Merge 4.14.202 into kernel.lnx.4.14.r4-relHEADr11.0q10.0

Changes in 4.14.202: (19 commits)
        Bluetooth: fix kernel oops in store_pending_adv_report
        Bluetooth: A2MP: Fix not initializing all members
        Bluetooth: L2CAP: Fix calling sk_filter on non-socket based channel
        Bluetooth: MGMT: Fix not checking if BT_HS is enabled
        Bluetooth: Consolidate encryption handling in hci_encrypt_cfm
        Bluetooth: Fix update of connection state in `hci_encrypt_cfm`
        Bluetooth: Disconnect if E0 is used for Level 4
        media: usbtv: Fix refcounting mixup
        USB: serial: option: add Cellient MPL200 card
        USB: serial: option: Add Telit FT980-KS composition
        staging: comedi: check validity of wMaxPacketSize of usb endpoints found
        USB: serial: pl2303: add device-id for HP GC device
        USB: serial: ftdi_sio: add support for FreeCalypso JTAG+UART adapters
        reiserfs: Initialize inode keys properly
        reiserfs: Fix oops during mount
        drivers/net/ethernet/marvell/mvmdio.c: Fix non OF case
        crypto: bcm - Verify GCM/CCM key length in setkey
        crypto: qat - check cipher length for aead AES-CBC-HMAC-SHA
        Linux 4.14.202

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>

10 files changed, 63 insertions, 9 deletions

diff --git a/drivers/crypto/bcm/cipher.c b/drivers/crypto/bcm/cipher.c
index 279e907590e9..af6119b3b6b7 100644
--- a/drivers/crypto/bcm/cipher.c
+++ b/drivers/crypto/bcm/cipher.c
@@ -2981,7 +2981,6 @@ static int aead_gcm_ccm_setkey(struct crypto_aead *cipher,
 
 	ctx->enckeylen = keylen;
 	ctx->authkeylen = 0;
-	memcpy(ctx->enckey, key, ctx->enckeylen);
 
 	switch (ctx->enckeylen) {
 	case AES_KEYSIZE_128:
@@ -2997,6 +2996,8 @@ static int aead_gcm_ccm_setkey(struct crypto_aead *cipher,
 		goto badkey;
 	}
 
+	memcpy(ctx->enckey, key, ctx->enckeylen);
+
 	flow_log("  enckeylen:%u authkeylen:%u\n", ctx->enckeylen,
 		 ctx->authkeylen);
 	flow_dump("  enc: ", ctx->enckey, ctx->enckeylen);
@@ -3057,6 +3058,10 @@ static int aead_gcm_esp_setkey(struct crypto_aead *cipher,
 	struct iproc_ctx_s *ctx = crypto_aead_ctx(cipher);
 
 	flow_log("%s\n", __func__);
+
+	if (keylen < GCM_ESP_SALT_SIZE)
+		return -EINVAL;
+
 	ctx->salt_len = GCM_ESP_SALT_SIZE;
 	ctx->salt_offset = GCM_ESP_SALT_OFFSET;
 	memcpy(ctx->salt, key + keylen - GCM_ESP_SALT_SIZE, GCM_ESP_SALT_SIZE);
@@ -3085,6 +3090,10 @@ static int rfc4543_gcm_esp_setkey(struct crypto_aead *cipher,
 	struct iproc_ctx_s *ctx = crypto_aead_ctx(cipher);
 
 	flow_log("%s\n", __func__);
+
+	if (keylen < GCM_ESP_SALT_SIZE)
+		return -EINVAL;
+
 	ctx->salt_len = GCM_ESP_SALT_SIZE;
 	ctx->salt_offset = GCM_ESP_SALT_OFFSET;
 	memcpy(ctx->salt, key + keylen - GCM_ESP_SALT_SIZE, GCM_ESP_SALT_SIZE);
@@ -3114,6 +3123,10 @@ static int aead_ccm_esp_setkey(struct crypto_aead *cipher,
 	struct iproc_ctx_s *ctx = crypto_aead_ctx(cipher);
 
 	flow_log("%s\n", __func__);
+
+	if (keylen < CCM_ESP_SALT_SIZE)
+		return -EINVAL;
+
 	ctx->salt_len = CCM_ESP_SALT_SIZE;
 	ctx->salt_offset = CCM_ESP_SALT_OFFSET;
 	memcpy(ctx->salt, key + keylen - CCM_ESP_SALT_SIZE, CCM_ESP_SALT_SIZE);
diff --git a/drivers/crypto/qat/qat_common/qat_algs.c b/drivers/crypto/qat/qat_common/qat_algs.c
index baffae817259..bb875245644f 100644
--- a/drivers/crypto/qat/qat_common/qat_algs.c
+++ b/drivers/crypto/qat/qat_common/qat_algs.c
@@ -825,6 +825,11 @@ static int qat_alg_aead_dec(struct aead_request *areq)
 	struct icp_qat_fw_la_bulk_req *msg;
 	int digst_size = crypto_aead_authsize(aead_tfm);
 	int ret, ctr = 0;
+	u32 cipher_len;
+
+	cipher_len = areq->cryptlen - digst_size;
+	if (cipher_len % AES_BLOCK_SIZE != 0)
+		return -EINVAL;
 
 	ret = qat_alg_sgl_to_bufl(ctx->inst, areq->src, areq->dst, qat_req);
 	if (unlikely(ret))
@@ -839,7 +844,7 @@ static int qat_alg_aead_dec(struct aead_request *areq)
 	qat_req->req.comn_mid.src_data_addr = qat_req->buf.blp;
 	qat_req->req.comn_mid.dest_data_addr = qat_req->buf.bloutp;
 	cipher_param = (void *)&qat_req->req.serv_specif_rqpars;
-	cipher_param->cipher_length = areq->cryptlen - digst_size;
+	cipher_param->cipher_length = cipher_len;
 	cipher_param->cipher_offset = areq->assoclen;
 	memcpy(cipher_param->u.cipher_IV_array, areq->iv, AES_BLOCK_SIZE);
 	auth_param = (void *)((uint8_t *)cipher_param + sizeof(*cipher_param));
@@ -868,6 +873,9 @@ static int qat_alg_aead_enc(struct aead_request *areq)
 	uint8_t *iv = areq->iv;
 	int ret, ctr = 0;
 
+	if (areq->cryptlen % AES_BLOCK_SIZE != 0)
+		return -EINVAL;
+
 	ret = qat_alg_sgl_to_bufl(ctx->inst, areq->src, areq->dst, qat_req);
 	if (unlikely(ret))
 		return ret;
diff --git a/drivers/media/usb/usbtv/usbtv-core.c b/drivers/media/usb/usbtv/usbtv-core.c
index 50a61143898b..bf0e3908cdc4 100644
--- a/drivers/media/usb/usbtv/usbtv-core.c
+++ b/drivers/media/usb/usbtv/usbtv-core.c
@@ -113,7 +113,8 @@ static int usbtv_probe(struct usb_interface *intf,
 
 usbtv_audio_fail:
 	/* we must not free at this point */
-	usb_get_dev(usbtv->udev);
+	v4l2_device_get(&usbtv->v4l2_dev);
+	/* this will undo the v4l2_device_get() */
 	usbtv_video_free(usbtv);
 
 usbtv_video_fail:
diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c
index b6ff143c9cff..024688c90aa9 100644
--- a/drivers/net/ethernet/marvell/mvmdio.c
+++ b/drivers/net/ethernet/marvell/mvmdio.c
@@ -319,15 +319,25 @@ static int orion_mdio_probe(struct platform_device *pdev)
 
 	init_waitqueue_head(&dev->smi_busy_wait);
 
-	for (i = 0; i < ARRAY_SIZE(dev->clk); i++) {
-		dev->clk[i] = of_clk_get(pdev->dev.of_node, i);
-		if (PTR_ERR(dev->clk[i]) == -EPROBE_DEFER) {
+	if (pdev->dev.of_node) {
+		for (i = 0; i < ARRAY_SIZE(dev->clk); i++) {
+			dev->clk[i] = of_clk_get(pdev->dev.of_node, i);
+			if (PTR_ERR(dev->clk[i]) == -EPROBE_DEFER) {
+				ret = -EPROBE_DEFER;
+				goto out_clk;
+			}
+			if (IS_ERR(dev->clk[i]))
+				break;
+			clk_prepare_enable(dev->clk[i]);
+		}
+	} else {
+		dev->clk[0] = clk_get(&pdev->dev, NULL);
+		if (PTR_ERR(dev->clk[0]) == -EPROBE_DEFER) {
 			ret = -EPROBE_DEFER;
 			goto out_clk;
 		}
-		if (IS_ERR(dev->clk[i]))
-			break;
-		clk_prepare_enable(dev->clk[i]);
+		if (!IS_ERR(dev->clk[0]))
+			clk_prepare_enable(dev->clk[0]);
 	}
 
 	dev->err_interrupt = platform_get_irq(pdev, 0);
diff --git a/drivers/staging/comedi/drivers/vmk80xx.c b/drivers/staging/comedi/drivers/vmk80xx.c
index 1800eb3ae017..cdf86284dd04 100644
--- a/drivers/staging/comedi/drivers/vmk80xx.c
+++ b/drivers/staging/comedi/drivers/vmk80xx.c
@@ -676,6 +676,9 @@ static int vmk80xx_find_usb_endpoints(struct comedi_device *dev)
 	if (!devpriv->ep_rx || !devpriv->ep_tx)
 		return -ENODEV;
 
+	if (!usb_endpoint_maxp(devpriv->ep_rx) || !usb_endpoint_maxp(devpriv->ep_tx))
+		return -EINVAL;
+
 	return 0;
 }
 
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 3e2d3a96b559..8ed84338a626 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1032,6 +1032,11 @@ static const struct usb_device_id id_table_combined[] = {
 	/* U-Blox devices */
 	{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ZED_PID) },
 	{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ODIN_PID) },
+	/* FreeCalypso USB adapters */
+	{ USB_DEVICE(FTDI_VID, FTDI_FALCONIA_JTAG_BUF_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_FALCONIA_JTAG_UNBUF_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ }					/* Terminating entry */
 };
 
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index b5ca17a5967a..3d47c6d72256 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -39,6 +39,13 @@
 
 #define FTDI_LUMEL_PD12_PID	0x6002
 
+/*
+ * Custom USB adapters made by Falconia Partners LLC
+ * for FreeCalypso project, ID codes allocated to Falconia by FTDI.
+ */
+#define FTDI_FALCONIA_JTAG_BUF_PID	0x7150
+#define FTDI_FALCONIA_JTAG_UNBUF_PID	0x7151
+
 /* Sienna Serial Interface by Secyourit GmbH */
 #define FTDI_SIENNA_PID		0x8348
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index c2f1e49ea506..3fc14b377464 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -531,6 +531,7 @@ static void option_instat_callback(struct urb *urb);
 /* Cellient products */
 #define CELLIENT_VENDOR_ID			0x2692
 #define CELLIENT_PRODUCT_MEN200			0x9005
+#define CELLIENT_PRODUCT_MPL200			0x9025
 
 /* Hyundai Petatel Inc. products */
 #define PETATEL_VENDOR_ID			0x1ff4
@@ -1189,6 +1190,8 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = NCTRL(2) | RSVD(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1053, 0xff),	/* Telit FN980 (ECM) */
 	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1054, 0xff),	/* Telit FT980-KS */
+	  .driver_info = NCTRL(2) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
@@ -1985,6 +1988,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x02, 0x01) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x00, 0x00) },
 	{ USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
+	{ USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MPL200),
+	  .driver_info = RSVD(1) | RSVD(4) },
 	{ USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600A) },
 	{ USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600E) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TPLINK_VENDOR_ID, TPLINK_PRODUCT_LTE, 0xff, 0x00, 0x00) },	/* TP-Link LTE Module */
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 5051b1dad09e..7fb62dd77317 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -97,6 +97,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LD220TA_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LD381_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LD381GC_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LD960_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LD960TA_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LCM220_PRODUCT_ID) },
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index f0a9eeb6272d..c01b31a2a5d2 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -126,6 +126,7 @@
 
 /* Hewlett-Packard POS Pole Displays */
 #define HP_VENDOR_ID		0x03f0
+#define HP_LD381GC_PRODUCT_ID	0x0183
 #define HP_LM920_PRODUCT_ID	0x026b
 #define HP_TD620_PRODUCT_ID	0x0956
 #define HP_LD960_PRODUCT_ID	0x0b39