=STRICT; 1=CUSTOM
+gRegulatoryChangeCountry=1
+
+# RA filtering rate limit param, the current value would not
+# help if the lifetime in RA is less than 3*60=3min. Then
+# we need to change it, though it is uncommon.
+# gRAFilterEnable=0
+gRArateLimitInterval=600
+
+# Maximum number of concurrent connections
+gMaxConcurrentActiveSessions=3
+
+# Disable/Enable GreenAP
+# 0 to disable, 1 to enable, default: 1
+gEnableGreenAp=0
+
+# Radar PRI multiplier
+gDFSradarMappingPriMultiplier=4
+
+# ifdef VENDOR_EDIT
+#gPNOScanSupport=1
+# endif /* VENDOR_EDIT */
+
+#Enable/Disable LPASS support
+# 0 to disable, 1 to enable
+gEnableLpassSupport=1
+
+# Whether userspace country code setting shld have priority
+gCountryCodePriority=1
+
+# Enable(1)/Disable(0) SIFS burst
+gEnableSifsBurst=1
+
+# Enable or Disable Multi-user MIMO
+# 1=Enable (default), 0=Disable
+gEnableMuBformee=1
+
+# Enable/Disable channel avoidance for SAP in SCC scenario
+# 0 - disable
+# 1 - enable
+gSapSccChanAvoidance=0
+
+# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode
+gIbssTxSpEndInactivityTime=10
+
+# Enable support for TDLS
+#  0 - disable
+#  1 - enable
+gEnableTDLSSupport=1
+
+# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall
+# initiate TDLS Discovery towards a peer whenever setup criteria (throughput
+# and RSSI) is met and then will initiate teardown when teardown criteria
+# (idle packet count and RSSI) is met.
+#  0 - disable
+#  1 - enable
+gEnableTDLSImplicitTrigger=1
+
+# Enable TDLS External Control. That is, user space application has to
+# first configure a peer MAC in wlan driver towards which TDLS is desired.
+# Device will establish TDLS only towards those configured peers whenever
+# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS
+# when teardown criteria (idle packet count and RSSI) is met. However,
+# device will accept TDLS connection if it is initiated from any other peer,
+# even if that peer is not configured.
+#  0 - disable
+#  1 - enable
+# For TDLS External Control, Implicit Trigger must also be enabled.
+gTDLSExternalControl=1
+
+# Enable support for TDLS off-channel operation
+#  0 - disable
+#  1 - enable
+# TDLS off-channel operation will be invoked when there is only one
+# TDLS connection.
+gEnableTDLSOffChannel=1
+
+# Enable or Disable Random MAC (Spoofing)
+# 1=Enable, 0=Disable (default)
+gEnableMacAddrSpoof=0
+
+################ Datapath feature set Begin ################
+# Bus bandwidth threshold values in terms of number of packets
+gBusBandwidthHighThreshold=2000
+gBusBandwidthMediumThreshold=500
+gBusBandwidthLowThreshold=150
+
+# Bus bandwidth compute timeout value in ms
+gBusBandwidthComputeInterval=100
+
+# VHT Tx/Rx MCS values
+# Valid values are 0,1,2. If commented out, the default value is 0.
+# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
+gVhtRxMCS=2
+gVhtTxMCS=2
+
+# VHT Tx/Rx MCS values for 2x2
+# Valid values are 0,1,2. If commented out, the default value is 0.
+# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
+gEnable2x2=1
+gVhtRxMCS2x2=2
+gVhtTxMCS2x2=2
+
+#IPA config is a bit mask and following are the configurations.
+#bit0 IPA Enable
+#bit1 IPA PRE Filter enable
+#bit2 IPv6 enable
+#bit3 IPA Resource Manager (RM) enable
+#bit4 IPA Clock scaling enable
+#bit5 IPA uC ENABLE
+#bit6 IPA uC STA ENABLE
+#bit8 IPA Real Time Debugging
+gIPAConfig=0x7d
+gIPADescSize=800
+
+# Enable/Disable RX full reorder offload
+gReorderOffloadSupported=1
+
+# Enable CE classification
+# 1 - enable(default)  0 - disable
+gCEClassifyEnable=1
+
+# Enable Rx handling options
+# Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium)
+rx_mode=4
+
+# Enable(Tx) fastpath for data traffic.
+# 1 - enable(default)  0 - disable
+gEnableFastPath=1
+
+# This flag enables IP, TCP and UDP checksum offload
+# 1 - enable(default)  0 - disable
+gEnableIpTcpUdpChecksumOffload=1
+
+# Enable TCP Segmentation Offload
+# 1 - enable  0 - disable
+TSOEnable=1
+
+# Enable Large Recieve Offload
+# 1 - enable(default)  0 - disable
+LROEnable=1
+
+# Enable HT MPDU Density
+# 4 for 2 micro sec
+ght_mpdu_density=4
+
+# Enable flow steering to enable multiple CEs for Rx flows.
+# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs.
+# Parallel Rx paths.
+# 1 - enable 0 - disable(default)
+gEnableFlowSteering=1
+
+################ Datapath feature set End ################
+
+################ NAN feature set start ###################
+
+# Enable NAN discovery (NAN 1.0)
+# 1 - enable  0 - disable(default)
+gEnableNanSupport=1
+################ NAN feature set end #####################
+
+adaptive_dwell_mode_enabled=1
+
+hostscan_adaptive_dwell_mode=1
+
+adapt_dwell_lpf_weight=80
+
+adapt_dwell_wifi_act_threshold=10
+
+END
+
+# Note: Configuration parser would not read anything past the END marker
+
diff --git a/wifi/wpa_supplicant_overlay.conf b/wifi/wpa_supplicant_overlay.conf
index e1f530d..da28b4c 100644
--- a/wifi/wpa_supplicant_overlay.conf
+++ b/wifi/wpa_supplicant_overlay.conf
@@ -1,3 +1,5 @@
 disable_scan_offload=1
 p2p_disabled=1
 tdls_external_control=1
+interworking=1
+hs20=1