condor: decommonize power and brightness overlays

Change-Id: I646ad03c00a79935828157145ca66bc4b4f1012f

2 files changed, 128 insertions, 0 deletions

diff --git a/overlay/frameworks/base/core/res/res/values/config.xml b/overlay/frameworks/base/core/res/res/values/config.xml
new file mode 100644
index 0000000..047c575
--- /dev/null
+++ b/overlay/frameworks/base/core/res/res/values/config.xml
@@ -0,0 +1,88 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2013, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+
+    <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support.
+         The N entries of this array define N  1 zones as follows:
+
+         Zone 0:        0 <= LUX < array[0]
+         Zone 1:        array[0] <= LUX < array[1]
+         ...
+         Zone N:        array[N - 1] <= LUX < array[N]
+         Zone N + 1     array[N] <= LUX < infinity
+
+         Must be overridden in platform specific overlays -->
+    <integer-array name="config_autoBrightnessLevels">
+        <item>10</item>
+        <item>50</item>
+        <item>100</item>
+        <item>150</item>
+        <item>400</item>
+        <item>1400</item>
+        <item>3000</item>
+        <item>6000</item>
+        <item>8000</item>
+    </integer-array>
+
+    <!-- Array of output values for LCD backlight corresponding to the LUX values
+         in the config_autoBrightnessLevels array.  This array should have size one greater
+         than the size of the config_autoBrightnessLevels array.
+         This must be overridden in platform specific overlays -->
+    <integer-array name="config_autoBrightnessLcdBacklightValues">
+        <item>11</item>
+        <item>23</item>
+        <item>48</item>
+        <item>70</item>
+        <item>89</item>
+        <item>133</item>
+        <item>181</item>
+        <item>249</item>
+        <item>255</item>
+        <item>255</item>
+    </integer-array>
+
+    <!-- Array of output values for button backlight corresponding to the LUX values
+         in the config_autoBrightnessLevels array.  This array should have size one greater
+         than the size of the config_autoBrightnessLevels array.
+         This must be overridden in platform specific overlays -->
+    <integer-array name="config_autoBrightnessButtonBacklightValues">
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
+    </integer-array>
+
+    <!-- Minimum screen brightness allowed by the power manager. -->
+    <integer name="config_screenBrightnessDim">10</integer>
+
+    <!-- Default screen brightness setting.
+         Must be in the range specified by minimum and maximum. -->
+    <integer name="config_screenBrightnessSettingDefault">120</integer>
+
+    <!-- Minimum screen brightness setting allowed by the power manager.
+         The user is forbidden from setting the brightness below this level. -->
+    <integer name="config_screenBrightnessSettingMinimum">10</integer>
+
+</resources>
diff --git a/overlay/frameworks/base/core/res/res/xml/power_profile.xml b/overlay/frameworks/base/core/res/res/xml/power_profile.xml
new file mode 100644
index 0000000..f27a74e
--- /dev/null
+++ b/overlay/frameworks/base/core/res/res/xml/power_profile.xml
@@ -0,0 +1,40 @@
+<?xml version="1.0" encoding="utf-8"?>
+<device name="Android">
+    <item name="none">0</item>
+    <item name="screen.on">73</item>
+    <item name="screen.full">238</item>
+    <item name="bluetooth.active">30</item>
+    <item name="bluetooth.on">3</item>
+    <item name="wifi.on">2</item>
+    <item name="wifi.active">50</item>
+    <item name="wifi.scan">100</item>
+    <item name="gps.on">70</item>
+    <item name="radio.active">250</item>
+    <item name="radio.scanning">10</item>
+    <array name="radio.on">
+        <value>10</value>
+        <value>8</value>
+        <value>6</value>
+        <value>4</value>
+        <value>2</value>
+    </array>
+    <array name="cpu.speeds">
+        <value>300000</value>
+        <value>384000</value>
+        <value>600000</value>
+        <value>787200</value>
+        <value>998400</value>
+        <value>1190400</value>
+    </array>
+    <item name="cpu.idle">2</item>
+    <item name="cpu.awake">22</item>
+    <array name="cpu.active">
+        <value>40</value>
+        <value>45</value>
+        <value>66</value>
+        <value>78</value>
+        <value>143</value>
+        <value>160</value>
+    </array>
+    <item name="battery.capacity">1980</item>
+</device>
\ No newline at end of file