path: root/drivers/misc/smsc_hub.c

/* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/platform_device.h>
#include <linux/err.h>
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <linux/pinctrl/consumer.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/of_gpio.h>
#include <linux/of_device.h>
#include <linux/clk.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/smsc_hub.h>
#include <linux/module.h>
#include <mach/msm_xo.h>

static unsigned short normal_i2c[] = {
0, I2C_CLIENT_END };

struct hsic_hub {
	struct device *dev;
	struct smsc_hub_platform_data *pdata;
	struct i2c_client *client;
	struct msm_xo_voter *xo_handle;
	struct clk		*ref_clk;
	struct regulator	*hsic_hub_reg;
	struct regulator	*int_pad_reg, *hub_vbus_reg;
	bool enabled;
	struct pinctrl		*smsc_pinctrl;
};
static struct hsic_hub *smsc_hub;
static struct platform_driver smsc_hub_driver;

/* APIs for setting/clearing bits and for reading/writing values */
static inline int hsic_hub_get_u8(struct i2c_client *client, u8 reg)
{
	int ret;

	ret = i2c_smbus_read_byte_data(client, reg);
	if (ret < 0)
		pr_err("%s:i2c_read8 failed\n", __func__);
	return ret;
}

static inline int hsic_hub_get_u16(struct i2c_client *client, u8 reg)
{
	int ret;

	ret = i2c_smbus_read_word_data(client, reg);
	if (ret < 0)
		pr_err("%s:i2c_read16 failed\n", __func__);
	return ret;
}

static inline int hsic_hub_write_word_data(struct i2c_client *client, u8 reg,
						u16 value)
{
	int ret;

	ret = i2c_smbus_write_word_data(client, reg, value);
	if (ret)
		pr_err("%s:i2c_write16 failed\n", __func__);
	return ret;
}

static inline int hsic_hub_write_byte_data(struct i2c_client *client, u8 reg,
						u8 value)
{
	int ret;

	ret = i2c_smbus_write_byte_data(client, reg, value);
	if (ret)
		pr_err("%s:i2c_write_byte_data failed\n", __func__);
	return ret;
}

static inline int hsic_hub_set_bits(struct i2c_client *client, u8 reg,
					u8 value)
{
	int ret;

	ret = i2c_smbus_read_byte_data(client, reg);
	if (ret < 0) {
		pr_err("%s:i2c_read_byte_data failed\n", __func__);
		return ret;
	}
	return i2c_smbus_write_byte_data(client, reg, (ret | value));
}

static inline int hsic_hub_clear_bits(struct i2c_client *client, u8 reg,
					u8 value)
{
	int ret;

	ret = i2c_smbus_read_byte_data(client, reg);
	if (ret < 0) {
		pr_err("%s:i2c_read_byte_data failed\n", __func__);
		return ret;
	}
	return i2c_smbus_write_byte_data(client, reg, (ret & ~value));
}

static int smsc4604_send_connect_cmd(struct i2c_client *client)
{
	u8 buf[3];

	buf[0] = 0xAA;
	buf[1] = 0x55;
	buf[2] = 0x00;

	if (i2c_master_send(client, buf, 3) != 3) {
		dev_err(&client->dev, "%s: i2c send failed\n", __func__);
		return -EIO;
	}

	return 0;
}

static int i2c_hsic_hub_probe(struct i2c_client *client,
				const struct i2c_device_id *id)
{
	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA |
				     I2C_FUNC_SMBUS_WORD_DATA))
		return -EIO;

	switch (smsc_hub->pdata->model_id) {
	case SMSC3503_ID:
		/*
		 * CONFIG_N bit in SP_ILOCK register has to be set before
		 * changing other registers to change default configuration
		 * of hsic hub.
		 */
		hsic_hub_set_bits(client, SMSC3503_SP_ILOCK, CONFIG_N);

		/*
		 * Can change default configuartion like VID,PID,
		 * strings etc by writing new values to hsic hub registers
		 */
		hsic_hub_write_word_data(client, SMSC3503_VENDORID, 0x05C6);

		/*
		 * CONFIG_N bit in SP_ILOCK register has to be cleared
		 * for new values in registers to be effective after
		 * writing to other registers.
		 */
		hsic_hub_clear_bits(client, SMSC3503_SP_ILOCK, CONFIG_N);
		break;
	case SMSC4604_ID:
		/*
		 * SMSC4604 requires an I2C attach command to be issued
		 * if I2C bus is connected
		 */
		return smsc4604_send_connect_cmd(client);
	default:
		return -EINVAL;
	}

	return 0;
}

static int i2c_hsic_hub_remove(struct i2c_client *client)
{
	return 0;
}

static const struct i2c_device_id hsic_hub_id[] = {
	{"i2c_hsic_hub", 0},
	{}
};
MODULE_DEVICE_TABLE(i2c, hsichub_id);

static struct i2c_driver hsic_hub_driver = {
	.driver = {
		.name = "i2c_hsic_hub",
	},
	.probe    = i2c_hsic_hub_probe,
	.remove   = i2c_hsic_hub_remove,
	.id_table = hsic_hub_id,
};

static int msm_hsic_hub_init_clock(struct hsic_hub *hub, int init)
{
	int ret;

	/*
	 * xo_clk_gpio controls an external xo clock which feeds
	 * the hub reference clock. When this gpio is present,
	 * assume that no other clocks are required.
	 */
	if (hub->pdata->xo_clk_gpio)
		return 0;

	if (!init) {
		if (!IS_ERR(hub->ref_clk))
			clk_disable_unprepare(hub->ref_clk);
		else
			msm_xo_put(smsc_hub->xo_handle);

		return 0;
	}

	hub->ref_clk = devm_clk_get(hub->dev, "ref_clk");
	if (IS_ERR(hub->ref_clk)) {
		dev_dbg(hub->dev, "failed to get ref_clk\n");

		/* In the absence of dedicated ref_clk, xo clocks the HUB */
		smsc_hub->xo_handle = msm_xo_get(MSM_XO_TCXO_D1, "hsic_hub");
		if (IS_ERR(smsc_hub->xo_handle)) {
			dev_err(hub->dev, "not able to get the handle\n"
						 "for TCXO D1 buffer\n");
			return PTR_ERR(smsc_hub->xo_handle);
		}

		ret = msm_xo_mode_vote(smsc_hub->xo_handle, MSM_XO_MODE_ON);
		if (ret) {
			dev_err(hub->dev, "failed to vote for TCXO\n"
				"D1 buffer\n");
			msm_xo_put(smsc_hub->xo_handle);
			return ret;
		}
	} else {
		ret = clk_prepare_enable(hub->ref_clk);
		if (ret)
			dev_err(hub->dev, "clk_enable failed for ref_clk\n");
	}

	return ret;
}
#define HSIC_HUB_INT_VOL_MIN	1800000 /* uV */
#define HSIC_HUB_INT_VOL_MAX	2950000 /* uV */
static int msm_hsic_hub_init_gpio(struct hsic_hub *hub, int init)
{
	int ret = 0;
	struct pinctrl_state *set_state;
	struct smsc_hub_platform_data *pdata = hub->pdata;

	if (!init) {
		if (!IS_ERR(smsc_hub->int_pad_reg)) {
			regulator_disable(smsc_hub->int_pad_reg);
			regulator_set_voltage(smsc_hub->int_pad_reg, 0,
						HSIC_HUB_INT_VOL_MAX);
		}
		if (smsc_hub->smsc_pinctrl) {
			set_state = pinctrl_lookup_state(smsc_hub->smsc_pinctrl,
					"smsc_sleep");
			if (IS_ERR(set_state)) {
				pr_err("cannot get smsc pinctrl sleep state\n");
				ret = PTR_ERR(set_state);
				goto out;
			}
			ret = pinctrl_select_state(smsc_hub->smsc_pinctrl,
					set_state);
		}
		goto out;
	}

	/* Get pinctrl if target uses pinctrl */
	smsc_hub->smsc_pinctrl = devm_pinctrl_get(smsc_hub->dev);
	if (IS_ERR(smsc_hub->smsc_pinctrl)) {
		if (of_property_read_bool(smsc_hub->dev->of_node,
					"pinctrl-names")) {
			dev_err(smsc_hub->dev, "Error encountered while getting pinctrl");
			ret = PTR_ERR(smsc_hub->smsc_pinctrl);
			goto out;
		}
		dev_dbg(smsc_hub->dev, "Target does not use pinctrl\n");
		smsc_hub->smsc_pinctrl = NULL;
	}

	if (smsc_hub->smsc_pinctrl) {
		set_state = pinctrl_lookup_state(smsc_hub->smsc_pinctrl,
				"smsc_active");
		if (IS_ERR(set_state)) {
			pr_err("cannot get smsc pinctrl active state\n");
			ret = PTR_ERR(set_state);
			goto out;
		}
		ret = pinctrl_select_state(smsc_hub->smsc_pinctrl, set_state);
		if (ret) {
			pr_err("cannot set smsc pinctrl active state\n");
			goto out;
		}
	}

	ret = devm_gpio_request(hub->dev, pdata->hub_reset, "HSIC_HUB_RESET");
	if (ret < 0) {
		dev_err(hub->dev, "gpio request failed for GPIO%d\n",
							pdata->hub_reset);
		goto out;
	}

	if (IS_ERR_OR_NULL(smsc_hub->smsc_pinctrl)) {
		if (pdata->refclk_gpio) {
			ret = devm_gpio_request(hub->dev, pdata->refclk_gpio,
					"HSIC_HUB_CLK");
			if (ret < 0)
				dev_err(hub->dev, "gpio request failed (CLK GPIO)\n");
		}

		if (pdata->xo_clk_gpio) {
			ret = devm_gpio_request(hub->dev, pdata->xo_clk_gpio,
					"HSIC_HUB_XO_CLK");
			if (ret < 0) {
				dev_err(hub->dev, "gpio request failed(XO CLK GPIO)\n");
				goto out;
			}
		}

		if (pdata->int_gpio) {
			ret = devm_gpio_request(hub->dev, pdata->int_gpio,
					"HSIC_HUB_INT");
			if (ret < 0) {
				dev_err(hub->dev, "gpio request failed (INT GPIO)\n");
				goto out;
			}
		}
	}
	if (of_get_property(smsc_hub->dev->of_node, "hub-int-supply", NULL)) {
		/* Enable LDO if required for external pull-up */
		smsc_hub->int_pad_reg = devm_regulator_get(hub->dev, "hub-int");
		if (IS_ERR(smsc_hub->int_pad_reg)) {
			dev_dbg(hub->dev, "unable to get ext hub_int reg\n");
		} else {
			ret = regulator_set_voltage(smsc_hub->int_pad_reg,
						HSIC_HUB_INT_VOL_MIN,
						HSIC_HUB_INT_VOL_MAX);
			if (ret) {
				dev_err(hub->dev, "unable to set the voltage\n"
						" for hsic hub int reg\n");
				goto out;
			}
			ret = regulator_enable(smsc_hub->int_pad_reg);
			if (ret) {
				dev_err(hub->dev, "unable to enable int reg\n");
				regulator_set_voltage(smsc_hub->int_pad_reg, 0,
							HSIC_HUB_INT_VOL_MAX);
				goto out;
			}
		}
	}
out:
	return ret;
}

#define HSIC_HUB_VDD_VOL_MIN	1650000 /* uV */
#define HSIC_HUB_VDD_VOL_MAX	1950000 /* uV */
#define HSIC_HUB_VDD_LOAD	36000	/* uA */
static int msm_hsic_hub_init_vdd(struct hsic_hub *hub, int init)
{
	int ret;

	if (!of_get_property(hub->dev->of_node, "ext-hub-vddio-supply", NULL))
		return 0;

	if (!init) {
		if (!IS_ERR(smsc_hub->hsic_hub_reg)) {
			regulator_disable(smsc_hub->hsic_hub_reg);
			regulator_set_optimum_mode(smsc_hub->hsic_hub_reg, 0);
			regulator_set_voltage(smsc_hub->hsic_hub_reg, 0,
							HSIC_HUB_VDD_VOL_MAX);
		}
		return 0;
	}

	smsc_hub->hsic_hub_reg = devm_regulator_get(hub->dev, "ext-hub-vddio");
	if (IS_ERR(smsc_hub->hsic_hub_reg)) {
		dev_dbg(hub->dev, "unable to get ext hub vddcx\n");
	} else {
		ret = regulator_set_voltage(smsc_hub->hsic_hub_reg,
				HSIC_HUB_VDD_VOL_MIN,
				HSIC_HUB_VDD_VOL_MAX);
		if (ret) {
			dev_err(hub->dev, "unable to set the voltage\n"
						"for hsic hub reg\n");
			return ret;
		}

		ret = regulator_set_optimum_mode(smsc_hub->hsic_hub_reg,
					HSIC_HUB_VDD_LOAD);
		if (ret < 0) {
			dev_err(hub->dev, "Unable to set mode of VDDCX\n");
			goto reg_optimum_mode_fail;
		}

		ret = regulator_enable(smsc_hub->hsic_hub_reg);
		if (ret) {
			dev_err(hub->dev, "unable to enable ext hub vddcx\n");
			goto reg_enable_fail;
		}
	}

	return 0;

reg_enable_fail:
	regulator_set_optimum_mode(smsc_hub->hsic_hub_reg, 0);
reg_optimum_mode_fail:
	regulator_set_voltage(smsc_hub->hsic_hub_reg, 0,
				HSIC_HUB_VDD_VOL_MAX);

	return ret;
}

static int smsc_hub_enable(struct hsic_hub *hub)
{
	struct smsc_hub_platform_data *pdata = hub->pdata;
	struct of_dev_auxdata *hsic_host_auxdata = dev_get_platdata(hub->dev);
	struct device_node *node = hub->dev->of_node;
	int ret;

	ret = gpio_direction_output(pdata->xo_clk_gpio, 1);
	if (ret < 0) {
		dev_err(hub->dev, "fail to enable xo clk\n");
		return ret;
	}

	ret = gpio_direction_output(pdata->hub_reset, 0);
	if (ret < 0) {
		dev_err(hub->dev, "fail to assert reset\n");
		goto disable_xo;
	}
	udelay(5);
	ret = gpio_direction_output(pdata->hub_reset, 1);
	if (ret < 0) {
		dev_err(hub->dev, "fail to de-assert reset\n");
		goto disable_xo;
	}

	ret = of_platform_populate(node, NULL, hsic_host_auxdata,
			hub->dev);
	if (ret < 0) {
		dev_err(smsc_hub->dev, "fail to add child with %d\n",
				ret);
		goto reset;
	}

	pm_runtime_allow(hub->dev);

	return 0;

reset:
	gpio_direction_output(pdata->hub_reset, 0);
disable_xo:
	gpio_direction_output(pdata->xo_clk_gpio, 0);

	return ret;
}

static int sms_hub_remove_child(struct device *dev, void *data)
{
	struct platform_device *pdev = to_platform_device(dev);

	/*
	 * Runtime PM is disabled before the driver's remove method
	 * is called.  So resume the device before unregistering
	 * the device. Don't worry about the PM usage counter as
	 * the device will be freed.
	 */
	pm_runtime_get_sync(dev);
	of_device_unregister(pdev);

	return 0;
}

static int smsc_hub_disable(struct hsic_hub *hub)
{
	struct smsc_hub_platform_data *pdata = hub->pdata;

	pm_runtime_forbid(hub->dev);
	device_for_each_child(hub->dev, NULL, sms_hub_remove_child);
	gpio_direction_output(pdata->hub_reset, 0);
	gpio_direction_output(pdata->xo_clk_gpio, 0);

	return 0;
}

static ssize_t smsc_hub_enable_show(struct device *dev,
			       struct device_attribute *attr, char *buf)
{
	return snprintf(buf, PAGE_SIZE, "%s\n", smsc_hub->enabled ?
						"enabled" : "disabled");
}

static ssize_t smsc_hub_enable_store(struct device *dev,
		struct device_attribute *attr, const char
		*buf, size_t size)
{

	bool enable;
	int val;
	int ret = size;

	if (sscanf(buf, "%d", &val) == 1) {
		enable = !!val;
	} else {
		ret = -EINVAL;
		goto out;
	}

	if (smsc_hub->enabled == enable)
		goto out;

	if (enable)
		ret = smsc_hub_enable(smsc_hub);
	else
		ret = smsc_hub_disable(smsc_hub);

	pr_debug("smsc hub %s status %d\n", enable ?
			"Enable" : "Disable", ret);
	if (!ret) {
		ret = size;
		smsc_hub->enabled = enable;
	}
out:
	return ret;
}

static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR, smsc_hub_enable_show,
			smsc_hub_enable_store);

struct smsc_hub_platform_data *msm_hub_dt_to_pdata(
				struct platform_device *pdev)
{
	int rc;
	u32 temp_val;
	struct device_node *node = pdev->dev.of_node;
	struct smsc_hub_platform_data *pdata;

	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
	if (!pdata) {
		dev_err(&pdev->dev, "unable to allocate platform data\n");
		return ERR_PTR(-ENOMEM);
	}

	rc = of_property_read_u32(node, "smsc,model-id", &temp_val);
	if (rc) {
		dev_err(&pdev->dev, "Unable to read smsc,model-id\n");
		return ERR_PTR(rc);
	} else {
		pdata->model_id = temp_val;
		if (pdata->model_id == 0)
			return pdata;
	}

	pdata->hub_reset = of_get_named_gpio(node, "smsc,reset-gpio", 0);
	if (pdata->hub_reset < 0)
		return ERR_PTR(pdata->hub_reset);

	pdata->refclk_gpio = of_get_named_gpio(node, "smsc,refclk-gpio", 0);
	if (pdata->refclk_gpio < 0)
		pdata->refclk_gpio = 0;

	pdata->int_gpio = of_get_named_gpio(node, "smsc,int-gpio", 0);
	if (pdata->int_gpio < 0)
		pdata->int_gpio = 0;

	pdata->xo_clk_gpio = of_get_named_gpio(node, "smsc,xo-clk-gpio", 0);
	if (pdata->xo_clk_gpio < 0)
		pdata->xo_clk_gpio = 0;

	return pdata;
}

static int smsc_hub_probe(struct platform_device *pdev)
{
	int ret = 0;
	struct smsc_hub_platform_data *pdata;
	struct device_node *node = pdev->dev.of_node;
	struct i2c_adapter *i2c_adap;
	struct i2c_board_info i2c_info;
	struct of_dev_auxdata *hsic_host_auxdata = NULL;

	if (pdev->dev.of_node) {
		dev_dbg(&pdev->dev, "device tree enabled\n");
		hsic_host_auxdata = dev_get_platdata(&pdev->dev);
		pdata = msm_hub_dt_to_pdata(pdev);
		if (IS_ERR(pdata))
			return PTR_ERR(pdata);
	} else {
		pdata = pdev->dev.platform_data;
	}

	if (!pdata) {
		dev_err(&pdev->dev, "No platform data\n");
		return -ENODEV;
	}

	if (pdata->model_id == 0) {
		dev_dbg(&pdev->dev, "standalone HSIC config enabled\n");
		return of_platform_populate(node, NULL,
				hsic_host_auxdata, &pdev->dev);
	}

	if (!pdata->hub_reset)
		return -EINVAL;

	smsc_hub = devm_kzalloc(&pdev->dev, sizeof(*smsc_hub), GFP_KERNEL);
	if (!smsc_hub)
		return -ENOMEM;

	smsc_hub->dev = &pdev->dev;
	smsc_hub->pdata = pdata;

	if (of_get_property(pdev->dev.of_node, "hub-vbus-supply", NULL)) {
		smsc_hub->hub_vbus_reg = devm_regulator_get(&pdev->dev,
				"hub-vbus");
		ret = PTR_ERR(smsc_hub->hub_vbus_reg);
		if (ret == -EPROBE_DEFER) {
			dev_dbg(&pdev->dev, "failed to get hub_vbus\n");
			return ret;
		}
	}

	ret = msm_hsic_hub_init_vdd(smsc_hub, 1);
	if (ret) {
		dev_err(&pdev->dev, "failed to init hub VDD\n");
		return ret;
	}
	ret = msm_hsic_hub_init_clock(smsc_hub, 1);
	if (ret) {
		dev_err(&pdev->dev, "failed to init hub clock\n");
		goto uninit_vdd;
	}
	ret = msm_hsic_hub_init_gpio(smsc_hub, 1);
	if (ret) {
		dev_err(&pdev->dev, "failed to init hub gpios\n");
		goto uninit_clock;
	}

	if (pdata->model_id == SMSC3502_ID) {
		ret = device_create_file(&pdev->dev, &dev_attr_enable);
		if (ret < 0) {
			dev_err(&pdev->dev, "fail to create sysfs file\n");
			goto uninit_gpio;
		}
		pm_runtime_forbid(&pdev->dev);
		goto done;
	}

	gpio_direction_output(pdata->hub_reset, 0);
	/*
	 * Hub reset should be asserted for minimum 2microsec
	 * before deasserting.
	 */
	udelay(5);
	gpio_direction_output(pdata->hub_reset, 1);

	if (!IS_ERR_OR_NULL(smsc_hub->hub_vbus_reg)) {
		ret = regulator_enable(smsc_hub->hub_vbus_reg);
		if (ret) {
			dev_err(&pdev->dev, "unable to enable hub_vbus\n");
			goto uninit_gpio;
		}
	}

	ret = i2c_add_driver(&hsic_hub_driver);
	if (ret < 0) {
		dev_err(&pdev->dev, "failed to add I2C hsic_hub_driver\n");
		goto i2c_add_fail;
	}
	usleep_range(10000, 12000);
	i2c_adap = i2c_get_adapter(SMSC_GSBI_I2C_BUS_ID);

	if (!i2c_adap) {
		dev_err(&pdev->dev, "failed to get i2c adapter\n");
		i2c_del_driver(&hsic_hub_driver);
		goto i2c_add_fail;
	}

	memset(&i2c_info, 0, sizeof(struct i2c_board_info));
	strlcpy(i2c_info.type, "i2c_hsic_hub", I2C_NAME_SIZE);

	/* 250ms delay is required for SMSC4604 HUB to get I2C up */
	msleep(250);

	/* Assign I2C slave address per SMSC model */
	switch (pdata->model_id) {
	case SMSC3503_ID:
		normal_i2c[0] = SMSC3503_I2C_ADDR;
		break;
	case SMSC4604_ID:
		normal_i2c[0] = SMSC4604_I2C_ADDR;
		break;
	default:
		dev_err(&pdev->dev, "unsupported SMSC model-id\n");
		i2c_put_adapter(i2c_adap);
		i2c_del_driver(&hsic_hub_driver);
		goto uninit_gpio;
	}

	smsc_hub->client = i2c_new_probed_device(i2c_adap, &i2c_info,
						   normal_i2c, NULL);
	i2c_put_adapter(i2c_adap);

i2c_add_fail:
	ret = of_platform_populate(node, NULL, hsic_host_auxdata, &pdev->dev);
	if (ret) {
		dev_err(&pdev->dev, "failed to add child node, ret=%d\n", ret);
		goto uninit_gpio;
	}

	smsc_hub->enabled = true;

	if (!smsc_hub->client)
		dev_err(&pdev->dev,
			"failed to connect to smsc_hub through I2C\n");

done:
	pm_runtime_set_active(&pdev->dev);
	pm_runtime_enable(&pdev->dev);

	return 0;

uninit_gpio:
	msm_hsic_hub_init_gpio(smsc_hub, 0);
uninit_clock:
	msm_hsic_hub_init_clock(smsc_hub, 0);
uninit_vdd:
	msm_hsic_hub_init_vdd(smsc_hub, 0);

	return ret;
}

static int smsc_hub_remove(struct platform_device *pdev)
{
	const struct smsc_hub_platform_data *pdata;

	if (!smsc_hub)
		return 0;

	pdata = smsc_hub->pdata;
	if (pdata->model_id == SMSC3502_ID)
		device_remove_file(&pdev->dev, &dev_attr_enable);
	if (smsc_hub->client) {
		i2c_unregister_device(smsc_hub->client);
		smsc_hub->client = NULL;
		i2c_del_driver(&hsic_hub_driver);
	}
	pm_runtime_disable(&pdev->dev);

	if (!IS_ERR_OR_NULL(smsc_hub->hub_vbus_reg))
		regulator_disable(smsc_hub->hub_vbus_reg);
	msm_hsic_hub_init_gpio(smsc_hub, 0);
	msm_hsic_hub_init_clock(smsc_hub, 0);
	msm_hsic_hub_init_vdd(smsc_hub, 0);

	return 0;
}

#ifdef CONFIG_PM_RUNTIME
static int msm_smsc_runtime_idle(struct device *dev)
{
	dev_dbg(dev, "SMSC HUB runtime idle\n");

	return 0;
}

static int smsc_hub_lpm_enter(struct device *dev)
{
	int ret = 0;

	if (!smsc_hub || !smsc_hub->enabled)
		return 0;

	if (smsc_hub->xo_handle) {
		ret = msm_xo_mode_vote(smsc_hub->xo_handle, MSM_XO_MODE_OFF);
		if (ret) {
			pr_err("%s: failed to devote for TCXO\n"
				"D1 buffer%d\n", __func__, ret);
		}
	} else if (smsc_hub->pdata->xo_clk_gpio) {
		gpio_direction_output(smsc_hub->pdata->xo_clk_gpio, 0);
	}

	return ret;
}

static int smsc_hub_lpm_exit(struct device *dev)
{
	int ret = 0;

	if (!smsc_hub || !smsc_hub->enabled)
		return 0;

	if (smsc_hub->xo_handle) {
		ret = msm_xo_mode_vote(smsc_hub->xo_handle, MSM_XO_MODE_ON);
		if (ret) {
			pr_err("%s: failed to vote for TCXO\n"
				"D1 buffer%d\n", __func__, ret);
		}
	} else if (smsc_hub->pdata->xo_clk_gpio) {
		gpio_direction_output(smsc_hub->pdata->xo_clk_gpio, 1);
	}

	return ret;
}
#endif

#ifdef CONFIG_PM
static const struct dev_pm_ops smsc_hub_dev_pm_ops = {
	SET_SYSTEM_SLEEP_PM_OPS(smsc_hub_lpm_enter, smsc_hub_lpm_exit)
	SET_RUNTIME_PM_OPS(smsc_hub_lpm_enter, smsc_hub_lpm_exit,
				msm_smsc_runtime_idle)
};
#endif

static const struct of_device_id hsic_hub_dt_match[] = {
	{ .compatible = "qcom,hsic-smsc-hub",
	},
	{}
};
MODULE_DEVICE_TABLE(of, hsic_hub_dt_match);

static struct platform_driver smsc_hub_driver = {
	.driver = {
		.name = "msm_smsc_hub",
		.owner = THIS_MODULE,
#ifdef CONFIG_PM
		.pm = &smsc_hub_dev_pm_ops,
#endif
		.of_match_table = hsic_hub_dt_match,
	},
	.probe = smsc_hub_probe,
	.remove = smsc_hub_remove,
};

static int __init smsc_hub_init(void)
{
	return platform_driver_register(&smsc_hub_driver);
}

static void __exit smsc_hub_exit(void)
{
	platform_driver_unregister(&smsc_hub_driver);
}
subsys_initcall(smsc_hub_init);
module_exit(smsc_hub_exit);

MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("SMSC HSIC HUB driver");