1 files changed, 0 insertions, 209 deletions
diff --git a/CleanSpec.mk b/CleanSpec.mk
deleted file mode 100644
index a532eb87..00000000
--- a/CleanSpec.mk
+++ /dev/null
@@ -1,209 +0,0 @@
-# Copyright 2017 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# If you don't need to do a full clean build but would like to touch
-# a file or delete some intermediate files, add a clean step to the end
-# of the list.  These steps will only be run once, if they haven't been
-# run before.
-#
-# E.g.:
-#     $(call add-clean-step, touch -c external/sqlite/sqlite3.h)
-#     $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES/libz_intermediates)
-#
-# Always use "touch -c" and "rm -f" or "rm -rf" to gracefully deal with
-# files that are missing or have been moved.
-#
-# Use $(PRODUCT_OUT) to get to the "out/target/product/blah/" directory.
-# Use $(OUT_DIR) to refer to the "out" directory.
-#
-# If you need to re-do something that's already mentioned, just copy
-# the command and add it to the bottom of the list.  E.g., if a change
-# that you made last week required touching a file and a change you
-# made today requires touching the same file, just copy the old
-# touch step and add it to the end of the list.
-#
-# ************************************************
-# NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
-# ************************************************
-
-# For example:
-#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/AndroidTests_intermediates)
-#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/core_intermediates)
-#$(call add-clean-step, find $(OUT_DIR) -type f -name "IGTalkSession*" -print0 | xargs -0 rm -f)
-#$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/*)
-
-$(call add-clean-step, rm -rf $(PRODUCT_OUT))
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor)
-
-# Remove /system/lib[64]/vndk-sp/libz.so
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib/vndk-sp/libz.so)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib64/vndk-sp/libz.so)
-
-# Remove Power HAL 1.2
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.power@1.2-service.bonito-libperfmgr.rc)
-
-# Remove Vibrator HAL 1.1
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.vibrator@1.1-service.bonito.rc)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.vibrator@1.1-service.bonito)
-
-# Remove /product mount point
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/product)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/product)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/product)
-
-# Remove android.hardware.audio*@2.0 implementation
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/lib/hw/android.hardware.audio*@2.0-impl.so)
-
-# Adds product.img
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/product)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/product)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/fonts)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/framework)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/media)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/priv-app)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/product)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/usr)
-
-# Remove default android.hardware.health@2.0-service
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.health@2.0-service)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.health@2.0-service.rc)
-
-# Remove healthd
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/bin/healthd)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/init/healthd.rc)
-
-# Remove KM3 RC
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.keymaster@3.0-service-qti.rc)
-
-# Remove Codec2.0 software process
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/hw/hardware.google.media.c2@1.0-service-software)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/hardware.google.media.c2@1.0-service-software.rc)
-
-# Remove default android.hardware.graphics.composer@2.1
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.graphics.composer@2.1-service)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.graphics.composer@2.1-service.rc)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/lib64/hw/android.hardware.graphics.composer@2.1-impl.so)
-
-# Remove StrongBox RC
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.keymaster@4.1-service.citadel.rc)
-
-# Migrate to versioned VNDK directory
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib/vndk-sp)
-
-# Remove non-qti-display mapper (b/79269048)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/lib/hw/android.hardware.graphics.mapper@2.0-impl.so)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/lib64/hw/android.hardware.graphics.mapper@2.0-impl.so)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/lib/hw/android.hardware.graphics.allocator@2.0-impl.so)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/lib64/hw/android.hardware.graphics.allocator@2.0-impl.so)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.graphics.allocator@2.0-service)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.graphics.allocator@2.0-service.rc)
-
-#AU300 cleanup
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/product)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/include)
-
-# Secure_element HAL for eSE1
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.secure_element@1.0-service.rc)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.secure_element@1.0-service)
-
-# Remove VR related files
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/thermal-engine-sargo-vr.conf)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/thermal-engine-bonito-vr.conf)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.vr@1.0-service.bonito.rc)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/permissions/android.hardware.vr.headtracking.xml)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/permissions/android.hardware.vr.high_performance.xml)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.vr@1.0-service.bonito)
-
-# Remove /product mount point
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/product)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/product)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/product)
-
-# Remove init.environ.rc to force product to be recreated on other devices
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/init.environ.rc)
-
-# Verified boot xml moved to /product
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.software.verified_boot.xml)
-
-# Move libnfc-nci.conf to /vendor
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/libnfc-nci.conf)
-
-# ThermalHAL 1.1
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.thermal@1.1-service.bonito.rc)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.thermal@1.1-service.bonito)
-
-# Move fingerprint input files to /vendor
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/usr/keylayout/uinput-fpc.kl)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/usr/idc/uinput-fpc.idc)
-
-# Recovery init files moved to recovery
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/init.recovery.*.rc)
-
-# Add product partition
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/product)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/product)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/fonts)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/framework)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/media)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/priv-app)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/product)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/usr)
-
-# Rename power HAL
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.power@1.3-service.bonito-libperfmgr.rc)
-
-# Remove generic atrace HAL
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.atrace@1.0-service.rc)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/vintf/manifest/android.hardware.atrace@1.0-service.xml)
-
-# Remove obsolete android.hardware.boot@1.0-impl-wrapper.recovery.so
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/system/lib64/hw/android.hardware.boot@1.0-impl-wrapper.recovery.so)
-
-# Vibrator HAL 1.2 renamed from 'bonito' to 'drv2624'
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.vibrator@1.2-service.bonito.rc)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.vibrator@1.2-service.bonito)
-
-# Vibrator HAL upgraded from 1-2 to 1-3
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.vibrator@1.2-service.drv2624.rc)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.vibrator@1.2-service.drv2624)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/vintf/manifest/android.hardware.vibrator@1.2-service.drv2624.xml)
-
-# Move android.hidl.base@1.0.so to system_ext
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib/android.hidl.base@1.0.so)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib64/android.hidl.base@1.0.so)
-
-# Removing GSI keys from the ramdisk.
-# Those keys will be embedded into VTS instead, to verify the GSI image in used.
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/first_stage_ramdisk/avb/q-gsi.avbpubkey)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/first_stage_ramdisk/avb/r-gsi.avbpubkey)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/first_stage_ramdisk/avb/s-gsi.avbpubkey)
-
-# Use stable aidl power HAL
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.power@1.3-service.pixel-libperfmgr.rc)
-
-# Update to USB HAL 1.3
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.usb@1.2-service.bonito)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.usb@1.2-service.bonito.rc)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/vintf/manifest/android.hardware.usb@1.2-service.bonito.xml)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.usb@1.3-service.bonito)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.usb@1.3-service.bonito.rc)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/vintf/manifest/android.hardware.usb@1.3-service.bonito.xml)