release-request-9ff446ef-fe26-4f50-a0f0-c1d38619140f-for-git_oc-mr1-release-4257899 snap-temp-L58400000090817127

Change-Id: I0f783258637b9aee5d5c2234a9fe92972b65f093

1 files changed, 20 insertions, 9 deletions

diff --git a/nfc/libnfc-nxp.muskie.conf b/nfc/libnfc-nxp.muskie.conf
index 393050d..9e13ceb 100644
--- a/nfc/libnfc-nxp.muskie.conf
+++ b/nfc/libnfc-nxp.muskie.conf
@@ -84,25 +84,32 @@ NXP_EXT_TVDD_CFG_1={20, 02, 0F, 01, A0, 0E, 0B, 31, 01, 01, 31, 00, 00, 00, 01,
 ###############################################################################
 #config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM,
 #monitoring 5V from DCDC, 3.3V for both RM and CM, DCDCWaitTime=4.2ms
-NXP_EXT_TVDD_CFG_2={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, C2, B2, 00, B2, 1E, 1F, 00, D0, 0C}
+NXP_EXT_TVDD_CFG_2={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, C2, B2, 00, BA, 1E, 18, 00, D0, 0C}
 
 ###############################################################################
 # NXP RF configuration ALM/PLM settings
 # This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_1={
-#}
+NXP_RF_CONF_BLK_1={
+20, 02, 22, 04,
+ A0, 0D, 03, 24, 03, 7E,
+ A0, 0D, 06, 34, 44, 66, 0A, 00, 00,
+ A0, 0D, 06, 06, 42, 00, 02, F4, F4,
+ A0, 0D, 06, 06, 37, 28, 76, 00, 00
+}
 
 ###############################################################################
 # NXP RF configuration ALM/PLM settings
 # This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_2={
-#}
+NXP_RF_CONF_BLK_2={
+20, 02, D6, 01, A0, 34, D2, 23, 04, 18, 47, 40, 00, 00, 40, 01, 10, 00, 00, 03, 1E, 00, 80, 02, 32, 00, B0, 00, 4B, 00, 30, 02, 67, 00, 38, 02, 99, 00, 38, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 00, 00, 00, 00, 00, 00, 47, 00, 00, 40, 01, 10, 00, 00, 03, 1E, 00, 80, 02, 32, 00, B0, 00, 4B, 00, 30, 02, 67, 00, 38, 02, 99, 00, 38, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 00, 00
+}
 
 ###############################################################################
 # NXP RF configuration ALM/PLM settings
 # This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_3={
-#}
+NXP_RF_CONF_BLK_3={
+20, 02, 5B, 01, A0, 0B, 57, F2, 12, 90, 78, 0F, 4E, 00, 3D, 95, 00, 00, 3D, 9F, 00, 00, 50, 9F, 00, 00, 59, 9F, 00, 00, 5A, 9F, 00, 00, 64, 9F, 00, 00, 65, 9F, 00, 00, 6E, 9F, 00, 00, 72, 9F, 00, 00, 79, 9F, 00, 00, 7B, 9F, 00, 00, 84, 9F, 00, 00, 86, 9F, 00, 00, 8F, 9F, 00, 00, 91, 9F, 00, 00, 9A, 9F, 00, 00, A1, 9F, 00, 00, A7, 9F, 00, 00, B0, 9F, 00, 00, B9, 1F, 00, 00
+}
 
 ###############################################################################
 # NXP RF configuration ALM/PLM settings
@@ -144,7 +151,7 @@ NXP_SET_CONFIG_ALWAYS=0x00
 # UICC2 bit rate A0D1
 # SWP1A interface A0D4
 # DWP intf behavior config, SVDD Load activated by default if set to 0x31 A037
-NXP_CORE_CONF_EXTN={20, 02, 29, 0A,
+NXP_CORE_CONF_EXTN={20, 02, 29, 0E,
     A0, EC, 01, 01,
     A0, ED, 01, 01,
     A0, 5E, 01, 01,
@@ -154,7 +161,11 @@ NXP_CORE_CONF_EXTN={20, 02, 29, 0A,
     A0, D4, 01, 00,
     A0, 37, 01, 35,
     A0, D8, 01, 02,
-    A0, D5, 01, 0A
+    A0, D5, 01, 0A,
+    A0, 43, 01, 00,
+    A0, B1, 02, 8C, 0A,
+    A0, 38, 04, 0A, 06, 06, 00,
+    A0, 3A, 08, 0E, 01, 0E, 01, 0E, 01, 0E, 01
    }
 
 ###############################################################################