path: root/drivers/power/Kconfig

menuconfig POWER_SUPPLY
	tristate "Power supply class support"
	help
	  Say Y here to enable power supply class support. This allows
	  power supply (batteries, AC, USB) monitoring by userspace
	  via sysfs and uevent (if available) and/or APM kernel interface
	  (if selected below).

if POWER_SUPPLY

config POWER_SUPPLY_DEBUG
	bool "Power supply debug"
	help
	  Say Y here to enable debugging messages for power supply class
	  and drivers.

config PDA_POWER
	tristate "Generic PDA/phone power driver"
	depends on !S390
	help
	  Say Y here to enable generic power driver for PDAs and phones with
	  one or two external power supplies (AC/USB) connected to main and
	  backup batteries, and optional builtin charger.

config APM_POWER
	tristate "APM emulation for class batteries"
	depends on APM_EMULATION
	help
	  Say Y here to enable support APM status emulation using
	  battery class devices.

config MAX8925_POWER
	tristate "MAX8925 battery charger support"
	depends on MFD_MAX8925
	help
	  Say Y here to enable support for the battery charger in the Maxim
	  MAX8925 PMIC.

config WM831X_BACKUP
	tristate "WM831X backup battery charger support"
	depends on MFD_WM831X
	help
	  Say Y here to enable support for the backup battery charger
	  in the Wolfson Microelectronics WM831x PMICs.

config WM831X_POWER
	tristate "WM831X PMU support"
	depends on MFD_WM831X
	help
	  Say Y here to enable support for the power management unit
	  provided by Wolfson Microelectronics WM831x PMICs.

config WM8350_POWER
        tristate "WM8350 PMU support"
        depends on MFD_WM8350
        help
          Say Y here to enable support for the power management unit
	  provided by the Wolfson Microelectronics WM8350 PMIC.

config TEST_POWER
	tristate "Test power driver"
	help
	  This driver is used for testing. It's safe to say M here.

config CHARGER_SMB345
        tristate "SMB345 battery charger driver"
        depends on I2C
        help
          Say Y here to enable support for battery charging with SMB345 chips.

config BATTERY_DS2760
	tristate "DS2760 battery driver (HP iPAQ & others)"
	depends on W1 && W1_SLAVE_DS2760
	help
	  Say Y here to enable support for batteries with ds2760 chip.

config BATTERY_DS2780
	tristate "DS2780 battery driver"
	depends on HAS_IOMEM
	select W1
	select W1_SLAVE_DS2780
	help
	  Say Y here to enable support for batteries with ds2780 chip.

config BATTERY_DS2781
	tristate "2781 battery driver"
	depends on HAS_IOMEM
	select W1
	select W1_SLAVE_DS2781
	help
	  If you enable this you will have the DS2781 battery driver support.

	  The battery monitor chip is used in many batteries/devices
	  as the one who is responsible for charging/discharging/monitoring
	  Li+ batteries.

	  If you are unsure, say N.

config BATTERY_DS2782
	tristate "DS2782/DS2786 standalone gas-gauge"
	depends on I2C
	help
	  Say Y here to enable support for the DS2782/DS2786 standalone battery
	  gas-gauge.

config BATTERY_PMU
	tristate "Apple PMU battery"
	depends on PPC32 && ADB_PMU
	help
	  Say Y here to expose battery information on Apple machines
	  through the generic battery class.

config BATTERY_OLPC
	tristate "One Laptop Per Child battery"
	depends on X86_32 && OLPC
	help
	  Say Y to enable support for the battery on the OLPC laptop.

config BATTERY_TOSA
	tristate "Sharp SL-6000 (tosa) battery"
	depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX
	help
	  Say Y to enable support for the battery on the Sharp Zaurus
	  SL-6000 (tosa) models.

config BATTERY_COLLIE
	tristate "Sharp SL-5500 (collie) battery"
	depends on SA1100_COLLIE && MCP_UCB1200
	help
	  Say Y to enable support for the battery on the Sharp Zaurus
	  SL-5500 (collie) models.

config BATTERY_WM97XX
	bool "WM97xx generic battery driver"
	depends on TOUCHSCREEN_WM97XX=y
	help
	  Say Y to enable support for battery measured by WM97xx aux port.

config BATTERY_SBS
        tristate "SBS Compliant gas gauge"
        depends on I2C
        help
	  Say Y to include support for SBS battery driver for SBS-compliant
	  gas gauges.

config BATTERY_BQ27x00
	tristate "BQ27x00 battery driver"
	help
	  Say Y here to enable support for batteries with BQ27x00 (I2C/HDQ) chips.

config BATTERY_BQ27X00_I2C
	bool "BQ27200/BQ27500 support"
	depends on BATTERY_BQ27x00
	depends on I2C
	default y
	help
	  Say Y here to enable support for batteries with BQ27x00 (I2C) chips.

config BATTERY_BQ27X00_PLATFORM
	bool "BQ27000 support"
	depends on BATTERY_BQ27x00
	default y
	help
	  Say Y here to enable support for batteries with BQ27000 (HDQ) chips.

config BATTERY_DA9030
	tristate "DA9030 battery driver"
	depends on PMIC_DA903X
	help
	  Say Y here to enable support for batteries charger integrated into
	  DA9030 PMIC.

config BATTERY_DA9052
	tristate "Dialog DA9052 Battery"
	depends on PMIC_DA9052
	depends on BROKEN
	help
	  Say Y here to enable support for batteries charger integrated into
	  DA9052 PMIC.

config BATTERY_MAX17040
	tristate "Maxim MAX17040 Fuel Gauge"
	depends on I2C
	help
	  MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries
	  in handheld and portable equipment. The MAX17040 is configured
	  to operate with a single lithium cell

config BATTERY_MAX17042
	tristate "Maxim MAX17042/8997/8966 Fuel Gauge"
	depends on I2C
	help
	  MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries
	  in handheld and portable equipment. The MAX17042 is configured
	  to operate with a single lithium cell. MAX8997 and MAX8966 are
	  multi-function devices that include fuel gauages that are compatible
	  with MAX17042.

config BATTERY_Z2
	tristate "Z2 battery driver"
	depends on I2C && MACH_ZIPIT2
	help
	  Say Y to include support for the battery on the Zipit Z2.

config BATTERY_S3C_ADC
	tristate "Battery driver for Samsung ADC based monitoring"
	depends on S3C_ADC
	help
	  Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery

config CHARGER_PCF50633
	tristate "NXP PCF50633 MBC"
	depends on MFD_PCF50633
	help
	 Say Y to include support for NXP PCF50633 Main Battery Charger.

config BATTERY_JZ4740
	tristate "Ingenic JZ4740 battery"
	depends on MACH_JZ4740
	depends on MFD_JZ4740_ADC
	help
	  Say Y to enable support for the battery on Ingenic JZ4740 based
	  boards.

	  This driver can be build as a module. If so, the module will be
	  called jz4740-battery.

config BATTERY_INTEL_MID
	tristate "Battery driver for Intel MID platforms"
	depends on INTEL_SCU_IPC && SPI
	help
	  Say Y here to enable the battery driver on Intel MID
	  platforms.

config CHARGER_ISP1704
	tristate "ISP1704 USB Charger Detection"
	depends on USB_OTG_UTILS
	help
	  Say Y to enable support for USB Charger Detection with
	  ISP1707/ISP1704 USB transceivers.

config CHARGER_MAX8903
	tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
	depends on GENERIC_HARDIRQS
	help
	  Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
	  The driver supports controlling charger-enable and current-limit
	  pins based on the status of charger connections with interrupt
	  handlers.

config CHARGER_TWL4030
	tristate "OMAP TWL4030 BCI charger driver"
	depends on TWL4030_CORE
	help
	  Say Y here to enable support for TWL4030 Battery Charge Interface.

config CHARGER_LP8727
	tristate "TI/National Semiconductor LP8727 charger driver"
	depends on I2C
	help
	  Say Y here to enable support for LP8727 Charger Driver.

config CHARGER_GPIO
	tristate "GPIO charger"
	depends on GPIOLIB
	help
	  Say Y to include support for chargers which report their online status
	  through a GPIO pin.

	  This driver can be build as a module. If so, the module will be
	  called gpio-charger.

config CHARGER_MANAGER
	bool "Battery charger manager for multiple chargers"
	depends on REGULATOR && RTC_CLASS
	help
          Say Y to enable charger-manager support, which allows multiple
          chargers attached to a battery and multiple batteries attached to a
          system. The charger-manager also can monitor charging status in
          runtime and in suspend-to-RAM by waking up the system periodically
          with help of suspend_again support.

config CHARGER_MAX8997
	tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
	depends on MFD_MAX8997 && REGULATOR_MAX8997
	help
	  Say Y to enable support for the battery charger control sysfs and
	  platform data of MAX8997/LP3974 PMICs.

config CHARGER_MAX8998
	tristate "Maxim MAX8998/LP3974 PMIC battery charger driver"
	depends on MFD_MAX8998 && REGULATOR_MAX8998
	help
	  Say Y to enable support for the battery charger control sysfs and
	  platform data of MAX8998/LP3974 PMICs.

config BATTERY_MSM
	tristate "MSM battery"
	depends on ARCH_MSM
	default m
	help
	  Say Y to enable support for the battery in Qualcomm MSM.

config BATTERY_MSM_FAKE
	tristate "Fake MSM battery"
	depends on ARCH_MSM && BATTERY_MSM
	default n
	help
	  Say Y to bypass actual battery queries.

config BATTERY_MSM8X60
	tristate "MSM8X60 battery"
	select PMIC8XXX_BATTALARM
	help
	  Some MSM boards have dual charging paths to charge the battery.
	  Say Y to enable support for the battery charging in
	  such devices.

config PM8058_CHARGER
	tristate "pmic8058 charger"
	depends on BATTERY_MSM8X60
	depends on PMIC8058
	help
	  Say Y to enable support for battery charging from the pmic8058.
	  pmic8058 provides a linear charging circuit connected to the usb
	  cable on Qualcomm's msm8x60 surf board.

config ISL9519_CHARGER
	tristate "isl9519 charger"
	depends on (BATTERY_MSM8X60 || PM8921_CHARGER)
	depends on I2C
	default n
	help
	  The isl9519q charger chip from intersil is connected to an external
	  charger cable and is preferred way of charging the battery because
	  of its high current rating.
	  Choose Y if you are compiling for Qualcomm's msm8x60 surf/ffa board.

config SMB137B_CHARGER
	tristate "smb137b charger"
	default n
	depends on I2C
	help
	  The smb137b charger chip from summit is a switching mode based
	  charging solution.
	  Choose Y if you are compiling for Qualcomm's msm8x60 fluid board.
	  To compile this driver as a module, choose M here: the module will
	  be called smb137b.

config SMB349_CHARGER
	tristate "smb349 charger"
	depends on I2C
	help
	  Say Y to enable support for the SMB349 switching mode based charger
	  and sysfs. The driver supports controlling charger-enable and
	  current limiting capabilities. The driver also lets the
	  SMB349 be operated as a slave device via the power supply
	  framework.

config PM8058_FIX_USB
	tristate "pmic8058 software workaround for usb removal"
	depends on PMIC8058
	depends on !PM8058_CHARGER
	help
	  Say Y to enable the software workaround to USB Vbus line
	  staying high even when USB cable is removed. This option
	  is in lieu of a complete pm8058 charging driver.

config BATTERY_QCIBAT
	tristate "Quanta Computer Inc. Battery"
	depends on SENSORS_WPCE775X
	default n
	help
	  Say Y here if you want to use the Quanta battery driver for ST15
	  platform.

config BATTERY_BQ27520
	tristate "BQ27520 battery driver"
	depends on I2C
	default n
	help
	  Say Y here to enable support for batteries with BQ27520 (I2C) chips.

config BQ27520_TEST_ENABLE
	bool "Enable BQ27520 Fuel Gauge Chip Test"
	depends on BATTERY_BQ27520
	default n
	help
	  Say Y here to enable Test sysfs Interface for BQ27520 Drivers.

config BATTERY_BQ27541
	tristate "BQ27541 battery driver"
	depends on I2C
	default n
	help
	  Say Y here to enable support for batteries with BQ27541 (I2C) chips.

config PM8921_CHARGER
	tristate "PM8921 Charger driver"
	depends on MFD_PM8921_CORE
	help
	  Say Y here to enable support for pm8921 chip charger subdevice

config PM8XXX_CCADC
	tristate "PM8XXX battery current adc driver"
	depends on MFD_PM8921_CORE
	help
	  Say Y here to enable support for pm8921 chip bms subdevice

config LTC4088_CHARGER
	tristate "LTC4088 Charger driver"
	depends on GPIOLIB
	help
	  Say Y here to enable support for ltc4088 chip charger. It controls the
	  operations through GPIO pins.

config PM8921_BMS
	select PM8XXX_CCADC
	tristate "PM8921 Battery Monitoring System driver"
	depends on MFD_PM8921_CORE
	help
	  Say Y here to enable support for pm8921 chip bms subdevice

config CHARGER_SMB347
	tristate "Summit Microelectronics SMB347 Battery Charger"
	depends on I2C
	help
	  Say Y to include support for Summit Microelectronics SMB347
	  Battery Charger.

config AB8500_BM
	bool "AB8500 Battery Management Driver"
	depends on AB8500_CORE && AB8500_GPADC
	help
	  Say Y to include support for AB5500 battery management.

config AB8500_BATTERY_THERM_ON_BATCTRL
	bool "Thermistor connected on BATCTRL ADC"
	depends on AB8500_BM
	help
	  Say Y to enable battery temperature measurements using
	  thermistor connected on BATCTRL ADC.

config WIRELESS_CHARGER
	bool "Wireless Charger Configuration"
	default n
	help
	  wireless charger configuration

config BQ51051B_CHARGER
	bool "TI BQ51051B Wireless Charging control Driver"
	depends on WIRELESS_CHARGER
	help
	  TI BQ51051B wireless charging control driver

config BATTERY_TEMP_CONTROL
	default n
	bool "Battery Temperature Control Configuration"
	help
	  Say Y to enable battery temperature control for safty.
	  It controls charging current depending on battery temperature.

config BATTERY_ASUS_BQ27541
	tristate "ASUS bq27541 battery driver"
	depends on I2C
	help
	  Say Y here to enable support for batteries with BQ27541 chip.

endif # POWER_SUPPLY